Although pack-check.c had routine to verify the checksum for the
pack index file itself, the core did not check it before using
it.
This is stolen from the patch to tighten packname requirements.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 797bd6f490 commit)
A proposed change to show cwd relative paths by default from
ls-tree when run from a subdirectory means we would need to
give --full-name option to it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When run from a subdirectory, even though we filtered the output
based on where we were using pathspec, we wrote out the
repository relative paths, not subtree relative paths. This
changes things so that it shows only the current subdirectory
relative paths.
For example, in Documentation subdirectory of git itself, this
used to be the case:
$ git-ls-tree --name-only HEAD | grep how
Documentation/git-show-branch.txt
Documentation/git-show-index.txt
Documentation/howto-index.sh
Documentation/howto
But now it does this instead:
$ git-ls-tree --name-only HEAD | grep how
git-show-branch.txt
git-show-index.txt
howto-index.sh
howto
There are two things to keep in mind.
1. This shows nothing.
$ git-ls-tree --name-only HEAD ../ppc/
This is to make things consistent with ls-files, which
refuses relative path that goes uplevel.
2. These show things in full repository relative paths. In this
case, paths outside the current subdirectory are also shown.
$ git-ls-tree --name-only --full-name HEAD | grep how
Documentation/git-show-branch.txt
Documentation/git-show-index.txt
Documentation/howto-index.sh
Documentation/howto
$ git-ls-tree --name-only --full-name HEAD ../ppc/
ppc/sha1.c
ppc/sha1.h
ppc/sha1ppc.S
The flag --full-name gives the same behaviour as 1.0, so it
ought to be the default if we really care about the backward
compatibility, but in practice no Porcelain runs ls-tree from a
subdirectory yet, and without --full-name is more human
friendly, so hopefully the default being not --full-name would
be acceptable.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-checkout does two very different things, and what they
should do when run from subdirectory are quite different.
It does not make any sense to run the one that switches the
current head from anywhere other than the toplevel:
git-checkout [-f] <branch>
git-checkout [-b <branch>] <committish>
We could of course chdir to top and do the whole-tree checkout
in git-checkout, but the point is the operation does not make
sense on a partial tree. The whole tree is checked out.
The other form is to update the index file and working tree file
selectively:
git-checkout <treeish> <file>... ;# out of tree to index and file
git-checkout -- <file>... ;# out of index to file
This form _does_ make sense to run from subdirectory; and I
myself often wish we supported this.
So here is a patch to do both.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Although pack-check.c had routine to verify the checksum for the
pack index file itself, the core did not check it before using
it.
This is stolen from the patch to tighten packname requirements.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When --show-prefix is useful, sometimes it is easier to cd up to
the toplevel of the tree. This is equivalent to:
git rev-parse --show-prefix | sed -e 's|[^/][^/]*|..|g'
but we do not have to invoke sed for that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier, git-clone stored upstream's master in the branch named 'origin',
possibly overwriting an existing such branch.
Now you can change it by calling git-clone with '-o <other_name>'.
[jc: added ref format check, subdirectory safety, documentation
and usage string.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
sha1_to_hex() returns a pointer to a static buffer. Some of its users
modify that buffer by appending a newline character. Other users rely
on the fact that you can call
printf("%s", sha1_to_hex(sha1));
Just to be on the safe side, terminate the SHA1 in sha1_to_hex().
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Recognize missing files when using http-fetch with file:// URLs
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We want to record the version of the tools the patch was generated with.
While these tools could be rebuilt, git-format-patch stayed the same and
report the wrong version.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Wnen refusing to push a head, we said cryptic "remote 'branch'
object X does not exist on local" or "remote ref 'branch' is not
a strict subset of local ref 'branch'". That was gittish.
Since the most likely reason this happens is because the pushed
head was not up-to-date, clarify the error message to say that
straight, and suggest pulling first.
First noticed by Johannes and seconded by Andreas.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow IPv6address/IPvFuture enclosed by [] in URLs, like:
git push '[3ffe:ffff:...:1]:GIT/git'
or
git push 'ssh://[3ffe:ffff:...:1]/GIT/git'
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows the configuration item whatchanged.difftree to
control the output from git-whatchanged command. For example:
[whatchanged]
difftree = --pretty=fuller --name-status -M
does rename detection, shows the commit header in "fuller"
format and lists affected pathnames and the kind of changes to
them.
When no such configuration item exists, the output format
defaults to "--pretty -M --abbrev".
Signed-off-by: Junio C Hamano <junkio@cox.net>
fprintf and die sometimes have missing/excessive "\n" in their arguments,
correct the strings where I think it would be appropriate.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Slab allocation of llist entries gives some speed improvements.
Not computing the pack_list permutaions all at once reduces memory
usage greatly on repositories with many packs.
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the way the case two branches rename the same path
to different paths is handled. Earlier, the code removed the
original path and added both destinations to the index at
stage0. This commit changes it to leave the original path at
stage1, and two destination paths at stage2 and stage3,
respectively.
[jc: I am not really sure if this makes much difference in the
real life merge situations. What should happen when our branch
renames A to B and M to N, while their branch renames A to M?
That is, M remains in our tree as is.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
HPA suggests it is simply silly to imitate Linux versioning
scheme where the leading "2" does not mean anything anymore, and
I tend to agree.
The first feature release after 1.0.0 will be 1.1.0, and the
development path leading to 1.1.0 will carry 1.0.GIT as the
version number from now on. Similarly, the third maintenance
release that follows 1.0.0 will not be 1.0.0c as planned, but
will be called 1.0.3. The "maint" branch will merge in fixes
and immediately tagged, so there is no need for 1.0.2.GIT that
is in between 1.0.2 (aka 1.0.0b) and 1.0.3.
Signed-off-by: Junio C Hamano <junkio@cox.net>
add_packed_git() tries to get the pack SHA1 by parsing its name. It may
access uninitialized memory for packs with short names.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
quote_c_style_counted() in quote.c uses a hard-to-read construct.
Convert this to a more traditional form of the for loop.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- Avoid misleading success message on error (Johannes)
- objects/info/packs: work around bug in http-fetch.c::fetch_indices()
- http-fetch.c: fix objects/info/pack parsing.
- An off-by-one bug found by valgrind (Pavel)
Signed-off-by: Junio C Hamano <junkio@cox.net>
Insufficient memory is allocated in index-pack.c to hold the *.idx name.
One more byte should be allocated to hold the terminating 0.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a push fails (for example when the remote head does not fast forward
to the desired ref) it is not correct to print "Everything up-to-date".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It failed to register the last pack in the objects/info/packs
file. Also it had an independent overrun error.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The code to fetch pack index files in deployed clients have a
bug that causes it to ignore the pack file on the last line of
objects/info/packs file, so append an empty line to work it
around.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It used to make sense to have git-send-pack talk about the things it sent
when (a) it was a new program and (b) nobody had a lot of tags and
branches.
These days, it's just distracting to see tons of
'refs/tags/xyz': up-to-date
...
when updating a remote repo.
So shut it up by default, and add a "--verbose" flag for those who really
want to see it.
Also, since this makes he case of everything being up-to-date just totally
silent, make it say "Everything up-to-date" if no refs needed updating.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a tricky code and warrants extra commenting. I wasted
30 minutes trying to break it until I realized why it works.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The previous round caught the most trivial case well, but broke
down once index file is updated again. Smudge problematic
entries (they should be very few if any under normal interactive
workflow) before writing a new index file out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes the longstanding "Racy GIT" problem, which was pretty
much there from the beginning of time, but was first
demonstrated by Pasky in this message on October 24, 2005:
http://marc.theaimsgroup.com/?l=git&m=113014629716878
If you run the following sequence of commands:
echo frotz >infocom
git update-index --add infocom
echo xyzzy >infocom
so that the second update to file "infocom" does not change
st_mtime, what is recorded as the stat information for the cache
entry "infocom" exactly matches what is on the filesystem
(owner, group, inum, mtime, ctime, mode, length). After this
sequence, we incorrectly think "infocom" file still has string
"frotz" in it, and get really confused. E.g. git-diff-files
would say there is no change, git-update-index --refresh would
not even look at the filesystem to correct the situation.
Some ways of working around this issue were already suggested by
Linus in the same thread on the same day, including waiting
until the next second before returning from update-index if a
cache entry written out has the current timestamp, but that
means we can make at most one commit per second, and given that
the e-mail patch workflow used by Linus needs to process at
least 5 commits per second, it is not an acceptable solution.
Linus notes that git-apply is primarily used to update the index
while processing e-mailed patches, which is true, and
git-apply's up-to-date check is fooled by the same problem but
luckily in the other direction, so it is not really a big issue,
but still it is disturbing.
The function ce_match_stat() is called to bypass the comparison
against filesystem data when the stat data recorded in the cache
entry matches what stat() returns from the filesystem. This
patch tackles the problem by changing it to actually go to the
filesystem data for cache entries that have the same mtime as
the index file itself. This works as long as the index file and
working tree files are on the filesystems that share the same
monotonic clock. Files on network mounted filesystems sometimes
get skewed timestamps compared to "date" output, but as long as
working tree files' timestamps are skewed the same way as the
index file's, this approach still works. The only problematic
files are the ones that have the same timestamp as the index
file's, because two file updates that sandwitch the index file
update must happen within the same second to trigger the
problem.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since log message in a commit object is defined to be binary
blob, it could be something without an empty line between the
title line and the body text. Be careful to format such into
a form suitable for e-mail submission. There must be an empty
line between the headers and the body.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When I show transcripts to explain how something works, I often
find myself hand-editing the diff-raw output to shorten various
object names in the output.
This adds --abbrev option to the diff family, which shortens
diff-raw output and diff-tree commit id headers.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We had errno==EINTR check after read(2)/write(2) sprinkled all
over the places, always doing continue. Consolidate them into
xread()/xwrite() wrapper routines.
Credits for suggestion goes to HPA -- bugs are mine.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We still advertise "git resolve" as a standalone command, but never
"git octopus", so nobody should be using it and it is safe to
retire it. The functionality is still available as a strategy
backend.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier, "rev-list --objects <sha1>" for an object chain that
does not have any commit failed with a usage message. This
fixes "send-pack remote $tag" where tag points at a non-commit
(e.g. a blob).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also, ensure usage help switches are in the same order.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes "pretty_print_string_list()" to show the git commands
alphabetically in column order, which is the normal one.
Ie instead of doing
git commands available in '/home/torvalds/bin'
----------------------------------------------
add am ...
applypatch archimport ...
cat-file check-ref-format ...
...
it does
git commands available in '/home/torvalds/bin'
----------------------------------------------
add diff-tree ...
am fetch ...
apply fetch-pack ...
...
where each column is sorted.
This is how "ls" sorts things too, and since visually the columns are much
more distinct than the rows, so it _looks_ more sorted.
The "ls" command has a "-x" option that lists entries by lines (the way
git.c used to): if somebody wants to do that, the new print-out logic
could be easily accomodated to that too. Matter of taste and preference, I
guess.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
