It might be POSIX, but there are shells that do not like the
expression 'export VAR=VAL'. To be on the safe side, rewrite them
into 'VAR=VAL' and 'export VAR'.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the curl program is not available (or not executable), and git clone is
started to clone a repository through http, this is the output
Initialized empty Git repository in /tmp/puppet/.git/
/usr/bin/git-clone: line 37: curl: command not found
Cannot get remote repository information.
Perhaps git-update-server-info needs to be run there?
This patch improves the error message by checking the return code when
running curl to exit immediately if it's 126 or 127; the error output now
is
Initialized empty Git repository in /tmp/puppet/.git/
/usr/bin/git-clone: line 37: curl: command not found
Adrian Bridgett noticed this and reported through
http://bugs.debian.org/440976
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unless the user explicitly asked hardlinking with the '-l'
option, we should not say "oops we cannot hardlink as you asked
so we are copying".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This changes the behaviour of cloning from a repository on the
local machine, by defaulting to "-l" (use hardlinks to share
files under .git/objects) and making "-l" a no-op. A new
option, --no-hardlinks, is also added to cause file-level copy
of files under .git/objects while still avoiding the normal
"pack to pipe, then receive and index pack" network transfer
overhead. The old behaviour of local cloning without -l nor -s
is availble by specifying the source repository with the newly
introduced file:///path/to/repo.git/ syntax (i.e. "same as
network" cloning).
* With --no-hardlinks (i.e. have all .git/objects/ copied via
cpio) would not catch the source repository corruption, and
also risks corrupted recipient repository if an
alpha-particle hits memory cell while indexing and resolving
deltas. As long as the recipient is created uncorrupted, you
have a good back-up.
* same-as-network is expensive, but it would catch the breakage
of the source repository. It still risks corrupted recipient
repository due to hardware failure. As long as the recipient
is created uncorrupted, you have a good back-up.
* The new default on the same filesystem, as long as the source
repository is healthy, it is very likely that the recipient
would be, too. Also it is very cheap. You do not get any
back-up benefit, though.
None of the method is resilient against the source repository
corruption, so let's discount that from the comparison. Then
the difference with and without --no-hardlinks matters primarily
if you value the back-up benefit or not. If you want to use the
cloned repository as a back-up, then it is cheaper to do a clone
with --no-hardlinks and two git-fsck (source before clone,
recipient after clone) than same-as-network clone, especially as
you are likely to do a git-fsck on the recipient if you are so
paranoid anyway.
Which leads me to believe that being able to use file:/// is
probably a good idea, if only for testability, but probably of
little practical value. We default to hardlinked clone for
everyday use, and paranoids can use --no-hardlinks as a way to
make a back-up.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If GIT_WORK_TREE is set git-clone will use that path for the
working tree.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-clone supports cloning from a repo with detached HEAD,
but if this HEAD is not behind any branch tip then it
would not have been fetched over dumb http, resulting in a
fatal: Not a valid object name HEAD
Since 928c210a, this would also happen on a http repo
with a HEAD that is a symbolic link where someone has
forgotton to run update-server-info.
Signed-off-by: Sven Verdoolaege <skimo@liacs.nl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that git-init has an option to quiet itself, use it if the -q
option was specified on the clone command line.
Signed-off-by: Jeffrey C. Ollie <jeff@ocjtech.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the remote repository does not have a "current branch", git-clone
was confused and did not set up the resulting new repository
correctly. It did not reset HEAD from the default 'master', and did
not write the SHA1 to the master branch.
Signed-off-by: Nanako Shiraishi <nanako3@bluebottle.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The problem is visible when cloning a local repo. The cloned
repository will have the origin url setup incorrectly: the origin name
will be copied verbatim in origin url of the cloned repository.
Normally, the name is to be expanded into absolute path.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c2f599e09f introduced a buglet while
cloning from a remote URL; we forgot to squelch the unnecessary
error message when we try to cd to the given "remote" name,
in order to see if it is a local directory.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If you have /home/me/git symlink pointing at /pub/git/mine,
trying to clone from /pub/git/his/ using relative path would not
work as expected:
$ cd /home/me
$ cd git
$ ls ../
his mine
$ git clone -l -s -n ../his/stuff.git
This is because "cd ../his/stuff.git" done inside git-clone to
check if the repository is local is confused by $PWD, which is
set to /home/me, and tries to go to /home/his/stuff.git which is
different from /pub/git/his/stuff.git.
We could probably say "set -P" (or "cd -P") instead, if we know
the shell is POSIX, but the way the patch is coded is probably
more portable.
[jc: this is updated with Andy Whitcroft's improvements]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Please see http://bugs.debian.org/409887
http-fetch expected the URL given at the command line to have a trailing
slash anyway, and then added '/objects...' when requesting objects files
from the http server.
Now it doesn't require the trailing slash in <url> anymore, and strips
trailing slashes if given nonetheless.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We already have -q in git clone. So for those who care to suppress
the noise during an http based clone, make -q actually do a quiet
http fetch.
Signed-off-by: Chris Wright <chrisw@sous-sol.org>
Cc: Fernando Herrera <fherrera@onirica.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The intent of the commit 'fetch & clone: do not output progress when
not on a tty' was to make fetching and cloning less chatty when
output was not redirected (such as in a cron job).
However, there was a serious thinko in that commit. It assumed that
the client _and_ the server got this update at the same time. But
this is obviously not the case, and therefore upload-pack died on
seeing the option "--no-progress".
This patch fixes that issue by making it a protocol option. So, until
your server is updated, you still see the progress, but once the
server has this patch, it will be quiet.
A minor issue was also fixed: when cloning, the checkout did not
heed no_progress.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds the option "--no-progress" to fetch-pack and upload-pack,
and makes fetch and clone pass this option when stdout is not a tty.
While at documenting that option, also document --strict and --timeout
options for upload-pack.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier we only used loose refs to anchor already existing
objects. When cloning from a repository that forked relatively
long time ago from the reference repository, this made the
want/have exchange by fetch-pack to do unnecessary work.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When using --reference to borrow objects from a neighbouring
repository while cloning, we copy the entire set of refs under
temporary "refs/reference-tmp/refs" space and set up the object
alternates. However, a textual symref copied this way would not
point at the right place, and causes later steps to emit error
messages (which is harmless but still alarming). This is most
visible when using a clone created with the separate-remote
layout as a reference, because such a repository would have
refs/remotes/origin/HEAD with 'ref: refs/remotes/origin/master'
as its contents.
Although we do not create symbolic-link based refs anymore, they
have the same problem because they are always supposed to be
relative to refs/ hierarchy (we dereference by hand, so it only
is good for HEAD and nothing else).
In either case, the solution is simply to remove them after
copying under refs/reference-tmp; if a symref points at a true
ref, that true ref itself is enough to ensure that objects
reachable from it do not needlessly get fetched.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Recent commit ae1dffcb28 by Junio
changed the way --upload-pack was passed around between clone,
fetch and ls-remote and modified the handling of the command
line parameter parsing.
Unfortunately FreeBSD 6.1 insists that the expression
expr --upload-pack=git-upload-pack : '-[^=]*=\(.*\)'
is illegal, as the --upload-pack option is not supported by their
implementation of expr.
Elsewhere in Git we use z as a leading prefix of both arguments,
ensuring the -- isn't seen by expr.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes them consistent with other commands that take the
path to the upload-pack program. We also pass --upload-pack
instead of --exec to the underlying fetch-pack, although it is
not strictly necessary.
[jc: original motivation from Uwe]
Signed-off-by: Junio C Hamano <junkio@cox.net>
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise we get an error like this on stderr:
cat: [...]/.git/refs/remotes/origin/master: No such file or directory
which makes it look like git-clone failed.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the default remote.origin.fetch configuration
created by git-clone so that it allows non-fast-forward updates.
When using the separate-remote layout with reflog enabled, it
does not make much sense to refuse to update the remote tracking
branch just because some of them do not fast-forward. git-fetch
issues warnings on non-fast-forwardness, and the user can peek
at what the previous state was using the reflog.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to adjust to:
count-objects -v: show number of packs as well.
which will break a test in this series.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Finally.
The separate-remote layout is so much more organized than
traditional and easier to work with especially when you need to
deal with remote repositories with multiple branches and/or you
need to deal with more than one remote repositories, and using
traditional layout for new repositories simply does not make
much sense.
Internally we still have code for 1:1 mappings to create a bare
clone; that is a good thing and will not go away.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now we lost the "first refspec is the one that is merged by default"
rule, there is no reason for clone to list the remote primary branch
in the config file explicitly anymore.
We still need it for the traditional layout for other reasons,
though.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This stops enumerating the set of branches found on the remote
side when a clone was made in the configuration file. Instead,
a single entry that maps each remote branch to the local
tracking branch for the remote under the same name is created.
Doing it this way not only shortens the configuration file, but
automatically adjusts to a new branch added on the remote side
after the clone is made.
Unfortunately this cannot be done for the traditional layout,
where we always need to special case the 'master' to 'origin'
mapping within the local branch namespace. But that is Ok; it
will be going away before v1.5.0.
We could also lose the "primary branch" mapping at the
beginning, but that has to wait until we implement the "forbid
'git pull' when we do not have branch.$current.merge for the
current branch" policy we earlier discussed. That should also
be in v1.5.0
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without any specification in the .git/config file, git-pull will execute
"git-pull origin"; which in turn defaults to pull from the first "pull"
definition for the remote, "origin".
This is a difficult set of defaults to track for a new user, and it's
difficult to see what tells git to do this (especially when it is
actually hard-coded behaviour). To ameliorate this slightly, this patch
explicitly specifies the default behaviour during a clone using the
"branch" section of the config.
For example, a clone of a typical repository would create a .git/config
containing:
[remote "origin"]
url = proto://host/repo.git
fetch = refs/heads/master:refs/remotes/origin/master
[branch "master"]
remote = origin
merge = refs/heads/master
The [branch "master"] section is such that there is no change to the
functionality of git-pull, but that functionality is now explicitly
documented.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
With making --use-separate-remote default when creating non-bare
clone, there was need for the flag which would turn off this behavior.
It was called --use-immingled-remote.
Immingle means to blend, to combine into one, to intermingle, but it
is a bit obscure word. I think it would be better to use simply
--no-separate-remote as the opposite to --use-separate-remote
option to git clone.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Rather than use a separate config .git/remotes/ for remote shortcuts, this
patch adds the analagous definitions to .git/config using git-repo-config
calls.
For example what was previously .git/remotes/origin
URL: proto://host/path
Pull: refs/heads/master:refs/heads/origin
Is now added to .git/config as
[remote "origin"]
url = proto://host/path
fetch = refs/heads/master:refs/heads/origin
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Most notably, the original code first copied refs/remotes/ that
remote side had to local, and overwrote them by mapping refs/heads/
from the remote when a dumb protocol transport was used.
This makes the clone behaviour by dumb protocol in line with the
git native and rsync transports.
Signed-off-by: Junio C Hamano <junkio@cox.net>
By specifying a depth, you can now clone a repository such that
all fetched ancestor-chains' length is at most "depth". For example,
if the upstream repository has only 2 branches ("A" and "B"), which
are linear, and you specify depth 3, you will get A, A~1, A~2, A~3,
B, B~1, B~2, and B~3. The ends are automatically made shallow
commits.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We've talked about this for quite some time on the list, and it
is a sane thing to do for a repository with an associcated
working tree.
For somebody who wants to use the traditional layout, there is a
backward compatibility option --use-immingled-remote, but it is
expected to be removed before the next major release.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
gitweb: Fix setting $/ in parse_commit()
daemon: do not die on older clients.
xdiff/xemit.c (xdl_find_func): Elide trailing white space in a context header.
git-clone: honor --quiet
Documentation for the [remote] config
prune-packed: Fix uninitialized variable.
I noticed that a cron-launched "git-clone --quiet" was generating
progress output to standard error -- and thus always spamming me.
The offending output was due to git-clone invoking git-read-tree with
its undocumented -v option.
This change turns off "-v" for --quiet.
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
the repository argument for git-clone should be relative to $PWD
instead of the given target directory. The old behavior gave us
surprising success and you need a few minute to know why it worked.
GIT_DIR is already exported so no need to cd into $D. And this makes
$PWD for git-fetch-pack, which is the actual command to take the given
repository dir, the same as git-clone.
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
