Factor out the common parts of the handling of the sub commands
'--continue', '--skip' and '--abort'. The '--abort' handling can
handled completely in git-rebase.sh.
After this refactoring, the calls to git-rebase--am.sh,
git-rebase--merge.sh and git-rebase--interactive.sh will be better
aligned. There will only be one call to interactive rebase that will
shortcut the very last part of git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make it possible to later remove the handling of --abort from
git-rebase--interactive.sh, align the implementation in git-rebase.sh
with the former by making it a bit more verbose.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rename variables HEAD and OLDHEAD to orig_head and HEADNAME to
head_name, which are the names used in git-rebase.sh. This prepares
for factoring out of the code that persists these variables during the
entire rebase process. Using the same variable names to mean the same
thing in both files also makes the code easier to read.
While at it, also remove the DOTEST variable and use the state_dir
variable that was inherited from git-rebase.sh instead.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rebase stops due to conflict, interactive rebase currently
displays a different hint to the user than non-interactive rebase
does. Use the same message for both types of rebase.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the call to the pre-rebase hook from
git-rebase--interactive.sh and rely on the call in
git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the check for clean work tree from git-rebase--interactive.sh and
rely on the check in git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the parsing and validation of references (onto, upstream, branch)
from git-rebase--interactive.sh and rely on the information exported from
git-rebase.sh.
By using the parsing of the --onto parameter in git-rebase.sh, this
improves the error message when the parameter is invalid.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reorder validation steps in preparation for the validation to be factored
out from git-rebase--interactive.sh into git-rebase.sh.
The main functional difference is that the pre-rebase hook will no longer
be run if the work tree is dirty.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove directory checks from git-rebase--interactive.sh that are done in
git-rebase.sh.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the command line processing in git-rebase--interactive.sh
to git-rebase.sh. Store the options in variables in git-rebase.sh and
then source git-rebase--interactive.sh.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make sure to interpret variables with the same name in the same way in
git-rebase.sh and git-rebase--interactive.sh. This will make it easier
to factor out code from git-rebase.sh to git-rebase--interactive and
export the variables.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-rebase--interactive.sh will soon be sourced from
git-rebase.sh. Align the names of variables used in these scripts to
prepare for that.
Some names in git-rebase--interactive.sh, such as "author_script" and
"amend", are currently used in their upper case form to refer to a
file and in their lower case form to refer to something else. In these
cases, change the name of the existing lower case variable and
downcase the name of the variable that refers to the file.
Currently, git-rebase.sh uses mostly lower case variable names, while
git-rebase--interactive.sh uses mostly upper case variable names. For
consistency, downcase all variables, not just the ones that will be
shared between the two script files.
Helped-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To later be able to use the command line processing in git-rebase.sh
for both interactive and non-interactive rebases, move anything that
is specific to non-interactive rebase outside of the parsing
loop. Keep only parsing and validation of command line options in the
loop.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: clarify in-editor documentation of "exec"
tests: sanitize more git environment variables
fast-import: treat filemodify with empty tree as delete
rebase: give a better error message for bogus branch
rebase: use explicit "--" with checkout
Conflicts:
t/t9300-fast-import.sh
The hints in the current "instruction sheet" template look like so:
# Rebase 3f14246..a1d7e01 onto 3f14246
#
# Commands:
# p, pick = use commit
# r, reword = use commit, but edit the commit message
# e, edit = use commit, but stop for amending
# s, squash = use commit, but meld into previous commit
# f, fixup = like "squash", but discard this commit's log message
# x <cmd>, exec <cmd> = Run a shell command <cmd>, and stop if it fails
#
# If you remove a line here THAT COMMIT WILL BE LOST.
# However, if you remove everything, the rebase will be aborted.
#
This does not make it clear that the format of each line is
<insn> <commit id> <explanatory text that will be printed>
but the reader will probably infer that from the automatically
generated pick examples above it.
What about the "exec" instruction? By analogy, I might imagine that
the format of that line is "exec <command> <explanatory text>", and
the "x <cmd>" hint does not address that question (at first I read it
as taking an argument <cmd> that is the name of a shell). Meanwhile,
the mention of <cmd> makes the hints harder to scan as a table.
So remove the <cmd> and add some words to remind the reader that
"exec" runs a command named by the rest of the line. To make room, it
is left to the manpage to explain that that command is run using
$SHELL and that nonzero status from that command will pause the
rebase.
Wording from Junio.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a ref/pathname conflict, checkout will
already do the right thing and checkout the ref. However,
for a non-existant ref, this has two advantages:
1. If a file with that pathname exists, rebase will
refresh the file from the index and then rebase the
current branch instead of producing an error.
2. If no such file exists, the error message using an
explicit "--" is better:
# before
$ git rebase -i origin bogus
error: pathspec 'bogus' did not match any file(s) known to git.
Could not checkout bogus
# after
$ git rebase -i origin bogus
fatal: invalid reference: bogus
Could not checkout bogus
The problems seem to be trigger-able only through "git
rebase -i", as regular git-rebase checks the validity of the
branch parameter as a ref very early on. However, it doesn't
hurt to be defensive.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Interactive rebase allows the '--verify' option to be passed, but it will
be ignored. Implement proper support for the option for both interactive
and non-interactive rebase by making it override any previous
'--no-verify'.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support lines of the form "fixup! 7a235b" that specify an exact commit
in addition to the normal "squash! Old commit message" form.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current behvaior of --autosquash can duplicate fixup!/squash! lines
if they match multiple commits, and it can also apply them to commits
that come after them in the todo list. Even more oddly, a commit that
looks like "fixup! fixup!" will match itself and be duplicated in the
todo list.
Change the todo list rearranging to mark all commits as used as soon
as they are emitted, and to avoid emitting a fixup/squash commit if the
commit has already been marked as used.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although Git interally has the facility to differentiate between
porcelain and plubmbing commands and appropriately print errors,
several shell scripts invoke plubming commands triggering cryptic
plumbing errors to be displayed on a porcelain interface. This patch
replaces the "needs update" message in git-pull and git-rebase, when
`git update-index` is run, with a more friendly message.
Reported-by: Joshua Jensen <jjensen@workspacewhiz.com>
Reported-by: Thore Husfeldt <thore.husfeldt@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some versions of cut do not cope well with lines that do not end in
an LF. In this case, we can completely avoid cut by using the
${var%% *} parameter expansion (suggested by Brandon Casey).
I found this problem when t3404's "avoid unnecessary reset" failed
due to the "rebase -i" not avoiding updating the tested timestamp.
On a Mac OS X 10.4.11 system:
% printf '%s' 'foo bar' | /usr/bin/cut -d ' ' -f 1
cut: stdin: Illegal byte sequence
Signed-off-by: Chris Johnsen <chris_johnsen@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/cherry-revert-message-clean-up:
tests: fix syntax error in "Use advise() for hints" test
cherry-pick/revert: Use advise() for hints
cherry-pick/revert: Use error() for failure message
Introduce advise() to print hints
Eliminate “Finished cherry-pick/revert” message
t3508: add check_head_differs_from() helper function and use it
revert: improve success message by adding abbreviated commit sha1
revert: don't print "Finished one cherry-pick." if commit failed
revert: refactor commit code into a new run_git_commit() function
revert: report success when using option --strategy
* mm/rebase-i-exec:
git-rebase--interactive.sh: use printf instead of echo to print commit message
git-rebase--interactive.sh: rework skip_unnecessary_picks
test-lib: user-friendly alternatives to test [-d|-f|-e]
rebase -i: add exec command to launch a shell command
Conflicts:
git-rebase--interactive.sh
t/t3404-rebase-interactive.sh
When cherry-pick fails after picking a large series of commits, it can
be hard to pick out the error message and advice. Prefix the advice
with “hint: ” to help.
Before:
error: could not apply 7ab78c9... foo
After resolving the conflicts,
mark the corrected paths with 'git add <paths>' or 'git rm <paths>'
and commit the result with:
git commit -c 7ab78c9a7898b87127365478431289cb98f8d98f
After:
error: could not apply 7ab78c9... foo
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit -c 7ab78c9'
Noticed-by: Thomas Rast <trast@student.ethz.ch>
Encouraged-by: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace the echo statements that operate on $rest with printf's to restore
what was lost from 938791cd. This avoids any mangling that XSI-conformant
echo's may introduce.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit cd035b1c introduced the exec command to interactive rebase. In
doing so, it modified the way that skip_unnecessary_picks iterates through
the list of rebase commands so that it avoided collapsing multiple spaces
into a single space. This is necessary for example if the argument to the
exec command contains a path with multiple spaces in it.
The way it did this was by reading each line of rebase commands into a
single variable, and then breaking the individual components out using
echo, sed, and cut. It used the individual broken-out components for
decision making, and was still able to write the original line to the
output file from the variable it had saved it in. But, since we only
really need to look at anything other than the first element of the line
when a 'pick' command is encountered, and even that is only necessary when
we are still searching for "unnecessary" picks, and since newer rebase
commands like 'exec' may not even require a sha1 field, let's make our read
statement parse its input into a "command" variable, and a "rest" variable,
and then only break out the sha1 from $rest, and call git-rev-parse, when
absolutely necessary.
I think this future proofs this subroutine, avoids calling git-rev-parse
unnecessarily, and possibly with bogus arguments, and still accomplishes
the goal of not mangling the $rest of the rebase command.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The typical usage pattern would be to run a test (or simply a compilation
command) at given points in history.
The shell command is ran (from the worktree root), and the rebase is
stopped when the command fails, to give the user an opportunity to fix
the problem before continuing with "git rebase --continue".
This needs a little rework of skip_unnecessary_picks, which wasn't robust
enough to deal with lines like
exec >"file name with many spaces"
in the todolist. The new version extracts command, sha1 and rest from
each line, but outputs the line itself verbatim to avoid changing the
whitespace layout.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On systems with an echo which defaults to the XSI-conformant behavior
(Solaris, or others using Ksh), echo will interpret certain backslashed
characters as control sequences. This can cause a problem for interactive
rebase when it is used to rebase commits whose commit "subject" (the first
line) contains any of these backslashed sequences. In this case, echo will
substitute the control sequence for the backslashed characters and either
the rebased commit message will differ from the original, or the rebase
process will fail. Neither is desirable.
So work around this issue by replacing the echo statements used to print
out portions of the commit message, with printf.
Also, add a test to test for this breakage.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you use this feature regularly you can now enable it by default. In
case the user wants to override this config on the commandline
--no-autosquash can be used to force disabling.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Case arms should align with "case" and "esac".
Do not cat a file into a pipeline; just make the downstream command
read from the file.
Having a while statement as a downstream of a pipe is fine, but
the loop should begin on its own line.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Untracked content in the working tree may prevent rebase -i from checking out
the new base onto which it wants to replay commits, if the new base commit
includes files at those (now untracked) paths. Currently, rebase -i dies
uncleanly in this situation, updating ORIG_HEAD and leaving a useless
.git/rebase-merge directory, with which the user can do nothing useful except
rebase --abort. Make rebase -i abort the procedure itself instead, as
non-interactive rebase already does, and add a test for this behavior.
Signed-off-by: Ian Ward Comfort <icomfort@stanford.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you do a "rebase -i" and don't change any commits,
nothing is rewritten, and we have no REWRITTEN_LIST. The
shell prints out an ugly message:
$ GIT_EDITOR=true git rebase -i HEAD^
/path/to/git-rebase--interactive: 1: cannot open
/path/to/repo/.git/rebase-merge/rewritten-list: No such file
Successfully rebased and updated refs/heads/master.
We can fix it by not running "notes copy" at all if nothing
was rewritten.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cc/cherry-pick-ff:
revert: fix tiny memory leak in cherry-pick --ff
rebase -i: use new --ff cherry-pick option
Documentation: describe new cherry-pick --ff option
cherry-pick: add tests for new --ff option
revert: add --ff option to allow fast forward when cherry-picking
builtin/merge: make checkout_fast_forward() non static
parse-options: add parse_options_concat() to concat options
The post-rewrite support, in the form of the call to
'record_in_rewritten', was hidden in the arm where we have to record a
new commit for the user. This meant that it was never invoked in the
case where the user has already amended the commit by herself.
[The test is designed to exercise both arms of the 'if' in question.]
Furthermore, recording the stopped-sha (the SHA1 of the commit before
the editing) suffered from a cut&paste error from die_with_patch and
used the wrong variable, hence it never recorded anything.
Noticed by Junio.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/notes-display:
git-notes(1): add a section about the meaning of history
notes: track whether notes_trees were changed at all
notes: add shorthand --ref to override GIT_NOTES_REF
commit --amend: copy notes to the new commit
rebase: support automatic notes copying
notes: implement helpers needed for note copying during rewrite
notes: implement 'git notes copy --stdin'
rebase -i: invoke post-rewrite hook
rebase: invoke post-rewrite hook
commit --amend: invoke post-rewrite hook
Documentation: document post-rewrite hook
Support showing notes from more than one notes tree
test-lib: unset GIT_NOTES_REF to stop it from influencing tests
Conflicts:
git-am.sh
refs.c
For git-rebase.sh, --no-ff is a synonym for --force-rebase.
For git-rebase--interactive.sh, --no-ff cherry-picks all the commits in
the rebased branch, instead of fast-forwarding over any unchanged commits.
--no-ff offers an alternative way to deal with reverted merges. Instead of
"reverting the revert" you can use "rebase --no-ff" to recreate the branch
with entirely new commits (they're new because at the very least the
committer time is different). This obviates the need to revert the
reversion, as you can re-merge the new topic branch directly. Added an
addendum to revert-a-faulty-merge.txt describing the situation and how to
use --no-ff to handle it.
Signed-off-by: Marc Branchaud <marcnarc@xiplink.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git rebase allows you to specify a non-branch commit-ish as the "branch"
argument, which leaves HEAD detached when it's finished. This is
occasionally useful, and this patch brings the same functionality to git
rebase --interactive.
Signed-off-by: Dave Olszewski <cxreg@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Luckily, all the support already happens to be there.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aside from the same issue that rebase also has (remembering the
original commit across a conflict resolution), rebase -i brings an
extra twist: We need to defer writing the rewritten list in the case
of {squash,fixup} because their rewritten result should be the last
commit in the squashed group.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rough structure of run_rewrite_hook() comes from
run_receive_hook() in receive-pack.
We introduce a --no-post-rewrite option and use it to avoid the hook
when called from git-rebase -i 'edit'. The next patch will add full
support in git-rebase, and we only want to invoke the hook once.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bash (4.0.24) on OpenBSD 4.6 refuses to run this snippet:
$ cat gomi.sh
#!/bin/sh
one="/var/tmp/1 1"
rm -f /var/tmp/1 "/var/tmp/1 1"
echo hello >$one
$ sh gomi.sh; ls /var/tmp/1*
/var/tmp/1 1
$ bash gomi.sh; ls /var/tmp/1*
gomi.sh: line 4: $one: ambiguous redirect
ls: /var/tmp/1*: No such file or directory
Every competent shell programmer knows that a <$word in redirection is not
subject to field splitting (POSIX.1 "2.7 Redirection" explicitly lists the
kind of expansion performed: "... the word that follows the redirection
operator shall be subjected to ...", and "Field Splitting" is not among
them).
Some clueless folks apparently decided that users need to be protected in
the name of "security", however.
Output from "git grep -e '> *\$' -- '*.sh'" indicates that rebase-i
suffers from this bogus "safety". Work it around by surrounding the
variable reference with a dq pair.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a dollar sign in double quotes isn't portable. Escape them with
a backslash or replace the double quotes with single quotes.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no point doing self-assignments of these variables. Instead,
just export them to the environment, but do so in a sub-shell, because
VAR1=VAL1 VAR2=VAL2 ... command arg1 arg2...
does not mark the variables exported if command that is run
is a shell function, according to POSIX.1.
The callers of do_with_author do not rely on seeing the effect of any
shell variable assignments that may happen inside what was called through
this shell function (currently "output" is the only one), so running it in
the subshell doesn't have an adverse semantic effect.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/rebase-fixup:
rebase -i: Retain user-edited commit messages after squash/fixup conflicts
t3404: Set up more of the test repo in the "setup" step
rebase -i: For fixup commands without squashes, do not start editor
rebase -i: Change function make_squash_message into update_squash_message
rebase -i: Extract function do_with_author
rebase -i: Handle the author script all in one place in do_next
rebase -i: Extract a function "commit_message"
rebase -i: Simplify commit counting for generated commit messages
rebase -i: Improve consistency of commit count in generated commit messages
t3404: Test the commit count in commit messages generated by "rebase -i"
rebase -i: Introduce a constant AMEND
rebase -i: Introduce a constant AUTHOR_SCRIPT
rebase -i: Document how temporary files are used
rebase -i: Use symbolic constant $MSG consistently
rebase -i: Use "test -n" instead of "test ! -z"
rebase -i: Inline expression
rebase -i: Remove dead code
rebase -i: Make the condition for an "if" more transparent
* 'mh/rebase-fixup' (early part):
rebase-i: Ignore comments and blank lines in peek_next_command
lib-rebase: Allow comments and blank lines to be added to the rebase script
lib-rebase: Provide clearer debugging info about what the editor did
Add a command "fixup" to rebase --interactive
t3404: Use test_commit to set up test repository
When a squash/fixup fails due to a conflict, the user is required to
edit the commit message. Previously, if further squash/fixup commands
followed the conflicting squash/fixup, this user-edited message was
discarded and a new automatically-generated commit message was
suggested.
Change the handling of conflicts within squash/fixup command series:
Whenever the user is required to intervene, consider the resulting
commit to be a new basis for the following squash/fixups and use its
commit message in later suggested combined commit messages.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the "rebase -i" commands include a series of fixup commands without
any squash commands, then commit the combined commit using the commit
message of the corresponding "pick" without starting up the
commit-message editor.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Alter the file $SQUASH_MSG in place rather than outputting the new
message then juggling it around. Change the function name
accordingly.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Call it instead of repeating similar code blocks in several places.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change has no practical effect but makes the code easier to
follow.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
...instead of repeating the same short but slightly obscure blob of
code in several places.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read the old count from the first line of the old commit message
rather than counting the number of commit message blocks in the file.
This is simpler, faster, and more robust (e.g., it cannot be confused
by strange commit message contents).
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the numeral "2" instead of the word "two" when two commits are
being interactively squashed. This makes the treatment consistent
with that for higher numbers of commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a constant AMEND holding the filename of the $DOTEST/amend file,
and document how this temporary file is used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a constant AUTHOR_SCRIPT, holding the filename of the
$DOTEST/author_script file, and document how this temporary file is
used.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add documentation, inferred by reverse-engineering, about how
git-rebase--interactive.sh uses many of its temporary files.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The filename constant $MSG was previously used in some places and
written out literally in others.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Inline expression when generating output rather than overwriting the
"sha1" local variable with a short SHA1.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This branch of the "if" is only executed if $no_ff is empty, which
only happens if $1 was not '-n'. (This code has been dead since
1d25c8cf82eead72e11287d574ef72d3ebec0db1.)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test $no_ff separately rather than testing it indirectly by gluing it
onto a comparison of two SHA1s.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-merge-base:
rebase -i: teach --onto A...B syntax
rebase: fix --onto A...B parsing and add tests
"rebase --onto A...B" replays history on the merge base between A and B
"checkout A...B" switches to the merge base between A and B
Previously, blank lines and/or comments within a series of
squash/fixup commands would confuse "git rebase -i" into thinking that
the series was finished. It would therefore require the user to edit
the commit message for the squash/fixup commits seen so far. Then,
after continuing, it would ask the user to edit the commit message
again.
Ignore comments and blank lines within a group of squash/fixup
commands, allowing them to be processed in one go.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, blank lines and/or comments within a series of
squash/fixup commands would confuse "git rebase -i" into thinking that
the series was finished. It would therefore require the user to edit
the commit message for the squash/fixup commits seen so far. Then,
after continuing, it would ask the user to edit the commit message
again.
Ignore comments and blank lines within a group of squash/fixup
commands, allowing them to be processed in one go.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When rewriting commits on a topic branch, sometimes it is easier to
compare the version of commits before and after the rewrite if they are
based on the same commit that forked from the upstream. An earlier commit
by Junio (fixed up by the previous commit) gives "--onto A...B" syntax to
rebase command, and rebases on top of the merge base between A and B;
teach the same to the interactive version, too.
Signed-off-by: しらいし ななこ <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach a new option, --autosquash, to the interactive rebase.
When the commit log message begins with "!fixup ...", and there
is a commit whose title begins with the same ..., automatically
modify the todo list of rebase -i so that the commit marked for
squashing come right after the commit to be modified, and change
the action of the moved commit from pick to squash.
Signed-off-by: Nanako Shiraishi <nanako3@lavabit.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rebase -i: abort cleanly if the editor fails to launch
technical-docs: document hash API
api-strbuf.txt: fix typos and document launch_editor()
If the user's configured editor is emacsclient, the editor
will fail to launch if emacs is not running and the git
command that tried to lanuch the editor will abort. For most
commands, all you have to do is to start emacs and repeat
the command.
The "git rebase -i" command, however, aborts without cleaning
the "$GIT_DIR/rebase-merge" directory if it fails to launch the
editor, so you'll need to do "git rebase --abort" before
repeating the rebase command.
Change "git rebase -i" to terminate using "die_abort" (instead of
with "die") if the initial launch of the editor fails.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command is like "squash", except that it discards the commit message
of the corresponding commit.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user has exported the GREP_OPTIONS environment variable, the output
from "grep" and "egrep" in scripted Porcelains may be different from what
they expect. For example, we may want to count number of matching lines,
by "grep" piped to "wc -l", and GREP_OPTIONS=-C3 will break such use.
The approach taken by this change to address this issue is to protect only
our own use of grep/egrep. Because we do not unset it at the beginning of
our scripts, hook scripts run from the scripted Porcelains are exposed to
the same insanity this environment variable causes when grep/egrep is used
to implement logic (e.g. "grep | wc -l"), and it is entirely up to the
hook scripts to protect themselves.
On the other hand, applypatch-msg hook may want to show offending words in
the proposed commit log message using grep to the end user, and the user
might want to set GREP_OPTIONS=--color to paint the match more visibly.
The approach to protect only our own use without unsetting the environment
variable globally will allow this use case.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
help -a: do not unnecessarily look for a repository
Do not try to remove directories when removing old links
rebase -i: more graceful handling of invalid commands
help -i: properly error out if no info viewer can be found
Currently, when there is an invalid command, the rest of the line is
still treated as if the command had been valid, i.e. rebase -i attempts
to produce a patch, using the next argument as a SHA1 name. If there is
no next argument or an invalid one, very confusing error messages
appear (the line was '.'; path to git-rebase-todo substituted):
Unknown command: .
fatal: ambiguous argument 'Please fix this in the file $somefile.':
unknown revision or path not in the working tree.
Use '--' to separate paths from revisions
fatal: Not a valid object name Please fix this in the file $somefile.
fatal: bad revision 'Please fix this in the file $somefile.'
Instead, verify the validity of the remaining line and error out earlier
if necessary.
Signed-off-by: Jan Krüger <jk@jk.gs>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We don't want to use output() on git-commit --amend when rewording the
commit message. This leads to confusion as the editor is run in a
subshell with it's output saved away, leaving the user with a seemingly
frozen terminal.
Fix by removing the output part.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easier to edit just the commit message for a commit
using 'git rebase -i' by introducing the "reword" command.
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a rebase with --onto, the correct test for whether we can skip
rewriting a commit is if it is already on top of $ONTO, not $UPSTREAM.
Without --onto, this distinction does not exist and the behavior does
not change.
In a situation with two merged branches on a common base X:
X---o---o---o---M
\ /
x---x---x---x
Y
if we try to move the branches from their base on X to be based on Y,
so as to get
X
Y---o'--o'--o'--M'
\ /
x'--x'--x'--x'
then we fail. The command `git rebase -p --onto Y X M` moves only the
first-parent chain, like so:
X
\
x---x---x---x
\
Y---o'--o'--o'--M'
because it mistakenly drops the other branch(es) x---x---x---x from
the TODO file. This tests and fixes this behavior.
Signed-off-by: Greg Price <price@ksplice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
it was introduced in 68a163c9b4
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Jöhännës "Dschö" Schindëlin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When picking commits whose parents have not changed, we do not need to
rewrite the commit. We do not need to reset the working directory to
the parent's state, either.
Requested by Sverre Rabbelier.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Actually, I think the issue is pretty independent of submodules; when
"git commit" gets an empty parameter, it misinterprets it as a file.
So avoid passing an empty parameter to "git commit".
Actually, this is a nice cleanup, as MSG_FILE and EDIT_COMMIT were mutually
exclusive; use one variable instead
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d911d14 (rebase -i: learn to rebase root commit, 2009-01-02) tried to
remember the --root flag across a merge conflict in a broken way.
Introduce a flag file $DOTEST/rebase-root to fix and clarify.
While at it, also make sure $UPSTREAM is always initialized to guard
against existing values in the environment.
[tr: added tests]
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are not rebasing with --root, then $# can only be either 1 (base)
or 2 (base and the name of the branch to be rebased).
If we are rebasing with --root, then it is Ok if $# is 0 (rebase the
current branch down to everything) or 1 (rebase the named branch down to
everything).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/rebase-root:
rebase: update documentation for --root
rebase -i: learn to rebase root commit
rebase: learn to rebase root commit
rebase -i: execute hook only after argument checking
Prior to that, if the user chose "squash" as a first action, the stderr
looked like:
grep: /home/madcoder/dev/scm/git/.git/rebase-merge/done: No such file or directory
Cannot 'squash' without a previous commit
Now the first line is gone.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach git-rebase -i a new option --root, which instructs it to rebase
the entire history leading up to <branch>. This is mainly for
symmetry with ordinary git-rebase; it cannot be used to edit the root
commit in-place (it requires --onto <newbase>). Commits that already
exist in <newbase> are skipped.
In the normal mode of operation, this is fairly straightforward. We
run cherry-pick in a loop, and cherry-pick has supported picking the
root commit since f95ebf7 (Allow cherry-picking root commits,
2008-07-04).
In --preserve-merges mode, we track the mapping from old to rewritten
commits and use it to update the parent list of each commit. In this
case, we define 'rebase -i -p --root --onto $onto $branch' to rewrite
the parent list of all root commit(s) on $branch to contain $onto
instead.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, the pre-rebase-hook would be launched before we knew if
the <upstream> [<branch>] arguments were supplied.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
