Ever since the "See linkgit:git-config[1]..." paragraph was added to the
description for --untracked-files (d6293d1), the paragraphs for the
following options were indented at the same level as the "See
linkgit:git-config[1]" paragraph. This problem showed up in the
manpages, but not in the HTML documentation.
While this does fix the alignment of the options following
--untracked-files in the manpage, the "See linkgit..." portion of the
description does not retain its previous indentation level in the
manpages, or HTML documentation.
Signed-off-by: Jacob Helwig <jacob.helwig@gmail.com>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Conflicts:
Documentation/config.txt
Documentation/git-config.txt
Documentation/git-merge.txt
* jh/commit-status:
t7502: test commit.status, --status and --no-status
commit: support commit.status, --status, and --no-status
Conflicts:
Documentation/git-commit.txt
builtin-commit.c
A new configuration variable commit.status, and new command line
options --status, and --no-status control whether or not the git
status information is included in the commit message template
when using an editor to prepare the commit message. It does not
affect the effects of a user's commit.template settings.
Signed-off-by: James P. Howard, II <jh@jameshoward.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
* jk/1.7.0-status:
status/commit: do not suggest "reset HEAD <path>" while merging
commit/status: "git add <path>" is not necessarily how to resolve
commit/status: check $GIT_DIR/MERGE_HEAD only once
t7508-status: test all modes with color
t7508-status: status --porcelain ignores relative paths setting
status: reduce duplicated setup code
status: disable color for porcelain format
status -s: obey color.status
builtin-commit: refactor short-status code into wt-status.c
t7508-status.sh: Add tests for status -s
status -s: respect the status.relativePaths option
docs: note that status configuration affects only long format
commit: support alternate status formats
status: add --porcelain output format
status: refactor format option parsing
status: refactor short-mode printing to its own function
status: typo fix in usage
git status: not "commit --dry-run" anymore
git stat -s: short status output
git stat: the beginning of "status that is not a dry-run of commit"
Conflicts:
t/t4034-diff-words.sh
wt-status.c
This is like --author: allow a user to specify a given date without
using the GIT_AUTHOR_DATE environment variable.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the new "git var GIT_EDITOR" feature to decide what editor to
use, instead of duplicating its logic elsewhere. This should make
the behavior of commands in edge cases (e.g., editor names with
spaces) a little more consistent.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we use -c, -C, or --amend, we are trying one of two things: using the
source as a template or modifying a commit with corrections.
When these options are used, the authorship and timestamp recorded in the
newly created commit are always taken from the original commit. This is
inconvenient when we just want to borrow the commit log message or when
our change to the code is so significant that we should take over the
authorship (with the blame for bugs we introduce, of course).
The new --reset-author option is meant to solve this need by regenerating
the timestamp and setting the committer as the new author.
Signed-off-by: Erick Mattos <erick.mattos@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
60c2993 (Documentation/git-commit.txt: describe --dry-run, 2009-08-15)
wanted to update the documentation to say that "git status" is not the
same as "git commit --dry-run" anymore, but it screwed up and also added
the description of --dry-run that was already present.
Noticed by Johannes Gilger.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The status command recently grew "short" and "porcelain"
options for alternate output formats. Since status is no
longer "commit --dry-run", these formats are inaccessible to
people who do want to see a dry-run in a parseable form.
This patch makes those formats available to "git commit",
implying the "dry-run" option when they are used.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches --dry-run option to "git commit".
It is the same as "git status", but in the longer term we would want to
change the semantics of "git status" not to be the preview of commit, and
this is the first step for doing so.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/workflow-doc:
Documentation: add manpage about workflows
Documentation: Refer to git-rebase(1) to warn against rewriting
Documentation: new upstream rebase recovery section in git-rebase
'--signoff' uses commiter name always to add the signoff line,
make it explicit in the documentation.
Signed-off-by: Abhijit Bhopatkar <bain@devslashzero.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This points readers at the "Recovering from upstream rebase" warning
in git-rebase(1) when we talk about rewriting published history in the
'reset', 'commit --amend', and 'filter-branch' documentation.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows "git commit --author=$name" to accept a name that is not in
the required "A U Thor <author@example.xz>" format, and use that to look
up an author name that matches from existing commits.
When using this feature, it is the user's responsibility to give a name
that uniquely matches the name s/he wants, as the logic returns the name
from the first matching commit.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With git-commands moving out of $(bindir), it is useful to make a
clearer distinction between the git subcommand 'git-whatever' and
the command you type, `git whatever <options>`. So we use a dash
after "git" when referring to the former and not the latter.
I already sent a patch doing this same thing, but I missed some
spots.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The intent is to make git-commit(1) feel more like a manual page. The
change also makes the page four words shorter.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the conversion of HTML documentation to man pages
tutorial.html -> gittutorial (7)
tutorial-2.html -> gittutorial-2 (7)
cvs-migration.html -> gitcvs-migration (7)
diffcore.html -> gitdiffcore (7)
repository-layout.html -> gitrepository-layout (5)
hooks.html -> githooks (5)
glossary.html -> gitglossary (7)
core-tutorial.html -> gitcore-tutorial (7)
and the automatic update of references to these pages,
a little debris was left behind. We clear it away.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new argument teaches Git to not look for any untracked files,
saving cycles on slow file systems, or large repos.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
This lets you specify how you want untracked files to be listed.
The possible options are:
normal - Show untracked files and directories
all - Show all untracked files
The 'all' mode is used, if the mode is not specified.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also split the "-c or -C <commit>" item into two separate items.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch fixes the SYNOPSIS in git-commit.txt:
* --amend could be used in conjunction with -c/-C/-F/-m;
it is not mutually exclusive with them.
* -m and -F are not alternative options to -c/-C;
you can reuse authorship from a commit (-c/-C)
but change the message (-m/-F).
Furthermore, for long-option consistency --author <author>
is changed to --author=<author>.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.5.4:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
Its documentation was removed by 6c96753 (Documentation/git-commit: rewrite
to make it more end-user friendly, 2006-12-08), even though it is referenced
from a few places, including builtin-commit.c (as part of the commentary in
the commit message template).
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The prepare-commit-msg hook is run whenever a "fresh" commit message
is prepared, just before it is shown in the editor (if it is).
Its purpose is to modify the commit message in-place.
It takes one to three parameters. The first is the name of the file that
the commit log message. The second is the source of the commit message,
and can be: "message" (if a -m or -F option was given); "template" (if a
-t option was given or the configuration option commit.template is set);
"merge" (if the commit is a merge or a .git/MERGE_MSG file exists);
"squash" (if a .git/SQUASH_MSG file exists); or "commit", followed by
a commit SHA1 as the third parameter (if a -c, -C or --amend option
was given).
If its exit status is non-zero, git-commit will abort. The hook is
not suppressed by the --no-verify option, so it should not be used
as a replacement for the pre-commit hook.
The sample prepare-commit-msg comments out the `Conflicts:` part of
a merge's commit message; other examples are commented out, including
adding a Signed-off-by line at the bottom of the commit messsage,
that the user can then edit or discard altogether.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although we traditionally stripped away excess blank lines, trailing
whitespaces and lines that begin with "#" from the commit log message,
sometimes the message just has to be the way user wants it.
For instance, a commit message template can contain lines that begin with
"#", the message must be kept as close to its original source as possible
if you are converting from a foreign SCM, or maybe the message has a shell
script including its comments for future reference.
The cleanup modes are default, verbatim, whitespace and strip. The
default mode depends on if the message is being edited and will either
strip whitespace and comments (if editor active) or just strip the
whitespace (for where the message is given explicitely).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for the --no-verify switch should mention the
commit-msg hook, not just the pre-commit hook.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not usually make sense to record a commit that has the exact
same tree as its sole parent commit and that is why git-commit prevents
you from making such a mistake, but when data from foreign scm is
involved, it is a different story. We are equipped to represent such an
(perhaps insane, perhaps by mistake, or perhaps done on purpose) empty
change, and it is better to represent it bypassing the safety valve for
native use.
This is primarily for use by foreign scm interface scripts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
