You can feed junk to "git config --rename-section", which
will result in a config file that git will not even parse
(so you cannot fix it with git-config). We already have
syntactic sanity checks when setting a variable; let's do
the same for section names.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The submit-edit tests relied on P4EDITOR being unset. Set it
explicitly to an empty string.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default mode for push without arguments will change. Some warnings
are about to be enabled for such use, which causes some t5570 tests to
fail because they do not expect this output.
Fix this by passing an explicit refspec to git push. To that end, change
the calling conventions of test_remote_error in order to accomodate
extra command arguments.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When calling "git push" without argument, we want to allow Git to do
something simple to explain and safe. push.default=matching is unsafe
when used to push to shared repositories, and hard to explain to
beginners in some contexts. It is debatable whether 'upstream' or
'current' is the safest or the easiest to explain, so introduce a new
mode called 'simple' that is the intersection of them: push to the
upstream branch, but only if it has the same name remotely. If not, give
an error that suggests the right command to push explicitely to
'upstream' or 'current'.
A question is whether to allow pushing when no upstream is configured. An
argument in favor of allowing the push is that it makes the new mode work
in more cases. On the other hand, refusing to push when no upstream is
configured encourages the user to set the upstream, which will be
beneficial on the next pull. Lacking better argument, we chose to deny
the push, because it will be easier to change in the future if someone
shows us wrong.
Original-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test "pushing to local repo" in t5800-remote-helpers can hang
due to a race condition in git-remote-testgit. Fix it by
setting stdin to unbuffered.
On the writer side, "git push" invokes push_refs_with_export(),
which sends to stdout the command "export\n" and immediately
starts up "git fast-export". The latter writes its output stream
to the same stdout.
On the reader side, remote helper "git-remote-testgit" reads from
stdin to get its next command. It uses getc() to read characters
from libc up until \n. Libc has buffered a potentially much
larger chunk of stdin. When it sees the "export\n" command, it
forks "git fast-import" to read the stream.
If fast-export finishes before git fast-import starts, the
fast-export output can end up in libc's buffer in
git-remote-testgit, rather than in git fast-import. The latter
hangs indefinitely on a now-empty stdin.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we've added the --allow-empty and --keep-redundant-commits
options to git cherry-pick we should also add a test to ensure that its working
properly.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Felipe Contreras (4) and others
* fc/completion-tests:
completion: fix completion after 'git --option <TAB>'
completion: avoid trailing space for --exec-path
completion: add missing general options
completion: simplify by using $prev
completion: simplify __gitcomp_1
tests: add tests for the __gitcomp() completion helper function
tests: add initial bash completion tests
Error message given when @{u} is used for a branch without its
upstream configured have been clatified.
By Zbigniew Jędrzejewski-Szmek
* zj/upstream-error-message:
i18n: mark @{upstream} error messages for translation
Be more specific if upstream branch is not tracked
Provide better message for barnhc_wiht_tpyo@{u}
Provide branch name in error message when using @{u}
t1507: add tests to document @{upstream} behaviour
When "git fetch" encounters repositories with too many references, the
command line of "fetch-pack" that is run by a helper e.g. remote-curl,
may fail to hold all of them. Now such an internal invocation can feed
the references through the standard input of "fetch-pack".
By Ivan Todoroski
* it/fetch-pack-many-refs:
remote-curl: main test case for the OS command line overflow
fetch-pack: test cases for the new --stdin option
remote-curl: send the refs to fetch-pack on stdin
fetch-pack: new --stdin option to read refs from stdin
The parser in "fast-import" did not diagnose ":9" style references
that is not followed by required SP/LF as an error.
By Pete Wyckoff
* pw/fast-import-dataref-parsing:
fast-import: tighten parsing of datarefs
"git push --recurse-submodules" learns to optionally look into the
histories of submodules bound to the superproject and push them out.
By Heiko Voigt
* hv/submodule-recurse-push:
push: teach --recurse-submodules the on-demand option
Refactor submodule push check to use string list instead of integer
Teach revision walking machinery to walk multiple times sequencially
If P4EDITOR is set in the environment, test behavior could be
unpredictable. Set it explicitly.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous one is already in 'next' but was somewhat lacking.
The configuration "git-p4.validLabelRegexp" is now called
"labelExportRegexp", and its default covers lowercase alphabets as
well.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix two places that were the only place in the test suite that gave "a\+"
to platform grep and expected it to mean one or more "a", which is a
blatant GNUism.
* bw/test-fix-grep-gnuism:
t9400: fix gnuism in grep
By Jonathan Nieder
* jn/more-i18ncmp:
test: am of empty patch should not succeed
test: use test_i18ncmp for "Patch format detection failed" message
test: do not rely on US English tracking-info messages
"log -p --graph" used with "--stat" had a few formatting error.
By Lucian Poston
* lp/maint-diff-three-dash-with-graph:
t4202: add test for "log --graph --stat -p" separator lines
log --graph: fix break in graph lines
log --graph --stat: three-dash separator should come after graph lines
"git rev-parse --show-prefix" emitted nothing when run at the
top-level of the working tree, while "git rev-parse --show-cdup" gave
an empty line. Make them consistent.
By Ross Lagerwall
* rl/show-empty-prefix:
rev-parse --show-prefix: add in trailing newline
Giving "--continue" to a conflicted "rebase -i" session skipped a commit
that only results in changes to submodules.
By John Keeping
* jk/rebase-i-submodule-conflict-only:
rebase -i continue: don't skip commits that only change submodules
Since bc7a96a (mergetool--lib: Refactor tools into separate files,
2011-08-18), it is possible to add a new diff tool by creating a simple
script in the '$(git --exec-path)/mergetools' directory. Updating the
difftool help text is still a manual process, and the documentation can
easily go out of sync.
This commit teaches difftool the '--tool-help' option, which:
- Reads the list of valid tools from 'mergetools/*'
- Determines which of them are actually installed
- Determines which are capable of diffing (i.e. not just a merge tool)
- Prints the resulting list for the user
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When 'difftool' is called to compare a range of commits that modify
more than one file, it opens a separate instance of the diff tool for
each file that changed.
The new '--dir-diff' option copies all the modified files to a temporary
location and runs a directory diff on them in a single instance of the
diff tool.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The bash completion doesn't work when certain options to git itself are
specified, e.g. 'git --no-pager <TAB>' errors out with
error: invalid key: alias.--no-pager
The main _git() completion function finds out the git command name by
looping through all the words on the command line and searching for
the first word that is not a known option for the git command.
Unfortunately the list of known git options was not updated in a long
time, and newer options are not skipped but mistaken for a git command.
Such a misrecognized "command" is then passed to __git_aliased_command(),
which in turn passes it to a 'git config' query, hence the error.
Currently the following options are misrecognized for a git command:
-c --no-pager --exec-path --html-path --man-path --info-path
--no-replace-objects --work-tree= --namespace=
To fix this we could just update the list of options to be skipped,
but the same issue will likely arise, if the git command learns a new
option in the future. Therefore, to make it more future proof against
new options, this patch changes that loop to skip all option-looking
words, i.e. words starting with a dash.
We also have to handle the '-c' option specially, because it takes a
configutation parameter in a separate word, which must be skipped,
too.
[fc: added tests]
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"--exec-path" looks to the completion script like an unambiguous
successful completion, but it is wrong to emit a SP after it as if
declaring that we are done with completion; the user could be trying
to do
git --exec-path; # print name of helper directory
or
git --exec-path=/path/to/alternative/helper/dir <subcommand>
so the most helpful thing to do is to leave out the trailing space and
leave it to the operator to type an equal sign or carriage return
according to the situation.
[fc: added tests]
Cc: Andreas Schwab <schwab@linux-m68k.org>
Reported-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests check that trailing space, prefix, and suffix are added
correctly.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Break down the cases in which "git push" fails due to non-ff into
three categories, and give separate advise messages for each case.
By Christopher Tiwald (2) and Jeff King (1)
* ct/advise-push-default:
Fix httpd tests that broke when non-ff push advice changed
clean up struct ref's nonfastforward field
push: Provide situational hints for non-fast-forward errors
When PATH contains an unreadable directory, alias expansion code did not
kick in, and failed with an error that said "git-subcmd" was not found.
By Jeff King (1) and Ramsay Jones (1)
* jk/run-command-eacces:
run-command: treat inaccessible directories as ENOENT
compat/mingw.[ch]: Change return type of exec functions to int
Fix broken 'push to upstream' implementation. "git push $there" without
refspec, when the current branch is set to push to a remote different from
$there, used to push to $there using the upstream information to a remote
unreleated to $there.
* jc/push-upstream-sanity:
push: error out when the "upstream" semantics does not make sense
The "fmt-merge-msg" command learns to list the primary contributors
involved in the side topic you are merging.
* jc/fmt-merge-msg-people:
fmt-merge-msg: show those involved in a merged series
Exiting from a for-loop early using '|| break' does not propagate the
failure code, and for this reason, the tests used just 'exit'. But this
ends the test script with 'FATAL: Unexpected exit code 1' in the case of
a failed test.
Fix this by moving the loop into a shell function, from which we can
simply return early.
While at it, modernize the style of the affected test cases.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using "\+" in "grep" and expecting that it means one or more
is a GNUism. Spell it in a dumb and portable way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is used by "git pull" to construct a merge message from list of
remote refs. When pulling redundant set of refs, however, it did not
filter them even though the merge itself discards them as unnecessary.
Teach the command to do the same for consistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When COLUMNS or --stat-width restricts the diff-stat width to near the
minimum, 26 columns, the graph_width value becomes negative. Consequently, the
graph part of diff-stat is not resized properly.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of waiting until we record the parents of resulting merge, reduce
redundant parents (including our HEAD) immediately after reading them.
The change to t7602 illustrates the essence of the effect of this change.
The octopus merge strategy used to be fed with redundant commits only to
discard them as "up-to-date", but we no longer feed such redundant commits
to it and the affected test degenerates to a regular two-head merge.
And obviously the known-to-be-broken test in t6028 is now fixed.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This happens when git merge is run to merge multiple commits that are
descendants of current HEAD (or are HEAD). We've hit this while updating
master to origin/master but accidentaly we called (while being on master):
$ git merge master origin/master
Here is a minimal testcase:
$ git init a && cd a
$ echo a >a && git add a
$ git commit -minitial
$ echo b >a && git add a
$ git commit -msecond
$ git checkout master^
$ git merge master master
Fast-forwarding to: master
Already up-to-date with master
Merge made by the 'octopus' strategy.
a | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
$ git cat-file commit HEAD
tree eebfed94e75e7760540d1485c740902590a00332
parent bd679e85202280b263e20a57639a142fa14c2c64
author Michał Kiedrowicz <michal.kiedrowicz@gmail.com> 1329132996 +0100
committer Michał Kiedrowicz <michal.kiedrowicz@gmail.com> 1329132996 +0100
Merge branches 'master' and 'master' into HEAD
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
update_local_ref() used to say "[new branch]" when we stored a new ref
outside refs/tags/ hierarchy, but the message is more about what we
fetched, so use the refname at the origin to make that decision.
Also, only call a new ref a "branch" if it's under refs/heads/.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Excludes conflicted paths from "add -p" processing, as it is not prepared
to handle them.
By Jeff King
* jk/add-p-skip-conflicts:
add--interactive: ignore unmerged entries in patch mode
When "git commit --template F" errors out because the user did not touch
the message, it claimed that it aborts due to "empty message", which was
utterly wrong.
By Junio C Hamano (4) and Adam Monsen (1)
* jc/commit-unedited-template:
Documentation/git-commit: rephrase the "initial-ness" of templates
git-commit.txt: clarify -t requires editing message
commit: rephrase the error when user did not touch templated log message
commit: do not trigger bogus "has templated message edited" check
t7501: test the right kind of breakage
Makes 'snapshot' request to "gitweb" honor If-Modified-Since: header,
based on the commit date.
By W. Trevor King
* wk/gitweb-snapshot-use-if-modified-since:
gitweb: add If-Modified-Since handling to git_snapshot().
gitweb: refactor If-Modified-Since handling
gitweb: add `status` headers to git_feed() responses.
The smart-http backend used to always override GIT_COMMITTER_* variables
with REMOTE_USER and REMOTE_ADDR.
By Jeff King
* jk/http-backend-keep-committer-ident-env:
http-backend: respect existing GIT_COMMITTER_* variables
Forbids rename detection logic from matching two empty files as renames
during merge-recursive to prevent mismerges.
By Jeff King
* jk/diff-no-rename-empty:
merge-recursive: don't detect renames of empty files
teach diffcore-rename to optionally ignore empty content
make is_empty_blob_sha1 available everywhere
drop casts from users EMPTY_TREE_SHA1_BIN
"git clean -d -f" (not "-d -f -f") is supposed to protect nested working
trees of independent git repositories that exist in the current project
working tree from getting removed, but the protection applied only to such
working trees that are at the top-level of the current project by mistake.
* jc/maint-clean-nested-worktree-in-subdir:
clean: preserve nested git worktree in subdirectories
Adjust tests to verify that the commit history graph tree is taken into
consideration when the diff stat output width is calculated.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests which show that the width of the --prefix added by --graph
is not taken into consideration when the diff stat output width is
calculated.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Minor improvement to t0303.
By Zbigniew Jędrzejewski-Szmek
* zj/test-cred-helper-nicer-prove:
t0303: resurrect commit message as test documentation
t0303: immediately bail out w/o GIT_TEST_CREDENTIAL_HELPER
Running "notes merge --commit" failed to perform correctly when run
from any directory inside $GIT_DIR/. When "notes merge" stops with
conflicts, $GIT_DIR/NOTES_MERGE_WORKTREE is the place a user edits
to resolve it.
By Johan Herland (3) and Junio C Hamano (1)
* jh/notes-merge-in-git-dir-worktree:
notes-merge: Don't remove .git/NOTES_MERGE_WORKTREE; it may be the user's cwd
notes-merge: use opendir/readdir instead of using read_directory()
t3310: illustrate failure to "notes merge --commit" inside $GIT_DIR/
remove_dir_recursively(): Add flag for skipping removal of toplevel dir
The regexp configured with wordregex was incorrectly reused across files.
By Thomas Rast (2) and Johannes Sixt (1)
* tr/maint-word-diff-regex-sticky:
diff: tweak a _copy_ of diff_options with word-diff
diff: refactor the word-diff setup from builtin_diff_cmd
t4034: diff.*.wordregex should not be "sticky" in --word-diff
Some tests checked the "diff --stat" output when they do not have to,
which unnecessarily made things harder to verify under GETTEXT_POISON.
By Jonathan Nieder
* jn/diffstat-tests:
diffstat summary line varies by locale: miscellany
test: use numstat instead of diffstat in binary-diff test
test: use --numstat instead of --stat in "git stash show" tests
test: test cherry-pick functionality and output separately
test: modernize funny-names test style
test: use numstat instead of diffstat in funny-names test
test: use test_i18ncmp when checking --stat output
"git commit --author=$name" did not tell the name that was being recorded
in the resulting commit to hooks, even though it does do so when the end
user overrode the authorship via the "GIT_AUTHOR_NAME" environment
variable.
* jc/commit-hook-authorship:
commit: pass author/committer info to hooks
t7503: does pre-commit-hook learn authorship?
ident.c: add split_ident_line() to parse formatted ident line
Use API to read blob data in smaller chunks in more places to reduce the
memory footprint.
By Nguyễn Thái Ngọc Duy (6) and Junio C Hamano (1)
* nd/stream-more:
update-server-info: respect core.bigfilethreshold
fsck: use streaming API for writing lost-found blobs
show: use streaming API for showing blobs
parse_object: avoid putting whole blob in core
cat-file: use streaming API to print blobs
Add more large blob test cases
streaming: make streaming-write-entry to be more reusable
If the branch configured as upstream didn't have a local tracking
branch, git said "Upstream branch not found". We can be more helpful,
and separate the cases when upstream is not configured, and when it is
configured, but the upstream branch is not tracked in a local branch.
The following configuration leads to the second scenario:
[remote "origin"]
url = ...
fetch = refs/heads/master
[branch "master"]
remote = origin
merge = refs/heads/master
'git pull' will work on master, but master@{upstream} is not defined.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of just saying that no upstream exists for such branch,
which is true but not very helpful, check that there's no
refs/heads/barnhc_wiht_tpyo and tell it to the user.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using @{u} or @{upstream} it is common to omit the branch name,
implying current branch. If the upstream is not configured, the error
message was "No upstream branch found for ''".
When resolving '@{u}', branch_get() is called, which almost always
returns a description of a branch. This allows us to use a branch name
in the error message, even if the user said something like '@{u}'.
The only case when branch_get() returns NULL is when HEAD points to so
something which is not a branch. Of course this also means that no
upstream is configured, but it is better to directly say that HEAD
does not point to a branch.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for future changes, add tests which show error messages
with @{upstream} in various conditions:
- test branch@{u} with . as remote
- check error message for branch@{u} on a branch with
* no upstream,
* on a branch with a configured upstream which doesn't have a
remote-tracking branch
- check error message for branch@{u} when branch 'branch' does not
exist
- check error message for @{u} without the branch name
Right now the messages are very similar, but various cases can and
will be distinguished.
Note: test_i18ncmp is not used, because currently error output is not
internationalized. test_cmp will be switched to test_i18ncmp in a later
patch, when error messages are internationalized.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git am empty" test uses the construct
git am empty-file && false || :
which unconditionally returns true. Use test_must_fail instead, which
also has the benefit of noticing if "git am" has segfaulted.
While at it, tighten the test to check that the diagnostic appears on
stderr and not stdout.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.8.5~2 (am: don't infloop for an empty input file, 2012-02-25)
added a check for the human-readable message "Patch format detection
failed." but we forgot to suppress that check when running tests with
git configured to write output in another language.
Noticed by running tests with GETTEXT_POISON=YesPlease.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When v1.7.9.2~28^2 (2012-02-02) marked "Your branch is behind" and
friends for translation, it forgot to adjust tests not to check those
messages when tests are being run with git configured to write its
output in another language.
With this patch applied, t2020 and t6040 pass again with
GETTEXT_POISON=YesPlease.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Explained-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we pack everything into one big pack with "git repack
-Ad", any unreferenced objects in to-be-deleted packs are
exploded into loose objects, with the intent that they will
be examined and possibly cleaned up by the next run of "git
prune".
Since the exploded objects will receive the mtime of the
pack from which they come, if the source pack is old, those
loose objects will end up pruned immediately. In that case,
it is much more efficient to skip the exploding step
entirely for these objects.
This patch teaches pack-objects to receive the expiration
information and avoid writing these objects out. It also
teaches "git gc" to pass the value of gc.pruneexpire to
repack (which in turn learns to pass it along to
pack-objects) so that this optimization happens
automatically during "git gc" and "git gc --auto".
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing label import code looks at each commit being
imported, and then checks for labels at that commit. This
doesn't work in the real world though because it will drop
labels applied on changelists that have already been imported,
a common pattern.
This change adds a new --import-labels option. With this option,
at the end of the sync, git p4 gets sets of labels in p4 and git,
and then creates a git tag for each missing p4 label.
This means that tags created on older changelists are
still imported.
Tags that could not be imported are added to an ignore
list.
The same sets of git and p4 tags and labels can also be used to
derive a list of git tags to export to p4. This is enabled with
--export-labels in 'git p4 submit'.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If P4EDITOR is defined, the tests will fail when "git p4" starts an
editor.
Signed-off-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prefer:
test_line_count <OP> COUNT FILE
over:
test $(wc -l <FILE) <OP> COUNT
(or similar usages) in several tests.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is main test case for the original problem that triggered this
patch series. We create a repo with 50k tags and then test whether
git-clone over the smart HTTP protocol succeeds.
Note that we construct the repo in a slightly different way than the
original script used to reproduce the problem. This is because the
original script just created 50k tags all pointing to the same commit,
so if there was a bug where remote-curl.c was not passing all the refs
to fetch-pack we wouldn't know. The clone would succeed even if only one
tag was passed, because all the other tags were pointing at the same SHA
and would be considered present.
Instead we create a repo with 50k independent (dangling) commits and
then tag each of those commits with a unique tag. This way if one of the
tags is not given to fetch-pack, later stages of the clone would
complain about it.
This allows us to test both that the command line overflow was fixed, as
well as that it was fixed in a way that doesn't leave out any of the
refs.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These test cases focus only on testing the parsing of refs on stdin,
without bothering with the rest of the fetch-pack machinery. We pass in
the refs using different combinations of command line and stdin and then
we watch fetch-pack's stdout to see whether it prints all the refs we
specified (but we ignore their order).
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The syntax for the use of mark references in fast-import
demands either a SP (space) or LF (end-of-line) after
a mark reference. Fast-import does not complain when garbage
appears after a mark reference in some cases.
Factor out parsing of mark references and complain if
errant characters are found. Also be a little more careful
when parsing "inline" and SHA1s, complaining if extra
characters appear or if the form of the dataref is unrecognized.
Buggy input can cause fast-import to produce the wrong output,
silently, without error. This makes it difficult to track
down buggy generators of fast-import streams. An example is
seen in the last line of this commit command:
commit refs/heads/S2
committer Name <name@example.com> 1112912893 -0400
data <<COMMIT
commit message
COMMIT
from :1M 100644 :103 hello.c
It is missing a newline and should be:
[...]
from :1
M 100644 :103 hello.c
What fast-import does is to produce a commit with the same
contents for hello.c as in refs/heads/S2^. What the buggy
program was expecting was the contents of blob :103. While
the resulting commit graph looked correct, the contents in
some commits were wrong.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print out a trailing newline when --show-prefix is run with cwd
at the top level of the tree which results in an empty prefix.
Behavior is now like --show-cdup.
Fixes an expected failure in t1501.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP authentication is currently handled by get_refs and fetch_ref, but
not by fetch_object, fetch_pack or fetch_alternates. In the
single-threaded case, this is not an issue, since get_refs is always
called first. It recognigzes the 401 and prompts the user for
credentials, which will then be used subsequently.
If the curl multi interface is used, however, only the multi handle used
by get_refs will have credentials configured. Requests made by other
handles fail with an authentication error.
Fix this by setting CURLOPT_USERPWD whenever a slot is requested.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a repo with multiple loose objects in order to demonstrate http
authentication breakage.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-rebase--interactive stops due to a conflict and the only change
to be committed is in a submodule, the test for whether there is
anything to be committed ignores the staged submodule change. This
leads rebase to skip creating the commit for the change.
While unstaged submodule changes should be ignored to avoid needing to
update submodules during a rebase, it is safe to remove the
--ignore-submodules option to diff-index because --cached ensures that
it is only checking the index. This was discussed in [1] and a test is
included to ensure that unstaged changes are still ignored correctly.
[1] http://thread.gmane.org/gmane.comp.version-control.git/188713
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the $GITP4 variable that was used to specify the script in
contrib/fast-import/. The command is called "git p4" now, not
"git-p4".
Note that configuration variables will remain in a section called
"git-p4".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4 out of contrib/fast-import into the main code base,
aside other foreign SCM tools.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/cache-tree:
t0090: be prepared that 'wc -l' writes leading blanks
reset: update cache-tree data when appropriate
commit: write cache-tree data when writing index anyway
Refactor cache_tree_update idiom from commit
Test the current state of the cache-tree optimization
Add test-scrap-cache-tree
* cb/maint-t5541-make-server-port-portable:
t5541: check error message against the real port number used
remote-curl: Fix push status report when all branches fail
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
When execvp reports EACCES, it can be one of two things:
1. We found a file to execute, but did not have
permissions to do so.
2. We did not have permissions to look in some directory
in the $PATH.
In the former case, we want to consider this a
permissions problem and report it to the user as such (since
getting this for something like "git foo" is likely a
configuration error).
In the latter case, there is a good chance that the
inaccessible directory does not contain anything of
interest. Reporting "permission denied" is confusing to the
user (and prevents our usual "did you mean...?" lookup). It
also prevents git from trying alias lookup, since we do so
only when an external command does not exist (not when it
exists but has an error).
This patch detects EACCES from execvp, checks whether we are
in case (2), and if so converts errno to ENOENT. This
behavior matches that of "bash" (but not of simpler shells
that use execvp more directly, like "dash").
Test stolen from Junio.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can say "git push" without specifying any refspec. When using
the "upstream" semantics via the push.default configuration, the user
wants to update the "upstream" branch of the current branch, which is the
branch at a remote repository the current branch is set to integrate with,
with this command.
However, there are cases that such a "git push" that uses the "upstream"
semantics does not make sense:
- The current branch does not have branch.$name.remote configured. By
definition, "git push" that does not name where to push to will not
know where to push to. The user may explicitly say "git push $there",
but again, by definition, no branch at repository $there is set to
integrate with the current branch in this case and we wouldn't know
which remote branch to update.
- The current branch does have branch.$name.remote configured, but it
does not specify branch.$name.merge that names what branch at the
remote this branch integrates with. "git push" knows where to push in
this case (or the user may explicitly say "git push $remote" to tell us
where to push), but we do not know which remote branch to update.
- The current branch does have its remote and upstream branch configured,
but the user said "git push $there", where $there is not the remote
named by "branch.$name.remote". By definition, no branch at repository
$there is set to integrate with the current branch in this case, and
this push is not meant to update any branch at the remote repository
$there.
The first two cases were already checked correctly, but the third case was
not checked and we ended up updating the branch named branch.$name.merge
at repository $there, which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "add -p" sees an unmerged entry, it shows the combined
diff and then immediately skips the hunk. This can be
confusing in a variety of ways, depending on whether there
are other changes to stage (in which case you get the
superfluous combined diff output in between other hunks) or
not (in which case you get the combined diff and the program
exits immediately, rather than seeing "No changes").
The current behavior was not planned, and is just what the
implementation happens to do. Instead, let's explicitly
remove unmerged entries from our list of modified files, and
print a warning that we are ignoring them.
We can cheaply find which entries are unmerged by adding
"--raw" output to the "diff-files --numstat" we already run.
There is one non-obvious thing we must change when parsing
this combined output. Before this patch, when we saw a
numstat line for a file that did not have index changes, we
would create a new record with 'unchanged' in the 'INDEX'
field. Because "--raw" comes before "--numstat", we must
move this special-case down to the raw-line case (and it is
sufficient to move it rather than handle it in both places,
since any file which has a --numstat will also have a --raw
entry).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the user exited editor without editing the commit log template given
by "git commit -t <template>", the commit was aborted (correct) with an
error message that said "due to empty commit message" (incorrect).
This was because the original template support was done by piggybacking on
the check to detect an empty log message. Split the codepaths into two
independent checks to clarify the error.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "-t template" and "-F msg" options are both given (or worse yet,
there is "commit.template" configuration but a message is given in some
other way), the documentation says that template is ignored. However,
the "has the user edited the message?" check still used the contents of
the template file as the basis of the emptyness check.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests try to run "git commit" with various "forbidden" combinations
of options and expect the command to fail, but they do so without having
any change added to the index. We wouldn't be able to catch breakages
that would allow these combinations by mistake with them because the
command will fail with "nothing to commit" anyway.
Make sure we have something added to the index before running the command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The http-backend program sets default GIT_COMMITTER_NAME and
GIT_COMMITTER_EMAIL variables based on the REMOTE_USER and
REMOTE_ADDR variables provided by the webserver. However, it
unconditionally overwrites any existing GIT_COMMITTER
variables, which may have been customized by site-specific
code in the webserver (or in a script wrapping http-backend).
Let's leave those variables intact if they already exist,
assuming that any such configuration was intentional. There
is a slight chance of a regression if somebody has set
GIT_COMMITTER_* for the entire webserver, not intending it
to leak through http-backend. We could protect against this
by passing the information in alternate variables. However,
it seems unlikely that anyone will care about that
regression, and there is value in the simplicity of using
the common variable names that are used elsewhere in git.
While we're tweaking the environment-handling in
http-backend, let's switch it to use argv_array to handle
the list of variables. That makes the memory management much
simpler.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because snapshots can be large, you can save some bandwidth by
supporting caching via If-Modified-Since. This patch adds support for
the i-m-s request to git_snapshot() if the request is a commit.
Requests for snapshots of trees, which lack well defined timestamps,
are still handled as they were before.
Signed-off-by: W Trevor King <wking@drexel.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current gitweb only generates Last-Modified and handles
If-Modified-Since headers for the git_feed action. This patch breaks
the Last-Modified and If-Modified-Since handling code out from
git_feed into a new function exit_if_unmodified_since. This makes the
code easy to reuse for other actions.
Only gitweb actions which can easily calculate a modification time
should use exit_if_unmodified_since, as the goal is to balance local
processing time vs. upload bandwidth.
Signed-off-by: W Trevor King <wking@drexel.edu>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using this option git will search for all submodules that
have changed in the revisions to be send. It will then try to
push the currently checked out branch of each submodule.
This helps when a user has finished working on a change which
involves submodules and just wants to push everything in one go.
Signed-off-by: Fredrik Gustafsson <iveqy@iveqy.com>
Mentored-by: Jens Lehmann <Jens.Lehmann@web.de>
Mentored-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously it was not possible to iterate revisions twice using the
revision walking api. We add a reset_revision_walk() which clears the
used flags. This allows us to do multiple sequencial revision walks.
We add the appropriate calls to the existing submodule machinery doing
revision walks. This is done to avoid surprises if future code wants to
call these functions more than once during the processes lifetime.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
$COLUMNS must be unset to not interfere with the tests. The tests
already ignore the terminal size because output is redirected to a
file, but COLUMNS overrides terminal size detection and changes the
test output away from the standard 80.
Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Merge-recursive detects renames so that if one side modifies
"foo" and the other side moves it to "bar", the modification
is applied to "bar". However, our rename detection is based
on content analysis, it can be wrong (i.e., two files were
not intended as a rename, but just happen to have the same
or similar content).
This is quite rare if the files actually contain content,
since two unrelated files are unlikely to have exactly the
same content. However, empty files present a problem, in
that there is nothing to analyze. An uninteresting
placeholder file with zero bytes may or may not be related
to a placeholder file with another name.
The result is that adding content to an empty file may cause
confusion if the other side of a merge removed it; your
content may end up in another random placeholder file that
was added.
Let's err on the side of caution and not consider empty
files as renames. This will cause a modify/delete conflict
on the merge, which will let the user sort it out
themselves.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit teaches difftool to handle the '--no-gui' option. This option
negates the existing '--gui' option. The last setting given on the command
line wins.
This allows a user to configure "[alias] mdt = difftool --gui", but still
have the ability to override the setting without error:
$ git mdt --no-gui
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests to make sure that the three-dash separator lines appear
after the graph ancestry lines, and also the graph ancestry lines
are not broken between the diffstat and the patch.
Signed-off-by: Lucian Poston <lucian.poston@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-difftool relies on the ability to forward unknown arguments
to the git-diff command. Add a test to ensure that this works
as advertised.
Signed-off-by: David Aguilar <davvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Andrew Sayers noticed that the svn-fe | git fast-import pipeline
mishandles a subversion history that copies the root directory to a
sub-directory (e.g. doing `svn cp . trunk` to standardise your
layout). As David Barr explained, the bug arises when the following
command is sent to git fast-import:
'ls' SP ':1' SP LF
Instead of reading back what is at the root of r1, it unconditionally
reports the path as missing.
After sleeping on it, here are two patches for 'maint'. One plugs a
memory leak. The other ensures that trying to pass an empty path to
the 'ls' command results in an error message that can help the
frontend author instead of the silently broken conversion Andrew
found.
Then we can carefully add 'ls ""' support in 1.7.11.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=wrup
-----END PGP SIGNATURE-----
Merge "two fixes for fast-import's 'ls' command" from Jonathan
Andrew Sayers noticed that the svn-fe | git fast-import pipeline
mishandles a subversion history that copies the root directory to a
sub-directory (e.g. doing `svn cp . trunk` to standardise your
layout). As David Barr explained, the bug arises when the following
command is sent to git fast-import:
'ls' SP ':1' SP LF
Instead of reading back what is at the root of r1, it unconditionally
reports the path as missing.
After sleeping on it, here are two patches for 'maint'. One plugs a
memory leak. The other ensures that trying to pass an empty path to
the 'ls' command results in an error message that can help the
frontend author instead of the silently broken conversion Andrew
found.
Then we can carefully add 'ls ""' support in 1.7.11.
* commit 'refs/pull-request-tags/jn/maint-fast-import-empty-ls':
fast-import: don't allow 'ls' of path with empty components
fast-import: leakfix for 'ls' of dirty trees
remove_dir_recursively() has a check to avoid removing the directory it
was asked to remove without recursing into it and report success when the
directory is the top level of a working tree of a nested git repository,
to protect such a repository from "clean -f" (without double -f). If a
working tree of a nested git repository is in a subdirectory of a toplevel
project, however, this protection did not apply by mistake; we forgot to
pass the REMOVE_DIR_KEEP_NESTED_GIT down to the recursive removal
codepath.
This requires us to also teach the higher level not to remove the
directory it is asked to remove, when the recursed invocation did not
remove the directory it was asked to remove due to a nested git
repository, as it is not an error to leave the parent directories of such
a nested repository.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a manual notes merge is committed or aborted, we need to remove the
temporary worktree at .git/NOTES_MERGE_WORKTREE. However, removing the
entire directory is not good if the user ran the 'git notes merge
--commit/--abort' from within that directory. On Windows, the directory
removal would simply fail, while on POSIX systems, users would suddenly
find themselves in an invalid current directory.
Therefore, instead of deleting the entire directory, we delete everything
_within_ the directory, and leave the (empty) directory in place.
This would cause a subsequent notes merge to abort, complaining about a
previous - unfinished - notes merge (due to the presence of
.git/NOTES_MERGE_WORKTREE), so we also need to adjust this check to only
trigger when .git/NOTES_MERGE_WORKTREE is non-empty.
Finally, adjust the t3310 manual notes merge testcases to correctly handle
the existence of an empty .git/NOTES_MERGE_WORKTREE directory.
Inspired-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
notes_merge_commit() only needs to list all entries (non-recursively)
under a directory, which can be easily accomplished with
opendir/readdir and would be more lightweight than read_directory().
read_directory() is designed to list paths inside a working
directory. Using it outside of its scope may lead to undesired effects.
Apparently, one of the undesired effects of read_directory() is that it
doesn't deal with being given absolute paths. This creates problems for
notes_merge_commit() when git_path() returns an absolute path, which
happens when the current working directory is in a subdirectory of the
.git directory.
Originally-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Updated-by: Johan Herland <johan@herland.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git notes merge' command expected to be run from the working
tree of the project being annotated, and did not anticipate getting
run inside $GIT_DIR/.
However, because we use $GIT_DIR/NOTES_MERGE_WORKTREE as a temporary
working space for the user to work on resolving conflicts, it is not
unreasonable for a user to run "git notes merge --commit" there. But
the command fails to do so.
Found-by: David Bremner <david@tethera.net>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The commit message which added those tests (861444f 't: add test
harness for external credential helpers' 2011-12-10) provided nice
documentation in the commit message. Let's make it more visible
by putting it in the test description.
The documentation is updated to reflect the fact that
GIT_TEST_CREDENTIAL_HELPER must be set for
GIT_TEST_CREDENTIAL_HELPER_TIMEOUT to be used
and GIT_TEST_CREDENTIAL_HELPER_SETUP can be used.
Based-on-commit-message-by: Jeff King <peff@peff.net>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0300-credential-helpers.sh requires GIT_TEST_CREDENTIAL_HELPER to be
configured to do something sensible. If it is not set, prove will say:
./t0303-credential-external.sh .. skipped: (no reason given)
which isn't very nice.
Use skip_all="..." && test_done to bail out immediately and provide a
nicer message. In case GIT_TEST_CREDENTIAL_HELPER is set, but the
timeout tests are skipped, mention GIT_TEST_CREDENTIAL_HELPER_TIMEOUT.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using word diff, the code sets the word_regex from various
defaults if it was not set already. The problem is that it does this
on the original diff_options, which will also be used in subsequent
diffs.
This means that when the word_regex is not given on the command line,
only the first diff for which a setting for word_regex (either from
attributes or diff.wordRegex) ever takes effect. This value then
propagates to the rest of the diff runs and in particular prevents
further attribute lookups.
Fix the problem of changing diff state once and for all, by working
with a _copy_ of the diff_options.
Noticed-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test case applies a custom wordRegex to one file in a diff, and expects
that the default word splitting applies to the second file in the diff.
But the custom wordRegex is also incorrectly used for the second file.
Helped-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As we already walk the history of the branch that gets merged to
come up with a short log, let's label it with names of the primary
authors, so that the user who summarizes the merge can easily give
credit to them in the log message.
Also infer the names of "lieutents" to help integrators at higher
level of the food-chain to give credit to them, by counting:
* The committer of the 'tip' commit that is merged
* The committer of merge commits that are merged
Often the first one gives the owner of the history being pulled, but
his last pull from his sublieutenants may have been a fast-forward,
in which case the first one would not be. The latter rule will
count the integrator of the history, so together it might be a
reasonable heuristics.
There are two special cases:
- The "author" credit is omitted when the series is written solely
by the same author who is making the merge. The name can be seen
on the "Author" line of the "git log" output to view the log
message anyway.
- The "lieutenant" credit is omitted when there is only one key
committer in the merged branch and it is the committer who is
making the merge. Typically this applies to the case where the
developer merges his own branch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These changes are in the same spirit as the six patches that
precede them, but they haven't been split into individually
justifiable patches yet.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git's --stat output is intended for humans and since v1.7.9.2~13
(2012-02-01) varies by locale. The tests in this script using "apply
--stat" are meant to check two things:
- how binary file changes are accounted for and printed in
git's diffstat format
- that "git apply" can parse the various forms of binary diff
Split these two kinds of check into separate tests, and use --numstat
instead of --stat in the latter. This way, we lose less test coverage
when git is being run without writing its output in the C locale (for
example because GETTEXT_POISON is enabled) and there are fewer tests
to change if the --stat output needs to be tweaked again.
While at it, use commands separated by && that read and write to
temporary files in place of pipelines so segfaults and other failures
in the upstream of the processing pipeline don't get hidden.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git's diff --stat output is intended for human consumption and
since v1.7.9.2~13 (2012-02-01) varies by locale. Add a test checking
that git stash show defaults to --stat and tweak the rest of the
"stash show" tests that showed a diffstat to use numstat.
This way, there are fewer tests to tweak if the diffstat format
changes again. This also improves test coverage when running tests
with git configured not to write its output in the C locale (e.g.,
via GETTEXT_POISON=Yes).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since v1.7.3-rc0~26^2~9 (revert: report success when using option
--strategy, 2010-07-14), the cherry-pick-many-commits test checks the
format of output written to the terminal during a cherry-pick sequence
in addition to the functionality. There is no reason those have to
be checked in the same test, though, and it has some downsides:
- when progress output is broken, the test result does not convey
whether the functionality was also broken or not
- it is not immediately obvious when reading that these checks are
meant to prevent regressions in details of the output format and
are not just a roundabout way to check functional details like the
number of commits produced
- there is a temptation to include the same kind of output checking
for every new cherry-pick test, which would make future changes
to the output unnecessarily difficult
Put the tests from v1.7.3-rc0~26^2~9 in separate assertions, following
the principle "test one feature at a time".
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is one of the early tests, so it uses a style that by modern
standards can be hard to read. Tweak it to:
- clearly declare what assertion each test is designed to check
- mark tests that create state later tests will depend on with the
word "setup" so people writing or running tests know the others
can be skipped or reordered safely
- put commands that populate a file with expected output inside
the corresponding test stanza, so it is easier to see by eye
where each test begins and ends
- instead of pipelines, use commands that read and write a
temporary file, so bugs causing commands to segfault or produce
the wrong exit status can be caught.
More cosmetic changes:
- put the opening quote starting each test on the same line as the
test_expect_* invocation, and indent the commands in each test
with a single tab
- end the test early if the underlying filesystem cannot
accomodate the filenames we use, instead of marking all tests
with the same TABS_IN_FILENAMES prerequisite.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test script checks that git's plumbing commands quote filenames
with special characters like space, tab, and double-quote
appropriately in their input and output.
Since commit v1.7.9.2~13 (Use correct grammar in diffstat summary
line, 2012-02-01), the final "1 file changed, 1 insertion(+)" line
from diffstats is translatable, meaning tests that rely on exact "git
apply --stat" output have to be skipped when git is not configured to
produce output in the C locale (for example, when GETTEXT_POISON is
enabled). So:
- Tweak the three "git apply --stat" tests that check "git apply"'s
input parsing to use --numstat instead.
--numstat output is more reliable, does not vary with locale, and
is itself easier to parse. These tests are mainly about how "git
apply" parses its input so this should not result in much loss of
coverage.
- Add a new "apply --stat" test to check the quoting in --stat output
format.
This wins back a little of the test coverage lost with the patch
"test: use test_i18ncmp to check --stat output" when GETTEXT_POISON is
enabled.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since v1.7.9.2~13 (2012-02-01), git's diffstat-style summary line
produced by "git apply --stat", "git diff --stat", and "git commit"
varies by locale, producing test failures when GETTEXT_POISON is set.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was unclear what a test in t0204 wanted to check; it turns out
that it was only to observe an undefined behaviour of the system,
and did not anticipate one kind of reasonable error behaviour.
* jc/maint-undefined-i18n-observation-test:
t0204: clarify the "observe undefined behaviour" test
When "git config" diagnoses an error in a configuration file and
shows the line number for the offending line, it miscounted if the
error was at the end of line.
By Martin Stenberg
* ms/maint-config-error-at-eol-linecount:
config: report errors at the EOL with correct line number
Conflicts:
t/t1300-repo-config.sh
"git bundle" did not record boundary commits correctly when there
are many of them.
By Thomas Rast
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
"git diff-index" and its friends at the plumbing level showed the
"diff --git" header and nothing else for a path whose cached stat
info is dirty without actual difference when asked to produce a
patch. This was a longstanding bug that we could have fixed long
time ago.
By Junio C Hamano
* jc/maint-diff-patch-header:
diff -p: squelch "diff --git" header for stat-dirty paths
t4011: illustrate "diff-index -p" on stat-dirty paths
t4011: modernise style
The code to synthesize the fake ancestor tree used by 3-way merge
fallback in "git am" was not prepared to read a patch created with
a non-standard -p<num> value.
* jc/am-3-nonstandard-popt:
test: "am -3" can accept non-standard -p<num>
am -3: allow nonstandard -p<num> option
A section in a config file with a missing "]" reports the next line
as bad, same goes to a value with a missing end quote.
This happens because the error is not detected until the end of the
line, when line number is already increased. Fix this by decreasing
line number by one for these cases.
Signed-off-by: Martin Stenberg <martin@gnutiken.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When lying the author name via GIT_AUTHOR_NAME environment variable
to "git commit", the hooks run by the command saw it and could act
on the name that will be recorded in the final commit. When the user
uses the "--author" option from the command line, the command should
give the same information to the hook, and back when "git command"
was a scripted Porcelain, it did set the environment variable and
hooks can learn the author name from it.
However, when the command was reimplemented in C, the rewritten code
was not very faithful to the original, and hooks stopped getting the
authorship information given with "--author". Fix this by exporting
the necessary environment variables.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "--author" option is used to lie the authorship to "git commit"
command, hooks should learn the author name and email just like when
GIT_AUTHOR_NAME and GIT_AUTHOR_EMAIL environment variables are used
to lie the authorship. Test this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the fast-import manual explains:
The value of <path> must be in canonical form. That is it must
not:
. contain an empty directory component (e.g. foo//bar is invalid),
. end with a directory separator (e.g. foo/ is invalid),
. start with a directory separator (e.g. /foo is invalid),
Unfortunately the "ls" command accepts these invalid syntaxes and
responds by declaring that the indicated path is missing. This is too
subtle and causes importers to silently misbehave; better to error out
so the operator knows what's happening.
The C, R, and M commands already error out for such paths.
Reported-by: Andrew Sayers <andrew-git@pileofstuff.org>
Analysis-by: David Barr <davidbarr@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
This test asks for an impossible conversion to the system by
preparing an UTF-8 translation with characters that cannot be
expressed in ISO-8859-1, and then asking the message shown in
ISO-8859-1. Even though the behaviour against such a request is
undefined, it may be interesting to see what the system does, and
the purpose of this test is to see if there are platforms that
exhibit behaviour that we haven't seen.
The original recognized two known modes of behaviour:
- the key used to query the message catalog ("TEST: Old English
Runes"), saying "I cannot do that i18n".
- impossible characters replaced with ASCII "?", saying "I punt".
but they were treated totally differently. The test simply issued
an informational message "Your system punts on this one" for the
first error mode, while it diagnosed the latter as "Your system is
good; you pass!".
It turns out that Mac OS X exhibits a third mode of error behaviour,
to spew out the raw value stored in the message catalog. The test
diagnosed this behaviour as "broken", but it is merely trying to do
its best to respond to an impossible request by saying "I punt" in a
way that is slightly different from the second one.
Update the offending test to make it clear what is (and is not)
being tested, update the code structure so that newly discovered
error mode can easily be added to it later, and reword the message
that comes from a failing case to clarify that it is not the system
that is broken when it fails, but merely that the behaviour is not
something we have seen.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'log -3000 (baseline)' test accidentally still used -1000 from an
earlier version.
Noticed-by: Lawrence Holding <Lawrence.Holding@cubic.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Jens Lehmann (3) and Johannes Sixt (1)
* jl/maint-submodule-relative:
submodules: fix ambiguous absolute paths under Windows
submodules: refactor computation of relative gitdir path
submodules: always use a relative path from gitdir to work tree
submodules: always use a relative path to gitdir
The only bug right now is that $GIT_TEST_CMP is needed for test_cmp to
work.
However, we also export the three most important paths for tests:
TEST_DIRECTORY
TRASH_DIRECTORY
GIT_BUILD_DIR
Since they are available within test_expect_success, a future test
writer may expect them to also be defined in test_perf.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Loading it in the subshells still referred to $TEST_DIRECTORY/..,
which was only correct in preliminary versions of perf-lib.sh
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Junio C Hamano (2) and Ramsay Jones (1)
* jc/pickaxe-ignore-case:
ctype.c: Fix a sparse warning
pickaxe: allow -i to search in patch case-insensitively
grep: use static trans-case table
This command indirectly calls check_sha1_signature() (add_info_ref ->
deref_tag -> parse_object -> ..) , which may put whole blob in memory
if the blob's size is under core.bigfilethreshold. As config is not
read, the threshold is always 512MB. Respect user settings here.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
New test cases list commands that should work when memory is
limited. All memory allocation functions (*) learn to reject any
allocation larger than $GIT_ALLOC_LIMIT if set.
(*) Not exactly all. Some places do not use x* functions, but
malloc/calloc directly, notably diff-delta. These code path should
never be run on large blobs.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By Junio C Hamano
* jc/maint-diff-patch-header:
diff -p: squelch "diff --git" header for stat-dirty paths
t4011: illustrate "diff-index -p" on stat-dirty paths
t4011: modernise style
By Thomas Rast
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
By Zbigniew Jędrzejewski-Szmek (8) and Junio C Hamano (1)
* zj/diff-stat-dyncol:
: This breaks tests. Perhaps it is not worth using the decimal-width stuff
: for this series, at least initially.
diff --stat: add config option to limit graph width
diff --stat: enable limiting of the graph part
diff --stat: add a test for output with COLUMNS=40
diff --stat: use a maximum of 5/8 for the filename part
merge --stat: use the full terminal width
log --stat: use the full terminal width
show --stat: use the full terminal width
diff --stat: use the full terminal width
diff --stat: tests for long filenames and big change counts
OS X's sed and grep would complain with (respectively)
sed: 1: "/^-/{p;q}": extra characters at the end of q command
grep: Regular expression too big
For sed, use an explicit ; to terminate the q command.
For grep, spell the "40 hex digits" explicitly in the regex, which
should be safe as other tests already use this and we haven't got
breakage reports on OS X about them.
Signed-off-by: Thomas Rast <trast@inf.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
8c912ee (teach --histogram to diff, 2011-07-12) claimed histogram diff
was faster than both Myers and patience.
We have since incorporated a performance testing framework, so add a
test that compares the various diff tasks performed in a real 'log -p'
workload. This does indeed show that histogram diff slightly beats
Myers, while patience is much slower than the others.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current message is too long and at too low a level for anybody
to understand it if they don't know about the configuration format
already.
The text about setting up a remote is superfluous and doesn't help
understand or recover from the error that has happened. Show the
usage more prominently and explain how to set up the tracking
information. If there is only one remote, that name is used instead
of the generic <remote>.
Also simplify the message we print on detached HEAD to remove
unnecessary information which is better left for the documentation.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.9.3 for the last time
http.proxy: also mention https_proxy and all_proxy
t0300: work around bug in dash 0.5.6
t5512 (ls-remote): modernize style
tests: fix spurious error when run directly with Solaris /usr/xpg4/bin/sh
* jk/maint-avoid-streaming-filtered-contents:
do not stream large files to pack when filters are in use
teach dry-run convert_to_git not to require a src buffer
teach convert_to_git a "dry run" mode
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
In module_clone() the rel_gitdir variable was computed differently when
"git rev-parse --git-dir" returned a relative path than when it returned
an absolute path. This is not optimal, as different code paths are used
depending on the return value of that command.
Fix that by reusing the differing path components computed for setting the
core.worktree config setting, which leaves a single code path for setting
both instead of having three and makes the code much shorter.
This also fixes the bug that in the computation of how many directories
have to be traversed up to hit the root directory of the submodule the
name of the submodule was used where the path should have been used. This
lead to problems after renaming submodules into another directory level.
Even though the "(cd $somewhere && pwd)" approach breaks the flexibility
of symlinks, that is no issue here as we have to have one relative path
pointing from the work tree to the gitdir and another pointing back, which
will never work anyway when a symlink along one of those paths is changed
because the directory it points to was moved.
Also add a test moving a submodule into a deeper directory to catch any
future breakage here and to document what has to be done when a submodule
needs to be moved until git mv learns to do that. Simply moving it to the
new location doesn't work, as the core.worktree and possibly the gitfile
setting too will be wrong. So it has to be removed from filesystem and
index, then the new location has to be added into the index and the
.gitmodules file has to be updated. After that a git submodule update will
check out the submodule at the new location.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since recently a submodule with name <name> has its git directory in the
.git/modules/<name> directory of the superproject while the work tree
contains a gitfile pointing there. To make that work the git directory has
the core.worktree configuration set in its config file to point back to
the work tree.
That core.worktree is an absolute path set by the initial clone of the
submodule. A relative path is preferable here because it allows the
superproject to be moved around without invalidating that setting, so
compute and set that relative path after cloning or reactivating the
submodule.
This also fixes a bug when moving a submodule around inside the
superproject, as the current code forgot to update the setting to the new
submodule work tree location.
Enhance t7400 to ensure that future versions won't re-add absolute paths
by accident and that moving a superproject won't break submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since recently a submodule with name <name> has its git directory in the
.git/modules/<name> directory of the superproject while the work tree
contains a gitfile pointing there. When the submodule git directory needs
to be cloned because it is not found in .git/modules/<name> the clone
command will write an absolute path into the gitfile. When no clone is
necessary the git directory will be reactivated by the git-submodule.sh
script by writing a relative path into the gitfile.
This is inconsistent, as the behavior depends on the submodule having been
cloned before into the .git/modules of the superproject. A relative path
is preferable here because it allows the superproject to be moved around
without invalidating the gitfile. We do that by always writing the
relative path into the gitfile, which overwrites the absolute path the
clone command may have written there.
This is only the first step to make superprojects movable again like they
were before the separate-git-dir approach was introduced. The second step
is to use a relative path in core.worktree too.
Enhance t7400 to ensure that future versions won't re-add absolute paths
by accident.
While at it also replace an if/else construct evaluating the presence
of the 'reference' option with a single line of bash code.
Reported-by: Antony Male <antony.male@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user specifies a long option but forgets to type the second
leading dash, we currently detect and report that fact if its first
letter is a valid short option. This is done for safety, to avoid
ambiguity between short options (and their arguments) and a long
option with a missing dash.
This diagnostic message is also helpful for long options whose first
letter is not a valid short option, however. Print it in that case,
too, as a courtesy.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The construct 'while IFS== read' makes dash 0.5.6 execute
read without changing IFS, which results in test breakages
all over the place in t0300. Neither dash 0.5.5.1 and older
nor dash 0.5.7 and newer are affected: The problem was
introduded resp. fixed by the commits
55c46b7 ([BUILTIN] Honor tab as IFS whitespace when
splitting fields in readcmd, 2009-08-11)
1d806ac ([VAR] Do not poplocalvars prematurely on regular
utilities, 2010-05-27)
in http://git.kernel.org/?p=utils/dash/dash.git
Putting 'IFS==' before that line makes all versions of dash
work.
This looks like a dash bug, not a misinterpretation of the
standard. However, it's worth working around for two
reasons. One, this version of dash was released in Fedora
14-16, so the bug is found in the wild. And two, at least
one other shell, Solaris /bin/sh, choked on this by
persisting IFS after the read invocation. That is not a
shell we usually care about, and I think this use of IFS is
acceptable by POSIX (which allows other behavior near
"special builtins", but "read" is not one of those). But it
seems that this may be a subtle, not-well-tested case for
some shells. Given that the workaround is so simple, it's
worth just being defensive.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare expected output inside test_expect_success that uses it.
Also remove excess blank lines.
Signed-off-by: Tom Grennan <tmgrennan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match the style to more modern test scripts, namely:
- Prefer tabs for indentation.
- The first line of each test has prereq, title and opening sq for the
script body.
- Move cleanup or initialization of data used by a test inside the test
itself.
- Put a newline before the closing sq for each test.
- Don't conclude the test descriptions with a full stop.
- Prefer 'test_line_count = COUNT FILE' over 'test $(wc -l <FILE) = COUNT'
- Prefer 'test_line_count = 0 FILE' over 'cmp -s /dev/null FILE'
- Use '<<-EOF' style for here documents, so that they can be indented
as well. Bot don't do that in case the resulting lines would be too
long. Also when there is no $variable_substitution in the body of a
here document, quote \EOF.
- Don't redirect the output of commands to /dev/null unconditionally,
the git testing framework should already take care of handling test
verbosity transparently and uniformly.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If any test script is run directly with Solaris 10 /usr/xpg4/bin/sh or
/bin/ksh, it fails spuriously with a message like:
t0000-basic.sh[31]: unset: bad argument count
This happens because those shells bail out when encountering a call to
"unset" with no arguments, and such unset call could take place in
'test-lib.sh'. Fix that issue, and add a proper comment to ensure we
don't regress in this respect.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'name' field passed to add_pending_object() is used to later
deduplicate in object_array_remove_duplicates().
git-bundle had a bug in this area since 18449ab (git-bundle: avoid
packing objects which are in the prerequisites, 2007-03-08): it passed
the name of each boundary object in a static buffer. In other words,
all that object_array_remove_duplicates() saw was the name of the
*last* added boundary object.
The recent switch to a strbuf in bc2fed4 (bundle: use a strbuf to scan
the log for boundary commits, 2012-02-22) made this slightly worse: we
now free the buffer at the end, so it is not even guaranteed that it
still points into addressable memory by the time object_array_remove_
duplicates looks at it. On the plus side however, it was now
detectable by valgrind.
The fix is easy: pass a copy of the string to add_pending_object.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The last test descended into a subdir without ever re-emerging, which
is not so nice to the next test writer.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's not so much a conversion as a "strip everything up to and
including the first blank line", but it will come in handy again.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plumbing "diff" commands look at the working tree files without
refreshing the index themselves for performance reasons (the calling
script is expected to do that upfront just once, before calling one or
more of them). In the early days of git, they showed the "diff --git"
header before they actually ask the xdiff machinery to produce patches,
and ended up showing only these headers if the real contents are the same
and the difference they noticed was only because the stat info cached in
the index did not match that of the working tree. It was too late for the
implementation to take the header that it already emitted back.
But 3e97c7c (No diff -b/-w output for all-whitespace changes, 2009-11-19)
introduced necessary logic to keep the meta-information headers in a
strbuf and delay their output until the xdiff machinery noticed actual
changes. This was primarily in order to generate patches that ignore
whitespaces. When operating under "-w" mode, we wouldn't know if the
header is needed until we actually look at the resulting patch, so it was
a sensible thing to do, but we did not realize that the same reasoning
applies to stat-dirty paths.
Later, 296c6bb (diff: fix "git show -C -C" output when renaming a binary
file, 2010-05-26) generalized this machinery and added must_show_header
toggle. This is turned on when the header must be shown even when there
is no patch to be produced, e.g. only the mode was changed, or the path
was renamed, without changing the contents. However, when it did so, it
still kept the special case for the "-w" mode, which meant that the
plumbing would keep showing these phantom changes.
This corrects this historical inconsistency by allowing the plumbing to
omit paths that are only stat-dirty from its output in the same way as it
handles whitespace only changes under "-w" option.
The change in the behaviour can be seen in the updated test.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The plumbing that looks at the working tree, i.e. "diff-index" and
"diff-files", always emit the "diff --git a/path b/path" header lines
without anything else for paths that are only stat-dirty (i.e. different
only because the cached stat information in the index no longer matches
that of the working tree, but the real contents are the same), when
these commands are run with "-p" option to produce patches.
Illustrate this current behaviour. Also demonstrate that with the "-w"
option, we (correctly) hold off showing a "diff --git" header until actual
differences have been found. This also suppresses the header for merely
stat-dirty files, which is inconsistent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Match the style to more modern test scripts, namely:
- The first line of each test has prereq, title and opening sq for the
script body. This makes the test shorter while reducing the need for
backslashes.
- Be prepared for the case in which the previous test may have failed.
If a test wants to start from not having "frotz" that the previous test
may have created, write "rm -f frotz", not "rm frotz".
- Prepare the expected output inside your own test.
- The order of comparison to check the result is "diff expected actual",
so that the output will show how the output from the git you just broke
is different from what is expected.
- Write no SP between redirection '>' (or '<' for that matter) and the
filename.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Config option diff.statGraphWidth=<width> is equivalent to
--stat-graph-width=<width>, except that the config option is ignored
by format-patch.
For the graph-width limiting to be usable, it should happen
'automatically' once configured, hence the config option.
Nevertheless, graph width limiting only makes sense when used on a
wide terminal, so it should not influence the output of format-patch,
which adheres to the 80-column standard.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A new option --stat-graph-width=<width> can be used to limit the width
of the graph part even is more space is available. Up to <width>
columns will be used for the graph.
If commits changing a lot of lines are displayed in a wide terminal
window (200 or more columns), and the +- graph uses the full width,
the output can be hard to comfortably scan with a horizontal movement
of human eyes. Messages wrapped to about 80 columns would be
interspersed with very long +- lines. It makes sense to limit the
width of the graph part to a fixed value (e.g. 70 columns), even if
more columns are available.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for the introduction on the limit of the width of the
graph part, a new test with COLUMNS=40 is added to check that the
environment variable influences diff, show, log, but not format-patch.
A new test is added because limiting the graph part makes COLUMNS=200
stop influencing diff --stat behaviour, which isn't wide enough now.
The old test with COLUMNS=200 is retained to check for regressions.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The way that available columns are divided between the filename part
and the graph part is modified to use as many columns as necessary for
the filenames and the rest for the graph.
If there isn't enough columns to print both the filename and the
graph, at least 5/8 of available space is devoted to filenames. On a
standard 80 column terminal, or if not connected to a terminal and
using the default of 80 columns, this gives the same partition as
before.
The effect of this change is visible in the patch to the test vector
in t4052; with a small change with long filename, it stops truncating
the name part too short, and also allocates a bit more columns to the
graph for larger changes.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make merge --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make log --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make show --stat behave like diff --stat and use the full terminal
width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Default to the real terminal width for diff --stat output, instead
of the hard-coded 80 columns.
Some projects (especially in Java), have long filename paths, with
nested directories or long individual filenames. When files are
renamed, the filename part in stat output can be almost useless. If
the middle part between { and } is long (because the file was moved to
a completely different directory), then most of the path would be
truncated.
It makes sense to detect and use the full terminal width and display
full filenames if possible.
The are commands like diff, show, and log, which can adapt the output
to the terminal width. There are also commands like format-patch,
whose output should be independent of the terminal width. Since it is
safer to use the 80-column default, the real terminal width is only
used if requested by the calling code by setting diffopts.stat_width=-1.
Normally this value is 0, and can be set by the user only to a
non-negative value, so -1 is safe to use internally.
This patch only changes the diff builtin to use the full terminal width.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for updates to the "diff --stat" that updates the logic
to split the allotted columns into the name part and the graph part to
make the output more readable, add a handful of tests to document the
corner case behaviour in which long filenames and big changes are shown.
When a pathname is so long that it cannot fit on the column, the current
code truncates it to make sure that the graph part has enough room to show
a meaningful graph. If the actual change is small (e.g. only one line
changed), this results in the final output that is shorter than the width
we aim for.
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git log -S<string>" is a useful way to find the last commit in the
codebase that touched the <string>. As it was designed to be used by a
porcelain script to dig the history starting from a block of text that
appear in the starting commit, it never had to look for anything but an
exact match.
When used by an end user who wants to look for the last commit that
removed a string (e.g. name of a variable) that he vaguely remembers,
however, it is useful to support case insensitive match.
When given the "--regexp-ignore-case" (or "-i") option, which originally
was designed to affect case sensitivity of the search done in the commit
log part, e.g. "log --grep", the matches made with -S/-G pickaxe search is
done case insensitively now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The default output from "fsck" is often overwhelmed by informational
message on dangling objects, especially if you do not repack often, and a
real error can easily be buried.
Add "--no-dangling" option to omit them, and update the user manual to
demonstrate its use.
Based on a patch by Clemens Buchacher, but reverted the part to change
the default to --no-dangling, which is unsuitable for the first patch.
The usual three-step procedure to break the backward compatibility over
time needs to happen on top of this, if we were to go in that direction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using regexp search ('sr' parameter / $search_use_regexp variable
is true), check first that regexp is valid.
Without this patch we would get an error from Perl during search (if
searching is performed by gitweb), or highlighting matches substring
(if applicable), if user provided invalid regexp... which means broken
HTML, with error page (including HTTP headers) generated after gitweb
already produced some output.
Add test that illustrates such error: for example for regexp "*\.git"
we would get the following error:
Quantifier follows nothing in regex; marked by <-- HERE in m/* <-- HERE \.git/
at /var/www/cgi-bin/gitweb.cgi line 3084.
Reported-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without the magic line, prove shows lots and lots of errors:
% prove ./t9804-git-p4-label.sh
./t9804-git-p4-label.sh .. syntax error at ./t9804-git-p4-label.sh line 3, near ". ."
...
When #!/bin/sh is added, tests are skipped (I have no p4d).
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, fba4f1 (grep -P: Fix matching ^ and $) fixed an ancient bug. Add
some tests to protect the change from future breakages; a slightly broken
version of this was a part of the originally submitted patch.
Signed-off-by: Michał Kiedrowicz <michal.kiedrowicz@gmail.com>
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
print_ref_list looks up the merge_filter_ref and assumes that a valid
pointer is returned. When the object doesn't exist, it tries to
dereference a NULL pointer. This can be the case when git branch
--merged is given an argument that isn't a valid commit name.
Check whether the lookup returns a NULL pointer and die with an error
if it does. Add a test, while we're at it.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
* fc/push-prune:
push: add '--prune' option
remote: refactor code into alloc_delete_ref()
remote: reorganize check_pattern_match()
remote: use a local variable in match_push_refs()
Conflicts:
builtin/push.c
* jk/maint-avoid-streaming-filtered-contents:
do not stream large files to pack when filters are in use
teach dry-run convert_to_git not to require a src buffer
teach convert_to_git a "dry run" mode
This adds a test for the previous one to make sure that "am -3 -p0" can
read patches created with the --no-prefix option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Document accumulated fixes since 1.7.9.2
Git 1.7.8.5
grep -P: Fix matching ^ and $
am: don't infloop for an empty input file
rebase -m: only call "notes copy" when rewritten exists and is non-empty
git-p4: remove bash-ism in t9800
git-p4: remove bash-ism in t9809
git-p4: fix submit regression with clientSpec and subdir clone
git-p4: set useClientSpec variable on initial clone
Makefile: add thread-utils.h to LIB_H
Conflicts:
RelNotes
t/t9809-git-p4-client-view.sh
git-am.sh's check_patch_format function would attempt to preview
the patch to guess its format, but would go into an infinite loop
when the patch file happened to be empty. The solution: exit the
loop when "read" fails, not when the line var, "$l1" becomes empty.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This works in both bash and dash:
$ bash -c 'VAR=1 env' | grep VAR
VAR=1
$ dash -c 'VAR=1 env' | grep VAR
VAR=1
But environment variables assigned this way are not necessarily propagated
through a function in POSIX compliant shells:
$ bash -c 'f() { "$@"
}; VAR=1 f "env"' | grep VAR
VAR=1
$ dash -c 'f() { "$@"
}; VAR=1 f "env"' | grep VAR
Fix constructs like this, in particular, setting variables through
test_must_fail.
Based-on-patch-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Plain old $# works to count the number of arguments in
either bash or dash, even if the arguments have spaces.
Based-on-patch-by: Vitor Antunes <vitor.hda@gmail.com>
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
