This is needed in build automation where the tree really needs to
be reset to known state.
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to fixing trivial and obvious typos, be careful about
the following points:
- Spell ASCII, URL and CRC in ALL CAPS;
- Spell Linux as Capitalized;
- Do not omit periods in "i.e." and "e.g.".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The descriptions of "select by numbers" section for interactive
git-clean are borrowed from git-add, and one sentence should be
replaced.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add new section "Interactive mode" for documentation of interactive
git-clean.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Show what would be done and the user must confirm before actually
cleaning.
Would remove ...
Would remove ...
Would remove ...
Remove [y/n]?
Press "y" to start cleaning, and press "n" if you want to abort.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git clean' is controlled by gitignore. Provide See Also link for it.
Use of core.excludesfile is implied.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current explanation of -e can be misread as allowing the user to say
I know 'git clean -XYZ' (substitute -XYZ with any option and/or
parameter) will remove paths A, B, and C, and I want them all removed
except for paths matching this pattern by adding '-e C' to the same
command line, i.e. 'git clean -e C -XYZ'.
But that is not what this option does. It augments the set of ignore rules
from the command line, just like the same "-e <pattern>" argument does
with the "ls-files" command (the user could probably pass "-e \!C" to tell
the command to clean everything the command would normally remove, except
for C). Also error out when both -x and -e are given with an explanation of
what -e means---it is a symptom of misunderstanding what -e does.
It also fixes small style nit in the parameter to add_exclude() call. The
current code only works because EXC_CMDL happens to be defined as 0.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
With the -e/--exclude option for git-clean, a user can specify files
that they haven't yet told git about, but either need for a short amount
of time or plan to tell git about them later. This allows one to still
use git-clean while these files are around without losing data.
Signed-off-by: Jared Hance <jaredhance@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, when called without -n and -f, git clean issues
fatal: clean.requireForce not set and -n or -f not given; refusing to clean
which leaves the user wondering why force is required when requireForce
is not set. Looking up in git-clean(1) does not help because its
description is wrong.
Change it so that git clean issues
fatal: clean.requireForce defaults to true and -n or -f not given; refusing to clean
in this situation (and "...set to true..." when it is set) which makes
it clearer that an unset config means true here, and adjust the
documentation.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
git branch, checkout, clean, mv and tag all have an option -f to override
certain checks. This patch makes them accept the long option --force as
a synonym.
While we're at it, document that checkout support --quiet as synonym for
its short option -q.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When you have an embedded git work tree in your work tree (be it
an orphaned submodule, or an independent checkout of an unrelated
project), "git clean -d -f" blindly descended into it and removed
everything. This is rarely what the user wants.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fredrik Skolmli and Thomas Rast noticed that it was left unstated that
"git clean" ran from a subdirectory will not affect anything outside it,
with or without path limiters.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing text is a little bit awkward. This rewrites the description
section to be more readable and friendly.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were a few minor grammatical errors that made this paragraph hard
to read. This patch fixes the errors in a very minimal manner.
Signed-off-by: Wesley J. Landaker <wjl@icecavern.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the SYNOPSIS says e.g. "<path>...", it is nice if the DESCRIPTION
also mentions "<path>..." and says the specified "paths" (note plural)
are used for $whatever. This fixes the obvious mismatches.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- git-ls-files.txt: typo in description of --ignored
- git-clean.txt: s/forceRequire/requireForce/
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a new configuration option clean.requireForce. If set, git-clean will
refuse to run, unless forced with the new -f option, or not acting due to -n.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When optional paths arguments are given, git-clean passes them
to underlying git-ls-files; with this, you can say:
git clean 'temp-*'
to clean only the garbage files whose names begin with 'temp-'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Signed-off-by: Pavel Roskin <proski@gnu.org>
This command removes untracked files from the working tree. This
implementation is based on cg-clean with some simplifications. The
documentation is included.
[jc: with trivial documentation fix, noticed by Jakub Narebski]
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
