The only difference between patch and patches view is in the treatement
of single commits: the former only displays a single patch, whereas the
latter displays a patchset leading to the specified commit.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since we are going to introduce an additional parameter for
git_commitdiff to tune patch view, we switch to named/hash-based
parameter passing for clarity and robustness.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The output of commitdiff_plain is not intended for git-am:
* when given a range of commits, commitdiff_plain publishes a single
patch with the message from the first commit, instead of a patchset
* the hand-built email format replicates the commit summary both as
email subject and as first line of the email itself, resulting in
a duplication if the output is used with git-am.
We thus create a new view that can be fed to git-am directly, allowing
patch exchange via gitweb. The new view exposes the output of git
format-patch directly, limiting it to a single patch in the case of a
single commit.
A configurable upper limit defaulting to 16 is imposed on the number of
commits which will be included in a patchset, to prevent DoS attacks on
the server. Setting the limit to 0 will disable the patch view, setting
it to a negative number will remove the limit.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/am-options:
git-am: rename apply_opt_extra file to apply-opt
Test that git-am does not lose -C/-p/--whitespace options
git-am: propagate --3way options as well
git-am: propagate -C<n>, -p<n> options as well
git-am --whitespace: do not lose the command line option
All other state files use dash in their names, not underscores.
Also, there is no reason to call this "extra". Drop it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These tests make sure that "git am" does not lose command line options
specified when it was started, after it is interrupted by a patch that
does not apply earlier in the series.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reasoning is the same as the previous patch, where we made -C<n>
and -p<n> propagate across a failure.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options are meant to deal with patches that do not apply cleanly
due to the differences between the version the patch was based on and
the version "git am" is working on.
Because a series of patches applied in the same "git am" run tends to
come from the same source, it is more useful to propagate these options
after the application stops.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you start "git am --whitespace=fix" and the patch application process
is interrupted by an unapplicable patch early in the series, after
fixing the offending patch, the remainder of the patch should be processed
still with --whitespace=fix when restarted with "git am --resolved" (or
dropping the offending patch with "git am --skip").
The breakage was introduced by the commit 67dad68 (add -C[NUM] to git-am,
2007-02-08); this should fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running:
p4 where //depot/SomePath/...
The result can in some situations look like:
//depot/SomePath/... //client/SomePath/... /home/user/p4root/SomePath/...
-//depot/SomePath/UndesiredSubdir/... //client/SomePath/UndesiredSubdir/... /home/user/p4root/SomePath/UndesiredSubdir/...
This depends on the users Client view. The current p4Where method will now
return /home/user/p4root/SomePath/UndesiredSubdir/... which is not what we
want. This patch loops through the results from "p4 where", and picks the one
where the depotFile exactly matches the given depotPath (//depot/SomePath/...
in this example).
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that full filesystem conditions or permissions problems won't go
unnoticed.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a generated builtin since 24b1f65f (Install git-stage in
exec-path).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'branch' subcommand incorrectly had the svn-remote to use hardcoded
as 'svn', the default remote name. This meant that branches derived
from other svn-remotes would try to use the branch and tag configuration
for the 'svn' remote, potentially copying would-be branches to the wrong
place in SVN, into the branch namespace for another project.
Fix this by using the remote name extracted from the svn info for the
specified git ref. Add a testcase for this behaviour.
[jc: squashed in a fix to test from Michael J Gruber for older svn (1.4)]
Signed-off-by: Deskin Miller <deskinm@umich.edu>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/rm-i-t-a:
git add --intent-to-add: do not let an empty blob be committed by accident
git add --intent-to-add: fix removal of cached emptiness
builtin-rm.c: explain and clarify the "local change" logic
Extend index to save more flags
Earlier the plan was to eventually eradicate git-foo executables from the
filesystem for all the built-in commands, but when we released 1.6.0 we
decided not to do so. Instead, it has been promised that by prepending
the output from $(git --exec-path) to your $PATH, you can keep using the
dashed form of commands.
This also allows "git stage" to appear in the autogenerated command list,
which is used to offer man pages by "git help" command.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In a corner case of large files whose lines do not match uniquely, the
loop to eliminate a line that matches multiple locations adjacent to a run
of lines that do not uniquely match wasted too much cycles. Fix this by
giving up early after scanning 100 lines in both direction.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* bc/maint-keep-pack:
repack: only unpack-unreachable if we are deleting redundant packs
t7700: test that 'repack -a' packs alternate packed objects
pack-objects: extend --local to mean ignore non-local loose objects too
sha1_file.c: split has_loose_object() into local and non-local counterparts
t7700: demonstrate mishandling of loose objects in an alternate ODB
builtin-gc.c: use new pack_keep bitfield to detect .keep file existence
repack: do not fall back to incremental repacking with [-a|-A]
repack: don't repack local objects in packs with .keep file
pack-objects: new option --honor-pack-keep
packed_git: convert pack_local flag into a bitfield and add pack_keep
t7700: demonstrate mishandling of objects in packs with a .keep file
Use new insert_file() subroutine to insert HTML chunks from external
files: $site_header, $home_text (by default indextext.html),
$site_footer, and $projectroot/$project/REAME.html.
All non-ASCII chars of those files will be broken by Perl IO layer
without decoding to utf8, so insert_file() does to_utf8() on each
printed line; alternate solution would be to open those files with
"binmode $fh, ':utf8'", or even all files with "use open qw(:std :utf8)".
Note that inserting README.html lost one of checks for simplicity.
Noticed-by: Tatsuki Sugiura <sugi@nemui.org>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Don't redirect stderr to /dev/null, use -q to suppress the output on
stderr.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are printfs around that do not grok '\1', but need '\01'.
Discovered on AIX 4.3.x.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This comes from conversation at the GitTogether where we thought it would
be helpful to be able to teach people to 'stage' files because it tends
to cause confusion when told that they have to keep 'add'ing them.
This continues the movement to start referring to the index as a
staging area (eg: the --staged alias to 'git diff'). Also adds a
doc file for 'git stage' that basically points to the docs for
'git add'.
Signed-off-by: Scott Chacon <schacon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We remove crud characters at the beginning and end of real-names so that
when we see email addresses like
From: "David S. Miller" <davem@davemloft.net>
we drop the quotes around the name when we parse that and split it up into
name and email.
However, the list of crud characters was basically just a random list of
common things that are found around names, and it didn't contain the
backslash character that some insane scripts seem to use when quoting
things. So now the kernel has a number of authors listed like
Author: \"Rafael J. Wysocki\ <rjw@sisk.pl>
because the author name had started out as
From: \"Rafael J. Wysocki\" <rjw@sisk.pl>
and the only "crud" character we noticed and removed was the final
double-quote at the end.
We should probably do better quote removal from names anyway, but this is
the minimal obvious patch.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This introduces make variable NO_PTHREADS for platforms that lack the
support for pthreads library or people who do not want to use it for
whatever reason. When defined, it makes the multi-threaded index
preloading into a no-op, and also disables threaded delta searching by
pack-objects.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Tested-by: Johannes Sixt <j6t@kdbg.org> (AIX 4.3.x)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch that allows "git bisect skip" to be passed a range of
commits using the "<commit1>..<commit2>" notation is flawed because
it introduces a regression when it was passed a simple rev or commit.
"git bisect skip <commit>" doesn't work any more, because <commit>
is quoted but not properly unquoted.
This patch fixes that and add tests cases to better check when it is
passed commits and range of commits.
While at it, this patch also properly quotes the non range arguments
using the "sq" function.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
This is taken from a patch from Giuseppe but unfortunately it came
too late to replace the series that was already on "next". The comment
he updated here is better than the version we had previously, so I am
cherry-picking this bit not to lose it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gb/gitweb-feature:
gitweb: make gitweb_check_feature a boolean wrapper
gitweb: rename gitweb_check_feature to gitweb_get_feature
gitweb: fix 'ctags' feature check and others
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Add a menu option to start git gui
gitk: Make line origin search update the busy status
gitk: Update German translation
gitk: Fix bug in accessing undefined "notflag" variable
gitk: Highlight only when search type is "containing:".
gitk: Fix context menu items for generating diffs when in tree mode
When the destination repository is a mirror, this function goofed by still
passing a refspec to git-push. Now it notices that the remote is a mirror
and holds the refspec.
Signed-off-by: Mark Burton <markb@ordern.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Git gui already has menu commands to start gitk, and this makes the
relation symmetric.
[paulus@samba.org - changed "Git Gui" in the menu item to "git gui"]
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Currently the 'show origin of this line' feature does not update the
status field of the gitk window, so it is not evident that any
processing is going on. It may seem at first that clicking the item
had no effect.
This commit adds calls to set and clear the busy status with an
appropriate title, similar to other search commands.
Signed-off-by: Alexander Gavrilov <angavrilov@gmail.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
This takes into account the most recent po file merge.
Signed-off-by: Christian Stimming <stimming@tuhh.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>
As pointed out by Johannes Sixt and Alexander Gavrilov, commit
2958228430 ("gitk: Fix switch statement
in parseviewargs") exposed a latent bug in that $notflag was never
initialized. Since it isn't used either, this removes it entirely.
Signed-off-by: Paul Mackerras <paulus@samba.org>
When the search type is "touching paths" or "adding/removing string",
it's not very useful to highlight instances of the search string in
the commit message, headline or author name, so this disables the
highlighting in those cases.
This was suggested by Mark Burton <markb@ordern.com>, but the
implementation is different to his patch, which tested $gdttype at
each place where $markingmatches was tested.
Signed-off-by: Paul Mackerras <paulus@samba.org>
