This is the last remaining call to mkdir(2) that restricts the permission
bits by passing 0755. Just use the same mkdir_in_gitdir() used to create
the leaf directories.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original version of the git-clone just used mkdir(1) to create
the working directories. The version rewritten in C creates all
directories inside the working tree by using the mode argument of
0777 when calling mkdir(2) to let the umask take effect.
But the top-level directory of the working tree is created by
passing the mode argument of 0755 to mkdir(2), which results in an
overly tight restriction if the user wants to make directories group
writable with a looser umask like 002.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git commit --amend" used on a commit with an empty message fails
unless -m is given, whether or not --allow-empty-message is
specified.
Allow it to proceed to the editor with an empty commit message.
Unless --allow-empty-message is in force, it will still abort later
if an empty message is saved from the editor (this check was
already necessary to prevent a non-empty commit message being edited
to an empty one).
Add a test for --amend --edit of an empty commit message which fails
without this fix, as it's a rare case that won't get frequently
tested otherwise.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formerly, the documentation for <refname> would occasionally say
<name> instead of <refname>. Now it uniformly uses <refname>.
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we try to push a ref and the right-hand side of the
refspec does not find a match, we try to create it. If it is
not fully qualified, we try to guess where it would go in
the refs hierarchy based on the left-hand source side. If
the source side is not a ref, then we give up and give a
long explanatory message.
For deletions, however, this doesn't make any sense. We
would never want to create on the remote side, and if an
unqualified ref can't be matched, it is simply an error. The
current code handles this already because the left-hand side
is empty, and therefore does not give us a hint as to where
the right-hand side should go, and we properly error out.
Unfortunately, the error message is the long "we tried to
qualify this, but the source side didn't let us guess"
message, which is quite confusing.
Instead, we can just be more succinct and say "we can't
delete this because we couldn't find it". So before:
$ git push origin :bogus
error: unable to push to unqualified destination: bogus
The destination refspec neither matches an existing ref on the remote nor
begins with refs/, and we are unable to guess a prefix based on the source ref.
error: failed to push some refs to '$URL'
and now:
$ git push origin :bogus
error: unable to delete 'bogus': remote ref does not exist
error: failed to push some refs to '$URL'
It is tempting to also catch a fully-qualified ref like
"refs/heads/bogus" and generate the same error message.
However, that currently does not error out at all, and
instead gets sent to the remote side, which typically
generates a warning:
$ git push origin:refs/heads/bogus
remote: warning: Deleting a non-existent ref.
To $URL
- [deleted] bogus
While it would be nice to catch this error early, a
client-side error would mean aborting the push entirely and
changing push's exit code. For example, right now you can
do:
$ git push origin refs/heads/foo refs/heads/bar
and end up in a state where "foo" and "bar" are deleted,
whether both of them currently exist or not (and see an
error only if we actually failed to contact the server).
Generating an error would cause a regression for this use
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Julia Lawall noticed that in linux-next repository the commit object
60d5c9f5 (shown with the default abbreviation width baked into "git
blame") in output from
$ git blame -L 3675,3675 60d5c9f5b -- \
drivers/staging/brcm80211/brcmfmac/wl_iw.c
is no longer unique in the repository, which results in "short SHA1
60d5c9f5 is ambiguous".
Compute the minimum abbreviation width that ensures uniqueness when
the user did not specify the --abbrev option to avoid this.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only "diff --no-index -" does. Bolting the logic into the low-level
function diff_populate_filespec() was a layering violation from day
one. Move populate_from_stdin() function out of the generic diff.c
to its only user, diff-index.c.
Also make sure "-" from the command line stays a special token "read
from the standard input", even if we later decide to sanitize the
result from prefix_filename() function in a few obvious ways,
e.g. removing unnecessary "./" prefix, duplicated slashes "//" in
the middle, etc.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Regardless of where in the directory hierarchy you are, "-" on the
command line means the standard input. The old code knew too much
about how the low level machinery uses paths to read from the
working tree and did not bother to have the same check for "-" when
the command is run from the top-level.
Unify the codepaths for subdirectory case and toplevel case into one
and make it clearer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git diff --no-index" takes exactly two paths, not pathspecs, and
has its own way queue_diff() to populate the diff_queue. Do not
call diff_tree_setup_paths(), pretending as it takes pathspecs.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A path containing a space must be quoted when used as an
argument to either the copy or rename commands (because
unlike other commands, the path is not the final thing on
the line for those commands).
Commit 6280dfdc3b (fast-export: quote paths in output,
2011-08-05) previously attempted to fix fast-export's
quoting by passing all paths through quote_c_style().
However, that function does not consider the space to be a
character which requires quoting, so let's special-case the
space inside print_path(). This will cause space-containing
paths to also be quoted in other commands where such quoting
is not strictly necessary, but it does not hurt to do so.
The test from 6280dfdc3b did not detect this because, while
it does introduce renames in the export stream, it does not
actually turn on rename detection, so they were presented as
pairs of deletions/adds. Using "-M" reveals the bug.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Cygwin implementation of pread() is not thread-safe since, just
like the emulation provided by compat/pread.c, it uses a sequence of
seek-read-seek calls. In order to avoid failues due to thread-safety
issues, commit b038a61 disables threading when NO_PREAD is defined.
(ie when using the emulation code in compat/pread.c).
We introduce a new build variable, NO_THREAD_SAFE_PREAD, which allows
use to disable the threaded index-pack code on cygwin, in addition to
the above NO_PREAD case.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
abe199808c (git checkout -b: allow switching out of an unborn branch)
introduced a bug demonstrated by
git checkout --orphan foo
git checkout --detach
git symbolic-ref HEAD
which gives 'refs/heads/(null)'.
This happens because we strbuf_addf(&branch_ref, "refs/heads/%s",
opts->new_branch) when opts->new_branch can be NULL for --detach.
Catch and forbid this case, adding a test to t2017 to catch it in
future.
Signed-off-by: Chris Webb <chris@arachsys.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The patch 8f0bef6 refactored this script and made the variable $fh
unneeded in subs diff_applies and patch_update_file, but forgot to
remove them.
Signed-off-by: Thomas Badie <badie@lrde.epita.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a few more advices that we often have to give to new test
writers.
Also update an example where a double quote pair is used to enclose
a test body to use a single quote pair, which is more readable and
more importantly gives saner semantics for variable substitution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Otherwise it will be split at a space after "Program" when it is set
to "\\Program Files\perl" or something silly like that.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most notably, t4031 creates a small shell script that invokes perl
and we want to use "$PERL_PATH" to name the version of Perl suitable
for our use, read from GIT-BUILD-OPTS. The test would fail when it
is directly run in t/ directory from the shell or "make" is run in t/
directory.
This problem was hidden from "make test" run in the top-level
directory, because its Makefile exports PERL_PATH.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- do not fetch HEAD
- do not also fetch refs following "xxx"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running 'git diff --quiet <file1> <file2>', if file1 or file2
is outside the repository, it will exit(0) even if the files differ.
It should exit(1) when they differ.
This happens because 'diff_no_index' looks at the 'found_changes'
member from 'diff_options' to determine if changes were made. This
is the wrong thing to do, since it is only set if xdiff is actually
run and it finds a change (the diff machinery will optimize out the
xdiff call when it is not necessary) and in that case HAS_CHANGED
flag needs to be taken into account.
Use diff_result_code() that knows all these details for the correct
exit value instead.
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When diff-no-index is given a relative path to a file outside the
repository, it aborts with error. However, if the file is given
using an absolute path, the diff runs as expected. The two cases
should be treated the same.
Tests and commit message by Tim Henigan.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tim Henigan <tim.henigan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit fe77b41 introduced a new attribute to let the linkgit macro
create cross-directory HTML references from the technical/ and howto/
subdirectories back to the main documentation. We define that attribute
to "../" on the command-line when building inside those subdirectories,
and otherwise leave it unset under the assumption that it would default
to being blank. Instead, asciidoc omits the link entirely, leading to
broken documentation. Fix this by defining git-relative-html-prefix to
blank in asciidoc.conf (and an instance on the command-line, when
present, will override it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic of git-show has remained largely unchanged since around
5d7eeee (git-show: grok blobs, trees and tags, too, 2006-12-14): start
a revision walker with no_walk=1, look at its pending objects and
handle them one-by-one. For commits, this means stuffing them into a
new queue all alone, and running the walker.
Then Linus's f222abd (Make 'git show' more useful, 2009-07-13) came
along and set no_walk=0 whenever the user specifies a range. Which
appears to work fine, until you actually prod it hard enough, as the
preceding commit shows: UNINTERESTING commits will be marked as such,
but not walked further to propagate the marks.
Demonstrate this with the main tests of this patch: 'showing a range
walks (Y shape)'. The Y shape of history ensures that propagating the
UNINTERESTING marks is necessary to correctly exclude the main1
commit. The only example I could find actually requires that the
negative revisions are listed later, and in this scenario a dotted
range actually works. However, it is easy to find examples in git.git
where a dotted range is wrong, e.g.
$ git show v1.7.0..v1.7.1 | grep ^commit | wc -l
1297
$ git rev-list v1.7.0..v1.7.1 | wc -l
702
While there, also test a few other things that are not covered so far:
the -N way of triggering a range (added in 5853cae, DWIM 'git show -5'
to 'git show --do-walk -5', 2010-06-01), and the interactions of tags,
commits and ranges.
Pointed out by Dr_Memory on #git.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even with many new kinds of options, the command still takes the
single <tree> as the first argument.
Probably we would want to update the command to allow it to take
<tree>-ish at the end for consistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
verify_filename() can be called in two different contexts. Either we
just tried to interpret a string as an object name, and it fails, so
we try looking for a working tree file (i.e. we finished looking at
revs that come earlier on the command line, and the next argument
must be a pathname), or we _know_ that we are looking for a
pathname, and shouldn't even try interpreting the string as an
object name.
For example, with this change, we get:
$ git log COPYING HEAD:inexistant
fatal: HEAD:inexistant: no such path in the working tree.
Use '-- <path>...' to specify paths that do not exist locally.
$ git log HEAD:inexistant
fatal: Path 'inexistant' does not exist in 'HEAD'
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
diagnose_invalid_sha1_path() is meant to be called to diagnose a
misspelt <treeish>:<pathname> when <pathname> does not exist in
<treeish>. However, the code may call it if <treeish>:<pathname> is
invalid (which triggers another call with only_to_die == 1), but for
another reason. This happens when calling e.g.
git log existing-file HEAD:existing-file
because existing-file is a path and not a revision, the code
verifies that the arguments that follow to be paths. This leads to
an incorrect message like "existing-file does not exist in HEAD",
even though the path exists in HEAD.
Check that the search for <pathname> in <treeish> fails before
triggering the diagnosis.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option to autosquash is only used in case of an interactive rebase.
When merges are preserved, rebase uses an interactive rebase internally,
but in this case autosquash should still be disabled.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Do not mix byte and line counts. Binary files have byte counts;
skip them when accumulating line insertions/deletions.
The regression was introduced in e18872b.
Signed-off-by: Alexander Strasser <eclipse7@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no point in running a pager when --quiet is given,
since we are producing no output. The regular diff code path
handles this already, because --quiet implies --exit-code,
and we check for --exit-code when deciding not to run the
pager.
However, the "quiet implies exit-code" logic is done in
diff_setup_done, and the no-index code path sets up its
pager before running diff_setup_done, and misses this case.
We can fix this by reordering our initialization.
Currently we do:
1. read command line arguments into diff_options
2. Set pager if EXIT_CODE not requested
3. always set EXIT_CODE, since we are emulating
traditional diff
4. call diff_setup_done
We can fix the problem by moving pager initialization (step
2) after step 4. But step 3 must come after step 2 (since we
want to know whether the _user_ requested --exit-code, not
whether we turned it on unconditionally). So we must move
both.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-diff does not rely on the git wrapper to setup its
pager; instead, it sets it up on its own after seeing
whether --quiet or --exit-code has been specified. After
diff_no_index was split off from cmd_diff, commit b3fde6c
(git diff --no-index: default to page like other diff
frontends, 2008-05-26) duplicated the one-liner from
cmd_diff to turn on the pager.
Later, commit 8f0359f (Allow pager of diff command be
enabled/disabled, 2008-07-21) taught the the version in
cmd_diff to respect the pager.diff config, but the version
in diff_no_index was left behind. This meant that
git -c pager.diff=0 diff a b
would not use a pager, but
git -c pager.diff=0 diff --no-index a b
would. Let's fix it by factoring out a common function.
While we're there, let's update the antiquated comment,
which claims that the pager interferes with propagating the
exit code; this has not been the case since ea27a18 (spawn
pager via run_command interface, 2008-07-22).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.11-rc1~12^2~2 (2012-05-27) and friends split some git-svn code
into separate modules but did not update the fallback rules to install
them when NO_PERL_MAKEMAKER is set. Add the appropriate rules so
users without MakeMaker can use git-svn again.
Affected modules: Git::SVN::Prompt, Git::SVN::Fetcher,
Git::SVN::Editor, Git::SVN::Ra, Git::SVN::Memoize::YAML.
Reported-by: Adam Roben <adam@roben.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmali.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Adding or removing a module requires modifying both files to support
builds with and without MakeMaker. Add a comment to remind patch
authors and reviewers at the crucial moment.
Longer term, it would be nicer to maintain a single list, perhaps in a
separate file used by both build systems.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These were left in builtin.h after they were converted into
stand-alone programs or removed after experiments finished.
Signed-off-by: Luka Perkov <lists@lukaperkov.net>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When given a set of commits, cherry-pick will apply the changes for
all of them. Specifying a simple range will also work as expected.
This can lead the user to think that
git cherry-pick A B..C
may apply A and then B..C, but that is not what happens.
Instead the revs are given to a single invocation of rev-list, which
will consider A and C as positive revs and B as a negative one. The
commit A will not be used if it is an ancestor of B.
Add a note about this and add an example with this particular
syntax, which has shown up on the list a few times.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing description can be misleading and cause the reader to
think that --no-walk will do something if they specify a range in the
command line instead of a set of revs.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git-blame-filter and git-blame-create-overlay we want to save
(along with the values of point and mark) the current-buffer in scope
when calling the functions. The idiom
(save-excursion
(set-buffer buf)
...)
will correctly restore the correct buffer, but will not save the
values of point and mark in buf (only in the buffer current when the
save-excursion call is executed). The intention of these functions is
to save the current buffer from the calling scope and the values of
point and mark in the buffer they are modifying. The correct idiom
for this is
(with-current-buffer buf
(save-excursion
...))
Signed-off-by: Rüdiger Sonderfeld <ruediger@c-plusplus.de>
Signed-off-by: Lawrence Mitchell <wence@gmx.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
goto-line is a user-level command, instead use the lisp-level
construct recommended in Emacs documentation.
Signed-off-by: Rüdiger Sonderfeld <ruediger@c-plusplus.de>
Signed-off-by: Lawrence Mitchell <wence@gmx.li>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
