This fixes the error reported by Michele Ballabio, where gitk will
throw a Tcl error "can't unset prevlines(...)" when displaying a
commit that has a parent commit listed more than once, and the commit
is the first child of that parent.
The problem was basically that we had two variables, prevlines and
lineends, and were relying on the invariant that prevlines($id) was
set iff $id was in the lineends($r) list for some $r. But having
a duplicate parent breaks that invariant since we end up with the
parent listed twice in lineends.
This fixes it by simplifying the logic to use only a single variable,
lineend. It also rearranges things a little so that we don't try to
draw the line for the duplicated parent twice.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes an error reported by Adam Piątyszek: if the current HEAD
is not in the graph that gitk knows about when we do a cherry-pick
using gitk, then gitk hits an error when trying to update its
internal representation of the topology. This avoids the error by
not doing that update if the HEAD before the cherry-pick was a
commit that gitk doesn't know about.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This checks that we have Tcl/Tk 8.4 or later, and puts up an error
message in a window and quits if not.
This was prompted by a patch submitted by Steffen Prohaska, but is
done a bit differently (this uses package require rather than
looking at [info tclversion], and uses show_error to display the
error rather than printing it to stderr).
Signed-off-by: Paul Mackerras <paulus@samba.org>
A file copy would be detected only if the original file was modified in the
same commit. This implies that there will be a patch listed under the
original file name, and we would expect that clicking the original file
name in the file list warps the patch window to that file's patch. (If the
original file was not modified, the copy would not be detected in the first
place, the copied file would be listed as "new file", and this whole matter
would not apply.)
However, if the name of the copy is sorted after the original file's patch,
then the logic introduced by commit d1cb298b0b (which picks up the link
information from the "copy from" line) would overwrite the link
information that is already present for the original file name, which was
parsed earlier. Hence, this patch reverts part of said commit.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
(Väinö Järvelä supplied this patch a while ago for 1.5.2. It no longer
applied cleanly, so I'm reposting it.)
MacBook doesn't seem to recognize MouseRelease-4 and -5 events, at all.
So i added a support for the MouseWheel event, which i limited to Tcl/tk
aqua, as i couldn't test it neither on Linux or Windows. Tcl/tk needs to
be updated from the version that is shipped with OS X 10.4 Tiger, for
this patch to work.
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the user specifies 'diff.color = 1' in their configuration file,
then gitk will not start. Disable colours when calling git log.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When "Show nearby tags" is turned off and the user did a cherry-pick,
we were trying to access variables relating to the descendent/ancestor
tag & head computations in addnewchild though they hadn't been set.
This makes sure we don't do that. Reported by Johannes Sixt.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds an entry to the File menu labelled "List references" which
pops up a window showing a sorted list of branches, tags, and other
references, with a little icon beside each to indicate what sort it
is. The list only shows refs that point to a commit that is included
in the graph, and if you click on a ref, the corresponding commit
is selected in the main window. The list of refs gets updated
dynamically.
Signed-off-by: Paul Mackerras <paulus@samba.org>
If a commit contained a copy operation, the file name was not correctly
determined, and the corresponding part of the patch could not be
navigated to from the list of files.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Paul Mackerras <paulus@samba.org>
My fix in commit b1054ac985 was only
half-right, since it ignored the case where the descendent heads of
the head being removed correspond to two or more different commits.
This fixes it. Reported by Mark Levedahl.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The new 'datetimeformat' configuration variable in ~/.gitk can be set
to a Tcl 'clock format' format string to modify the display of dates
and times.
http://www.tcl.tk/man/tcl8.4/TclCmd/clock.htm has a list of allowed
fields.
Signed-off-by: Arjen Laarhoven <arjen@yaph.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
More lines of context sometimes help to better understand a diff.
This patch introduces a text field above the box displaying the
blobdiffs. You can type in the number of lines of context that
you wish to view. The number of lines of context is saved to
~/.gitk.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
When we had two heads on the same commit, and the user tried to remove
one of them, gitk was sometimes incorrectly saying that the commits
on that branch weren't on any other branch. This fixes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
If "Show nearby tags" is turned off, selecting "Update" from the File
menu will cause a Tcl error. This fixes it. The problem was that
we were calling regetallcommits unconditionally, but it assumed that
getallcommits had been called previously. This also restructures
{re,}getallcommits to be a bit simpler.
Signed-off-by: Paul Mackerras <paulus@samba.org>
In fixing the "can't unset idinlist" error, I moved the setting of
idinlist into the loop that splits the parents into "new" parents
(i.e. those of which this is the first child) and "old" parents.
Unfortunately this is incorrect in the case where we hit the break
statement a few lines further down, since when we come back in,
we'll see idinlist($p) set for some parents that aren't in the list.
This fixes it by moving the loop that sets up newolds and oldolds
further down.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is to help people starting gitk from graphical file managers where
the stderr output is hidden.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
If there is no commit made yet, gitk just dumps a Tcl error on stderr,
which sometimes is hard to see. Noticed when gitk was run from Xfce
file manager (thunar's custom action).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Windows, unlike X-Windows, sends mousewheel events by default to the
window that has keyboard focus and uses the MouseWheel event to do so.
The window to be scrolled must be able to take focus, but gitk's panels
are disabled so cannot take focus. For all these reasons, a different
design is needed to use the mousewheel on Windows. The approach here is
to bind the mousewheel events to the top level window and redirect them
based upon the current mouse position.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
On windows, mouse input follows the keyboard focus, so to allow selecting
text from the patch canvas we must not shift focus back to the top level.
This change has no negative impact on X, so we don't explicitly test
for Win32 on this change. This provides similar selection capability
as already available using X-Windows.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Under some circumstances, having duplicate parents in a commit could
trigger a "can't unset idinlist" Tcl error. This fixes the cause
(the logic in layoutrows could end up putting the same commit into
rowidlist twice) and also puts a catch around the unset to ignore
the error.
Thanks to Jeff King for coming up with a test script to generate a
repo that shows the problem.
Signed-off-by: Paul Mackerras <paulus@samba.org>
At the moment this just has two entries, which allow you to add the file
that you clicked on to the list of filenames to highlight, or replace
the list with the file.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This fixes the problem reported by Brian Downing where searching for
a string that doesn't exist would give a Tcl error. The basic problem
was that we weren't reading the data for the last commit since it
wasn't terminated with a null. This effectively adds a null on the end
(if there isn't one already) to make sure we process the last commit.
This also makes the yellow background behind instances of the search
string appear more consistently, and fixes a bug where the "/" key
would just find the same commit again and again instead of advancing.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When the git log process returned an error immediately, we were
sometimes getting no main window and no error window displayed,
with the gitk process just hanging waiting for something. It appears
that the tkwait in show_error, which waits for the error window to
be destroyed, wasn't sufficient to allow the main window or the error
window to be mapped.
This adds a wait in the main startup code after the main window
has been created to wait until it is visible. This seems to fix the
problem.
Signed-off-by: Paul Mackerras <paulus@samba.org>
git-gui already uses the command key for accelerators, but gitk has
never done so. I'm actually finding it very hard to move back and
forth between the two applications as git-gui is following the Mac
OS X conventions and gitk is not.
This trick is the same one that git-gui uses to determine which
key to bind actions to.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Cygwin's Tcl is configured to honor any occurence of ctrl-z as an
end-of-file marker, while some commits in the git repository and possibly
elsewhere include that character in the commit comment. This causes gitk
ignore commit history following such a comment and incorrect graphs. This
change affects only Windows as Tcl on other platforms already has
eofchar == {}. This fixes problems noted by me and by Ray Lehtiniemi, and
the fix was suggested by Shawn Pierce.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
The magenta was a bit close in color to the normal blue commits. This
makes them green instead as suggested by Linus.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes gitk show up to two fake commits when there are local changes
in the repository; one to represent the state of the index and one to
represent the state of the working directory. The commit representing
the working directory is colored red as before; the commit representing
the index state is colored magenta (as being between red and blue in
some sense).
Signed-off-by: Paul Mackerras <paulus@samba.org>
When I added the "--" case to the code scanning the arguments, I missed
the fact that since the switch statement uses -regexp, the "--" case
will match any argument containing "--", e.g. "--all". This fixes it
by taking out the -regexp (since we don't actually need regular
expression matching) and adjusting the match strings.
A side effect of this is that previously any argument starting with
"-d" would be taken to indicate date mode; now the argument has to be
exactly "-d" if you want date mode.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This makes gitk more consistent with git rev-list and git log in its
handling of arguments that could be either a revision or a filename;
now gitk displays an error message and quits, rather than treating it
as a revision and getting an error in the underlying git log. Now
gitk always passes "--" to git log even if no filenames are being
specified.
It also makes gitk display errors in invoking git log in a window
rather than on stderr, and makes gitk stop looking for a -d flag
when it sees a "--" argument.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This is based on patches from Linus Torvalds and Junio Hamano, so the
ideas here are theirs.
This makes gitk use "git log -z --pretty=raw" instead of "git rev-list"
to generate the list of commits, and also makes it grok the "<" and ">"
markers that git log (and git rev-list) output with the --left-right
flag to indicate which side of a symmetric diff a commit is reachable
from. Left-side commits are drawn with a triangle pointing leftwards
instead of a circle, and right-side commits are drawn with a triangle
pointing rightwards. The commitlisted list is used to store the
left/right information as well as the information about whether each
commit is on the boundary.
Signed-off-by: Paul Mackerras <paulus@samba.org>
In commit 66e46f37de I changed gitk to
store ids in rowrangelist and idrowranges rather than row numbers,
but I missed two places in the layouttail procedure. This resulted
in occasional errors such as the "can't read "commitrow(0,8572)":
no such element in array" error reported by Mark Levedahl. This fixes
it by using the id rather than the row number.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Unroll the prefix stack when assigning treeheights when leaving
proc treeview. Previously, when the ls-tree output ended in
multiple nested directories (for instance in a repository with a
single file "foo/bar/baz"), $treeheight("foo/bar/") was assigned
twice, and $treeheight("foo/") was never assigned. This led to
an error when expanding the "foo" directory in the gitk treeview.
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This was a hangover from before the "Files" and "Pickaxe" parts of
the Find function were moved to the highlight facility in commit
60f7a7dc49. It serves no useful
purpose any more, so this removes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
I missed the case where both nodes have no children and therefore
have no incoming arcs. This fixes it.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This reworks the way that the "Find" button (and the /, ?, ^F, and ^G
keys) works. Previously, pressing the "Find" button would cause gitk
to go off and scan through every commit to see which commits matched,
and the user interface was completely unreponsive during that time.
Now the searching is done in chunks using the scheduler, so the UI
still responds, and the search stops as soon as a matching commit is
found.
The highlighting of matches using a yellow background is now done in
the commit-drawing code and the highlighting code. This ensures that
all the commits that are visible that match are highlighted without
the search code having to find them all.
This also fixes a bug where previously-drawn commits that need to be
highlighted were not being highlighted.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The callback function was incorrectly set to update the background
colorbar when updated the selection background. This did not affect the
colors chosen or their use, just their presentation in the preferences
dialog box.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
The tabstop must be a smallish positive integer, and a spinbox is the
accepted UI control to accomplish this limiting rather than the text
entry box previously used.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Since git reset now gets chatty while resetting, we were getting errors
reported when a reset was done using the "reset branch to here" menu
item. With this we now read the progress messages from git reset and
update a progress bar. Because git reset outputs the progress messages
to standard error, and Tcl treats messages to standard error as error
messages, we have to invoke git reset via a shell and redirect standard
error into standard output.
This also fixes a bug in computing descendent heads when head ids
are changed via a reset.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The main thing here is better parsing of the diff --git lines in the
output of git diff-tree -p. We now cope with filenames in quotes with
special chars escaped. If the filenames contain spaces they aren't
quoted, however, which can create difficulties in parsing. We get
around the difficulties by detecting the case when the filename hasn't
changed (chop the part after "diff --git " in two and see if the halves
match apart from a/ in one and b/ in the other), and if it hasn't
changed, we just use one half. If the filename has changed we wait
for the "rename from" and "rename to" lines, which give the old and
new filenames unambiguously.
This also improves the parsing of the output of git diff-tree.
Instead of using lindex to extract the filename, we take the part from
the first tab on, and if it starts with a quote, we use [lindex $str 0]
to remove the quotes and convert the escapes.
This also gets rid of some unused tagging of the diff text, uses
[string compare] instead of [regexp] in some places, and fixes the
regexp for detecting the @@ hunk-separator lines (the regexp wasn't
accepting a single number, as in "-0,0 +1" for example).
Signed-off-by: Paul Mackerras <paulus@samba.org>
When we compute descendent heads and descendent/ancestor tags, we
cache the results. We need to be careful to invalidate the cache
when we add stuff to the graph. Also make sure that when we cache
descendent heads for a node we only cache the heads that are actually
descendents of that node.
Signed-off-by: Paul Mackerras <paulus@samba.org>
For some unknown reason, changing the scrolling region on the canvases
provokes multiple milliseconds worth of computation in the X server,
and this can end up slowing gitk down significantly. This works around
the problem by limiting the rate at which we update the scrolling region
after the first 100 rows to at most 2 per second.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This adds an entry to the menu that comes up when the user does a
right-click on a row. The new entry allows the user to reset the
currently checked-out head to the commit for the row that they did
the right-click on. The user has to select what type of reset to
do, and confirm the reset, via a dialog box that pops up.
Signed-off-by: Paul Mackerras <paulus@samba.org>
The information in childlist is a duplicate of what's in the children
array, and it wasn't being accessed often enough to be really worth
keeping the list around as well.
Signed-off-by: Paul Mackerras <paulus@samba.org>
We were doing two execs for each tag - one to map the tag ID to a
commit ID and one to read the contents of the tag for later display.
This speeds up the process by not reading the contents of the tag
(instead it is read later if needed), and by using the -d flag to
git show-ref, which gives us refs/tags/foo^{} lines which give us
the commit ID. Also this uses string operations instead of regexps.
Signed-off-by: Paul Mackerras <paulus@samba.org>
If there are local changes in the repository, i.e., git-diff-index HEAD
produces some output, then this optionally displays an extra row in
the graph as a child of the HEAD commit (but with a red circle to
indicate that it's not a real commit). There is a checkbox in the
preferences window to control whether gitk does this or not.
Clicking on the extra row shows the diffs between the working directory
and the HEAD (using git diff-index -p). The right-click menu on the
extra row allows the user to generate a patch containing the local diffs,
or to display the diffs between the working directory and any commit.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This only draws as much of the graph lines as is visible. This can
happen by adding coordinates on to an existing graph line or by
creating a new line. This means that we only need to have laid out
and optimized as much of the graph as is actually visible in order to
draw it, including the lines (previously we didn't draw a graph
line until we had laid out and optimized to the end of a segment of
the line, i.e. down to a down-arrow or to the row where the line's
commit is displayed). This also lets us get rid of the linesegends
list, and gives us an easy workaround for the X server bug that
causes long lines to be misdrawn. This also gets rid of the use
of rowoffsets in drawlineseg et al.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This removes the need for insertrow to go through rowrangelist and
idrowranges and adjust a lot of entries. The first entry for a given
id is now the row number of the first child, not that row number + 1,
and rowranges compensates for that so its callers didn't have to
change. This adds a ranges argument to drawlineseg so that we can
avoid calling rowranges a second time inside drawlineseg (all its
callers already called rowranges).
Signed-off-by: Paul Mackerras <paulus@samba.org>
Neither the "check out this branch" nor the "remove this branch"
menu item can be used on the currently-checked out branch, so disable
them.
Signed-off-by: Paul Mackerras <paulus@samba.org>
In some repositories imported from other systems we can get carriage
return characters in the commit message, which leads to a multi-line
headline being displayed in the summary window, which looks bad.
Also some commit messages start with one or more blank lines, which
leads to an empty headline. This fixes these problems.
Signed-off-by: Paul Mackerras <paulus@samba.org>
This allows us to do compute-intensive processing, such as laying out
the graph, relatively efficiently while also having the GUI be
reasonably responsive. The problem previously was that file events
were serviced before X events, so reading from another process which
supplies data quickly (hi git rev-list :) could mean that X events
didn't get processed for a long time.
With this, gitk finishes laying out the graph slightly sooner and
still responds to the GUI while doing so.
Signed-off-by: Paul Mackerras <paulus@samba.org>
