"git diff(n)" without --base, --ours, etc. defaults to --cc,
which usually is the same as -p unless you are in the middle of
a conflicted merge, just like the shell script version.
"git diff(n) blobA blobB path" complains and dies.
"git diff(n) tree0 tree1 tree2...treeN" does combined diff that
shows a merge of tree1..treeN to result in tree0.
Giving "-c" option to any command that defaults to "--cc" turns
off dense-combined flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This brings another small repacking speedup for sensibly the same pack
size. On the Linux kernel repo, git-repack -a -f is 3.7% faster for a
0.4% larger pack.
Credits to Geert Bosch who brought the Rabin's polynomial idea to my
attention.
This also eliminate the issue of adler32() reading past the data buffer,
as noticed by Johannes Schindelin.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master:
Fix trivial typo in git-log man page.
Properly render asciidoc "callouts" in git man pages.
Fix up remaining man pages that use asciidoc "callouts".
Update the git-branch man page to include the "-r" option,
annotate: display usage information if no filename was given
annotate: fix warning about uninitialized scalar
git-am --resolved: more usable error message.
* fix:
Fix trivial typo in git-log man page.
Properly render asciidoc "callouts" in git man pages.
Fix up remaining man pages that use asciidoc "callouts".
Update the git-branch man page to include the "-r" option,
annotate: display usage information if no filename was given
annotate: fix warning about uninitialized scalar
git-am --resolved: more usable error message.
Adds an xsl fragment to render docbook callouts when
converting to man page format. Update the Makefile
to have "xmlto" use it when generating man pages.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Unfortunately docbook does not allow a callout to be
referenced from inside a callout list description.
Rewrite one paragraph in git-reset man page to work
around this limitation.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
After doing the hard work of hand resolving the conflicts in the
working tree, if the user forgets to run update-index to mark
the paths that have been resolved, the command gave an
unfriendly "fatal: git-write-tree: not able to write tree" error
message. Catch the situation early and give more meaningful
message and suggestion.
Noticed and suggested by Len Brown.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also it learned to do -v (verbose) to report:
- number of loose objects
- disk occupied by loose objects
- number of objects in local packs
- number of loose objects that are also in pack
- unrecognised garbage in .git/objects/??/.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to omit delta base candidates that is much bigger than
the target, but delta size does not grow when we delete more, so
that was not a very good heuristics.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the extra "dryrun" parameter is true, cache_tree_update()
recomputes the invalid entry but does not actually creates
new tree object.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Check internal integrity to report corrupt pack or idx, and
then check cross-integrity between idx and pack.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For now let's retire this and reintroduce it as part of the updated
pack-objects series from Geert when it is ready.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When I split out the builtin commands into their own files, I left the
include of <sys/ioctl.h> in git.c rather than moving it to the file that
needed it (builtin-help.c).
Nobody seems to have noticed, because everything still worked, but because
the TIOCGWINSZ macro was now no longer defined when compiling the
"term_columns()" function, it would no longer automatically notice the
terminal size unless your system used the ancient "COLUMNS" environment
variable approach.
Trivially fixed by just moving the header include to the file that
actually needs it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/cache-tree:
read-tree: teach 1-way merege and plain read to prime cache-tree.
read-tree: teach 1 and 2 way merges about cache-tree.
update-index: when --unresolve, smudge the relevant cache-tree entries.
This teaches read-tree to fully populate valid cache-tree when
reading a tree from scratch, or reading a single tree into an
existing index, reusing only the cached stat information (i.e.
one-way merge). We have already taught update-index about cache-tree,
so "git checkout" followed by updates to a few path followed by
a "git commit" would become very efficient.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This teaches one-way and two-way "read-tree -m" (and its special
form, "read-tree --reset" as well) not to discard cache-tree but
invalidate only the changed parts of the tree. When switching
between related branches, this helps the eventual commit
(i.e. write-tree) by keeping cache-tree valid as much as
possible.
This does not prime cache-tree yet, but we ought to be able to
do that for no-merge (i.e. reading from a tree object) case and,
and also perhaps 1 way merge case.
With this patch applied, switching between the tip of Linux 2.6
kernel tree and a branch that touches one path (fs/ext3/Makefile)
from it invalidates only 3 paths out of 1201 cache-tree entries
in the index, and subsequent write-tree takes about a half as
much time as before.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch allows for computing the delta index for each base object
only once and reuse it when trying to find the best delta match.
This should set the mark and pave the way for possibly better delta
generator algorithms.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master:
t0000-basic: more commit-tree tests.
commit-tree.c: check_valid() microoptimization.
Fix filename verification when in a subdirectory
rebase: typofix.
socksetup: don't return on set_reuse_addr() error
* nh/fetch-http:
git-fetch: resolve remote symrefs for HTTP transport
commit-tree.c: check_valid() microoptimization.
Fix filename verification when in a subdirectory
rebase: typofix.
socksetup: don't return on set_reuse_addr() error
git-fetch validates that a remote ref resolves to a SHA1 prior to calling
git-http-fetch. This adds support for resolving a few levels of symrefs
to get to the SHA1.
Signed-off-by: Nick Hengeveld <nickh@reactrix.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git rebase [--onto <newbase>] <upstream> [<branch>]
git rebase --continue
git rebase --abort
Add "--continue" to restart the rebase process after
manually resolving conflicts. The user is warned if
there are still differences between the index and the
working files.
Add "--abort" to restore the original branch, and
remove the .dotest working files.
Some minor additions to the git-rebase documentation.
[jc: fix that applies to the maintenance track has been dealt
with separately.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you don't have a "--" marker, then:
- all of the arguments we are going to assume are pathspecs
must exist in the working tree.
- none of the arguments we parsed as revisions could be
interpreted as a filename.
so that there really isn't any possibility of confusion in case
somebody does have a revision that looks like a pathname too.
The former rule has been in effect; this implements the latter.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fix:
commit-tree.c: check_valid() microoptimization.
Fix filename verification when in a subdirectory
rebase: typofix.
socksetup: don't return on set_reuse_addr() error
There is no point reading the whole object just to make sure it exists and
it is of the expected type. We added sha1_object_info() for such need
after this code was written, so use it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we are in a subdirectory of a git archive, we need to take the prefix
of that subdirectory into accoung when we verify filename arguments.
Noted by Matthias Lederhofer
This also uses the improved error reporting for all the other git commands
that use the revision parsing interfaces, not just git-rev-parse. Also, it
makes the error reporting for mixed filenames and argument flags clearer
(you cannot put flags after the start of the pathname list).
[jc: with fix to a trivial typo noticed by Timo Hirvonen]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
