In a triangular workflow, each branch may have two distinct
points of interest: the @{upstream} that you normally pull
from, and the destination that you normally push to. There
isn't a shorthand for the latter, but it's useful to have.
For instance, you may want to know which commits you haven't
pushed yet:
git log @{push}..
Or as a more complicated example, imagine that you normally
pull changes from origin/master (which you set as your
@{upstream}), and push changes to your own personal fork
(e.g., as myfork/topic). You may push to your fork from
multiple machines, requiring you to integrate the changes
from the push destination, rather than upstream. With this
patch, you can just do:
git rebase @{push}
rather than typing out the full name.
The heavy lifting is all done by branch_get_push; here we
just wire it up to the "@{push}" syntax.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier documentation made vague references to "is set to build
on". Flesh that out with references to the config settings, so folks
can use git-config(1) to get more detail on what @{upstream} means.
For example, @{upstream} does not care about remote.pushdefault or
branch.<name>.pushremote.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The @{-N} syntax always referred to the N-th last thing checked out,
which can be either a branch or a commit (for detached HEAD cases).
However, the documentation only mentioned branches.
Edit in a "/commit" in the appropriate places.
Reported-by: Kevin <ikke@ikke.info>
Signed-off-by: Thomas Rast <tr@thomasrast.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of typing four capital letters "HEAD", you can say "@" now,
e.g. "git log @".
* fc/at-head:
Add new @ shortcut for HEAD
sha1-name: pass len argument to interpret_branch_name()
Make "foo^{tag}" to peel a tag to itself, i.e. no-op., and fail if
"foo" is not a tag. "git rev-parse --verify v1.0^{tag}" would be a
more convenient way to say "test $(git cat-file -t v1.0) = tag".
* rh/peeling-tag-to-tag:
peel_onion: do not assume length of x_type globals
peel_onion(): add support for <rev>^{tag}
Typing 'HEAD' is tedious, especially when we can use '@' instead.
The reason for choosing '@' is that it follows naturally from the
ref@op syntax (e.g. HEAD@{u}), except we have no ref, and no
operation, and when we don't have those, it makes sens to assume
'HEAD'.
So now we can use 'git show @~1', and all that goody goodness.
Until now '@' was a valid name, but it conflicts with this idea, so
let's make it invalid. Probably very few people, if any, used this name.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If possible, <rev> will be dereferenced even if it is not a tag type
(e.g., commit dereferenced to a tree).
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Complete the <rev>^{<type>} family of object descriptors by having
<rev>^{tag} dereference <rev> until a tag object is found (or fail if
unable).
At first glance this may not seem very useful, as commits, trees, and
blobs cannot be peeled to a tag, and a tag would just peel to itself.
However, this can be used to ensure that <rev> names a tag object:
$ git rev-parse --verify v1.8.4^{tag}
04f013dc38
$ git rev-parse --verify master^{tag}
error: master^{tag}: expected tag type, but the object dereferences to tree type
fatal: Needed a single revision
Users can already ensure that <rev> is a tag object by checking the
output of 'git cat-file -t <rev>', but:
* users may expect <rev>^{tag} to exist given that <rev>^{commit},
<rev>^{tree}, and <rev>^{blob} all exist
* this syntax is more convenient/natural in some circumstances
Signed-off-by: Richard Hansen <rhansen@bbn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit cdfd94837b, as it
does not just apply to "@" (and forms with modifiers like @{u}
applied to it), but also affects e.g. "refs/heads/@/foo", which it
shouldn't.
The basic idea of giving a short-hand might be good, and the topic
can be retried later, but let's revert to avoid affecting existing
use cases for now for the upcoming release.
Typing 'HEAD' is tedious, especially when we can use '@' instead.
The reason for choosing '@' is that it follows naturally from the
ref@op syntax (e.g. HEAD@{u}), except we have no ref, and no
operation, and when we don't have those, it makes sens to assume
'HEAD'.
So now we can use 'git show @~1', and all that goody goodness.
Until now '@' was a valid name, but it conflicts with this idea, so
let's make it invalid. Probably very few people, if any, used this name.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update documentation for "log" and "shortlog".
* rr/shortlog-doc:
builtin/shortlog.c: make usage string consistent with log
builtin/log.c: make usage string consistent with doc
git-shortlog.txt: make SYNOPSIS match log, update OPTIONS
git-log.txt: rewrite note on why "--" may be required
git-log.txt: generalize <since>..<until>
git-log.txt: order OPTIONS properly; move <since>..<until>
revisions.txt: clarify the .. and ... syntax
git-shortlog.txt: remove (-h|--help) from OPTIONS
In <rev1>..<rev2> and <rev1>...<rev2>, if either <rev1> or <rev2> is
omitted, it defaults to 'HEAD'. Add this detail to the document.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ta/glossary:
glossary: improve definitions of refspec and pathspec
The name of the hash function is "SHA-1", not "SHA1"
glossary: improve description of SHA-1 related topics
glossary: remove outdated/misleading/irrelevant entries
Use "SHA-1" instead of "SHA1" whenever we talk about the hash function.
When used as a programming symbol, we keep "SHA1".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Correct common spelling mistakes in comments and tests
kwset: fix spelling in comments
precompose-utf8: fix spelling of "want" in error message
compat/nedmalloc: fix spelling in comments
compat/regex: fix spelling and grammar in comments
obstack: fix spelling of similar
contrib/subtree: fix spelling of accidentally
git-remote-mediawiki: spelling fixes
doc: various spelling fixes
fast-export: fix argument name in error messages
Documentation: distinguish between ref and offset deltas in pack-format
i18n: make the translation of -u advice in one go
Most of these were found using Lucas De Marchi's codespell tool.
Signed-off-by: Stefano Lattarini <stefano.lattarini@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was no good way to ask "I have a random string that came from
outside world. I want to turn it into a 40-hex object name while
making sure such an object exists". A new peeling suffix ^{object}
can be used for that purpose, together with "rev-parse --verify".
* jc/sha1-name-object-peeler:
peel_onion(): teach $foo^{object} peeler
peel_onion: disambiguate to favor tree-ish when we know we want a tree-ish
A string that names an object can be suffixed with ^{type} peeler to
say "I have this object name; peel it until you get this type. If
you cannot do so, it is an error". v1.8.2^{commit} asks for a commit
that is pointed at an annotated tag v1.8.2; v1.8.2^{tree} unwraps it
further to the top-level tree object. A special suffix ^{} (i.e. no
type specified) means "I do not care what it unwraps to; just peel
annotated tag until you get something that is not a tag".
When you have a random user-supplied string, you can turn it to a
bare 40-hex object name, and cause it to error out if such an object
does not exist, with:
git rev-parse --verify "$userstring^{}"
for most objects, but this does not yield the tag object name when
$userstring refers to an annotated tag.
Introduce a new suffix, ^{object}, that only makes sure the given
name refers to an existing object. Then
git rev-parse --verify "$userstring^{object}"
becomes a way to make sure $userstring refers to an existing object.
This is necessary because the plumbing "rev-parse --verify" is only
about "make sure the argument is something we can feed to get_sha1()
and turn it into a raw 20-byte object name SHA-1" and is not about
"make sure that 20-byte object name SHA-1 refers to an object that
exists in our object store". When the given $userstring is already
a 40-hex, by definition "rev-parse --verify $userstring" can turn it
into a raw 20-byte object name. With "$userstring^{object}", we can
make sure that the 40-hex string names an object that exists in our
object store before "--verify" kicks in.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
rev-parse: clarify documentation of $name@{upstream} syntax
sha1_name: pass object name length to diagnose_invalid_sha1_path()
Makefile: keep LIB_H entries together and sorted
"git rev-parse" interprets string in string@{upstream} as a name of
a branch not a ref. For example, refs/heads/master@{upstream} looks
for an upstream branch that is merged by git-pull to ref
refs/heads/refs/heads/master not to refs/heads/master.
However the documentation could mislead a user to believe that the
string is interpreted as ref.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Output from "git branch -v" contains "(no branch)" that could be
localized, but the code to align it along with the names of branches
were counting in bytes, not in display columns.
* nd/branch-v-alignment:
branch -v: align even when branch names are in UTF-8
Branch names are usually in ASCII so they are not the problem. The
problem most likely comes from "(no branch)" translation, which is
in UTF-8 and makes display-width calculation just wrong. Clarify
this by renaming the field "len" in struct ref_item to "width", as
it stores the display-width and is used to compute the width of the
screen needed to show the names of all the branches, and compute the
display width using utf8_strwidth(), not byte-length with strlen().
Update document to mention the fact that we may want ref names in
UTF-8. Encodings that produce invalid UTF-8 are safe as utf8_strwidth()
falls back to strlen(). The ones that incidentally produce valid UTF-8
sequences will cause misalignment.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Either end of revision range operator can be omitted to default to HEAD,
as in "origin.." (what did I do since I forked) or "..origin" (what did
they do since I forked). But the current parser interprets ".." as an
empty range "HEAD..HEAD", and worse yet, because ".." does exist on the
filesystem, we get this annoying output:
$ cd Documentation/howto
$ git log .. ;# give me recent commits that touch Documentation/ area.
fatal: ambiguous argument '..': both revision and filename
Use '--' to separate filenames from revisions
Surely we could say "git log ../" or even "git log -- .." to disambiguate,
but we shouldn't have to.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was a bit hard to learn how <rev>^@, <rev>^! and various other
forms of range specifiers are used, because they were discussed
mostly in the prose part of the documentation, unlike various forms
of extended SHA-1 expressions that are listed in an enumerated list.
Also add a few more examples showing use of <rev>, <rev>..<rev> and
<rev>^! forms, stolen from a patch by Max Horn.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formerly, the documentation for <refname> would occasionally say
<name> instead of <refname>. Now it uniformly uses <refname>.
Signed-off-by: Max Horn <max@quendi.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explained <rev>~<n> as <n>th generation grand-parent, but a reader got
confused by the "grand-" part when <n> is 1.
Reword it with "ancestor"; with the "generation" and "following only the
first parents" around there, what we try to describe should be clear
enough now.
Noticed-by: Luke Diamand <luke@diamand.org>
Helped-by: Thomas Rast <trast@inf.ethz.ch>
Helped-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the reader has to parse a textual description in order to
find a specific syntax in the list.
Restructure as a labelled list with systematic labels as well as
concrete examples as a visual guide.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our use of quotes is inconsistent everywhere and within some files.
Before reworking the structure of revisions.txt, make the quotes
consistent:
`git command`
'some snippet or term'
The former gets typeset as code, the latter with some form of emphasis.
the man backend uses two types of emphasis.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a cherry-pick conflicts git advises:
$ git commit -c <original commit id>
to preserve the original commit message and authorship. Instead, let's
record the original commit id in CHERRY_PICK_HEAD and advise:
$ git commit -c CHERRY_PICK_HEAD
A later patch teaches git to handle the '-c CHERRY_PICK_HEAD' part.
Note that we record CHERRY_PICK_HEAD even in the case where there
are no conflicts so that we may use it to communicate authorship to
commit; this will then allow us to remove set_author_ident_env from
revert.c. However, we do not record CHERRY_PICK_HEAD when --no-commit
is used, as presumably the user intends to further edit the commit
and possibly even cherry-pick additional commits on top.
Tests and documentation contributed by Jonathan Nieder.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/oneline-sha1-name-from-specific-ref:
get_sha1: handle special case $commit^{/}
get_sha1: support $commit^{/regex} syntax
get_sha1_oneline: make callers prepare the commit list to traverse
get_sha1_oneline: fix lifespan rule of temp_commit_buffer variable
This works like ":/regex" syntax that finds a recently created commit
starting from all refs, but limits the discovery to those reachable from
the named commit.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently :path and ref:path can be used to refer to a specific object
in index or ref respectively. "path" component is absolute path. This
patch allows "path" to be written as "./path" or "../path", which is
relative to user's original cwd.
This does not work in commands for which startup_info is NULL
(i.e. non-builtin ones, it seems none of them needs this anyway).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation in revisions.txt did not match the implementation, and
the comment in sha1_name.c was incomplete.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, the documentation for revisions and ranges sits in the
git-rev-parse man page, i.e. a plumbing man page, along with the
documentation of all rev-parse modes.
Split off the revisions and ranges section into an included file to
prepare for restructuring.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
