When --quiet is requested, gc --auto should not display messages unless
there is an error.
Signed-off-by: Tobias Ulmer <tobiasu@tmux.org>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We correctly handle completion items with spaces just fine,
since we pass the lists around with newline delimiters.
However, we do not handle filenames with shell
metacharacters, as "compgen -W" performs expansion on the
list we give it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were not testing ref or tree completion at all. Let's
give them even basic sanity checks to avoid regressions.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
l10n: de.po: correct translation of a 'rebase' message
l10n: Improve many translation for zh_CN
l10n: Unify the translation for '(un)expected'
The malloc checks in tests are currently disabled. Actually evaluate
the variable for turning them off and enable them if it's unset.
Also use this opportunity to give it the more descriptive and
consistent name TEST_NO_MALLOC_CHECK.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix bad translation of "Receiving objects".
Make translation of push.default message narrower, to make it fit 80
columns even when prefixed.
Signed-off-by: Peter Krefting <peter@softwolves.pp.se>
"git submodule" command DWIMs the command line and assumes a
unspecified action word for 'status' action. This is a UI mistake
that leads to a confusing behaviour. A mistyped command name is
instead treated as a request for 'status' of the submodule with that
name, e.g.
$ git submodule show
error: pathspec 'show' did not match any file(s) known to git.
Did you forget to 'git add'?
Stop DWIMming an unknown or mistyped subcommand name as pathspec
given to unspelled "status" subcommand. "git submodule" without any
argument is still interpreted as "git submodule status", but its
value is questionable.
Adjust t7400 to match, and stop advertising the default subcommand
being 'status' which does not help much in practice, other than
promoting laziness and confusion.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running "whatchanged --graph -m" on a simple two-head merges
can fall into infinite loop.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only the first test t0000 in the test suite made sure we have built
Git to be tested; move the check to test-lib so that it applies to
all tests equally.
* rr/test-make-sure-we-have-git:
t/test-lib: make sure Git has already been built
* js/poll-emu:
make poll() work on platforms that can't recv() on a non-socket
poll() exits too early with EFAULT if 1st arg is NULL
fix some win32 specific dependencies in poll.c
make poll available for other platforms lacking it
Run our test scripts with MALLOC_CHECK_ and MALLOC_PERTURB_, the
built-in memory access checking facility GNU libc has.
* ep/malloc-check-perturb:
MALLOC_CHECK: various clean-ups
Add MALLOC_CHECK_ and MALLOC_PERTURB_ libc env to the test suite for detecting heap corruption
When "git am" is fed an input that has multiple "Content-type: ..."
header, it did not grok charset= attribute correctly.
* jc/maint-mailinfo-mime-attr:
mailinfo: do not concatenate charset= attribute values from mime headers
Various documentation fixups.
* po/maint-docs:
Doc branch: show -vv option and alternative
Doc clean: add See Also link
Doc add: link gitignore
Doc: separate gitignore pattern sources
Doc: shallow clone deepens _to_ new depth
The codepath for handling "--tee" ends up relaunching the test
script under a shell, and that one has to be a Bourne. But we
incorrectly used $SHELL, which could be a non-Bourne (e.g. zsh or
csh); we have the Makefile variable $SHELL_PATH for exactly that,
so use it instead.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow users to override the default commands provided by the
mergetools/* scriptlets.
Users occasionally run into problems where they expect to be
able to override the built-in tool names. The documentation
does not explicitly mention that built-ins cannot be overridden,
so it's easy to assume that it should work.
Lift this restriction so that built-in tools are handled the
same way as user-configured tools. Add tests to guarantee this
behavior.
A nice benefit of this change is that it protects users from
having future versions of git trump their custom configuration
with a new built-in tool.
C.f.:
http://stackoverflow.com/questions/7435002/mergetool-from-gitconfig-being-ignoredhttp://thread.gmane.org/gmane.comp.version-control.msysgit/13188http://thread.gmane.org/gmane.comp.version-control.git/148267
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 25ae7cfd19.
That patch does fix expansion of weird variables in some
simple tests, but it also seems to break other things, like
expansion of refs by "git checkout".
While we're sorting out the correct solution, we are much
better with the original bug (people with metacharacters in
their completions occasionally see an error message) than
the current bug (ref completion does not work at all).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even during a conflicted merge, "git blame $path" always meant to
blame uncommitted changes to the "working tree" version; make it
more useful by showing cleanly merged parts as coming from the other
branch that is being merged.
This incidentally fixes an unrelated problem on a case insensitive
filesystem, where "git blame MAKEFILE" run in a history that has
"Makefile" but not "MAKEFILE" did not say "No such file MAKEFILE in
HEAD" but pretended as if "MAKEFILE" was a newly added file.
* jc/maint-blame-no-such-path:
blame: allow "blame file" in the middle of a conflicted merge
blame $path: avoid getting fooled by case insensitive filesystems
"git fetch --all", when passed "--no-tags", did not honor the
"--no-tags" option while fetching from individual remotes (the same
issue existed with "--tags", but combination "--all --tags" makes
much less sense than "--all --no-tags").
* dj/fetch-all-tags:
fetch --all: pass --tags/--no-tags through to each remote
submodule: use argv_array instead of hand-building arrays
fetch: use argv_array instead of hand-building arrays
argv-array: fix bogus cast when freeing array
argv-array: add pop function
Describe what '=' means in the output of __git_ps1 when using
GIT_PS1_SHOWUPSTREAM, which was not previously described.
Signed-off-by: Jonathan "Duke" Leto <jonathan@leto.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
File modification times in ZIP files are encoded in DOS format: local
time with a granularity of two seconds. Add an extra field to all
archive entries to also record the mtime in Unix' fashion, as UTC with
a granularity of one second.
This has the desirable side-effect of convincing Info-ZIP unzip 6.00
to respect general purpose flag 11, which is used to indicate that a
file name is encoded in UTF-8. Any extra field would do, actually,
but the extended timestamp is a reasonably small one (22 bytes per
entry). Archives created by Info-ZIP zip 3.0 contain it, too (but
with ctime and atime as well).
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" does not list a submodule with uncommitted working tree
files as modified when "submodule.$name.ignore" is set to "dirty" in
in-tree ".gitmodules" file. Both status and commit honor the setting
in $GIT_DIR/config, but "commit" does not pick it up from .gitmodules,
which is inconsistent.
Teach "git commit" to pay attention to the setting in .gitmodules as
well.
Signed-off-by: Orgad Shaneh <orgads@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear to people who (rightly or wrongly) think that the
"--follow" option should follow origin across while-file renames
that we already do so. That would explain the output that they see
when they do give the "--follow" option to the command.
We may or may not want to do a "--no-follow" patch as a follow-up,
but that is a separate topic.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Finishing touch to update documentation of string-list to make sure
the earlier rewrite of ref-list match logic that depends on its sort
order will not get broken.
* mh/fetch-filter-refs:
string_list API: document what "sorted" means
A finishing touch to make two symbols that were meant to be file-scope
static really so.
* jc/maint-log-grep-all-match-1:
grep.c: make two symbols really file-scope static this time
Usually there is no need for users to specify whether an
http remote is smart or dumb; the protocol is designed so
that a single initial request is made, and the client can
determine the server's capability from the response.
However, some misconfigured dumb-only servers may not like
the initial request by a smart client, as it contains a
query string. Until recently, commit 703e6e7 worked around
this by making a second request. However, that commit was
recently reverted due to its side effect of masking the
initial request's error code.
Since git has had that workaround for several years, we
don't know exactly how many such misconfigured servers are
out there. The reversion of 703e6e7 assumes they are rare
enough not to worry about. Still, that reversion leaves
somebody who does run into such a server with no escape
hatch at all. Let's give them an environment variable they
can tweak to perform the "dumb" request.
This is intentionally not a documented interface. It's
overly simple and is really there for debugging in case
somebody does complain about git not working with their
server. A real user-facing interface would entail a
per-remote or per-URL config variable.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output from git push currently looks like this:
$ git push dest HEAD
fatal: [some message from index-pack]
error: unpack failed: index-pack abnormal exit
To dest
! [remote rejected] HEAD -> master (n/a (unpacker error))
That n/a is meant to be "the per-ref status is not
available" but the nested parentheses just make it look
ugly. Let's turn the final line into just:
! [remote rejected] HEAD -> master (unpacker error)
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Receive-pack invokes either unpack-objects or index-pack to
handle the incoming pack. However, we do not redirect the
stderr of the sub-processes at all, so it is never seen by
the client. From the initial thread adding sideband support,
which is here:
http://thread.gmane.org/gmane.comp.version-control.git/139471
it is clear that some messages are specifically kept off the
sideband (with the assumption that they are of interest only
to an administrator, not the client). The stderr of the
subprocesses is mentioned in the thread, but it's unclear if
they are included in that group, or were simply forgotten.
However, there are a few good reasons to show them to the
client:
1. In many cases, they are directly about the incoming
packfile (e.g., fsck warnings with --strict, corruption
in the packfile, etc). Without these messages, the
client just gets "unpacker error" with no extra useful
diagnosis.
2. No matter what the cause, we are probably better off
showing the errors to the client. If the client and the
server admin are not the same entity, it is probably
much easier for the client to cut-and-paste the errors
they see than for the admin to try to dig them out of a
log and correlate them with a particular session.
3. Users of the ssh transport typically already see these
stderr messages, as the remote's stderr is copied
literally by ssh. This brings other transports (http,
and push-over-git if you are crazy enough to enable it)
more in line with ssh. As a bonus for ssh users,
because the messages are now fed through the sideband
and printed by the local git, they will have "remote:"
prepended and be properly interleaved with any local
output to stderr.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The unpack-objects command should not generally produce any
output on stdout. However, if it's given extra input after
the packfile, it will spew the remainder to stdout. When
called by receive-pack, this means we will break protocol,
since our stdout is connected to the remote send-pack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding a declaration at the beginning is not sufficient for obvious
reasons. The definition has to be made static.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running "git clone --single", the resulting repository has the
usual default "+refs/heads/*:refs/remotes/origin/*" wildcard fetch
refspec installed, which means that a subsequent "git fetch" will
end up grabbing all the other branches.
Update the fetch refspec to cover only the singly cloned ref instead
to correct this.
That means:
If "--single" is used without "--branch" or "--mirror", the
fetch refspec covers the branch on which remote's HEAD points to.
If "--single" is used with "--branch", it'll cover only the branch
specified in the "--branch" option.
If "--single" is combined with "--mirror", then it'll cover all
refs of the cloned repository.
If "--single" is used with "--branch" that specifies a tag, then
it'll cover only the ref for this tag.
Signed-off-by: Ralf Thielow <ralf.thielow@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
