The code we use to test if a hook is executable or not differs on
Cygwin from the normal POSIX case. Rather then repeating that for
all three hooks we call in our commit code path we can place the
common logic into a global procedure and invoke it when necessary.
This also lets us get rid of the ugly "|& cat" we were using before
as we can now rely on the Tcl 8.4 feature of "2>@1" or fallback to
the "|& cat" when necessary.
The post-commit hook is now run through the same API, but its outcome
does not influence the commit status. As a result we now show any of
the errors from the post-commit hook in a dialog window, instead of on
the user's tty that was used to launch git-gui. This resolves a long
standing bug related to not getting errors out of the post-commit hook
when launched under git-gui.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
During i18n translation work this message was partially broken
by using "append" instead of "strcat" to join the two different
parts of the message together.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Under core Git the git-commit tool will invoke the commit-msg hook
if it exists and is executable to the user running git-commit. As
a hook it has some limited value as it cannot alter the commit, but
it can modify the message the user is attempting to commit. It is
also able to examine the message to ensure it conforms to some local
standards/conventions.
Since the hook takes the name of a temporary file holding the message
as its only parameter we need to move the code that creates the temp
file up earlier in our commit code path, and then pass through that
file name to the latest stage (where we call git-commit-tree). We let
the hook alter the file as it sees fit and we don't bother to look at
its content again until the commit succeeded and we need the subject
for the reflog update.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we apply a hunk in either direction this may change the file's
status. For example if a file is completely unstaged, and has at
least two hunks in it and the user stages one hunk the file will
change from "Modified, not staged" to "Portions staged for commit".
Resetting the file path causes our trace on this variable to fire;
that trace is used to update the file header in the diff viewer to
the file's current status.
Noticed by Johannes Sixt.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Often users setup a few source files and get a project rolling
before they create a Git repository for it. In such cases the
core Git tools allow users to initialize a new repository by
simply running `git init` at the desired root level directory.
We need to allow the same situation in git-gui; if the user is
trying to make a new repository we should let them do that to any
location they chose. If the directory already exists and already
has files contained within it we still should allow the user to
create a repository there. However we still need to disallow
creating a repository on top of an existing repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I broke this extremely cool feature in 1ac17950,
but it is rather easy to fix this. Sorry for that.
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Concatenating commit log messages from multiple commits works better
when all of the commits end with a clean line break.
Its good to be strict in what you create, and lenient in what you
accept, and since we're creating here, we should always try to
Do The Right Thing(tm).
Signed-off-by: Bernt Hansen <bernt@alumni.uwaterloo.ca>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt pointed out the diff headers "old mode ..." and
"new mode ..." were not being parsed properly by git-gui. We
now include them in the diff viewer for a file.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Previusly, there was only a 16x16 image, which looked very distorted.
Here we add a 32x32 version, and also make the image sharper.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm seeing a lot of silent failures from git-update-index on
Windows and this is leaving the index.lock file intact, which
means users are later unable to perform additional operations.
When the index is locked behind our back and we are unable to
use it we may need to allow the user to delete the index lock
and try again. However our UI state is probably not currect
as we have assumed that some changes were applied but none of
them actually did. A rescan is the easiest (in code anyway)
solution to correct our UI to show what the index really has
(or doesn't have).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Git progress bars from tools like git-push and git-fetch use CR
to skip back to the start of the current line and redraw it with
an updated progress. We were doing this in our Tk widget but had
failed to skip the CR, which Tk doesn't draw well.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Post Git 1.5.3 a new style progress bar has been introduced that
uses only one line rather than two. The formatting of the completed
and total section is also slightly different so we must adjust our
regexp to match. Unfortunately both styles are in active use by
different versions of Git so we need to look for both.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If git-write-tree fails (such as if the index file is currently
locked and it wants to write to it) we were not getting the error
message as $tree_id was always the empty string so we shortcut
through the catch and never got the output from stderr.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apparently native Tcl/Tk on Windows is using \ as the return value
from [file separator] but [file normalize] on that same system is
using / rather than \ to represent a directory separator. I really
think that is nuts, but its what is happening.
So we can actually just hardcode our separator to / as all systems
we support (Windows, Mac OS X, UNIX) use /.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user tries to clone a Git repository that is actually a
workdir of another repository (by way of contrib git-new-workdir)
then the contents of .git is a series of Windows .lnk files which
Tcl can't read if this is a native Tcl process. To read the real
objects directory we need to resolve the link to that location.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On Windows its better to use a shortcut (.lnk file) over a batch
script (.bat) as we can specify the icon file for the .lnk and
thus have these git specific objects appear on the desktop with
that git specific icon file.
Unfortunately the authors of Tcl did not bless us with the APIs
needed to create shortcuts from within Tcl. But Microsoft did
give us Windows Scripting Host which allows us to execute some
JavaScript that calls some sort of COM object that can operate
on a .lnk file.
We now build both Cygwin and non-Cygwin "desktop icons" as proper
Windows .lnk files, using the "Start in" property of these files
to indicate the working directory of the repository the user wants
to launch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On Windows we need to actually setup binds for the accelerator
keys, otherwise the OS doesn't respond to them when the user
presses the key combinations. Apparently we automatically get
these on Mac OS X when we configure the menu commands, but not
on Windows.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Although we are using a text widget here we really do not
want the end-user to be able to modify the text it displays.
So we need to disable it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We need to remove any variable traces we may have installed
when the panel is destroyed as the trace may attempt to use
a widget that no longer exists on this panel.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we show the repository chooser as the primary toplevel (".") we
now offer the major choices not just on the window as hyperlinks but
they also now are shown in the Repository menu, including the recent
repository list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Making a user click twice to select which action they want to perform
when starting git-gui is just wasting their time. Clicking once on a
radio button and then clicking again on the "Next >" button is quite
unnecessary.
Since the recent repository list is shown as a list of hyperlinks we
now offer the 3 basic startup actions as hyperlinks. Clicking on a
link will immediately jump to the next UI panel, saving the user time
as they don't need to click an additional button.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If git-gui is started outside a work tree the repository chooser
will offer a list of recently opened repositories. Clicking on
any list entry directly opens the repository.
The list of recently opened repositories is stored in the config
as the multi-valued option gui.recentrepo. If the list grows beyond
10 entries it will be truncated by removing one of the older entries.
Only repositories that are opened through the repository chooser
will get added to the recent list. Repositories opened from the
shell will not yet be added to the recent list, as users are likely
to have a way to easily return to the same directory via their shell.
[sp: This is actually a combined work from both Steffen and myself.
Most of the ideas are Steffen's, as is the basic outline of
the code, but any outstanding bugs are entirely my fault.]
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A Mac OS X UI convention is to have Cmd-, be the accelerator key
for the preferences window, which by convention is located in the
apple menu under a separator below the about command. We also now
call this "Preferences..." as that is the conventional term used
in English.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sometimes the Fetch menu looks really odd, such as if you are in a
repository that has no remotes configured when you start git-gui.
Here we didn't have any items to add to the Fetch menu so it was a
tad confusing for the end-user to see an empty menu on the menu bar.
We now place all of the commands related to fetching and pushing of
changes into a single "Remote" menu. This way we have a better class
of bucket that we can drop additional remote related items into such
as doing a remote merge or editing the remote configuration specs.
The shortcuts to execute fetch/remote prune/push on existing remote
specifications are now actually submenus listing the remotes by name.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are updating the index to stage or unstage changes or reverting
files in the working directory we can use the progress handling parts
of our status bar to perform this display work, reducing the amount of
code duplication we have in the index handling module.
Unfortunately the status bar is still a strict approximation as it is
unable to know when git-update-index has processed the data we fed to
it. The progress bar is actually a progress of the pipe buffer filling
up in the OS, not of the actual work done. Still, it tells the user we
are working and that has some value.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Most applications tend to have some sort of pretty image in the
about dialog, because it spruces the screen up a little bit and
makes the user happy about reading the information shown there.
We already have a logo in the repository selection wizard so we
can easily reuse this in the about dialog.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The about dialog is getting somewhat long in size and will probably
only get more complex as I try to improve upon its display. As the
options dialog is even more complex than the about dialog we move
the about dialog into its own module to reduce the complexity of the
option dialog module.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
By moving the logo into its own procedure we can use it in
multiple locations within the UI, but still load it only if
the logo is going to be used by the application.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some workflows allow the user to forcefully update a remote branch,
such as in a "proposed updates" (aka "pu") branch where the branch
is rewound and rebuilt on a daily basis against the current master
branch. In such a case the "--force" or leading + must be used to
make git-push execute anyway, even though it may be discarding one
or more commits on the remote side.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Rather than displaying the stock red "Tk" icon in our window
title bars and on the task bar we now show a Git specific logo.
This is Henrik Nyh's logo that we also use in the startup wizard,
scaled to a 16x16 image for Windows task bar usage with a proper
transparent background.
Signed-off-by: Shawn O. Pearce <shawn.o.pearce@bankofamerica.com>
The setup wizard looks better if we layout the progress bar as
two lines: the first line holds the message text and our text
formatting of the progress while the second line holds the bar
itself. Both extend the full width of the window and we try to
pad out the message text so the window doesn't expand when the
completed progress number jumps to the next order of magnitude.
This change required updating the progress meter format string
to allow the application to supply the precision. So we also
are updating all of the translations at once to use the newer
formatting string.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Henrik came up with this alternative logo for gitweb and posted
it on his blog:
http://henrik.nyh.se/2007/06/alternative-git-logo-and-favicon
The msysGit port uses his logo within some of their components,
and frankly it looks better here in git-gui for our repository
setup wizard screen. The logo fits quite nicely along the left
edge of our window, leaving significantly more vertical space
for things like the git-fetch console output.
Because the logo changes the layout charateristics of the setup
window I also needed to adjust some of the padding for our widgets
and stop using a fixed width window size. We now let Tk compute
the correct size of the main window whenever the layout changes,
and drop the window into roughly the upper left 1/3 of the desktop
so its not quite centered but is likely to be far enough away from
any sort of task bars/menu bars/docks that the user may have along
any edge of the screen.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we have added a scrollbar to the console window because one
direction has too much text to fit in the available screen space
we should just keep the scrollbars. Its annoying to watch our
horizontal scrollbar bounce in and out of the window as additional
text is inserted into the widget and the need for the scrollbar
comes and goes.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the console finishes displaying its output and is "done" but
needs to draw a scrollbar to show the final output messages it
is possible for Tk to delete the window namespace before it does
the text widget updates, which means we are unable to add the
horizontal or vertical scrollbar to the window when the text
widget decides it cannot draw all glyphs on screen.
We need to delay deleting the window namespace until we know
the window is not going to ever be used again. This occurs if
we are done receiving output, the command is successful and the
window is closed, or if the window is open and the user chooses
to close the window after the command has completed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the source repository is using an objects/info/alternates file
we need to copy the file to our new repository so that it can access
any objects that won't be copied/hardlinked as they are stored in the
alternate location.
We explicitly resolve all paths in the objects/info/alternates as
relative to the source repository but then convert them into an
absolute path for the new clone. This allows the new clone to
access the exact same locaton as the source repository, even if
relative paths had been used before.
Under Cygwin we assume that Git is Cygwin based and that the paths
in objects/info/alternates must be valid Cygwin UNIX paths, so we
need to run `cygpath --unix` on each line in the alternate list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are doing a "standard" clone by way of hardlinking the
objects (or copying them if hardlinks are not available) the
UI can freeze up for a good few seconds while Tcl scans all
of the object directories. This is espeically noticed on a
Windows system when you are working off network shares and
need to wait for both the NT overheads and the network.
We now show a progress bar as we count the objects and build
our list of things to copy. This keeps the user amused and
also makes sure we run the Tk event loop often enough that
the window can still be dragged around the desktop.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we failed to create our test hardlink for the first object
we need to link/copy then the only recourse we have is to make
a copy of the objects. Users don't really need to know the OS
details about why the hardlink failed as its usually because
they are crossing filesystem boundaries.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We shouldn't create scrollbars for the horziontal or vertical sides
unless there is enough content to make it worth drawing these widgets
on screen. This way users don't loose screen space to objects that
won't help them navigate the display.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are started outside of a git repository than it is likely
the user started us from some sort of desktop shortcut icon in
the operating system. In such a case the user is expecting us to
prompt them to locate the git repository they want to work on,
or to help them make a new repository, or to clone one from an
existing location. This is a very simple wizard that offers the
user one of these three choices.
When we clone a repository we always use the name `master` in the
local repository, even if the remote side does not appear to point
to that name. I chose this as a policy decision. Much of the Git
documentation talks about `master` being the default branch in a
repository and that's what git-init does too. If the remote side
doesn't call its default branch `master` most users just don't care,
they just want to use Git the way the documentation describes.
Rather than relying on the git-clone Porcelain that ships with
git we build the new repository ourselves and then obtain content
by git-fetch. This technique simplifies the entire clone process
to roughly: `git init && git fetch && git pull`. Today we use
three passes with git-fetch; the first pass gets us the bulk of
the objects and the branches, the second pass gets us the tags,
and the final pass gets us the current value of HEAD to initialize
the default branch.
If the source repository is on the local disk we try to use a
hardlink to connect the objects into the new clone as this can
be many times faster than copying the objects or packing them and
passing the data through a pipe to index-pack. Unlike git-clone
we stick to pure Tcl [file link -hard] operation thus avoiding the
need to fork a cpio process to setup the hardlinks. If hardlinks
do not appear to be supported (e.g. filesystem doesn't allow them or
we are crossing filesystem boundaries) we use file copying instead.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The console window titles should also be marked up with i18n strings so
these can be properly localized.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sometimes we use a Tk text widget as though it were a listbox.
This happens typically when we want to show an icon to the left
of the text label or just when a text widget is generally a better
choice then the native listbox widget.
In these cases if we want the user to have control over the selection
we implement our own "in_sel" tag that shows the selected region
and we perform our own selection management in the background
via keybindings and mouse bindings. In such uses we don't want
the user to be able to activate the native platform selection by
dragging their mouse through the text widget. Doing so creates a
very confusing display and the user is left wondering what it may
mean to have two different types of selection in the same widget.
Tk doesn't allow us to delete the "sel" tag that it uses internally
to manage the native selection but it will allow us to make it
invisible by setting the tag to have the same display properties
as unselected text. So long as we don't actually use the "sel"
tag for anything in code its effectively invisible.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Tcl expression "[append [mc Foo] Bar]" does not return the string
"FooBar" after translation; instead it is setting the variable Foo to
the value Bar, or if Foo is already defined it is appending Bar onto
the end of it. This is *not* what we wanted to have happen here.
Tcl's join function is actually the correct function but its default
joinStr argument is a single space. Unfortunately all of our call
sites do not want an extra space added to their string. So we need
a small wrapper function to make the call to join with an empty
join string. In C this is (roughly) the job of the strcat function.
Since strcat is not yet used at the global level it is a reasonable
name to use here.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In 9adccb05 Matthijs Melchior changed our selection colors in the
main index/working directory file lists to use a lightgray as the
background color as this made the UI easier to read on all platforms.
When we did that change we missed doing also doing in the file
browser UI. Doing so just makes the entire thing UI consistent.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Most of these changes were suggested by Shawn Pearce in an answer
to Johannes Schindelin.
Some strings for the blame module were added too.
[sp: Minor edits in blame module formatting]
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
git-gui: Paper bag fix "Commit->Revert" format arguments
git-gui: Provide 'uninstall' Makefile target to undo an installation
git-gui: Font chooser to handle a large number of font families
The recent bug fix to correctly handle filenames with %s (or any
other valid Tcl format specifier) missed a \ on this line and
caused the remaining format arguments to not be supplied when we
updated the status bar. This caused a Tcl error anytime the user
was trying to perform a file revert.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Simon Sasburg noticed that on X11 if there are more fonts than can
fit in the height of the screen Tk's native tk_optionMenu does not
offer scroll arrows to the user and it is not possible to review
all choices or to select those that are off-screen. On Mac OS X
the tk_optionMenu works properly but is awkward to navigate if the
list is long.
This is a rewrite of our font selection by providing a new modal
dialog that the user can launch from the git-gui Options panel.
The dialog offers the user a scrolling list of fonts in a pane.
An example text shows the user what the font looks like at the size
they have selected. But I have to admit the example pane is less
than ideal. For example in the case of our diff font we really
should show the user an example diff complete with our native diff
syntax coloring.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Acked-by: Simon Sasburg <simon.sasburg@gmail.com>
Commit is used as both verb and noun. While these happen to be
the same in some languages, they are not the same in all
languages, so disambiguate them using context-sensitive i18n.
Signed-off-by: Harri Ilari Tapio Liusvaara <hliusvaa@cc.hut.fi>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Currently the Git plumbing is not localized so it does not know how
to output weekday and month names that conform to the user's locale
preferences. This doesn't fit with the rest of git-gui's UI as some
of our dates are formatted in Tcl and some are just read from the Git
plumbing so dates aren't consistently presented.
Since git-for-each-ref is presenting us formatted dates and it offers
no way to change that setting even in git 1.5.3.1 we need to first do
a parse of the text strings it produces, correct for timezones, then
reformat the timestamp using Tcl's formatting routines.
Not exactly what I wanted to do but it gets us consistently presented
date strings in areas like the blame viewer and the revision picker
mega-widget's tooltips.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Someone on #git today pointed out that the revision chooser's tooltips
are were being drawn with untranslated strings for the fixed labels we
include, such as "updated", "commit" and "remote". These strings are
now passed through mc to allow them to be localized.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If `git ls-files --others` returned us the name of a directory then
it is because Git has decided that this directory itself contains a
valid Git repository and its files shouldn't be listed as untracked
for this repository.
In such a case we should label the object as a Git repository and
not just as a directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-gui has a minor problem with regards to symlinks that point
to directories.
git init
mkdir realdir
ln -s realdir linkdir
git gui
Now clicking on file names in the "unstaged changes" window,
there's a problem coming from the "linkdir" symlink: git-gui
complains with
error reading "file4": illegal operation on a directory
...even though git-gui can add that same symlink to the index just
fine.
This patch fix this by adding a check.
[sp: Minor fix to use {link} instead of "link" in condition
and to only open the path if it is not a symlink.]
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
git-gui: Avoid use of libdir in Makefile
git-gui: Disable Tk send in all git-gui sessions
git-gui: lib/index.tcl: handle files with % in the filename properly
Steps to reproduce the bug:
$ mkdir repo && cd repo && git init
Initialized empty Git repository in .git/
$ touch 'foo%3Fsuite'
$ git-gui
Then click on the 'foo%3Fsuite' icon to include it in a changeset, a
popup comes with:
'Error: bad field specifier "F"'
Vincent Danjean noticed the problem and also suggested the fix, reported
through
http://bugs.debian.org/441167
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
git-gui: Properly set the state of "Stage/Unstage Hunk" action
git-gui: Fix detaching current branch during checkout
git-gui: Correct starting of git-remote to handle -w option
Conflicts:
git-gui.sh
If the user tried to detach their HEAD while keeping the working
directory on the same commit we actually did not completely do
a detach operation internally. The problem was caused by git-gui
not forcing the HEAD symbolic ref to be updated to a SHA-1 hash
when we were not switching revisions. Now we update the HEAD ref
if we aren't currently detached or the hashes don't match.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Dots in a UI string usually mean that a dialog box will
appear waiting for further input. So this patch removes
unneeded dots for actions that do not require user's
input.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The procedure [mc ...] will translate the strings through msgcat.
Strings must be enclosed in quotes, not in braces, because otherwise
xgettext cannot extract them properly, although on the Tcl side both
delimiters would work fine.
[jes: I merged the later patches to that end.]
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Earlier when I rewrote the merge implementation for git-gui I broke
it such that the conflict markers for the "theirs" side of the hunk
was using a full SHA-1 ID in hex, rather than the name of the branch
the user had merged. This was because I got paranoid and passed off
the full SHA-1 to git-merge, instead of giving it the reference name
the user saw in the merge dialog.
I'd still like to resolve the SHA-1 upfront in git-gui and always use
that value throughout the merge, but I can't do that until we have a
full implementation of git-merge written in Tcl. Until then its more
important that the conflict markers be useful to the end-user, so we
need to pass off the ref name and not the SHA-1 ID.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
cehteh on #git noticed that secondary windows such as console
windows from push/fetch/merge or the blame browser failed on ion
when we tried to open them a second time.
The issue turned out to be the fact that on ion [winfo ismapped .]
returns false if . is not visible right now because it has been
obscured by another window in the same panel. So we need to keep
track of whether or not the root window has been displayed for this
application, and once it has been we cannot ever assume that ismapped
is going to return true.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is just a small code movement to cleanup how we generate
the command line for a merge. I'm only doing it to make the
next series of changes slightly more readable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a replacement of all of the icons in our tree browser
window, as the prior icons just looked too 1980s Tk-ish. The
icons used here are actually from a KDE themed look, so they
might actually be familiar to some users of git-gui.
Aside from using more modern looking icons we now have a special
icon for executable blobs, to make them stand out from the normal
non-executable blobs. We also denote symlinks now with a different
icon, so they stand out from the other types of objects in the tree.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are started for only a blame/browser/citool run we don't
usually initialize the list of remotes, or determine which refs
are tracking branches and which are local branch heads. This is
because some of that work is relatively expensive and is usually
not going to be needed if we are started only for a blame, or to
make a single commit.
However by not loading the remote configuration we were crashing
if the user tried to open a browser for another branch through
the Repository menu, as our load_all_heads procedure was unable
to decide which refs/heads/ items were actually local heads. We
now force all remote configuration data to be loaded if we have
not done so already and we are trying to create a revision mega
widget.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Resetting a large number of files on a slow filesystem can take
considerable time, just as switching branches in such a case can
take more than two seconds. We now take advantage of the progress
meter output by read-tree and show it in the main window status
bar, just like we do during checkout (branch switch).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Also, the warning message when clicking "Reset" is adapted to
the wording "Reset" rather than a confusion "Cancel commit?".
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are being asked to merge a tracking branch that comes from a
remote repository accessed by the very common SSH URL format of
"user@host:/path/to/repo" then we really don't need the username
as part of the merge message, it only clutters up the history and
makes things more confusing. So we instead clip the username part
off if the local filesystem path is absolute, as its probably not
going to be an ambiguous URL even when it is missing the username.
On the other hand we cannot clip the username off if the URL is
not absolute, because in such cases (e.g. "user@host:myrepo") the
directory that the repository path is resolved in is relative to
the user's home directory, and the username becomes important.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are merging a tracking branch we know exactly what remote URL
that branch is fetched from, and what its name is on that remote
repository. In this case we can setup a merge message that looks
just like a standard `git-pull $remote $branch` operation by filling
out FETCH_HEAD before we start git-merge, and then run git-merge just
like git-pull does.
I think the result of this behavior is that merges look a lot nicer
when the came off of local tracking branches, because they no longer
say "commit 'origin/...'" to describe the commit being merged but
instead now mention the specific repository we fetched those commits
from.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that we only support merging one branch we can offer the user
a better user interface experience by allowing them to select the
revision they want to merge through our revision picking widget.
This change neatly solves the problem of locating a branch out of
a sea of 200 tracking branches, and of dealing with very long branch
names that all have a common prefix.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we can we now show the last modification date of a loose ref as
part of the tooltip information shown in the revision picker. This
gives the user an indication of when was the last time that the ref
was modified locally, and may especially be of interest when looking
at a tracking branch.
If we cannot find the loose ref file than we try to fallback on the
reflog and scan it for the date of the last record. We don't start
with the reflog however as scanning it backwards from the end is not
an easy thing to do in Tcl. So I'm being lazy here and just going
through the entire file, line by line. Since that is less efficient
than a single stat system call, its our fallback strategy.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Our revision chooser mega-widget now sets up tooltips for itself so
that it displays details about a commit (or a tag and the commit
it refers to) when the user mouses over that line in the filtered
ref list. If the item is from a remote tracking branch then we also
show the remote url and what branch on that remote we fetch from, so
the user has a clear concept of where that revision data originated.
To help the merge dialog I've also added a new constructor that
makes the dialog only offer unmerged revisions (those not in HEAD),
as this allows users to avoid performing merges only to get "Already
up to date" messages back from core Git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm storing the URLs of any pre-configured remote repositories
that we happen to come across so that we can later use these
URLs to show to the user in parts of the UI that might care.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are checking out the branch we are already on then there is no
need to call symbolic-ref to update the HEAD pointer to the "new"
branch name, it is already correct.
Currently this situation does not happen very often, but it can be
seen in some workflows where the user always recreates their local
branch from a remote tracking branch and more-or-less ignores what
branch he/she is on right now. As they say, ignorance is bliss.
This case will however become a tad more common when we overload
checkout_op to actually also perform all of our merges. In that
case we will likely see that the branch we want to "checkout" is
the current branch, as we are actually just merging into it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
My earlier introduction of the GITGUI_BCK file (which saves the user's
commit message buffer while they are typing it) broke the Quit function.
If the user makes a commit we delete the GITGUI_BCK file; if they then
immediately quit the application we fail to rename the GITGUI_BCK file
to GITGUI_MSG. This is because the file does not exist, but our flag
still says it does. The root cause is we did not unset the flag during
commit.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are trying to checkout a local branch which is matched to a
remote tracking branch, but the local branch is newer than the remote
tracking branch we actually just want to switch to the local branch.
The local branch is "Already up to date".
Unfortunately we tossed away the local branch's commit SHA-1 and kept
the remote tracking branch's SHA-1, which meant that the user lost the
local changes when we updated the working directory. At least we did
not update the local branch ref, so the user's data was still intact.
We now toss the tracking branch's SHA-1 and replace with the local
branch's SHA-1 before the checkout, ensuring that we pass of the right
tree to git-read-tree when we update the working directory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is actually just an underlying code improvement that has no user
visible component yet. UI improvements to actually fetch and merge via
an arbitrary remote with no tracking branches must still follow to make
this change useful for the end-user.
Our tracking branch specifications are a Tcl list of three components:
- local tracking branch name
- remote name/url
- remote branch name/tag name
This change just makes the first element optional. If it is an empty
string we will run the fetch, but have the value be saved only into the
special .git/FETCH_HEAD, where we can pick it up and use it for this one
time operation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I totally missed this obvious optimization in the checkout code path.
If our current repository HEAD is actually at the commit we are moving
to, and we agreed to perform this switch earlier, then we have no files
to update in the working directory and any stale mtimes are simply not
of consequence right now. We can pretend like we ran a read-tree and
skip right into the post-read-tree work, such as updating the branch
and setting the symbolic-ref.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we are given a merge type we don't understand in checkout_op there
is probably a bug in git-gui somewhere that allowed this unknown merge
strategy to come into this part of the code path. We currently only
recognize three merge types ('none', 'ff' and 'reset') but are going
to be supporting more in the future. Rather than keep editing this
message I'm going with a very generic "Uh, we don't do that!" type of
error.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In both the ff and reset merge_types supported by checkout_op the
result is the same if the merge base of our target commit and the
existing commit is the existing commit: its a fast-forward as the
existing commit is fully contained in the target commit.
This minor cleanup in logic will make it easier to implement a
new kind of merge_type that actually merges the two trees with a
real merge strategy, such as git-merge-recursive.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I've decided to teach checkout_op how to perform more than just a
fast-forward and reset type of merge. This way we can also do a full
recursive merge even when we are recreating an existing branch from
a remote. To help with that process I'm saving the merge-base we
computed during the ff/reset/fail decision process, in case we need
it later on when we actually start a true merge operation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A few users have been seeing crashes in Tk when using the undo key
binding to undo the last few keystroke events in the commit buffer.
Unfortunately that means the user loses their commit message and
must start over from scratch when the user restarts the process.
git-gui now saves the user's commit message buffer every couple of
seconds to a temporary file under .git (specifically .git/GITGUI_BCK).
At exit time we rename this file to .git/GITGUI_MSG if there is a
message, the file exists, and it is currently synchronized with the
Tk buffer. Otherwise we do our usual routine of saving the Tk buffer
to .git/GITGUI_MSG and delete .git/GITGUI_BCK, if it exists.
During startup we favor .git/GITGUI_BCK over .git/GITGUI_MSG. This
way a crash doesn't take out the user's message buffer but instead
will cause the user to lose only a few keystrokes. Most people do
not type more than 200 WPM, and with 30 possible saves per minute
we are unlikely to lose more than 7 words.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm working on refactoring the UI of the merge dialog, because as it
currently stands the dialog is absolutely horrible, especially when
you have 200+ branches available from a single remote system.
In that refactoring I plan on using the choose_rev widget to allow
the user to select exactly which branch/commit they want to merge.
However since that only selects a single commit I'm first removing
the code that supports octopus merges.
A brief consultation on #git tonight seemed to indicate that the
octopus merge strategy is not as useful as originally thought when
it was invented, and that most people don't commonly use them. So
making users fall back to the command line to create an octopus is
actually maybe a good idea here, as they might think twice before
they use it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we haven't yet loaded any commit information for a given line but
our tooltip timer fired and tried to draw the tooltip we shouldn't;
there is nothing to show.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a essentially a copy of Paul Mackerras encoding support from
gitk. I stole the code from gitk commit fd8ccbec4f, as Paul has
already done all of the hard work setting up this translation table.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I've found that the class code makes it a whole lot easier to create
more complex GUI code, especially the dialogs. So before I make any
major improvements to the merge dialog's interface I'm going to first
switch it to use the class system, so the code is slightly cleaner.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Showing only five lines of heads/tags is not very useful to a user
when they have about 10 branches that match the filter expression.
The list is just too short to really be able to read easily, at
least not without scrolling up and down. Expanding the list out
to 10 really makes the revision picker easier to read and access,
as you can read the matching branches much more quickly.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We now allow users to pick which commit they want to browse through
our revision picking mega-widget. This opens up in a dialog first,
and then opens a tree browser for that selected commit. It is a very
simple approach and requires minimal code changes.
I also clarified the language a bit in the Repository menu, to show
that these actions will access files. Just in case a user is not
quite sure what specific action they are looking for, but they know
they want some sort of file thing.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Like our blame subcommand the browser subcommand now accepts both
a revision and a path, just a revision or just a path. This way
the user can start the subcommand on any branch, or on any subtree.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm moving the code related to looking to see if we should GC now
into a procedure closer to where it belongs, the database module.
This reduces our script by a few lines for the single commit case
(aka citool). But really it just is to help organize the code.
We now perform the check after we have been running for at least
1 second. This way the main window has time to open up and our
dialog (if we open it) will attach to the main window, instead of
floating out in no-mans-land like it did before on Mac OS X.
I had to use a wait of a full second here as a wait of 1 millisecond
made our console install itself into the main window. Apparently we
had a race condition with the console code where both the console and
the main window thought they were the main window.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we have more than our desired number of objects and we try to
open the "Do you want to repack now?" dialog we cannot include a
-parent . argument if the main window has not been mapped yet.
On Mac OS X it appears this window isn't mapped right away, so we
had better hang avoid including it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On Windows (which includes Cygwin) Tcl defaults to leaving the EOF
character of input file streams set to the ASCII EOF character, but
if that character were to appear in the data stream then Tcl will
close the channel early. So we have to disable eofchar on Windows.
Since the default is disabled on all platforms except Windows, we
can just disable it everywhere to prevent any sort of read problem.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This cat-file was done on maint, where we did not have git_read
available to us. But here on master we do, so we should make
use of it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
From Johannes Sixt <J.Sixt@eudaptics.com>:
> It seems that MSYS's wish does some quoting for Bourne shells,
> in particular, escape the first '{' of the "^{tree}" suffix, but
> then it uses cmd.exe to run "git rev-parse". However, cmd.exe does
> not remove the backslash, so that the resulting rev expression
> ends up in git's guts as unrecognizable garbage: rev-parse fails,
> and git-gui hickups in a way that it must be restarted.
Johannes originally submitted a patch to this section of commit.tcl
to use `git rev-parse $PARENT:`, but not all versions of Git will
accept that format. So I'm just taking the really simple approach
here of scanning the first line of the commit to grab its tree.
About the same cost, but works everywhere.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because we are trying to execute /bin/sh we know it must be a real
Windows executable and thus ends with the standard .exe suffix.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We cannot execute the git directory, it is not a valid Tcl command
name. Instead we just want to pass it as an argument to our sq
proc.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we get more than 80 characters of text in a single line odds
are it is output from git-fetch or git-push and its showing a
lot of detail off to the right edge that is not so important to
the average user. We still want to make sure we show everything
we need, but we can get away with that information being off to
the side with a horizontal scrollbar.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Our file browser was showing bad output as it did not properly buffer
a partial record when read from `ls-tree -z`. This did not show up on
my Mac OS X system as most trees are small, the pipe buffers generally
big and `ls-tree -z` was generally fast enough that all data was ready
before Tcl started to read. However on my Cygwin system one of my
production repositories had a large enough tree and packfile that it
took a couple of pipe buffers for `ls-tree -z` to complete its dump.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We now embed any GIT_* and SSH_* environment variables as well as
the path to the git wrapper executable into the Mac OS X .app file.
This should allow us to restore the environment properly when
we restart.
We also try to use proper Bourne shell single quoting when we can,
as this avoids any sort of problems that might occur due to a path
containing shell metacharacters.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that we are pretty strict about setting up own absolute paths to
any git helper (saving a marginal runtime cost to resolve the tool)
we can do the same in our console widget by making sure all console
execs go through git_read if they are a git subcommand, and if not
make sure they at least try to use the Tcl 2>@1 IO redirection if
possible, as it should be faster than |& cat.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Rather than making the C library search for git every time we want
to execute it we now search for the main git wrapper at startup, do
symlink resolution, and then always use the absolute path that we
found to execute the binary later on. This should save us some
cycles, especially on stat challenged systems like Cygwin/Win32.
While I was working on this change I also converted all of our
existing pipes ([open "| git ..."]) to use two new pipe wrapper
functions. These functions take additional options like --nice
and --stderr which instructs Tcl to take special action, like
running the underlying git program through `nice` (if available)
or redirect stderr to stdout for capture in Tcl.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Sometimes switching between branches can take more than a second or
two, in which case `git checkout` would normally have shown a small
progress meter to the user on the terminal to let them know that we
are in fact working, and give them a reasonable idea of when we may
finish.
We now do obtain that progress meter from read-tree -v and include
it in our main window's status bar. This allows users to see how
many files we have checked out, how many remain, and what percentage
of the operation is completed. It should help to keep users from
getting bored during a large checkout operation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that we have a fancy status bar mega-widget we can reuse that
within our main window. This opens the door for implementating
future improvements like a progress bar.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Our blame viewer has had a very fancy progress bar at the bottom of
the window that shows the current status of the blame engine, which
includes the number of lines completed as both a text and a graphical
meter. I want to reuse this meter system in other places, such as
during a branch switch where read-tree -v can give us a progress
meter for any long-running operation.
This change extracts the code and refactors it as a widget that we
can take advantage of in locations other than in the blame viewer.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user double clicks a branch in the checkout dialog then they
probably want to start the checkout process on that branch. I found
myself doing this without realizing it, and of course it did nothing
as there was no action bound to the listbox's Double-Button-1 event
handler. Since I did it without thinking, others will probably also
try, and expect the same behavior.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we have specifications listed in our revision picker mega-widget
then we should default the selection within that widget to the first
ref available. This way the user does not need to use the spacebar
to activate the selection of a ref within the box; instead they can
navigate up/down with the arrow keys and be done with it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a major rewrite of the way we perform switching between
branches and the subsequent update of the working directory. Like
core Git we now use a single code path to perform all changes: our
new checkout_op class. We also use it for branch creation/update
as it integrates the tracking branch fetch process along with a
very basic merge (fast-forward and reset only currently).
Because some users have literally hundreds of local branches we
use the standard revision picker (with its branch filtering tool)
to select the local branch, rather than keeping all of the local
branches in the Branch menu. The branch menu listing out all of
the available branches is simply not sane for those types of huge
repositories.
Users can now checkout a detached head by ticking off the option
in the checkout dialog. This option is off by default for the
obvious reason, but it can be easily enabled for any local branch
by simply checking it. We also detach the head if any non local
branch was selected, or if a revision expression was entered.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
I'm really starting to dislike global variables. The ui_status_value
global varible is just one of those that seems to appear in a lot of
code and in many cases we didn't even declare it "global" within the
proc that updates it so we haven't always been getting all of the
updates we expected to see.
This change introduces two new global procs:
ui_status $msg; # Sets the status bar to show $msg.
ui_ready; # Changes the status bar to show "Ready."
The second (special) form is used because we often update the area
with this message once we are done processing a block of work and
want the user to know we have completed it.
I'm not fixing the cases that appear in lib/branch.tcl right now
as I'm actually in the middle of a huge refactoring of that code
to support making a detached HEAD checkout.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user is creating a new local branch and has selected to use
a tracking branch as the starting revision they probably want to
make sure they are using the absolute latest version available of
that branch.
We now offer a checkbox "Fetch Tracking Branch" (on by default)
that instructs git-gui to run git-fetch on just that one branch
before resolving the branch name into a commit SHA-1 and making
(or updating) the local branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In some workflows users will want to almost always just create a new
local branch that matches a remote branch. In this type of workflow
it is handy to have the new branch dialog default to "Match Tracking
Branch" and "Starting Revision"-Tracking Branch", with the focus in
the branch filter field. This can save users working on this type
of workflow at least two mouse clicks every time they create a new
local branch or switch to one with a fast-forward.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When trying to create a branch from a tag most people are looking
for a recent tag, not one that is ancient history. Rather than
sorting tags by their string we now sort them by taggerdate, as
this places the recent tags at the top of the list and the very
old ones at the end. Tag date works nicely as an approximation
of the actual history order of commits.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
One of my production repositories has hundreds of remote tracking
branches. Trying to navigate these through a popup menu is just
not possible. The list is far larger than the screen and it does
not scroll fast enough to efficiently select a branch name when
trying to create a branch or delete a branch.
This is major rewrite of the revision chooser mega-widget. We
now use a single listbox for all three major types of named refs
(heads, tracking branches, tags) and a radio button group to pick
which of those namespaces should be shown in the listbox. A filter
field is shown to the right allowing the end-user to key in a glob
specification to filter the list they are viewing. The filter is
always taken as substring, so we assume * both starts and ends the
pattern the user wanted but otherwise treat it as a glob pattern.
This new picker works out really nicely. What used to take me at
least a minute to find and select a branch now takes mere seconds.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user elects to create a local branch that has the same name
as an existing branch and we can fast-forward the local branch to
the selected revision we might as well do the fast-forward for the
user, rather than making them first switch to the branch then merge
the selected revision into it. After all, its really just a fast
forward. No history is lost. The resulting branch checkout may
also be faster if the branch we are switching from is closer to
the new revision.
Likewise we also now allow the user to reset the local branch if
it already exists but would not fast-forward. However before we
do the actual reset we tell the user what commits they are going to
lose by showing the oneline subject and abbreviated sha1, and we also
let them inspect the range of commits in gitk.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some workflows have users create a local branch that matches a remote
branch they have fetched from another repository. If the user wants
to push their changes back to that remote repository then they probably
want to use the same branch name locally so that git-gui's push dialog
can setup the push refspec automatically.
To prevent typos with the local branch name we now offer an option to
use the remote tracking branch name as the new local branch name.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In the next change I want to let the user create their local branch
name to match the remote branch name, so that the existing push
dialog can push the branch back up to the remote repository without
needing to do any sort of remapping. To do that we need to know
exactly what branch name the remote system is using.
So all_tracking_branches returns a list of specifications, where
each specification is itself a list of:
- local ref name (destination we fetch into)
- remote name (repository we fetch from)
- remote ref name (source ref we fetch from)
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Most people using Git 1.5.x and later are using the newer style
of remotes layout where all of their tracking branches are in
refs/remotes and refs/heads contains only the user's own local
branches.
In such a situation we can avoid calling is_tracking_branch
for each head we are considering because we know that all of
the heads must be local branches if no fetch option or Pull:
line maps a branch into that namespace.
If however any remote maps a remote branch into a local
tracking branch that resides in refs/heads we do exactly
what we did before, which requires scanning through all
fetch lines in case any patterns are matched.
I also switched some regexp/regsub calls to string match
as this can be a faster operation for prefix matching.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A simple refactoring of the delete branch dialog to allow use of
the class construct to better organize the code and to reuse the
revision selection code of our new choose_rev mega-widget.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This rather large change pulls the "Starting Revision" part of the
new branch dialog into a mega widget that we can use anytime we
need to select a commit SHA-1. To make use of the mega widget I
have also refactored the branch dialog to use the class system,
much like the delete remote branch dialog already does.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Its handy to be able to ask an object to do something for you by
handing it a subcommand. For example if we want to get the value
of an object's private field the object could expose a method that
would return that value. Application level code can then invoke
"$inst get" to perform the method call.
Tk uses this pattern for all of its widgets, so we'd certainly
like to use it for our own mega-widgets that we might develop.
Up until now we haven't needed such functionality, but I'm working
on a new revision picker mega-widget that would benefit from it.
To make this work we have to change the definition of $this to
actually be a procedure within the namespace. By making $this a
procedure any caller that has $this can call subcommands by passing
them as the first argument to $this. That subcommand then needs
to call the proper subroutine.
Placing the dispatch procedure into the object's variable namespace
ensures that it will always be deleted when the object is deleted.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Our blame viewer only grabbed the first initial of the git.git
author string "Simon 'corecode' Schubert". Here the problem was we
looked at Simon, pulled the S into the author initials, then saw
the single quote as the start of the next name and did not like
this character as it was not an uppercase letter.
We now skip over single quoted nicknames placed within the author
name field and grab the initials following it. So the above name
will get the initials SS, rather than just S.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The blame window shows "who wrote the piece originally" and "who
moved it there" in two columns. In order to identify the former
more correctly, it helps to use the new -w option.
[sp: Minor change to only enable -w if underlying git >= 1.5.3]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Recently in git.git change b4372ef136 Johannes Schindelin taught
git-commit.sh to invoke (or skip) calling git-rerere based upon
the rerere.enabled configuration setting:
So, check the config variable "rerere.enabled". If it is set
to "false" explicitely, do not activate rerere, even if
.git/rr-cache exists. This should help when you want to disable
rerere temporarily.
If "rerere.enabled" is not set at all, fall back to detection
of the directory .git/rr-cache.
We now do the same logic in git-gui's own commit implementation.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
git-gui: Ensure windows shortcuts always have .bat extension
git-gui: Include a Push action on the left toolbar
git-gui: Bind M1-P to push action
git-gui: Don't bind F5/M1-R in all windows
Conflicts:
git-gui.sh
Apparently under some setups on Windows Tk is hiding our file
extension recommendation of ".bat" from the user and that is
allowing the user to create a shortcut file which has no file
extension. Double clicking on such a file in Windows Explorer
brings up the associate file dialog, as Windows does not know
what application to launch.
We now append the file extension ".bat" to the filename of the
shortcut file if it has no extension or if it has one but it is
not ".bat".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The status field of the remote branch delete dialog was marked to
expand, which meant that if the user grew the window vertically
most of the new vertical height was given to the status field and
not to the branch list. Since the status field is just a single
line of text there is no reason for it to gain additional height,
instead we should make sure all additional height goes to the
branch list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Most users these days are using a windowing system attached to a
monitor that has more than 600 pixels worth of vertical space
available for application use. As most files stored by Git are
longer than they are wide (have more lines than columns) we want
to dedicate as much vertical space as we can to the viewer.
Instead of always starting the window at ~600 pixels high we now
start the window 100 pixels shorter than the screen claims it has
available to it. This -100 rule is used because some popular OSen
add menu bars at the top of the monitor, and docks on the bottom
(e.g. Mac OS X, CDE, KDE). We want to avoid making our window too
big and causing the window's resize control from being out of reach
of the user.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Pressing the escape key while in the merge dialog cancels the merge
and correctly unlocks the index. Unfortunately this is not true of
the Cancel button, using it closes the dialog but does not release
the index lock, rendering git-gui frozen until you restart it. We
now properly release the index lock when the Cancel button is used.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
git-gui: Don't require a .pvcsrc to create Tools/Migrate menu hack
git-gui: Don't nice git blame on MSYS as nice is not supported
git-gui: Don't require $DISPLAY just to get --version
Johannes Sixt reported that MinGW/MSYS does not have a nice.exe to
drop the priority of a child process when it gets spawned. So we
have to avoid trying to start `git blame` through nice when we are
on Windows and do not have Cygwin available to us.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The blame viewer is composed of two different areas, the file
area on top and the commit area on the bottom. If users are
trying to shift the focus it is probably because they want to
shift from one area to the other, so we just setup Tab and
Shift-Tab to jump from the one half to the other in a cycle.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because Tk does not assure us the order that it will process
children in before it destroys the main toplevel we cannot safely
save our geometry data during a "bind . <Destroy>" event binding.
The geometry may have already changed as a result of a one or
more children being removed from the layout. This was pointed
out in gitk by Mark Levedahl, and patched over there by commit
b6047c5a81.
So we now also use "wm protocol . WM_DELETE_WINDOW" to detect when
the window is closed by the user, and forward that close event to
our main do_quit routine.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Earlier git.git applied a large "war on whitespace" patch that was
created using 'apply --whitespace=strip'. Unfortunately a few of
git-gui's own files got caught in the mix and were also cleaned up.
That was a6080a0a44.
This patch is needed in git-gui.git to reapply those exact same
changes here, otherwise our version generator script is unable to
obtain our version number from git-describe when we are hosted in
the git.git repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint: (38 commits)
git-gui: Changed blame header bar background to match main window
git-gui: Favor the original annotations over the recent ones
git-gui: Improve our labeling of blame annotation types
git-gui: Use three colors for the blame viewer background
git-gui: Jump to original line in blame viewer
git-gui: Display both commits in our tooltips
git-gui: Run blame twice on the same file and display both outputs
git-gui: Display the "Loading annotation..." message in italic
git-gui: Rename fields in blame viewer to better descriptions
git-gui: Label the uncommitted blame history entry
git-gui: Switch internal blame structure to Tcl lists
git-gui: Cleanup redundant column management in blame viewer
git-gui: Better document our blame variables
git-gui: Remove unused commit_list from blame viewer
git-gui: Automatically expand the line number column as needed
git-gui: Make the line number column slightly wider in blame
git-gui: Use lighter colors in blame view
git-gui: Remove unnecessary space between columns in blame viewer
git-gui: Remove the loaded column from the blame viewer
git-gui: Clip the commit summaries in the blame history menu
...
The main window's diff header bar background switched from orange
to gold recently, and I liked the effect it had on readability of
the text. Since I wanted the blame viewer to match, here it is.
Though this probably should be a user defined color, or at least
a constant somewhere that everyone can reference.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Usually when you are looking at blame annotations for a region of
a file you are more interested in why something was originally
done then why it is here now. This is because most of the time
when we get original annotation data we are looking at a simple
refactoring performed to better organize code, not to change its
semantic meaning or function. Reorganizations are sometimes of
interest, but not usually.
We now show the original commit data first in the tooltip. This
actually looks quite nice as the original commit will usually have an
author date prior to the current (aka move/copy) annotation's commit,
so the two commits will now tend to appear in chronological order.
I also found myself to always be clicking on the line of interest
in the file column but I always wanted the original tracking data
and not the move/copy data. So I changed our default commit from
$asim_data (the simple move/copy annotation) to the more complex
$amov_data (the -M -C -C original annotation).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It feels wrong to call the -M -C -C annotations "move/copy tracking"
as they are actually the original locations. So I'm relabeling
the status bar to show "copy/move tracking annotations" for the
current file (no -M -C -C) as that set of annotations tells us who
put the hunk here (who moved/copied it). I'm now calling the -M
-C -C pass "original location annotations" as that's what we're
really digging for.
I also tried to clarify some of the text in the hover tooltip.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
To prevent neighboring lines that are different commits from using
the same background color we now use 3 colors and assign them
by selecting the color that is not used before or after the line
in question. We still color "on the fly" as we receive hunks from
git-blame, but we delay our color decisions until we are getting
the original location data (the slower -M -C -C pass) as that is
usually more fine-grained than the current location data.
Credit goes to Martin Waitz for the tri-coloring concept.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the user clicks on a commit link within one of the columns
in the blame viewer we now jump them not just to that commit/file
pair but also to the line of the original file. This saves the
user a lot of time, as they don't need to search through the new
file data for the chunk they were previously looking at.
We also restore the prior view when the user clicks the back button
to return to a pior commit/file pair that they were looking at.
Turned out this was quite tricky to get working in Tk. Every time
I tried to jump the text widgets to the correct locations by way
of the "yview moveto" or "see" subcommands Tk performed the change
until the current event finished dispatching, and then reset the
views back to 0, making the change never take place. Forcing Tk
to run the pending events before we jump the UI resolves the issue.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we have commit data from both the simple blame and the
rename/move tracking blame and they differ than there is a
bigger story to tell. We now include data from both commits
so that the user can see that this link as moved, who moved
it, and where it originated from.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We now perform two passes over any input file given to the blame
viewer. Our first pass is a quick "git-blame" with no options,
getting the details of how each line arrived into this file. We
are specifically ignoring/omitting the rename detection logic as
this first pass is to determine why things got into the state they
are in.
Once the first pass is complete and is displayed in the UI we run
a second pass, using the much more CPU intensive "-M -C -C" options
to perform extensive rename/movement detection. The output of this
second pass is shown in a different column, allowing the user to see
for any given line how it got to be, and if it came from somewhere
else, where that is.
This is actually very instructive when run on our own lib/branch.tcl
script. That file grew recently out of a very large block of code
in git-gui.sh. The first pass shows when I created that file, while
the second pass shows the original commit information.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user clicks on a line region that we haven't yet received
an annotation for from git-blame we show them "Loading annotation".
But I don't want the user to confuse this loading message with a
commit whose first line is "Loading annotation" and think we messed
up our display somehow. Since we never use italics for anything
else, I'm going with the idea that italic slant can be used to show
data is missing/elided out at the time being.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Calling the commit message pane $w_cmit is a tad confusing when
we also have the $w_cgrp column that shows the abbreviated SHA-1s.
So w_cmit -> w_cviewer, as it is the "commit viewer"; and
w_cgrp -> w_amov as it is the "annotated commit + move tracking"
column. Also changed line_data -> amov_data, as that list is
exactly the results shown in w_amov.
Why call the column "move tracking"? Because this column holds
data from "git blame -M -C". I'm considering adding an additional
column that holds the data from "git blame" without -M/-C, showing
who did the copy/move, and when they did it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user runs the blame viewer on a working directory file
instead of a specific commit-ish then we have no value for the
commit SHA1 or the summary line; this causes the history menu
to get an empty entry at the very bottom. We now look for this
odd case and call the meny entry "Working Directory".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The Tcl list datatype is significantly faster to work with than
the array type, especially if our indexes are a consecutive set
of numbers, like say line numbers in a file.
This rather large change reorganizes the internal data structure
of the blame viewer to use a proper Tcl list for the annotation
information about a line. Each line is given its own list within
the larger line_data list, where the indexes correspond to various
facts about that particular line.
The interface does seem to be more responsive this way, with less
time required by Tcl to process blame, and to switch to another
version of the same file. It could just be a placebo effect, but
either way most Tcl experts perfer lists for this type of work over
arrays.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The code to handle our three different text widgets is a bit
on the messy side as we issue the same command on all three
widgets one at a time. Adding (or removing) columns from the
viewer is messy, as a lot of locations need to have the new
column added into the sequence, or removed from it.
We also now delete the tags we create for each commit when
we switch to display another "commit:path" pair. This way the
text viewer doesn't get bogged down with a massive number of tags
as we traverse through history.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The array variable "order" used to be used to tell us in what
order each commit was received in. Recent changes have removed
that need for an ordering and the "order" array is now just a
boolean 'do we have that commit yet' flag.
The colors were moved to fields, so they appear inside of the
blame viewer instance. This keeps two different concurrently
running blame viewers from stepping on each other's ordering
of the colors in group_colors.
Most of the other fields were moved around a little bit so
that they are organized by major category and value lifespan.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This list used to store the commits in the order we received
them in. I originally was using it to update the colors of
the commit before and the commit after the current commit,
but since that interface concept turned out to be horribly
ugly and has been removed we no longer need this list.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
After we finish reading a chunk of data from the file stream
we know how many digits we need in the line number column to
show the current maximum line number. If our line number column
isn't wide enough, we should expand it out to the correct width.
Any file over our default allowance of 5 digits (99,999 lines)
is so large that the slight UI "glitch" when we widen the column
out is trivial compared to the time it will take Git to fully do
the annotations.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Most source code files are under 9,999 lines of text, so using a
field width of 5 characters meant that we should have had one char
padding on the left edge (because we right-justify the line number).
Unfortunately when I added the right margin earlier (when I removed
the padding) I ate into the extra character's space, losing the left
margin. This put the line numbers too close to the commit column in
any file with more than 999 lines in it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The colors I originally picked out on a Mac OS X system look a
tad too dark on a Windows 2000 system; the greys are dark enough
to make it difficult to read some lines of text and the green used
to highlight the current commit was also difficult to read text on.
I also added a third grey to the mix, to try and help some files
that wind up with a number of neighboring chunks getting the same
colors.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
On Mac OS X the OS has "features" that like to draw thick black
borders around the text field that has focus. This is nice if
you want to know where your text is going and are blind as a bat,
but it isn't the best thing to have in a table that is being
faked through the abuse of Tk text widgets.
By setting our takefocus, highlightthickness and padx/y we can
get rid of this border and get our text widgets packed right next
to each other, with no padding between them. This makes the blame
background color smoothly run across the entire line of commit data,
line number and file content.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Originally I had placed this loaded column between the line number
and the file line data to help users know if a particular line has
received annotation data or not yet. This way users would know if
the line(s) they were interested in were ready for viewing, or if
they still had to wait. It also was an entertaining way for the
user to spend their time waiting for git-blame --incremental to
compute the complete set of annotations.
However it is completely useless now that we show the abbreviated
commit SHA-1 and author initials in the leftmost column. That area
is empty until we get the annotation data, and as soon as we get it
in we display something there, indicating to the user that there is
now blame data ready. Further with the tooltips the user is likely
to see the data as soon as it comes in, as they are probably not
keeping their mouse perfectly still. So I'm removing the field to
save screen space for more useful things, like file content.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some commit lines can get really long when users enter a lot of
text without linewrapping (for example). Rather than letting the
menu get out of control in terms of width we clip the summary to
the first 50+ characters.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Apparently Tk on Mac OS X won't draw a button with an image using a
transparent background. Instead it draws the button using some sort
of 3D effect, even though I asked for no relief and no border. The
background is also not our orange that we expected it to be.
Earlier I had tried this same trick on Windows and it draws the same
way as the button did, so I'm going to switch to the label as that
seems to be more portable.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If we have two commits right next to each other in the final
file and they were kept as different blocks in the leftmost
column then its probably because the original filename was
different. To help the user know where they are digging into
when they click on that link we now show the original file in
the tooltip, but to save space we do so only if the original
file is not the same as the file we are currently viewing.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Consecutive chunks of a file could come from the same commit, but
have different original file names. Previously we would have put
them into a single group, but then the hyperlink would jump to only
one of the files, and the other would not be accessible. Now we can
get to the other file too.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
gitweb has long had a feature where the user can click on any
commit the blame display and go visit that commit's information
page. From the user could go get the blame display for the file
they are tracking, and try to digg through the history of any
part of the code they are interested in seeing.
We now offer somewhat similiar functionality in git-gui. The 4
digit commit abreviation in the first column of our blame view is
now offered as a hyperlink if the commit isn't the one we are now
viewing the blame output for (as there is no point in linking back
to yourself). Clicking on that link will stop the current blame
engine (if still running), push the new target commit onto the
history stack, and restart the blame viewer at that commit, using
the "original file name" as supplied by git-blame for that chunk
of the output.
Users can navigate back to a version they had been viewing before
by way of a back button, which offers the prior commits in a popup
menu displayed right below the back button. I'm always showing the
menu here as the cost of switching between views is very high; you
don't want to jump to a commit you are not interested in looking at
again.
During switches we throw away all data except the cached commit data,
as that is relatively small compared to most source files and their
annotation marks. Unfortunately throwing this per-file data away in
Tcl seems to take some time; I probably should move the line indexed
arrays to proper lists and use [lindex] rather than the array lookup
(usually lists are faster).
We now start the git-blame process using "nice", so that its priority
will drop hopefully below our own. If I don't do this the blame engine
gets a lot of CPU under Windows 2000 and the git-gui user interface is
almost non-responsive, even though Tcl is just sitting there waiting
for events.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Computing the blame records for a large file with a long project
history can take git a while to run; traditionally we have shown
a little meter in the status area of our blame viewer that lets
the user know how many lines have been finished, and how far we
are through the process.
Usually such progress indicators are drawn with a little progress
bar in the window, where the bar shows how much has been completed
and hides itself when the process is complete. I'm using a very
simple hack to do that: draw a canvas with a filled rectangle.
Of course the time remaining has absolutely no relationship to the
progress meter. It could take very little time for git-blame to get
the first 90% of the file, and then it could take many times that to
get the remaining 10%. So the progress meter doesn't really have any
sort of assurances that it relates to the true progress of the work.
But in practice on some ugly history it does seem to hold a reasonable
indicator to the completion status. Besides, its amusing to watch and
that keeps the user from realizing git is being somewhat slow.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
At one point I tried to present the blame viewer to an audience of
people on a 640 by 480 pixel LCD projector. This did not work at
all as the top area (the file data) was taking up all of the screen
realestate and the split point was not adjustable by the user. In
general locking the user into a specific ratio of display is just
not user friendly.
So we now place a split pane control into the middle of our blame
window, so the user can adjust it to their current needs. If the
window increases (or decreases) in height we assign the difference
to the file data area, as that is generally the area of the window
that users are trying to see more of when they grow the window.
Unfortunately there appears to be a bug in the "pack" layout manager
in Tcl/Tk 8.4.1. The status bar and the lower commit pane was being
squashed if the window decreased in height. I think the pack manager
was just not decreasing the size of the panedwindow slave properly if
the main window shrank. Switching to the "grid" layout manager fixes
the problem, but is slightly uglier setup code.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Frequently when I'm looking at blocks of code in the blame
viewer I want to know who is the culprit, or who I should
be praising for a job well done. The tooltips nicely show
this if I mouse over a block, but it doesn't work to get
this detail at a glance.
Since we don't use the leftmost commit column for anything
after the first line within a commit group I'm now tossing
the author's initials into that field, right justified. It
is quite clearly not a SHA-1 number as we always show the
SHA-1 in lowercase, while we explicitly select only the
uppercase characters from an author's name field, and only
those that are following whitespace.
I'm using initials here over anything else as they are quite
commonly unique within small development teams. The leading
part of the email address field was out for some of the teams
I work with, as there the email addresses are all of the form
"Givenname.Surname@initech.com". That will never fit into the
4 characters available.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The | in the continued lines of the same commit group as not
easily seen on the left edge; putting a single space in front
of the pipe makes it slightly more visually appealing to me as
I can follow the line down through the group to the next commit
marker.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because we no longer redraw colors every time we select a particular
commit there is no need to redraw the screen after we get a new commit
in from blame --incremental.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The selected commit's blame header is now drawn in green, using
the same background color that is shown in the main file content
viewer. The result is a much better looking commit pane, as we
use bold for header "keys" and proportional width fonts for the
stuff that doesn't need to be fixed width to maintain its formatting.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When the mouse is over a particular line and we have blame data
for that line, but its not the active commit, we should show the
user information about that commit like who the author was and
what the subject (first line) was.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since we don't allow the user to select text from the file
viewer right now I'm disabling the normal text cursor and
putting in a plain arror instead. This way users don't
think they can select and copy text, because they can't.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If two consecutive lines in the final file came from the same commit
then we store a "|" in the first column rather than the commit id,
for the second and subsequent lines in that block. This cleans up
the interface so runs associated with the same commit can be more
easily seen visually.
We also now use the abbreviation "work" for the uncommitted stuff in
your working directory, rather than "0000". This looks nicer to the
eyes and explains pretty quickly what is going on.
There was also a minor bug in the commit abbreviation column for the
last line of the file. This is now also fixed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The git-gui blame viewer has always been ugly as s**t. Linus Torvalds
suggested the coloring scheme I'm using here, which is two different
shades of grey for the background colors, and black text on a pale green
background for the currently selected/focused commit.
The difference is a massive improvement. The interface no longer will
cause seizures in people who are prone to that sort of thing. It no
longer uses a very offensive hot pink. The green being current actually
makes sense. And not having the background of the other non-current
lines change when you change the current commit is really a big deal.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The blame viewer has this silly blank line at the bottom of it;
we really don't want to see it displayed as we will never get
any blame data for that line (it doesn't exist in the source).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A lot of this code was pre-class, which meant that I just sort of
copied and pasted my way through it, rather than being really smart
and using a variable for each widget's path name. Since we have a
field for each path, we can use those throughout the constructor
and make things a lot neater.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We now show the first 4 digits of each commit in the left most
column of our blame viewer, before the line numbers. These are
drawn as the data becomes available from git-blame --incremental,
and helps the user to visually group lines together.
I'm using only the first 4 digits because within a given cluster
of lines its unlikely that two neighboring commits will have the
same 4 digit prefix.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt pointed out that dropping to 0 lines of context
does allow the user to get more fine-grained hunk selection,
especially since we don't currently support "highlight and
apply (or revert)".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user has no branches at all (their refs/heads/ is empty)
and they are on a detached HEAD we have a valid repository but
there are no branches to populate into the branch pulldown in
the create branch dialog. Instead of erroring out we can skip
that part of the dialog, much like we do with tracking branches
or tags when the user doesn't have any.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Recently git-merge learned to avoid generating the diffstat after
a merge by reading the merge.diffstat configuration option. By
default this option is assumed to be true, as that is the old
behavior. However we can force it to false by setting it as a
standard boolean option.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Git has supported remote branch deletion for quite some time, but
I've just never gotten around to supporting it in git-gui. Some
workflows have users push short-term branches to some remote Git
repository, then delete them a few days/weeks later when that topic
has been fully merged into the main trunk. Typically in that style
of workflow the user will want to remove the branches they created.
We now offer a "Delete..." option in the Push menu, right below the
generic "Push..." option. When the user opens our generic delete
dialog they can select a preconfigured remote, or enter a random
URL. We run `git ls-remote $url` to obtain the list of branches and
tags known there, and offer this list in a listbox for the user to
select one or more from.
Like our local branch delete dialog we offer the user a way to filter
their selected branch list down to only those branches that have been
merged into another branch. This is a very common operation as the
user will likely want to select a range of topic branches, but only
delete them if they have been merged into some sort of common trunk.
Unfortunately our remote merge base detection is not nearly as strict
as the local branch version. We only offer remote heads as the test
commit (not any local ones) and we require that all necessary commits
to successfully run git-merge-base are available locally. If one or
more is missing we suggest that the user run a fetch first.
Since the Git remote protocol doesn't let us specify what the tested
commit was when we evaluated our decision to execute the remote delete
there is a race condition here. The user could do a merge test against
the trunk, determine a topic branch was fully merged, but before they
can start pushing the delete request another user could fast-forward
the remote topic branch to a new commit that is not merged into the
trunk. The delete will arrive after, and remove the topic, even though
it was not fully merged.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Git's native command line interface has had branch renaming
support for quite a while, through the -m/-M options to the
git-branch command line tool. This is an extremely useful
feature as users may decide that the name of their current
branch is not an adequate description, or was just entered
incorrectly when it was created.
Even though most people would consider git-branch to be a
Porcelain tool I'm using it here in git-gui as it is the
only code that implements the rather complex set of logic
needed to successfully rename a branch in Git. Currently
that is along the lines of:
*) Backup the ref
*) Backup the reflog
*) Delete the old ref
*) Create the new ref
*) Move the backed up reflog to the new ref
*) Record the rename event in the reflog
*) If the current branch was renamed, update HEAD
*) If HEAD changed, record the rename event in the HEAD reflog
*) Rename the [branch "$name"] section in the config file
Since that is some rather ugly set of functionality to implement
and get right, and some of it isn't easily accessible through the
raw plumbing layer I'm just cheating by relying on the Porcelain.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Because we now try to automatically guess the library directory
in certain installations users may wonder where git-gui is getting
its supporting files from. We now display this location in our
About dialog, and we also include the location we are getting our
Git executables from.
Unfortunately users cannot use this 'About git-gui' dialog to
troubleshoot library loading problems; the dialog is defined by
code that exists in the library directory, creating a catch-22.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
In some workflows it is common for a large number of temporary
branches to be created in a remote repository, get fetched to
clients that typically only use git-gui, and then later have
those branches deleted from the remote repository once they have
been fully merged into all destination branches. Users of git-gui
would obviously like to have their local tracking branches cleaned
up for them, otherwise their local tracking branch namespace would
grow out of control.
The best known way to remove these tracking branches is to run
"git remote prune <remotename>". Even though it is more of a
Porcelain command than plumbing I'm invoking it through the UI,
because frankly I don't see a reason to reimplement its ls-remote
output filtering and config file parsing.
A new configuration option (gui.pruneduringfetch) can be used to
automatically enable running "git remote prune <remotename>" after
the fetch of that remote also completes successfully. This is off
by default as it require an additional network connection and is
not very fast on Cygwin if a large number of tracking branches have
been removed (due to the 2 fork+exec calls per branch).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This is a simple change to match what gitk does when it shows
a commit; we format using ISO dates (yyyy-mm-dd HH:MM:SS).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We can use [list ...] rather than "", especially when we are talking
about values as then they are properly escaped if necessary. Small
nit, but probably not a huge deal as the only data being inlined here
is Tk paths.
Some of the lines in the parser code were longer than 80 characters
wide, and they actually were all the same value on the end part of
the line. Rather than keeping the mess copied-and-pasted around we
can set the last argument into a local variable and reuse it many
times.
The commit display code was also rather difficult to read on an 80
character wide terminal, so I'm moving it all into a double quoted
string that is easier to read.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user doesn't give us a revision parameter to our blame
subcommand then we can generate blame against the working tree
file by passing the file path off to blame with the --contents
argument. In this case we cannot obtain the contents of the
file from the ODB; instead we must obtain the contents by
reading the working directory file as-is.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Our blame viewer code has historically been a mess simply
because the data for multiple viewers was all crammed into
a single pair of Tcl arrays. This made the code hard to
read and even harder to maintain.
Now that we have a slightly better way of tracking the data
for our "meta-widgets" we can make use of it here in the
blame viewer to cleanup the code and make it easier to work
with long term.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If a variable reference to a field is to an array, and it is
the only reference to that field in that method we cannot make
it an inlined [set foo] call as the regexp was converting the
Tcl code wrong. We were producing "[set foo](x)" for "$foo(x)",
and that isn't valid Tcl when foo is an array. So we just punt
if the only occurance has a ( after it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
