Cleanup the documentation to explicitly state that --exclude-directory
is only meaningful when used with -u. Also make the documentation more
consistent with the usage message printed with read-tree --help-all.
The -m, --prefix, --reset options are performing similar actions
(setting some flags, read_cache_unmerged(), checking for illegal option
combinations). Instead of performing these actions when the options are
parsed, we delay performing them until after parse-opts has finished.
The bit fields in struct unpack_trees_options have been promoted to full
unsigned ints. This is necessary to avoid "foo ? 1 : 0" constructs to
set these fields.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic to checkout a different commit implements the safety to never
lose user's local changes. For example, switching from a commit to
another commit, when you have changed a path that is different between
them, need to merge your changes to the version from the switched-to
commit, which you may not necessarily be able to resolve easily. By
default, "git checkout" refused to switch branches, to give you a chance
to stash your local changes (or use "-m" to merge, accepting the risks of
getting conflicts).
This safety, however, had one deliberate hole since early June 2005. When
your local change was to remove a path (and optionally to stage that
removal), the command checked out the path from the switched-to commit
nevertheless.
This was to allow an initial checkout to happen smoothly (e.g. an initial
checkout is done by starting with an empty index and switching from the
commit at the HEAD to the same commit). We can tighten the rule slightly
to allow this special case to pass, without losing sight of removal
explicitly done by the user, by noticing if the index is truly empty when
the operation begins.
For historical background, see:
http://thread.gmane.org/gmane.comp.version-control.git/4641/focus=4646
This case is marked as *0* in the message, which both Linus and I said "it
feels somewhat wrong but otherwise we cannot start from an empty index".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only git-ls-files(1) describes the gitignore format in detail, and it does so
with reference to git-ls-files options. Most users don't use the plumbing
command git-ls-files directly, and shouldn't have to look in its manpage for
information on the gitignore format.
Create a new manpage gitignore(5) (Documentation/gitignore.txt), and factor
out the gitignore documentation into that file, changing it to refer to
.gitignore and $GIT_DIR/info/exclude as used by porcelain commands. Reference
gitignore(5) from other relevant manpages and documentation. Remove
now-redundant information on exclude patterns from git-ls-files(1), leaving
only information on how git-ls-files options specify exclude patterns and what
precedence they have.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This corrects the interface mistake of the previous one, and
gives a command line parameter to the only plumbing command that
currently needs it: "git-read-tree".
We can add the calls to set_alternate_index_output() to other
plumbing commands that update the index if/when needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master:
Documentation: git aliases
git-cvsserver asciidoc formatting tweaks
config.txt grammar, typo, and asciidoc fixes
Documentation: git-ls-tree (typofix)
Document git-ls-tree --fullname
Document git aliases support
make clean: remove dist-doc targets.
Misc doc improvements
Documentation: add missing docs make check-docs found.
Some doc typo fixes
Off-by-one error in get_path_prefix(), found by Valgrind
gitk: Re-read the descendent/ancestor tag & head info on update
All should be clear enough, except perhaps committish / commitish.
I just kept the more-used one within the current docs.
[jc: with rephrasing of check-ref-format description later discussed
on the list]
Signed-off-by: Francis Daly <francis@daoine.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* vb/sendemail:
Cleanup git-send-email.perl:extract_valid_email
read-tree --reset: update working tree file for conflicted paths.
Documentation: Spelling fixes
Builtin git-rev-parse.
fetch: do not report "same" unless -verbose.
With "--prefix=<path>/" option, read-tree keeps the current
index contents, and reads the contents of named tree-ish under
directory at `<prefix>`. The original index file cannot have
anything at the path `<prefix>` itself, and have nothing in
`<prefix>/` directory. This can be used to graft an
independent tree into a subdirectory of the current index.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The merge-one-file used to leave the working tree intact, but
it has long been changed to leave the merge result there since
2a68a8659f commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
More $ shell prompts in examples.
Minor English grammar improvements.
Added a few "See Also"s.
Use back-ticks on more command examples.
Signed-off-by: Jon Loeliger <jdl@freescale.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Many places in the documentation we still talked about reading
what commit is recorded in .git/HEAD or writing the new head
information into it, both assuming .git/HEAD is a symlink. That
is not necessarily so.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds documentation to quite a few command-line options.
Signed-off-by: Nikolai Weibull <nikolai@bitwi.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch makes the documentation refer to the index
as index instead of cache, but some references still
remain. (e.g. git-update-index.txt)
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The fixes focuses on improving the HTML output. Most noteworthy:
- Fix the Makefile to also make various *.html files depend on
included files.
- Consistently use 'NOTE: ...' instead of '[ ... ]' for additional
info.
- Fix ending '::' for description lists in OPTION section etc.
- Fix paragraphs in description lists ending up as preformated text.
- Always use listingblocks (preformatted text wrapped in lines with -----)
for examples that span empty lines, so they are put in only one HTML
block.
- Use '1.' instead of '(1)' for numbered lists.
- Fix linking to other GIT docs.
- git-rev-list.txt: put option descriptions in an OPTION section.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Somehow I missed it when we updated read-tree to support the recursive
merge strategy. Also -i should require -m as well, which the command
did not check.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The replacement was performed automatically by these commands:
perl -pi -e 's/link:(git.+)\.html\[\1\]/gitlink:$1\[1\]/g' \
README Documentation/*.txt
perl -pi -e 's/link:git\.html\[git\]/gitlink:git\[7\]/g' \
README Documentation/*.txt
Signed-off-by: Sergey Vlasov <vsu@altlinux.ru>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As promised, this is the "big tool rename" patch. The primary differences
since 0.99.6 are:
(1) git-*-script are no more. The commands installed do not
have any such suffix so users do not have to remember if
something is implemented as a shell script or not.
(2) Many command names with 'cache' in them are renamed with
'index' if that is what they mean.
There are backward compatibility symblic links so that you and
Porcelains can keep using the old names, but the backward
compatibility support is expected to be removed in the near
future.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: Johannes spent time and effort to see how consistent our
use of terminilogy is, and as a byproduct made these corrections
not related to the terminology unification. I really appreciate
it.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This explains the new merge world order that formally assigns
specific meaning to each of three tree-ish command line
arguments. It also mentions -u option
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This implements the "never lose the current cache information or
the work tree state, but favor a successful merge over merge
failure" principle in the fast-forward two-tree merge operation.
It comes with a set of tests to cover all the cases described in
the case matrix found in the new documentation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
