This is main test case for the original problem that triggered this
patch series. We create a repo with 50k tags and then test whether
git-clone over the smart HTTP protocol succeeds.
Note that we construct the repo in a slightly different way than the
original script used to reproduce the problem. This is because the
original script just created 50k tags all pointing to the same commit,
so if there was a bug where remote-curl.c was not passing all the refs
to fetch-pack we wouldn't know. The clone would succeed even if only one
tag was passed, because all the other tags were pointing at the same SHA
and would be considered present.
Instead we create a repo with 50k independent (dangling) commits and
then tag each of those commits with a unique tag. This way if one of the
tags is not given to fetch-pack, later stages of the clone would
complain about it.
This allows us to test both that the command line overflow was fixed, as
well as that it was fixed in a way that doesn't leave out any of the
refs.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These test cases focus only on testing the parsing of refs on stdin,
without bothering with the rest of the fetch-pack machinery. We pass in
the refs using different combinations of command line and stdin and then
we watch fetch-pack's stdout to see whether it prints all the refs we
specified (but we ignore their order).
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we can throw an arbitrary number of refs at fetch-pack using
its --stdin option, we use it in the remote-curl helper to bypass the
OS command line length limit.
Signed-off-by: Ivan Todoroski <grnch@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The syntax for the use of mark references in fast-import
demands either a SP (space) or LF (end-of-line) after
a mark reference. Fast-import does not complain when garbage
appears after a mark reference in some cases.
Factor out parsing of mark references and complain if
errant characters are found. Also be a little more careful
when parsing "inline" and SHA1s, complaining if extra
characters appear or if the form of the dataref is unrecognized.
Buggy input can cause fast-import to produce the wrong output,
silently, without error. This makes it difficult to track
down buggy generators of fast-import streams. An example is
seen in the last line of this commit command:
commit refs/heads/S2
committer Name <name@example.com> 1112912893 -0400
data <<COMMIT
commit message
COMMIT
from :1M 100644 :103 hello.c
It is missing a newline and should be:
[...]
from :1
M 100644 :103 hello.c
What fast-import does is to produce a commit with the same
contents for hello.c as in refs/heads/S2^. What the buggy
program was expecting was the contents of blob :103. While
the resulting commit graph looked correct, the contents in
some commits were wrong.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check if we even have a parameter before checking its value. Running
this command without any arguments may not make a lot of sense, but
reacting with a segmentation fault is unduly harsh.
While we're at it, avoid casting argv by declaring it const right away.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add void to make it match its definition in submodule.c.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print out a trailing newline when --show-prefix is run with cwd
at the top level of the tree which results in an empty prefix.
Behavior is now like --show-cdup.
Fixes an expected failure in t1501.
Signed-off-by: Ross Lagerwall <rosslagerwall@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HTTP authentication is currently handled by get_refs and fetch_ref, but
not by fetch_object, fetch_pack or fetch_alternates. In the
single-threaded case, this is not an issue, since get_refs is always
called first. It recognigzes the 401 and prompts the user for
credentials, which will then be used subsequently.
If the curl multi interface is used, however, only the multi handle used
by get_refs will have credentials configured. Requests made by other
handles fail with an authentication error.
Fix this by setting CURLOPT_USERPWD whenever a slot is requested.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Create a repo with multiple loose objects in order to demonstrate http
authentication breakage.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a Makefile to run subtree tests. This is largely copied
from the standard test suite with irrelevant targets removed
and some paths altered to account for where subtree tests live.
Signed-off-by: David A. Greene <greened@obbligato.org>
Build git-subtree in its contrib directory and install from there.
The main Makefile no longer discovers subcommands build in the main
build area so we cannot count on it to install git-subtree. The user
should make && make install in contrib/subtree to install git-subtree.
Change the rule to install the git-subtree manpage. The main
Documentation area doesn't directly support installing documentation
from other directories so the user will have to do that from within
contrib/subtree for now.
Signed-off-by: David A. Greene <greened@obbligato.org>
Include config.make.autogen in the git-subtree contrib area to pick up
settings for prefix and other such things.
Signed-off-by: David A. Greene <greened@obbligato.org>
Remove various files that simply duplicate functionality already
provided by the main project files.
Signed-off-by: David A. Greene <greened@obbligato.org>
Set TEST_DIRECTORY to the main git test area. This allows the
git-subtree out-of-tree tests to run correctly.
Signed-off-by: David A. Greene <greened@obbligato.org>
Redo the hashing loop in xdl_hash_record in a way that loads an entire
'long' at a time, using masking tricks to see when and where we found
the terminating '\n'.
I stole inspiration and code from the posts by Linus Torvalds around
https://lkml.org/lkml/2012/3/2/452https://lkml.org/lkml/2012/3/5/6
His method reads the buffers in sizeof(long) increments, and may thus
overrun it by at most sizeof(long)-1 bytes before it sees the final
newline (or hits the buffer length check). I considered padding out
all buffers by a suitable amount to "catch" the overrun, but
* this does not work for mmap()'d buffers: if you map 4096+8 bytes
from a 4096 byte file, accessing the last 8 bytes results in a
SIGBUS on my machine; and
* it would also be extremely ugly because it intrudes deep into the
unpacking machinery.
So I adapted it to not read beyond the buffer at all. Instead, it
reads the final partial word byte-by-byte and strings it together.
Then it can use the same logic as before to finish the hashing.
So far we enable this only on x86_64, where it provides nice speedup
for diff-related work:
Test origin/next tr/xdiff-fast-hash
-----------------------------------------------------------------------------
4000.1: log -3000 (baseline) 0.07(0.05+0.02) 0.08(0.06+0.02) +14.3%
4000.2: log --raw -3000 (tree-only) 0.37(0.33+0.04) 0.37(0.32+0.04) +0.0%
4000.3: log -p -3000 (Myers) 1.75(1.65+0.09) 1.60(1.49+0.10) -8.6%
4000.4: log -p -3000 --histogram 1.73(1.62+0.09) 1.58(1.49+0.08) -8.7%
4000.5: log -p -3000 --patience 2.11(2.00+0.10) 1.94(1.80+0.11) -8.1%
Perhaps other platforms could also benefit. However it does NOT work
on big-endian systems!
[jc: minimum style and compilation fixes]
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git-rebase--interactive stops due to a conflict and the only change
to be committed is in a submodule, the test for whether there is
anything to be committed ignores the staged submodule change. This
leads rebase to skip creating the commit for the change.
While unstaged submodule changes should be ignored to avoid needing to
update submodules during a rebase, it is safe to remove the
--ignore-submodules option to diff-index because --cached ensures that
it is only checking the index. This was discussed in [1] and a test is
included to ensure that unstaged changes are still ignored correctly.
[1] http://thread.gmane.org/gmane.comp.version-control.git/188713
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add missing options "--tags|--no-tags" and "--push".
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Drop the $GITP4 variable that was used to specify the script in
contrib/fast-import/. The command is called "git p4" now, not
"git-p4".
Note that configuration variables will remain in a section called
"git-p4".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In messages to the user and comments, change "git-p4" to "git p4".
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move git-p4 out of contrib/fast-import into the main code base,
aside other foreign SCM tools.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sed provided by Solaris in /usr/xpg4/bin has a bug whereby an
unanchored regex using * for zero or more repetitions sees two
separate matches fed to the substitution engine in some cases.
This is evidenced by:
$ for sed in /usr/xpg4/bin/sed /usr/bin/sed /opt/csw/gnu/sed; do \
echo 'ab' | $sed -e 's|[a]*|X|g'; \
done
XXbX
XbX
XbX
This bug was triggered during a git submodule clone operation as
exercised in the setup stage of t5526-fetch-submodules when using the
default SANE_TOOL_PATH for Solaris. It led to paths such as
..../.. being used in the submodule .git gitdir reference.
Using the expression 's|\([^/]*\(/*\)\)|..\2|g' provides the desired
result with all three three tested sed implementations but is harder
to read. As we do not need to handle fully qualified paths though,
the expression could actually be [^/]+ which isn't properly handled
either. Instead, use [^/][^/]*, as suggested by Andreas Schwab, which
works on all three tested sed implementations.
The new expression is semantically different than the original one.
It will not place a leading '..' on a fully qualified path as the
original expression did. All of the paths being passed through this
regex are relative and did not rely on this behaviour so it's a safe
change.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/cache-tree:
t0090: be prepared that 'wc -l' writes leading blanks
reset: update cache-tree data when appropriate
commit: write cache-tree data when writing index anyway
Refactor cache_tree_update idiom from commit
Test the current state of the cache-tree optimization
Add test-scrap-cache-tree
* cb/maint-t5541-make-server-port-portable:
t5541: check error message against the real port number used
remote-curl: Fix push status report when all branches fail
* tr/maint-bundle-boundary:
bundle: keep around names passed to add_pending_object()
t5510: ensure we stay in the toplevel test dir
t5510: refactor bundle->pack conversion
* tr/maint-bundle-long-subject:
t5704: match tests to modern style
strbuf: improve strbuf_get*line documentation
bundle: use a strbuf to scan the log for boundary commits
bundle: put strbuf_readline_fd in strbuf.c with adjustments
Otherwise:
/usr/bin/perl Makefile.PL PREFIX='/opt/git' INSTALL_BASE=''
Can't locate ExtUtils/MakeMaker.pm in @INC (@INC contains: ...) at Makefile.PL line 1.
BEGIN failed--compilation aborted at Makefile.PL line 1.
make[1]: *** [perl.mak] Error 2
make: *** [perl/perl.mak] Error 2
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When execvp reports EACCES, it can be one of two things:
1. We found a file to execute, but did not have
permissions to do so.
2. We did not have permissions to look in some directory
in the $PATH.
In the former case, we want to consider this a
permissions problem and report it to the user as such (since
getting this for something like "git foo" is likely a
configuration error).
In the latter case, there is a good chance that the
inaccessible directory does not contain anything of
interest. Reporting "permission denied" is confusing to the
user (and prevents our usual "did you mean...?" lookup). It
also prevents git from trying alias lookup, since we do so
only when an external command does not exist (not when it
exists but has an error).
This patch detects EACCES from execvp, checks whether we are
in case (2), and if so converts errno to ENOENT. This
behavior matches that of "bash" (but not of simpler shells
that use execvp more directly, like "dash").
Test stolen from Junio.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The POSIX standard specifies a return type of int for all six exec
functions. In addition, all exec functions return -1 on error, and
simply do not return on success. However, the current emulation of
the exec functions on mingw are declared with a void return type.
This would cause a problem should any code attempt to call the
exec function in a non-void context. In particular, if an exec
function were used in a conditional it would fail to compile.
In order to improve the fidelity of the emulation, we change the
return type of the mingw_execv[p] functions to int and return -1
on error.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The user can say "git push" without specifying any refspec. When using
the "upstream" semantics via the push.default configuration, the user
wants to update the "upstream" branch of the current branch, which is the
branch at a remote repository the current branch is set to integrate with,
with this command.
However, there are cases that such a "git push" that uses the "upstream"
semantics does not make sense:
- The current branch does not have branch.$name.remote configured. By
definition, "git push" that does not name where to push to will not
know where to push to. The user may explicitly say "git push $there",
but again, by definition, no branch at repository $there is set to
integrate with the current branch in this case and we wouldn't know
which remote branch to update.
- The current branch does have branch.$name.remote configured, but it
does not specify branch.$name.merge that names what branch at the
remote this branch integrates with. "git push" knows where to push in
this case (or the user may explicitly say "git push $remote" to tell us
where to push), but we do not know which remote branch to update.
- The current branch does have its remote and upstream branch configured,
but the user said "git push $there", where $there is not the remote
named by "branch.$name.remote". By definition, no branch at repository
$there is set to integrate with the current branch in this case, and
this push is not meant to update any branch at the remote repository
$there.
The first two cases were already checked correctly, but the third case was
not checked and we ended up updating the branch named branch.$name.merge
at repository $there, which was totally bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "add -p" sees an unmerged entry, it shows the combined
diff and then immediately skips the hunk. This can be
confusing in a variety of ways, depending on whether there
are other changes to stage (in which case you get the
superfluous combined diff output in between other hunks) or
not (in which case you get the combined diff and the program
exits immediately, rather than seeing "No changes").
The current behavior was not planned, and is just what the
implementation happens to do. Instead, let's explicitly
remove unmerged entries from our list of modified files, and
print a warning that we are ignoring them.
We can cheaply find which entries are unmerged by adding
"--raw" output to the "diff-files --numstat" we already run.
There is one non-obvious thing we must change when parsing
this combined output. Before this patch, when we saw a
numstat line for a file that did not have index changes, we
would create a new record with 'unchanged' in the 'INDEX'
field. Because "--raw" comes before "--numstat", we must
move this special-case down to the raw-line case (and it is
sufficient to move it rather than handle it in both places,
since any file which has a --numstat will also have a --raw
entry).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the "--index-version <n>" parameter, write the index out in the
specified version. With this, an index file that is written in newer
format (say v4) can be downgraded to be read by older versions of Git.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach the code to write the index in the v4 on-disk format.
Record the format version of the on-disk index we read from in the
index_state, and use the format when writing the new index out.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During the testing of the 1.7.10 rc series on Solaris for OpenCSW, it
was discovered that t7006-pager was failing due to finding a bad "sh"
in PATH after a call to execvp("sh", ...). This call was setup by
run_command.c:prepare_shell_cmd.
The PATH in use at the time saw /opt/csw/bin given precedence to
traditional Solaris paths such as /usr/bin and /usr/xpg4/bin. A
package named schilyutils (Joerg Schilling's utilities) was installed
on the build system and it delivered a modified version of the
traditional Solaris /usr/bin/sh as /opt/csw/bin/sh. This version of
sh suffers from many of the same problems as /usr/bin/sh.
The command-specific pager test failed due to the broken "sh" handling
^ as a pipe character. It tried to fork two processes when it
encountered "sed s/^/foo:/" as the pager command. This problem was
entirely dependent on the PATH of the user at runtime.
Possible fixes for this issue are:
1. Use the standard system() or popen() which both launch a POSIX
shell on Solaris as long as _POSIX_SOURCE is defined.
2. The git wrapper could prepend SANE_TOOL_PATH to PATH thus forcing
all unqualified commands run to use the known good tools on the
system.
3. The run_command.c:prepare_shell_command() could use the same
SHELL_PATH that is in the #! line of all all scripts and not rely
on PATH to find the sh to run.
Option 1 would preclude opening a bidirectional pipe to a filter
script and would also break git for Windows as cmd.exe is spawned from
system() (cf. v1.7.5-rc0~144^2, "alias: use run_command api to execute
aliases, 2011-01-07).
Option 2 is not friendly to users as it would negate their ability to
use tools of their choice in many cases. Alternately, injecting
SANE_TOOL_PATH such that it takes precedence over /bin and /usr/bin
(and anything with lower precedence than those paths) as
git-sh-setup.sh does would not solve the problem either as the user
environment could still allow a bad sh to be found. (Many OpenCSW
users will have /opt/csw/bin leading their PATH and some subset would
have schilyutils installed.)
Option 3 allows us to use a known good shell while still honouring the
users' PATH for the utilities being run. Thus, it solves the problem
while not negatively impacting either users or git's ability to run
external commands in convenient ways. Essentially, the shell is a
special case of tool that should not rely on SANE_TOOL_PATH and must
be called explicitly.
With this patch applied, any code path leading to
run_command.c:prepare_shell_cmd can count on using the same sane shell
that all shell scripts in the git suite use. Both the build system
and run_command.c will default this shell to /bin/sh unless
overridden.
Signed-off-by: Ben Walton <bwalton@artsci.utoronto.ca>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of "commit -t <file>" said the file is used "as the
initial version" of the commit message, but in the context of an SCM,
"version" is a loaded word that can needlesslyl confuse readers.
Explain the purpose of the mechanism without using "version".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because the entries are sorted by path, adjacent entries in the index tend
to share the leading components of them, and it makes sense to only store
the differences in later entries. In the v4 on-disk format of the index,
each on-disk cache entry stores the number of bytes to be stripped from
the end of the previous name, and the bytes to append to the result, to
come up with its name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
