If I disable git-shell's interactive mode by removing the
~/git-shell-commands directory, attempts to ssh in to the service
produce a message intended for the administrator:
$ ssh git@myserver
fatal: Interactive git shell is not enabled.
hint: ~/git-shell-commands should exist and have read and execute access.
$
That is helpful for the new admin who is wondering "What? Why isn't
the git-shell I just set up working?", but once the site setup is
complete, it would be better to give the user a friendly hint that she
is on the right track, like GitHub does.
Hi <username>! You've successfully authenticated, but
GitHub does not provide shell access.
An appropriate greeting might even include more complex dynamic
information, like gitolite's list of repositories the user has access
to. Add support for a ~/git-shell-commands/no-interactive-login
command that generates an arbitrary greeting. When the user tries to
log in:
* If the file ~/git-shell-commands/no-interactive-login exists,
run no-interactive-login to let the server say what it likes,
then hang up.
* Otherwise, if ~/git-shell-commands/ is present, start an
interactive read-eval-print loop.
* Otherwise, print the usual configuration hint and hang up.
Reported-by: Ethan Reesor <firelizzard@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original git-shell(1) manpage emphasized that the shell supports
only git transport commands. As the shell gained features, that
emphasis and focus in the manual has been lost. Bring it back by
splitting the manpage into a few short sections and fleshing out each:
- SYNOPSIS, describing how the shell gets used in practice
- DESCRIPTION, which gives an overview of the purpose and guarantees
provided by this restricted shell
- COMMANDS, listing supported commands and restrictions on the
arguments they accept
- INTERACTIVE USE, describing the interactive mode
Also add a "see also" section with related reading.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
Update the documentation of 'git shell' to mention the interactive
mode and COMMAND_DIR. Also provide a hint when interactive mode is not
available in the shell.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Greg Brockman <gdb@MIT.EDU>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows for example gitosis to allow use of 'git archive --remote' in a
controlled environment.
Signed-off-by: Erik Broes <erikbroes@ripe.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-shell's man page explicitly lists all allowed commands, but 'cvs
server' was missing. Add it.
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
