Use libcurl's high-level API functions to implement git-imap-send
instead of the previous low-level OpenSSL-based functions.
Since version 7.30.0, libcurl's API has been able to communicate with
IMAP servers. Using those high-level functions instead of the current
ones would reduce imap-send.c by some 1200 lines of code. For now,
the old ones are wrapped in #ifdefs, and the new functions are enabled
by make if curl's version is >= 7.34.0, from which version on curl's
CURLOPT_LOGIN_OPTIONS (enabling IMAP authentication) parameter has been
available. The low-level functions will still be used for tunneling
into the server for now.
As I don't have access to that many IMAP servers, I haven't been able to
test the new code with a wide variety of parameter combinations. I did
test both secure and insecure (imaps:// and imap://) connections and
values of "PLAIN" and "LOGIN" for the authMethod.
In order to suppress a sparse warning about "using sizeof on a
function", we use the same solution used in commit 9371322a6
("sparse: suppress some "using sizeof on a function" warnings",
06-10-2013) which solved exactly this problem for the other commands
using libcurl.
Helped-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Bernhard Reiter <ockham@raz.or.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Profile feedback always failed for me with -jN. The problem
was that there was no implicit ordering between the profile generate
stage and the profile use stage. So some objects in the later stage
would be linked with profile generate objects, and fail due
to the missing -lgcov.
This adds a new profile target that implicitely enforces the
correct ordering by using submakes. Plus a profile-install target
to also install. This is also nicer to type that PROFILE=...
Plus I always run the performance test suite now for the full
profile run.
In addition I also added a profile-fast / profile-fast-install
target the only runs the performance test suite instead of the
whole test suite. This significantly speeds up the profile build,
which was totally dominated by test suite run time. However
it may have less coverage of course.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Python 2.4 lacks the following features:
subprocess.check_call
struct.pack_into
Take a cue from 460d1026 and provide an implementation of the
CalledProcessError exception. Then replace the calls to
subproccess.check_call with calls to subprocess.call that check the return
status and raise a CalledProcessError exception if necessary.
The struct.pack_into in t/9802 can be converted into a single struct.pack
call which is available in Python 2.4.
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Acked-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Python 2.5 and older do not accept None as the first argument to
translate() and complain with:
TypeError: expected a character buffer object
As suggested by Pete Wyckoff, let's just replace the call to translate()
with a regex search which should be more clear and more portable.
This allows git-p4 to be used with Python 2.5.
Signed-off-by: Brandon Casey <bcasey@nvidia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since commit 6cf378f (docs: stop using asciidoc no-inline-literal),
we no longer support asciidoc versions less than 8.4.1,
which introduced inline literals. Note this in the INSTALL
document.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4 out of contrib/fast-import into the main code base,
aside other foreign SCM tools.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was a number of problems I ran into when trying the
profile-directed optimizations added by Andi Kleen in git commit
7ddc2710b9. (This was using gcc 4.4 found on many enterprise
distros.)
1) The -fprofile-generate and -fprofile-use commands are incompatible
with ccache; the code ends up looking in the wrong place for the gcda
files based on the ccache object names.
2) If the makefile notices that CFLAGS are different, it will rebuild
all of the binaries. Hence the recipe originally specified by the
INSTALL file ("make profile-all" followed by "make install") doesn't
work. It will appear to work, but the binaries will end up getting
built with no optimization.
This patch fixes this by using an explicit set of options passed via
the PROFILE variable then using this to directly manipulate CFLAGS and
EXTLIBS.
The developer can run "make PROFILE=BUILD all ; sudo make
PROFILE=BUILD install" automatically run a two-pass build with the
test suite run in between as the sample workload for the purpose of
recording profiling information to do the profile-directed
optimization.
Alternatively, the profiling version of binaries can be built using:
make PROFILE=GEN PROFILE_DIR=/var/cache/profile all
make PROFILE=GEN install
and then after git has been used for a while, the optimized version of
the binary can be built as follows:
make PROFILE=USE PROFILE_DIR=/var/cache/profile all
make PROFILE=USE install
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recent releases of Redhat/Fedora are reported to ship Perl binary package
with some core modules stripped away (see http://lwn.net/Articles/477234/)
against the upstream Perl5 people's wishes. The Time::HiRes module used by
gitweb one of them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the skeleton implementation of i18n in Git to one that can show
localized strings to users for our C, Shell and Perl programs using
either GNU libintl or the Solaris gettext implementation.
This new internationalization support is enabled by default. If
gettext isn't available, or if Git is compiled with
NO_GETTEXT=YesPlease, Git falls back on its current behavior of
showing interface messages in English. When using the autoconf script
we'll auto-detect if the gettext libraries are installed and act
appropriately.
This change is somewhat large because as well as adding a C, Shell and
Perl i18n interface we're adding a lot of tests for them, and for
those tests to work we need a skeleton PO file to actually test
translations. A minimal Icelandic translation is included for this
purpose. Icelandic includes multi-byte characters which makes it easy
to test various edge cases, and it's a language I happen to
understand.
The rest of the commit message goes into detail about various
sub-parts of this commit.
= Installation
Gettext .mo files will be installed and looked for in the standard
$(prefix)/share/locale path. GIT_TEXTDOMAINDIR can also be set to
override that, but that's only intended to be used to test Git itself.
= Perl
Perl code that's to be localized should use the new Git::I18n
module. It imports a __ function into the caller's package by default.
Instead of using the high level Locale::TextDomain interface I've
opted to use the low-level (equivalent to the C interface)
Locale::Messages module, which Locale::TextDomain itself uses.
Locale::TextDomain does a lot of redundant work we don't need, and
some of it would potentially introduce bugs. It tries to set the
$TEXTDOMAIN based on package of the caller, and has its own
hardcoded paths where it'll search for messages.
I found it easier just to completely avoid it rather than try to
circumvent its behavior. In any case, this is an issue wholly
internal Git::I18N. Its guts can be changed later if that's deemed
necessary.
See <AANLkTilYD_NyIZMyj9dHtVk-ylVBfvyxpCC7982LWnVd@mail.gmail.com> for
a further elaboration on this topic.
= Shell
Shell code that's to be localized should use the git-sh-i18n
library. It's basically just a wrapper for the system's gettext.sh.
If gettext.sh isn't available we'll fall back on gettext(1) if it's
available. The latter is available without the former on Solaris,
which has its own non-GNU gettext implementation. We also need to
emulate eval_gettext() there.
If neither are present we'll use a dumb printf(1) fall-through
wrapper.
= About libcharset.h and langinfo.h
We use libcharset to query the character set of the current locale if
it's available. I.e. we'll use it instead of nl_langinfo if
HAVE_LIBCHARSET_H is set.
The GNU gettext manual recommends using langinfo.h's
nl_langinfo(CODESET) to acquire the current character set, but on
systems that have libcharset.h's locale_charset() using the latter is
either saner, or the only option on those systems.
GNU and Solaris have a nl_langinfo(CODESET), FreeBSD can use either,
but MinGW and some others need to use libcharset.h's locale_charset()
instead.
=Credits
This patch is based on work by Jeff Epler <jepler@unpythonic.net> who
did the initial Makefile / C work, and a lot of comments from the Git
mailing list, including Jonathan Nieder, Jakub Narebski, Johannes
Sixt, Erik Faye-Lund, Peter Krefting, Junio C Hamano, Thomas Rast and
others.
[jc: squashed a small Makefile fix from Ramsay]
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The preformatted documentation pages live in their own repositories
these days. Adjust the installation procedure to the updated layout.
Tested-by: Stefan Naewe <stefan.naewe@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the ASCIIDOC8 and ASCIIDOC_NO_ROFF knobs were built,
many people were still on asciidoc 7 and using older
versions of docbook-xsl. These days, even the almost
2-year-old Debian stable needs these knobs turned.
So let's turn them by default. The new knobs ASCIIDOC7 and
ASCIIDOC_ROFF can be used to get the old behavior if people
are on older systems.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without additional configuration steps, the documentation build on Cygwin
fails because the XML catalog is missing required rewrites for certain
docbook resources.
This patch documents the required configuration.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new scripts automatically saved in the bin-wrappers directory allow
you to run a build when you have neither installed git nor tweaked
environment variables. Mention this in INSTALL, along with the slight
performance issue of doing so.
This can be especially handy for manually testing network-invoked git
(from ssh, web servers, or similar), but it is also handy with a plain
command prompt.
Signed-off-by: Matthew Ogilvie <mmogilvi_git@miniinfo.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We said that some of our dependencies were optional, but didn't say
how to turn them off. Add information for that and mention where to
save the options close to the top of the file.
Also, standardize on both using quotes for the names of the dependencies
and tabs for indentation of the list.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The most important and non-optional dependencies should go first, so put
them there. While we're moving them, the descriptions for shell and perl
were archaic, referring to "bare-bones Porcelainish scripts" that have
become powerful and essential.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We haven't had Mozilla's code or an ARM optimized algorithm since
30ae47b. Reword the paragraph to give credit but not authorship to
Mozilla.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use dblatex in order to create a pdf version of the git user manual. No
existing Makefile targets (including "all") are touched, so you need to
explicitly say
make pdf
sudo make install-pdf
to get user-manual.pdf created and installed.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces new build targets "man" and "html" which allow building
the documentation in the respective formats separately. This helps
people with a partial documentation build chain: html pages can be built
without xmlto.
This is documented in INSTALL now, together with corrections: Before,
instructions in INSTALL would build man+html but install man only. Now
the instructions build and install both, and new and pre-existing
targets are explained.
Note that build targets "doc" and "man" correspond to install targets
"install-doc install-html" and "install-doc" respectively. This
inconsistency is not changed, in order to keep everyone's build scripts
from breaking.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch introduces a make target "quick-install-html" which installs
the html documentation from the branch origin/html, without the need for
asciidoc/xmlto. This is analogous to the existing "quick-install-doc"
target for the man pages.
We advertise these targets in the INSTALL file now.
Signed-off-by: Michael J Gruber <michaeljgruber+gmane@fastmail.fm>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The mention of 1997 was correct when it was made, and it still is true
to some extent (http://savannah.gnu.org/forum/forum.php?forum_id=5189
says it has not been actively maintained for quite some time). However,
because its name changed not to conflict with us, it is no longer
relevant whether many users use gnuit or have moved away to graphical
file managers.
The only people possibly affected are people who have older version of
gnuit installed as "git".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The old text stated that 'git-frotz' can be always used instead of 'git
frotz' which is no longer true.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone.sh was the last user of the "curl" executable. Relevant git
commands now use libcurl instead. This should be reflected in the
install requirements.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In recent versions GNU's git has been renamed to gnuit, document this
while talking about how to resolve the conflict.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since a64d7784e8 git merge doesn't use cpio
anymore, adapt the documentation.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We haven't used bignum in rev-list from openssl nor elsewhere
for a long time. Also git-gui is now part of git.git itself,
and depends on wish.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since a long time, we have inbuilt diff generation.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that we have git-merge-file, an RCS merge lookalike, we no longer
need it. So long, merge, and thanks for all the fish!
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The distinction between BASIC_ vs ALL_ is still kept, since it
is not Git.xs specific -- we could face the same issue when we
do other language bindings (e.g. Python).
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (166 commits)
git-apply --binary: clean up and prepare for --reverse
Fix detection of ipv6 on Solaris
Look for sockaddr_storage in sys/socket.h
Solaris has strlcpy() at least since version 8
git-apply --reverse: simplify reverse option.
t4116 apply --reverse test
Make sha1flush void and remove conditional return.
Make upload_pack void and remove conditional return.
Make track_tree_refs void.
Make pack_objects void.
Make fsck_dir void.
Make checkout_all void.
Make show_entry void
Make pprint_tag void and cleans up call in cmd_cat_file.
Remove combine-diff.c::uninteresting()
read-cache.c cleanup
http-push.c cleanup
diff.c cleanup
builtin-push.c cleanup
builtin-grep.c cleanup
...
While at it fill git version information in configure.ac
configure target needs autoconf, of course.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jn/make:
Set datarootdir in config.mak.in
Quote all calls to GIT_CONF_APPEND_LINE
Typofix in configure.ac comment.
configure.ac vertical whitespace usage cleanup
autoconf: Checks for some programs
autoconf: Checks for libraries
autoconf: Checks for some library functions.
autoconf: Checks for typedefs, structures, and compiler characteristics.
autoconf: Preparing the way for autodetection
Copy description of build configuration variables to configure.ac
Teach make clean about configure and autoconf
autoconf: Use autoconf to write installation directories to config.mak.autogen
This makes the Git perl scripts check $GITPERLLIB instead of
$RUNNING_GIT_TESTS, which makes more sense if you are setting up your shell
environment to use a non-installed Git instance.
It also weeds out the @INC munging from the individual scripts and makes
Makefile add it during the .perl files processing, so that we can change
just a single place when we modify this shared logic. It looks ugly in the
scripts, too. ;-)
And instead of doing arcane things with the @INC array, we just do 'use lib'
instead, which is essentialy the same thing anyway.
I first want to do three separate patches but it turned out that it's quite
a lot neater when bundled together, so I hope it's ok.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is beginning of patch series introducing installation configuration
using autoconf (and no other autotools) to git. The idea is to generate
config.mak.autogen using ./configure (generated from configure.ac by running
autoconf) from config.mak.in, so one can use autoconf as an _alternative_ to
ordinary Makefile, and creating one's own config.mak. Local settings in
config.mak override generated settings in config.mak.autogen
This patch includes minimal configure.ac and config.mak.in, so one can set
installation directories using autoconf generated ./configure script
e.g. ./configure --prefix=/usr
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
