Instead of trying to substitute fields in the p4 submit template we now simply
replace the description of the submit with the log message of the git commit.
Signed-off-by: Simon Hausmann <simon@lst.de>
This turns out to be rarely useful and is already covered by git's commit.template configuration variable.
Signed-off-by: Simon Hausmann <simon@lst.de>
Teach git-p4 about the -/ option which adds depot paths to the exclude
list, used when cloning. The option is chosen such that the natural
Perforce syntax works, eg:
git p4 clone //branch/path/... -//branch/path/{large,old}/...
Trailing ... on exclude paths are optional.
This is a generalization of a change by Dmitry Kakurin (thanks).
Signed-off-by: Tommy Thorn <tommy-git@thorn.ws>
Signed-off-by: Simon Hausmann <simon@lst.de>
Most of the time when I am on a detached HEAD and I am not doing
a rebase or bisect operation the working directory is sitting on a
tagged release of the repository. Showing the tag name instead of
the commit SHA-1 is much more descriptive and a much better reminder
of the state of this working directory.
Now that git-describe --exact-match is available as a cheap means
of obtaining the exact annotated tag or nothing at all, we can
favor the annotated tag name over the abbreviated commit SHA-1.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make it a little less posix-dependent, and more efficient.
Included is also a minor doc improvement.
Signed-off-by: David Kågedal <davidk@lysator.liu.se>
Acked-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only differences in behavior should be:
- git checkout -m with non-trivial merging won't print out
merge-recursive messages (see the change in t7201-co.sh)
- git checkout -- paths... will give a sensible error message if
HEAD is invalid as a commit.
- some intermediate states which were written to disk in the shell
version (in particular, index states) are only kept in memory in
this version, and therefore these can no longer be revealed by
later write operations becoming impossible.
- when we change branches, we discard MERGE_MSG, SQUASH_MSG, and
rr-cache/MERGE_RR, like reset always has.
I'm not 100% sure I got the merge recursive setup exactly right; the
base for a non-trivial merge in the shell code doesn't seem
theoretically justified to me, but I tried to match it anyway, and the
tests all pass this way.
Other than these items, the results should be identical to the shell
version, so far as I can tell.
[jc: squashed lock-file fix from Dscho in]
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
commit: discard index after setting up partial commit
filter-branch: handle filenames that need quoting
diff: Fix miscounting of --check output
hg-to-git: fix parent analysis
mailinfo: feed only one line to handle_filter() for QP input
diff.c: add "const" qualifier to "char *cmd" member of "struct ll_diff_driver"
Add "const" qualifier to "char *excludes_file".
Add "const" qualifier to "char *editor_program".
Add "const" qualifier to "char *pager_program".
config: add 'git_config_string' to refactor string config variables.
diff.c: remove useless check for value != NULL
fast-import: check return value from unpack_entry()
Validate nicknames of remote branches to prohibit confusing ones
diff.c: replace a 'strdup' with 'xstrdup'.
diff.c: fixup garding of config parser from value=NULL
Fix a bug in the hg-to-git convertor introduced by commit
1bc7c13af9: when searching the changeset
parents, 'hg log' returns an extra space at the end of the line, which
confuses the .split(' ') based tokenizer:
Traceback (most recent call last):
File "hg-to-git.py", line 123, in <module>
hgchildren[mparent] += ( str(cset), )
KeyError: ''
Signed-off-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the default operation to show 'when (day the commit was made),
who (who made the commit), what (what the commit log was)' in the
minibuffer instead of SHA1 and title of the commit log.
Since the user may prefer other displaying options, it is made as a
user-configurable option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Where possible, capture the output of the git command and display it
if the command fails.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Refuse to revert a file if it is modified in an existing buffer but
not saved. On success, revert the buffers that contains the files that
have been reverted.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It reverts the commit and sets up the status and edit log buffer to
allow making changes and recommitting it. Bound to C-c C-a.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of recursing into directories that only contain unknown files,
display only the directory itself. Its contents can be expanded with
git-find-file (bound to C-m).
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes the git prompt (when enabled) show if a merge or a
rebase is unfinished. It also detects if a bisect is being done as
well as detached checkouts.
An uncompleted git-am cannot be distinguised from a rebase (the
non-interactive version). Instead of having an even longer prompt
we simply ignore that and hope the power users that use git-am knows
the difference.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
The regexp "$," can't match anything. Clearly not intended.
This was introduced in ce6f33c8 which is quite a while ago.
Signed-off-by: Tommy Thorn <tommy-git@thorn.ws>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch removes the '$Keyword: ...$' '...' data, so that files
don't have spurious megre conflicts between branches.
Handles both +ko and +k styles, and leaves the '$Foo$' in
the original file.
Signed-off-by: Simon Hausmann <simon@lst.de>
This patch improves all of the popen calls in hg-to-git.py by specifying the
template 'hg log' should use instead of calling 'hg log' and grepping for the
desired data.
Signed-off-by: Mark Drago <markdrago@gmail.com>
Acked-by: Stelian Pop <stelian@popies.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Switch all git command calls to use the git (space) command format, and
remove the use of git-repo-config in place of git config.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't set the needs-refresh flag when inserting a new file info, since
ewoc refreshes it upon insert already; this makes a full refresh twice
as fast.
Also make git-fileinfo-prettyprint a little faster by not retrieving
permission values twice.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of just setting the state to up-to-date, retrieve the full
state again, so that the file type can be displayed properly.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Skip non-zero stage files during git-ls-files -c, they are handled
later. Also fix git-insert-info-list to merge duplicate file names.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Handle the T status from git-diff-index to display type changes
between file/symlink/subproject. Also always show the file type for
symlink and subprojects to indicate that they are not normal files.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows displaying correctly the executable flag for the initial
commit, and will make it possible to show the file type for up-to-date
symlinks and subprojects.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Take advantage of the new log-edit feature that allows to show a diff
with C-c C-d while editing the log message.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is a convention that commands containing a double-dash
are implementation details and not to be used by mortals. We
should automatically remove them from the completion
suggestions as such.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally written by Rémi Vanicat, I just changed the layout a little.
Signed-off-by: Rémi Vanicat <vanicat@debian.org>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Mark Drago had a subversion repository which was then converted to hg
and now is moving in to git. The first commit in the svn repo was
just the creation of the empty directory. This made its way in to the
hg repository fine, but converting from hg to git would cause an
error. The problem was that hg-to-git.py tries to commit the change,
git-commit fails, and then hg-to-git.py tries to checkout the new
revision and that fails (because it was not created). This may have
only caused an error because it was the first commit in the
repository. If an empty directory was added in the middle of the repo
somewhere things might have worked out fine.
This patch will use the new --allow-empty option to git-commit to
record such an "empty" commit, to reproduce the history recorded in hg
more faithfully.
Tested-by: Mark Drago <markdrago@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kh/commit: (33 commits)
git-commit --allow-empty
git-commit: Allow to amend a merge commit that does not change the tree
quote_path: fix collapsing of relative paths
Make git status usage say git status instead of git commit
Fix --signoff in builtin-commit differently.
git-commit: clean up die messages
Do not generate full commit log message if it is not going to be used
Remove git-status from list of scripts as it is builtin
Fix off-by-one error when truncating the diff out of the commit message.
builtin-commit.c: export GIT_INDEX_FILE for launch_editor as well.
Add a few more tests for git-commit
builtin-commit: Include the diff in the commit message when verbose.
builtin-commit: fix partial-commit support
Fix add_files_to_cache() to take pathspec, not user specified list of files
Export three helper functions from ls-files
builtin-commit: run commit-msg hook with correct message file
builtin-commit: do not color status output shown in the message template
file_exists(): dangling symlinks do exist
Replace "runstatus" with "status" in the tests
t7501-commit: Add test for git commit <file> with dirty index.
...
The remotes2config.sh script replaced all 'unsafe' characters in repo
name with '.'; include '-' in the 'safe' characters set (the set is
probably even larger).
Script required also space after "URL:", "Push:" and "Pull:" in
remotes file. This for example made the following remote
URL: git://git.kernel.org/pub/scm/git/git.git
Pull: refs/heads/master:refs/heads/origin
Pull:+refs/heads/pu:refs/heads/pu
miss 'pu' branch (forced branch) in config file after conversion.
Allow for any number of whitespace after "URL:", "Push:", "Pull:".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I use "git diff" (the porcelain) really often, and am almost as often
annoyed that the completions do not know how to complete something simple
as --cached. Now they do.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/send-pack: (24 commits)
send-pack: cluster ref status reporting
send-pack: fix "everything up-to-date" message
send-pack: tighten remote error reporting
make "find_ref_by_name" a public function
Fix warning about bitfield in struct ref
send-pack: assign remote errors to each ref
send-pack: check ref->status before updating tracking refs
send-pack: track errors for each ref
git-push: add documentation for the newly added --mirror mode
Add tests for git push'es mirror mode
Update the tracking references only if they were succesfully updated on remote
Add a test checking if send-pack updated local tracking branches correctly
git-push: plumb in --mirror mode
Teach send-pack a mirror mode
send-pack: segfault fix on forced push
Reteach builtin-ls-remote to understand remotes
send-pack: require --verbose to show update of tracking refs
receive-pack: don't mention successful updates
more terse push output
Build in ls-remote
...
This makes git commit a builtin and moves git-commit.sh to
contrib/examples. This also removes the git-runstatus
helper, which was mostly just a git-status.sh implementation detail.
Signed-off-by: Kristian Høgsberg <krh@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Except that this fixes a longstanding corner case bug by
tightening the way underlying diff-index command is run, it is
functionally equivalent to the scripted version.
Signed-off-by: Thomas Harning Jr <harningt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Importing both gtksourceview and gtksourceview2 will make python segfault
on my system (ubuntu 7.10). Change so that gtksourceview is only imported
if importing gtksourceview2 fails. This should be safe as gtksourceview
is only used if gtksourceview2 is not available.
Signed-off-by: Anton Gyllenberg <anton@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces git-clean.sh with builtin-clean.c, and moves
git-clean.sh to the examples.
This also introduces a change in behavior when removing directories
explicitly specified as a path. For example currently:
1. When dir has only untracked files, these two behave differently:
$ git clean -n dir
$ git clean -n dir/
the former says "Would not remove dir/", while the latter would say
"Would remove dir/untracked" for all paths under it, but not the
directory itself.
With -d, the former would stop refusing, however since the user
explicitly asked to remove the directory the -d is no longer required.
2. When there are more parameters:
$ git clean -n dir foo
$ git clean -n dir/ foo
both cases refuse to remove dir/ unless -d is specified. Once again
since both cases requested to remove dir the -d is no longer required.
Thanks to Johannes Schindelin for the conversion to using the
parse-options API.
Signed-off-by: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using an existing git repository to cache the perforce import we don't
fetch the branch mapping from perforce as that is a slow operation. However
the origin repository may not be fully up-to-date and therefore it may be
necessary to import more changes directly from Perforce.
Such a direct import needs self.knownBranches to be set up though, so
initialize it from the existing p4/* git branches.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/remote-builtin:
Reteach builtin-ls-remote to understand remotes
Build in ls-remote
Use built-in send-pack.
Build-in send-pack, with an API for other programs to call.
Build-in peek-remote, using transport infrastructure.
Miscellaneous const changes and utilities
Conflicts:
transport.c
Email subjects are prefixed with "[SCM] " by default, make this optionally
configurable through the hooks.emailprefix config option.
Suggested by martin f krafft through
http://bugs.debian.org/428418
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This actually replaces peek-remote with ls-remote, since peek-remote
now handles everything. peek-remote remains an a second name for
ls-remote, although its help message now gives the "ls-remote" name.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changeset takes advantage of the new parseDiffTreeEntry(...) function to
detect changes to the execute bit in the git repository. During submit, git-p4
now looks for changes to the executable bit and if it finds them it "reopens"
the file in perforce, which allows it to change the file type.
The logic for adding the executable bit in perforce is straightforward: the +x
modifier can be used. Removing the executable bit in perforce requires that the
entire filetype be redefined (there is no way to join remove the bit with a -x
modifier, for example). This changeset includes logic to remove the executable
bit from the full file type while preserving the base file type and other
modifiers.
Signed-off-by: Chris Pettitt <cpettitt@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This has been proposed for a few times without much reaction
from the list. Actually remove it to see who screams.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
The current git-p4 implementation does support file renames. However, because
it does not use the "p4 integrate" command, the history for the renamed file is
not linked to the new file.
This changeset adds support for perforce renames with the integrate command.
Currently this feature is only enabled when calling git-p4 submit with the -M
option. This is intended to look and behave similar to the "detect renames"
feature of other git commands.
The following sequence is used for renamed files:
p4 integrate -Dt x x'
p4 edit x'
rm x'
git apply
p4 delete x
By default, perforce will not allow an integration with a target file that has
been deleted. That is, if x' in the example above is the name of a previously
deleted file then perforce will fail the integrate. The -Dt option tells
perforce to allow the target of integrate to be a previously deleted file.
Signed-off-by: Chris Pettitt <cpettitt@gmail.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
* maint:
Yet more 1.5.3.5 fixes mentioned in release notes
cvsserver: Use exit 1 instead of die when req_Root fails.
git-blame shouldn't crash if run in an unmerged tree
git-config: print error message if the config file cannot be read
fixing output of non-fast-forward output of post-receive-email
post-receive-email has one place where the variable fast_forward is not
spelled correctly. At the same place the logic was reversed. The
combination of both bugs made the script work correctly for fast-forward
commits but not for non-fast-forward ones. This change fixes this to
be correct in both cases.
Signed-off-by: Robert Schiele <rschiele@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
Given that git uses 'commit', git-p4's 'sumbit' was a bit confusing at times;
often making me do 'git submit' and 'git-p4 commit' instead.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Acked-By: Simon Hausmann <simon@lst.de>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Added support for gtksourceview2 module (pygtksourceview 1.90.x) in
gitview. Also refactored code that creates the source buffer and view.
Signed-off-by: Frederick Akalin <akalin@akalin.cx>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Have the error message for missing recipients actually report the
missing config variable and not a fictional one.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Whip post 1.5.3.3 maintenance series into shape.
git stash: document apply's --index switch
post-receive-hook: Remove the From field from the generated email header so that the pusher's name is used
Using the name of the committer of the revision at the tip of the
updated ref is not sensible. That information is available in the email
itself should it be wanted, and by supplying a "From", we were
effectively hiding the person who performed the push - which is useful
information in itself.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead print a single message around sequences of commands that can
potentially take some time.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
convert-objects was needed to convert from an old-style repository,
which hashed the compressed contents and used a different date format.
Such repositories are presumably no longer common and, if such
conversions are necessary, should be done by writing a frontend for
git-fast-import.
Linus, the original author, is OK with moving it to contrib.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Do not over-quote the -f envelopesender value.
unexpected Make output (e.g. from --debug) causes build failure
Fixed minor typo in t/t9001-send-email.sh test command line.
Without this, the value passed to sendmail would have an extra set of
single quotes. At least exim's sendmail emulation would object to that:
exim: bad -f address "'list-addr@example.org'": malformed address: ' \
may not follow 'list-addr@example.org
error: hooks/post-receive exited with error code 1
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-svn: don't attempt to spawn pager if we don't want one
Supplant the "while case ... break ;; esac" idiom
User Manual: add a chapter for submodules
user-manual: don't assume refs are stored under .git/refs
Detect exec bit in more cases.
Conjugate "search" correctly in the git-prune-packed man page.
Move the paragraph specifying where the .idx and .pack files should be
Documentation/git-lost-found.txt: drop unnecessarily duplicated name.
A lot of shell scripts contained stuff starting with
while case "$#" in 0) break ;; esac
and similar. I consider breaking out of the condition instead of the
body od the loop ugly, and the implied "true" value of the
non-matching case is not really obvious to humans at first glance. It
happens not to be obvious to some BSD shells, either, but that's
because they are not POSIX-compliant. In most cases, this has been
replaced by a straight condition using "test". "case" has the
advantage of being faster than "test" on vintage shells where "test"
is not a builtin. Since none of them is likely to run the git
scripts, anyway, the added readability should be worth the change.
A few loops have had their termination condition expressed
differently.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to Johannes Schindelin for review and fixes, and Julian
Phillips for the original C translation.
This changes a few small bits of behavior:
branch.<name>.merge is parsed as if it were the lhs of a fetch
refspec, and does not have to exactly match the actual lhs of a
refspec, so long as it is a valid abbreviation for the same ref.
branch.<name>.merge is no longer ignored if the remote is configured
with a branches/* file. Neither behavior is useful, because there can
only be one ref that gets fetched, but this is more consistant.
Also, fetch prints different information to standard out.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usage info is emebed in the script, but the gist of it is to run the script
from a pre-commit hook to save permissions/ownership data to a file and check
that file into the repository. Then, a post_merge hook reads the file and
updates working tree permissions/ownership. All updates are transparent to
the user (although there is a --verbose option). Merge conflicts are handled
in the "read" phase (in pre-commit), and the script aborts the commit and
tells you how to fix things in the case of a merge conflict in the metadata
file. This same idea could be extended to handle file ACLs or other file
metadata if desired.
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is based on the git-import.sh script, but is a little
more robust and efficient. More importantly, it should
serve as a quick template for interfacing fast-import with
perl scripts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This example just puts a directory under git control. It is
significantly slower than using the git tools directly, but
hopefully shows a bit how fast-import works.
[jk: added header comments]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/cachetree:
Simplify cache API
git-format-patch --in-reply-to: accept <message@id> with angle brackets
git-add -u: do not barf on type changes
Remove duplicate note about removing commits with git-filter-branch
git-clone: improve error message if curl program is missing or not executable
git.el: Allow the add and remove commands to be applied to ignored files.
git.el: Allow selecting whether to display uptodate/unknown/ignored files.
git.el: Keep the status buffer sorted by filename.
hooks--update: Explicitly check for all zeros for a deleted ref.
The default behavior for each state can be customized, and it can also
be toggled directly from the status buffer.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes insertions and updates much more efficient.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces the script "git-reset.sh" with "builtin-reset.c".
A few git commands used in the script are called from the builtin also:
"ls-files" to check for unmerged files, "read-tree" for resetting
the index file in "mixed" and "hard" resets, and "update-index" to
refresh at the end in the "mixed" reset and also for the option that
gets selected paths into the index.
The reset option with paths was implemented by Johannes Schindelin.
Since the option that gets selected paths into the index is not
a "reset" like the others because it does not change the HEAD at all,
now the command is showing a warning when the "--mixed" option
is supplied for that purpose.
The following table shows the behaviour of "git reset" for
the different supported options, where X means "changing"
the HEAD, index or working tree:
reset: --soft --mixed --hard -- <paths>
HEAD X X X -
index - X X X
files - - X -
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://repo.or.cz/git/git-p4:
git-p4: Added support for automatically importing newly appearing perforce branches.
git-p4: Cleanup; moved the (duplicated) code for turning a branch into a git ref (for example foo -> refs/remotes/p4/<project>/foo) into a separate method.
git-p4: Cleanup; moved the code for the initial #head or revision import into a separate function, out of P4Sync.run.
git-p4: Cleanup; Turn self.revision into a function local variable (it's not used anywhere outside the function).
git-p4: Cleanup; moved the code to import a list of p4 changes using fast-import into a separate member function of P4Sync.
git-p4: Cleanup; moved the code for getting a sorted list of p4 changes for a list of given depot paths into a standalone method.
git-p4: After submission to p4 always synchronize from p4 again (into refs/remotes). Whether to rebase HEAD or not is still left as question to the end-user.
git-p4: Always call 'p4 sync ...' before submitting to Perforce.
Recently I found that doing a sequence like the following:
git-new-workdir a b
...
git-new-workdir a b
by accident will cause a (and now also b) to have an infinite cycle
in its refs directory. This is caused by git-new-workdir trying
to create the "refs" symlink over again, only during the second
time it is being created within a's refs directory and is now also
pointing back at a's refs.
This causes confusion in git as suddenly branches are named things
like "refs/refs/refs/refs/refs/refs/refs/heads/foo" instead of the
more commonly accepted "refs/heads/foo". Plenty of commands start
to see ambiguous ref names and others just take ages to compute.
git-clone has the same safety check, so git-new-workdir should
behave just like it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a change in a p4 "branch" appears that hasn't seen any previous commit and
that has a known branch mapping we now try to import it properly. First we
find the p4 change of the source branch that the new p4 branch is based on. Then
we using git rev-list --bisect to locate the corresponding git commit to that change.
Finally we import all changes in the new p4 branch up to the current change and resume
with the regular import.
Signed-off-by: Simon Hausmann <simon@lst.de>
Lately I have been doing a lot of calls to `git tag -d` and also to
`git tag -v`. In both such cases being able to complete the names
of existing tags saves the fingers some typing effort. We now look
for the -d or -v option to git-tag in the bash completion support
and offer up existing tag names as possible choices for these.
When creating a new tag we now also offer bash completion support
for the second argument to git-tag (the object to be tagged) as this
can often be a specific existing branch name and is not necessarily
the current HEAD.
If the -f option is being used to recreate an existing tag we now
also offer completion support on the existing tag names for the
first argument of git-tag, helping to the user to reselect the
prior tag name that they are trying to replace.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Both --left-right and --cherry-pick are particularly long to type, so
help the user there.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't create the p4/HEAD symbolic ref if p4/master doesn't exist yet.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After a clone with "git clone" of a repository the p4 branches are only in remotes/origin/p4/* and not in remotes/p4/*.
Separate the code for detection and creation out of the P4Sync command class into standalone methods and use them
from the P4Branches command.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-submodule command is new in 1.5.3 and contains a number
of useful subcommands for working on submodules. We usually try
to offer the subcommands of a git command in the bash completion,
so here they are for git-submodule.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm often finding that I need to run git-describe on very long
remote tracking branch names, to find out what tagged revision
the remote tracking branch is now at (or not at). Typing out
the ref names is painful, so bash completion on them is a very
useful feature.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A number of commands have learned new tricks as part of git 1.5.3.
If these are long options (--foo) we tend to support them in the
bash completion, as it makes the user's task of using the option
slightly easier.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If core.bare is set to true in the config file of a repository that
the user is trying to create a working directory from we should
abort and suggest to the user that they remove the option first.
If we leave the core.bare=true setting in the config file then
working tree operations will get confused when they attempt to
execute in the new workdir, as it shares its config file with the
bare repository. The working tree operations will assume that the
workdir is bare and abort, which is not what the user wants.
If we changed core.bare to be false then working tree operations
will function in the workdir but other operations may fail in the
bare repository, as it claims to not be bare.
If we remove core.bare from the config then Git can fallback on
the legacy guessing behavior. This allows operations in the bare
repository to work as though it were bare, while operations in the
workdirs to act as though they are not bare.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
My day-job workflow involves using multiple workdirs attached to a
bunch of bare repositories. Such repositories are stored inside of
a directory called "foo.git", which means `git rev-parse --git-dir`
will return "." and not ".git". Under such conditions new-workdir
was getting confused about where the Git repository it was supplied
is actually located.
If we get "." for the result of --git-dir query it means we should
use the user supplied path as-is, and not attempt to perform any
magic on it, as the path is directly to the repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When performing a git-p4 clone operation on a Perforce repository,
where the changelists change in order of magnitude (e.g. 100 to 1000),
the set of changes to import from is not sorted properly. This is
because the data in the list is strings not integers. The other place
where this is done already converts the value to an integer, so it is
not affected.
Acked-by: Simon Hausmann <simon@lst.de>
This allows jumping to the correct file with the diff-mode commands.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
We have to load a tree difference for the purpose of testing
file patterns. But if our branch is being created and there is no
specific base to difference against in the rule our base will be
'0'x40. This is (usually) not a valid tree-ish object in a Git
repository, so there's nothing to difference against.
Instead of creating the empty tree and running git-diff against
that we just take the output of `ls-tree -r --name-only` and mark
every returned pathname as an add.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some applications of the update hook a user may be allowed to
modify a branch, but only if the file level difference is also an
allowed change. This is the commonly requested feature of allowing
users to modify only certain files.
A new repository.*.allow syntax permits granting the three basic
file level operations:
A: file is added relative to the other tree
M: file exists in both trees, but its SHA-1 or mode differs
D: file is removed relative to the other tree
on a per-branch and path-name basis. The user must also have a
branch level allow line already granting them access to create,
rewind or update (CRU) that branch before the hook will consult
any file level rules.
In order for a branch change to succeed _all_ files that differ
relative to some base (by default the old value of this branch,
but it can also be any valid tree-ish) must be allowed by file
level allow rules. A push is rejected if any diff exists that
is not covered by at least one allow rule.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some applications of this paranoid update hook the set of ACL
rules that need to be applied to a user can be large, and the
number of users that those rules must also be applied to can be
more than a handful of individuals. Rather than repeating the same
rules multiple times (once for each user) we now allow users to be
members of groups, where the group supplies the list of ACL rules.
For various reasons we don't depend on the underlying OS groups
and instead perform our own group handling.
Users can be made a member of one or more groups by setting the
user.memberOf property within the "users/$who.acl" file:
[user]
memberOf = developer
memberOf = administrator
This will cause the hook to also parse the "groups/$groupname.acl"
file for each value of user.memberOf, and merge any allow rules
that match the current repository with the user's own private rules
(if they had any).
Since some rules are basically the same but may have a component
differ based on the individual user, any user.* key may be inserted
into a rule using the "${user.foo}" syntax. The allow rule does
not match if the user does not define one (and exactly one) value
for the key "foo".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Parse the files section in the "p4 change -o" output and remove lines with file changes in unrelated depot paths.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Detect symlinks as file type, set the git file mode accordingly and strip off the trailing newline in the p4 print output.
Make the mode handling a bit more readable at the same time.
Signed-off-by: Simon Hausmann <simon@lst.de>
Acked-by: Brian Swetland <swetland@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a new addition to 1.5.3; let's teach it to the
completion before the final release.
[sp: Added missing git-stash completion configuration]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
processing
P4 change outputs the changes sorted for each directory separately. We
want the global ordering on the changes, hence we sort.
Signed-off-by: Han-Wen Nienhuys <hanwen@google.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
Also don't require .git/info/exclude to exist in order to list unknown
files.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Acked-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces "git-verify-tag.sh" with "builtin-verify-tag.c".
Testing relies on the "git tag -v" tests calling this command.
A temporary file is needed when calling to gpg, because git is
already creating detached signatures (gpg option -b) to sign tags
(instead of leaving gpg to add the signature to the file by itself),
and those signatures need to be supplied in a separate file to be
verified by gpg.
The program uses git_mkstemp to create that temporary file needed by
gpg, instead of the previously used "$GIT_DIR/.tmp-vtag", in order to
allow the command to be used in read-only repositories, and also
prevent other instances of git to read or remove the same file.
Signal SIGPIPE is ignored because the program sometimes was
terminated because that signal when writing the input for gpg.
The command now can receive many tag names to be verified.
Documentation is also updated here to reflect this new behaviour.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fall back to USERPROFILE if HOME isn't set.
Signed-off-by: Simon Hausmann <shausman@trolltech.com>
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without argument the mode is toggled, which would do the wrong thing
if the file was already open.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we know which files have been modified, we can now run diff-index
or ls-files with a file list to refresh only the specified files
instead of the whole project.
This also allows proper refreshing of files upon add/delete/resolve,
instead of making assumptions about the new file state.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This replaces the script "git-tag.sh" with "builtin-tag.c".
The existing test suite for "git tag" guarantees the compatibility
with the features provided by the script version.
There are some minor changes in the behaviour of "git tag" here:
"git tag -v" now can get more than one tag to verify, like "git tag -d" does,
"git tag" with no arguments prints all tags, more like "git branch" does,
and "git tag -n" also prints all tags with annotations (without needing -l).
Tests and documentation were also updated to reflect these changes.
The program is currently calling the script "git verify-tag" for verify.
This can be changed porting it to C and calling its functions directly
from builtin-tag.c.
Signed-off-by: Carlos Rica <jasampler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://people.freedesktop.org/~hausmann/git-p4:
git-p4: Cleanup, used common function for listing imported p4 branches
git-p4: Fix upstream branch detection for submit/rebase with multiple branches.
git-p4: Cleanup, make listExistingP4Branches a global function for later use.
git-p4: input to "p4 files" by stdin instead of arguments
git-p4: use subprocess in p4CmdList
Don't use git name-rev to locate the upstream git-p4 branch for rebase and submit but instead locate the branch by comparing the depot paths.
name-rev may produce results like wrongbranch~12 as it uses the first match.
Signed-off-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
This approach, suggested by Alex Riesen, bypasses the need for xargs-style
argument list handling. The handling in question looks broken in a corner
case with SC_ARG_MAX=4096 and final argument over 96 characters.
Signed-off-by: Scott Lamb <slamb@slamb.org>
Signed-off-by: Simon Hausmann <simon@lst.de>
This allows bidirectional piping - useful for "-x -" to avoid commandline
arguments - and is a step toward bypassing the shell.
Signed-off-by: Scott Lamb <slamb@slamb.org>
Signed-off-by: Simon Hausmann <simon@lst.de>
Move git-p4import.py and Documentation/git-p4import.txt into
a contrib/p4import directory. Add a README there directing
people to contrib/fast-import/git-p4 as a better alternative.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://repo.or.cz/git/fastimport:
Teach fast-import to recursively copy files/directories
Fix git-p4 on Windows to not use the Posix sysconf function.
Correct trivial typo in fast-import documentation
Add condition for Windows, since it doesn't support the os.sysconf module.
We hardcode the commandline limit to 2K, as that should work on most
Windows platforms.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Acked-by: Simon Hausmann <simon@lst.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This script reads the existing commit log and .mailmap file,
and outputs author e-mail addresses that would map to more
than one names (most likely due to difference in the way they
are spelled, but some are due to ancient botched commits).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is necessary to make several editing functions work, like
C-u C-x v =
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This script was originally posted on the git mailing list by
Randal L. Schwartz <merlyn@stonehenge.com>.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This tool will print vaguely pretty information about a pack. It
expects the output of "git-verify-pack -v" as input on stdin.
$ git-verify-pack -v | packinfo.pl
See the documentation in the script (contrib/stats/packinfo.pl)
for more information.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
