This fixes a crash in broken repositories where random commits
suddenly disappear.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Check if a line of the header has enough characters to possibly
contain the requested prefix.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When you do this, existing "blame -C -C" would not find that the
latter half of the file2 came from the existing file1:
... both file1 and file2 are tracked ...
$ cat file1 >>file2
$ git add file1 file2
$ git commit
This is because we avoid the expensive find-copies-harder code
that makes unchanged file (in this case, file1) as a candidate
for copy & paste source when annotating an existing file
(file2). The third -C now allows it. However, this obviously
makes the process very expensive. We've actually seen this
patch before, but I dismissed it because it covers such a narrow
(and arguably stupid) corner case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The -C option to blame tries to find a section of a preimage
file by running diff against the lines whose origin is still
unknown, and excluding the different parts. The code however
did not cover the case where the tail part of the section
matched, which we handle for the normal non-move/copy codepath.
This breakage was most visible when preimage file matches in its
entirety and failed to pass blame in such a case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git log --boundary" incorrectly honoured the option only when
"left-right" was enabled.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add description of raw combined diff format to diff-formats.txt,
as "diff format for merges" section, before "Generating patches..."
section.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most other documentation will frequently be read from an installation
of git so will naturally be associated with the installed version.
But these two documents in particular are often read from web pages
while users are still exploring git. It's important to mention
version 1.5.1 since these documents provide example commands that
won't work with previous versions of git.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-svn dcommit exports commits to Subversion, then imports them back
to git again, and last but not least rebases or resets HEAD to the
last of the new commits. I guess this rebasing is convenient when
using just git, but when the commits to be exported are managed by
StGIT, it's really annoying. So add an option to disable this
behavior. And document it, too!
Signed-off-by: Karl Hasselström <kha@treskal.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some of the existing markup was just plain broken, and some subcommand
options weren't indented properly.
Signed-off-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the -v is passed, git-tag will exit after it is processed like it
does with the -d and -l options. Additionally, missing code block caused
wrong rendering of an option example.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is actually a few different changes to request-pull,
making it slightly smarter:
1) Minor cleanup of revision->base variable names, making it
follow the head/headrev naming convention that is already
in use.
2) Compute the merge-base between the two revisions upfront
and reuse that selected merge-base to create the diffstat.
3) Refuse to generate a pull request for branches that have no
existing relationship. These aren't very common and would mess
up our diffstat generation.
4) Disable the PAGER when running shortlog and diff, as these
would otherwise activate the pager for each command when
git-request-pull is run on a tty. Instead users can get the
entire output paged (if desired) using `git -p request-pull`.
5) Use shortlog rather than `git log | git shortlog` now that
recent shortlog versions are able to run the revision listing
internally.
6) Attempt to resolve the input URL using the user's configured
remotes. This is useful if the URL you want the recipient to
see is also the one you used to push your changes. If not a
config-file remote could easily be setup for the public URL
and request-pull could be passed that name instead.
7) Automatically guess and include the remote branch name in the
body of the message. We list the branch name immediately after
the URL, making it easy for the recipient to copy and paste
the entire line onto a `git pull` command line. Rumor has it
Linus likes this format, for exactly that reason.
If multiple branches at the remote match $headrev we take the
first one returned by peek-remote and assume it is suitable.
If no branches are available we warn the user about the problem,
but insert a static string that is not a valid branch name
and would be obvious to anyone reading the message as being
totally incorrect. This allows users to still generate a
template message without network access (for example) and
hand-correct the bits that cannot be verified.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
gitweb: use decode_utf8 directly
posix compatibility for t4200
Document 'opendiff' value in config.txt and git-mergetool.txt
Allow PERL_PATH="/usr/bin/env perl"
Make xstrndup common
diff.c: fix "size cache" handling.
http-fetch: Disable use of curl multi support for libcurl < 7.16.
Using decode() tries to decode data that is already UTF-8 and
borks, but decode_utf8 from Encode.pm has a built-in safety
against that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Fix t4200 so that it also works on OS X by not relying on gnu
extensions to sed.
Signed-off-by: Bryan Larsen <bryan@larsen.st>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There is a mechanism PERL_PATH in the Makefile to specify path to
Perl binary, but sometimes it is convenient to let 'env' figure
out where Perl comes from, with PERL_PATH="/usr/bin/env perl".
Allowing this would make things easier to MacPorts, where we wish
to work with the MacPorts perl if it is installed, but fall back
to the system perl if it isn't.
Signed-off-by: Bryan Larsen <bryan@larsen.st>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This also improves the implementation to match how strndup is
specified (by GNU): if the length given is longer than the string,
only the string's length is allocated and copied, but the string need
not be null-terminated if it is at least as long as the given length.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We broke the size-cache handling when we changed the function
signature of sha1_object_info() in 21666f1a. We obviously
wanted to cache the size we obtained when sha1_object_info()
succeeded, not when it failed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
curl_multi_remove_handle() is broken in libcurl < 7.16, in that it
doesn't correctly update the active handles count when a request is
aborted. This causes the transfer to hang forever waiting for the
handle count to become less than the number of active requests.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There really isn't any point in turning off .mailmap. The
number of mailmap lookups are bounded by number of lines in the
target file, and the real blame processing is much more
expensive. If it turns out to be too costly, we should optimize
the mailmap lookup itself, instead of avoiding the call.
If the author information of commits of the project are
relatively clean, .mailmap would have only small number of
entries, and the overhead of looking it up will not be high. On
the other hand, if the author information is really screwed up
that a good .mailmap needs to be maintained to run shortlog,
giving uncleaned names in blame output is not helpful at all
either.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We can't unconditionally assign revision 1.1 to
newly added files. In case the file did exist in the
past and was deleted we need to honor the old
revision number.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For example Mac OS X lacks the seq command. So we cannot use it
there. A good old while loop works just as good.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that fast-import is using a "library function" to handle
correcting its packfile's object count and trailing SHA-1 we
should reuse the same function in index-pack, to reduce the
size of the code we must maintain.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Include a generalized fixup_pack_header_footer() in this new file.
Needed by git-repack --max-pack-size feature in a later patchset.
[sp: Moved close(pack_fd) to callers, to support index-pack, and
changed name to better indicate it is for packfiles.]
Signed-off-by: Dana L. How <danahow@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This extension allows GNU tar to process file names in excess of the 100
characters defined by the original tar standard. It does this by faking a
file, named '././@LongLink' containing the true file name, and then adding
the file with a truncated name. The idea is that tar without this
extension will write out a file with the long file name, and write the
contents into a file with truncated name.
Unfortunately, GNU tar does a lousy job at times. When truncating results
in a _directory_ name, it will happily use _that_ as a truncated name for
the file.
An example where this actually happens is gcc-4.1.2, where the full path
of the file WeThrowThisExceptionHelper.java truncates _exactly_ before the
basename. So, we have to support that ad-hoc extension.
This bug was noticed by Chris Riddoch on IRC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Like core-Git we now track the values that we embed into our shell
script wrapper, and we "recompile" that wrapper if they are changed.
This concept was lifted from git.git's Makefile, where a similar
thing was done by Eygene Ryabinkin. Too bad it wasn't just done
here in git-gui from the beginning, as the git.git Makefile support
for GIT-GUI-VARS was really just because git-gui doesn't do it on
its own.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Whenever we want to execute a git subcommand from the plumbing
layer (and on rare occasion, the more porcelain-ish layer) we
tend to use our proc wrapper, just to make the code slightly
cleaner at the call sites. I wasn't doing that in a couple of
places, so this is a simple cleanup to correct that.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Rather than passing "-font font_ui" to every widget that we
create we can instead reconfigure the option database for
all widget classes to use our font_ui as the default widget
font. This way Tk will automatically setup their defaults
for us, and we can reduce the size of the application.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
An earlier change tossed these optionMenu font configurations
all over the code, when really we can just rename the proc to
a hidden internal name and provide our own wrapper to install
the font configuration we really want.
We also don't need to set these option database entries in all
of the procedures that open dialogs; instead we should just set
one time, them after we have the font configuration ready for use.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since Tk automatically wraps lines for us in tk_messageBox
widgets we don't need to try to wrap them ourselves. Its
actually worse that we linewrapped this here in the script,
as not all fonts will render this dialog nicely.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A coworker who was new to git-gui recently tried to make an octopus
merge when he did not quite mean to. Unfortunately in his case the
branches had file level conflicts and failed to merge with the octopus
strategy, and he didn't quite know why this happened. Since most users
really don't want to perform an octopus merge this additional safety
valve in front of the merge process is a good thing.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that the command line git-commit has made displaying
the subject (first line) of the newly created commit popular
we can easily do the same thing here in git-gui, without the
ugly part of forking off a child process to obtain that first
line.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the path of our wish executable that are running under
contains spaces we need to make sure they are escaped in
a proper Tcl list, otherwise we are unable to start gitk.
Reported by Randal L. Schwartz on #git.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The code used write_in_full() without pulling its declarations from the
header file. When header is included, usage[] collides with usage()
function.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
read_mailmap already returns not 0 in case of error, and nothing
seem to be interested in it. It also is silent about the fact
(read_mailmap being to chatty would justify the call to access,
but there is no point for it to be and it isn't).
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only such a caller builtin-blame.c would pass NULL as the place
where to store the abbreviation.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
strncpy does not NUL-terminate output in case of output buffer too short,
and map_email prototype (and usage) does not allow for figuring out
what the length of the name is.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It can be either hostname/address, or a full path to a
local executable.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Separate things to be checked when making commits, and things
to be checked when sending patches.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
