* cc/bisect:
Bisect reset: do nothing when not bisecting.
Bisect: use "$GIT_DIR/BISECT_NAMES" to check if we are bisecting.
Bisect visualize: use "for-each-ref" to list all good refs.
git-bisect: modernize branch shuffling hack
git-bisect: use update-ref to mark good/bad commits
git-bisect: war on "sed"
Bisect reset: remove bisect refs that may have been packed.
Before this patch, using "git bisect reset" when not bisecting
did a "git checkout master" for no good reason.
This also happened using "git bisect replay" when not bisecting
because "bisect_replay" starts by calling "bisect_reset".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously we tested if the "$GIT_DIR/refs/bisect" directory
existed, to check if we were bisecting.
Now with packed refs, it is simpler to check if the file
"$GIT_DIR/BISECT_NAMES" exists, as it is already created when
starting bisection and removed when reseting bisection.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ph/parseopt-sh:
git-quiltimport.sh fix --patches handling
git-am: -i does not take a string parameter.
sh-setup: don't let eval output to be shell-expanded.
git-sh-setup: fix parseopt `eval` string underquoting
Give git-am back the ability to add Signed-off-by lines.
git-rev-parse --parseopt
scripts: Add placeholders for OPTIONS_SPEC
Migrate git-repack.sh to use git-rev-parse --parseopt
Migrate git-quiltimport.sh to use git-rev-parse --parseopt
Migrate git-checkout.sh to use git-rev-parse --parseopt --keep-dashdash
Migrate git-instaweb.sh to use git-rev-parse --parseopt
Migrate git-merge.sh to use git-rev-parse --parseopt
Migrate git-am.sh to use git-rev-parse --parseopt
Migrate git-clone to use git-rev-parse --parseopt
Migrate git-clean.sh to use git-rev-parse --parseopt.
Update git-sh-setup(1) to allow transparent use of git-rev-parse --parseopt
Add a parseopt mode to git-rev-parse to bring parse-options to shell scripts.
In bisect_visualize, "cd $GIT_DIR/refs && echo bisect/good-*" was
still used instead of "git for-each-ref". This patch fix it.
We now pass "refs/bisect/bad" and "--not refs/bisect/good-<rev>"
instead of "bisect/bad" and "--not bisect/good-<rev>" to gitk,
but it seems to work.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When switching to a new rev, we first made "new-bisect" branch to
point at the chosen commit, attempt to switch to it, and then
finally renamed the new-bisect branch to bisect by hand when
successful. This is so that we can catch checkout failure (your
local modification may interfere with switching to the chosen
version) without losing information on which commit the next
attempt should be made.
Rewrite it using a more modern form but without breaking the
safety.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This removes the last instance of making a ref by hand with
"echo SHA1 >.git/refs/$refname" from the script and replaces it
with update-ref.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not need to pipe "echo" to "sed" only to strip refs/heads/
from the beginning. We are assuming not-so-ancient shells these
days.
Also there is no need to avoid assuming \012 is the LF; we do
not run on EBCDIC, sorry. Other parts of the script already
uses tr to convert separator to LF that way.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If refs were ever packed in the middle of bisection, the bisect
refs were not removed from the "packed-refs" file.
This patch fixes this problem by using "git update-ref -d $ref $hash"
in "bisect_clean_state".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
\n is not portable in a s/// replacement string, only
in the regex part. backslash-newline helps.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
--text follows this line--
These commands currently lack OPTIONS_SPEC; allow people to
easily list with "git grep 'OPTIONS_SPEC=$'" what they can help
improving.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is incompatible with previous versions because an exit code
of 125 used to mark current commit as "bad". But hopefully this exit
code is not much used by test scripts or other programs. (126 and 127
are used by POSIX compliant shells to mean "found but not
executable" and "command not found", respectively.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also use "die" instead of "echo >&2 something ; exit 1".
And simplify "bisect_replay".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are some "skip"ped revisions, we add the '--bisect-all'
option to "git rev-list --bisect-vars". Then we filter out the
"skip"ped revisions from the result of the rev-list command, and we
modify the "bisect_rev" var accordingly.
We don't always use "--bisect-all" because it is slower
than "--bisect-vars" or "--bisect".
When we cannot find for sure the first bad commit because of
"skip"ped commits, we print the hash of each possible first bad
commit and then we exit with code 2.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This allows you to say:
git bisect start
git bisect bad $bad
git bisect next
to start bisection without knowing a good commit. This would
have you try a commit that is half-way since the beginning of
the history, which is rather wasteful if you already know a good
commit, but if you don't (or your history is short enough that
you do not care), there is no reason not to allow this.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This slightly modernizes the bisect script to use show-ref/for-each-ref
instead of looking into $GIT_DIR/refs files directly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
One bad commit is fundamentally needed for bisect to run,
and if we beforehand know more good commits, we can narrow
the bisect space down without doing the whole tree checkout
every time we give good commits.
This patch implements:
git bisect start [<bad> [<good>...]] [--] [<pathspec>...]
as a short-hand for this command sequence:
git bisect start
git bisect bad $bad
git bisect good $good1 $good2...
On the other hand, there may be some confusion between revs
(<bad> and <good>...) and <pathspec>... if -- is not used
and if an invalid rev or a pathspec that looks like a rev is
given.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
So we can remove the specific message in "bisect_run".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We may be able to "run" with only one good revision given
and then verify that the result of the first run is bad.
And perhaps also the other way around.
But for now let's check that we have at least one bad and
one good revision before we start to run.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The branch you are on while bisecting is always "bisect", and
checking for "refs/heads/bisect*" is wrong. Only check if it is
exactly "refs/heads/bisect".
Signed-off-by: Junio C Hamano <junkio@cox.net>
This idea was suggested by Bill Lear
(Message-ID: <17920.38942.364466.642979@lisa.zopyra.com>)
and I think it is a very good one.
This patch adds a new test file for "git bisect run", but there
is currently only one basic test.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without this the rev could be (e.g.) a tag and then the condition to end the
bisect might fail and you have to check the already known to be bad revision
once more.
Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Converts one use of git-checkout in git-bisect not to say "switching
to branch". It looks like all the other cases it is friendlier to
give notice to the end user.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I had local modifications in the tree and doing bisect reset required me to
manually edit .git/HEAD.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some GIT's shell script are using bare 'perl' for perl invocation.
Use @@PERL@@ symbol and replace it with PERL_PATH_SQ everywhere.
Signed-off-by: Michal Rokos <michal.rokos@nextsoft.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I noticed that we forgot to clean this file and kept it that
way, while trying to help with Andrew's bisect problem.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-bisect reset without an argument would return to master even
if the bisecting started at a non-master branch. This patch makes
it save the original branch name to .git/head-name and restore it
afterwards.
This is also compatible with Cogito and cg-seek, so cg-status will
show that we are seeked on the bisect branch and cg-reset will
properly restore the original branch.
git-bisect start will refuse to work if it is not on a bisect but
.git/head-name exists; this is to protect against conflicts with
other seeking tools.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There were some problems with the usage message clean-up patch
series. I hadn't realised that subdirectory aware scripts can't source
git-sh-setup. I propose that we change this and let the scripts which
are subdirectory aware set a variable, SUBDIRECTORY_OK, before they
source git-sh-setup.
The scripts will also set USAGE and possibly LONG_USAGE before they
source git-sh-setup. If LONG_USAGE isn't set it defaults to USAGE.
If we go this way it's easy to catch --help in git-sh-setup, print the
(long) usage message to stdout and exit cleanly. git-sh-setup can
define a 'usage' shell function which can be called by the scripts to
print the short usage string to stderr and exit non-cleanly. It will
also be easy to change $0 to basename $0 or something else, if would
like to do that sometime in the future.
What follows is a patch to convert a couple of the commands to this
style. If it's ok with everyone to do it this way I will convert the
rest of the scripts too.
[jc: thrown in to proposed updates queue for comments.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
On AIX, there is no -n option to the system's echo. Instead,
it needs the '\c' control character. We could replace
echo -n "foo"
with
echo -e "foo\c"
but printf is recommended by most man pages. Tested on AIX
5.3, Solaris 8, and Debian.
[jc: futureproofed two instances that uses variable with '%s'
so later feeding different messages would not break things too
easily; others are emitting literal so whoever changes the
literal ought to notice more easily so they are safe.]
Signed-off-by: E. Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was surprisingly easy to do.
git bisect start <pathspec>
followed by all the normal "git bisect good/bad" stuff.
Almost totally untested, and I guarantee that if your pathnames have
spaces in them (or your GIT_DIR has spaces in it) this won't work. I don't
know how to fix that, my shell programming isn't good enough.
This involves small changes to make "git-rev-list --bisect" work in the
presense of a pathspec limiter, and then truly trivial (and that's the
broken part) changes to make "git bisect" save away and use the pathspec.
I tried one bisection, and a "git bisect visualize", and it all looked
correct. But hey, don't be surprised if it has problems.
Linus
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now all the users of this script detect its exit status and die,
complaining that it is outside git repository. So move the code
that dies from all callers to git-sh-setup script.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the counterpart of git-update-ref that lets you read
and create "symbolic refs". By default it uses a symbolic link
to represent ".git/HEAD -> refs/heads/master", but it can be compiled
to use the textfile symbolic ref.
The places that did 'readlink .git/HEAD' and 'ln -s refs/heads/blah
.git/HEAD' have been converted to use new git-symbolic-ref command, so
that they can deal with either implementation.
Signed-off-by: Junio C Hamano <junio@twinsun.com>
As a convenience measure, 'bisect bad' or 'bisect good' automatically
does 'bisect next' when it knows it can, but the result of that test
to see if it can was leaking through as the exit code from the whole
thing, which was bad. Noticed by Anton Blanchard.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'git bisect' command was very unforgiving in that once you made a
mistake telling it good/bad it was very hard to take it back. Keep a
log of what you told it in an earlier session, so that it can be
replayed after removing everything after what you botched last time.
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
