* ml/color-grep:
grep: Colorize selected, context, and function lines
grep: Colorize filename, line number, and separator
Add GIT_COLOR_BOLD_* and GIT_COLOR_BG_*
If context lines are to be printed, grep separates them with hunk marks
("--\n"). These marks are printed between matches from different files,
too. They are not printed before the first file, though.
Threading was disabled when context line printing was enabled because
avoiding to print the mark before the first line was an unsolved
synchronisation problem. This patch separates the code for printing
hunk marks for the threaded and the unthreaded case, allowing threading
to be turned on together with the common -ABC options.
->show_hunk_mark, which controls printing of hunk marks between files in
show_line(), is now set in grep_buffer_1(), but only if some results
have already been printed and threading is disabled. The threaded case
is handled in work_done().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Colorize non-matching text of selected lines, context lines, and
function name lines. The default for all three is no color, but they
can be configured using color.grep.<slot>. The first two are similar
to the corresponding options in GNU grep, except that GNU grep applies
the color to the entire line, not just non-matching text.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Colorize the filename, line number, and separator in git grep output, as
GNU grep does. The colors are customizable through color.grep.<slot>.
The default is to only color the separator (in cyan), since this gives
the biggest legibility increase without overwhelming the user with
colors. GNU grep also defaults cyan for the separator, but defaults to
magenta for the filename and to green for the line number, as well.
There is one difference from GNU grep: When a binary file matches
without -a, GNU grep does not color the <file> in "Binary file <file>
matches", but we do.
Like GNU grep, if --null is given, the null separators are not colored.
For config.txt, use a a sub-list to describe the slots, rather than
a single paragraph with parentheses, since this is much more readable.
Remove the cast to int for `rm_eo - rm_so` since it is not necessary.
Signed-off-by: Mark Lodato <lodatom@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After 885d211e, the value of the ->fixed pattern option only depends on
the grep option of the same name. Regex flags don't matter any more,
because fixed mode and regex mode are strictly separated. Thus we can
simply copy the value from struct grep_opt to struct grep_pat, as we do
already for ->word_regexp and ->ignore_case.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
BSD and glibc have an extension to regexec which takes a buffer + length pair
instead of a NUL-terminated string. Since we already have the length computed
this can save us a strlen call inside regexec.
Signed-off-by: Benjamin Kramer <benny.kra@googlemail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git grep use threads when it is available.
The results below are best of five runs in the Linux repository (on a
box with two cores).
With the patch:
git grep qwerty
1.58user 0.55system 0:01.16elapsed 183%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+800outputs (0major+5774minor)pagefaults 0swaps
Without:
git grep qwerty
1.59user 0.43system 0:02.02elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+800outputs (0major+3716minor)pagefaults 0swaps
And with a pattern with quite a few matches:
With the patch:
$ /usr/bin/time git grep void
5.61user 0.56system 0:03.44elapsed 179%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+800outputs (0major+5587minor)pagefaults 0swaps
Without:
$ /usr/bin/time git grep void
5.36user 0.51system 0:05.87elapsed 100%CPU (0avgtext+0avgdata 0maxresident)k
0inputs+800outputs (0major+3693minor)pagefaults 0swaps
In either case we gain about 40% by the threading.
Signed-off-by: Fredrik Kuivinen <frekui@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically, any grep filter in "git log" family of commands were taken
as restricting to commits with any of the words in the commit log message.
However, the user almost always want to find commits "done by this person
on that topic". With "--all-match" option, a series of grep patterns can
be turned into a requirement that all of them must produce a match, but
that makes it impossible to ask for "done by me, on either this or that"
with:
log --author=me --committer=him --grep=this --grep=that
because it will require both "this" and "that" to appear.
Change the "header" parser of grep library to treat the headers specially,
and parse it as:
(all-match-OR (HEADER-AUTHOR me)
(HEADER-COMMITTER him)
(OR
(PATTERN this)
(PATTERN that) ) )
Even though the "log" command line parser doesn't give direct access to
the extended grep syntax to group terms with parentheses, this change will
cover the majority of the case the users would want.
This incidentally revealed that one test in t7002 was bogus. It ran:
log --author=Thor --grep=Thu --format='%s'
and expected (wrongly) "Thu" to match "Thursday" in the author/committer
date, but that would never match, as the timestamp in raw commit buffer
does not have the name of the day-of-the-week.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when running without the -F (--fixed-strings) option, we checked the
pattern and used fixmatch() codepath when it does not contain any regex
magic. Finding fixed strings with strstr() surely must be faster than
running the regular expression crud.
Not so. It turns out that on some libc implementations, using the
regcomp()/regexec() pair is a lot faster than running strstr() and
strcasestr() the fixmatch() codepath uses. Drop the optimization and use
the fixmatch() codepath only when the user explicitly asked for it with
the -F option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-1.6.4-grep-lookahead:
grep: optimize built-in grep by skipping lines that do not hit
This needs to be an evil merge as fixmatch() changed signature since
5183bf6 (grep: Allow case insensitive search of fixed-strings,
2009-11-06).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The internal "grep" engine we use checks for hits line-by-line, instead of
letting the underlying regexec()/fixmatch() routines scan for the first
match from the rest of the buffer. This was a major source of overhead
compared to the external grep.
Introduce a "look-ahead" mechanism to find the next line that would
potentially match by using regexec()/fixmatch() in the remainder of the
text to skip unmatching lines, and use it when the query criteria is
simple enough (i.e. punt for an advanced grep boolean expression like
"lines that have both X and Y but not Z" for now) and we are not running
under "-v" (aka "--invert-match") option.
Note that "-L" (aka "--files-without-match") is not a reason to disable
this optimization. Under the option, we are interested if the file has
any hit at all, and that is what we determine reliably with or without the
optimization.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git grep" currently an error when you combine the -F and -i flags.
This isn't in line with how GNU grep handles it.
This patch allows the simultaneous use of those flags.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Brian Collins <bricollins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It was found a bit too loud to show == separators between the function
headers.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Respect the userdiff attributes and config settings when looking for
lines with function definitions in git grep -p.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new option -p instructs git grep to print the previous function
definition as a context line, similar to diff -p. Such context lines
are marked with an equal sign instead of a dash. This option
complements the existing context options -A, -B, -C.
Function definitions are detected using the same heuristic that diff
uses. User defined regular expressions are not supported, yet.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out pre context line handling into the new function
show_pre_context() and change the algorithm to rewind by looking for
newline characters and roll forward again, instead of maintaining an
array of line beginnings and ends.
This is slower for hits, but the cost for non-matching lines becomes
zero. Normally, there are far more non-matching lines, so the time
spent in total decreases.
Before this patch (current Linux kernel repo, best of five runs):
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.134s
user 0m1.932s
sys 0m0.196s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m12.059s
user 0m11.837s
sys 0m0.224s
The same with this patch:
$ time git grep --no-ext-grep -B1 memset >/dev/null
real 0m2.117s
user 0m1.892s
sys 0m0.228s
$ time git grep --no-ext-grep -B1000 memset >/dev/null
real 0m2.986s
user 0m2.696s
sys 0m0.288s
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Print a hunk mark before matches from a new file are shown, in addition
to the current behaviour of printing them if lines have been skipped.
The result is easier to read, as (presumably unrelated) matches from
different files are separated by a hunk mark. GNU grep does the same.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move last_shown into struct grep_opt, to make it available in
show_line(), and then make the function handle the printing of hunk
marks for context lines in a central place.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command "git grep -w ''" dies as soon as it encounters an empty line,
reporting (wrongly) that "regexp returned nonsense". The first hunk of
this patch relaxes the sanity check that is responsible for that,
allowing matches to start at the end.
The second hunk complements it by making sure that empty matches are
rejected if -w was specified, as they are not really words.
GNU grep does the same:
$ echo foo | grep -c ''
1
$ echo foo | grep -c -w ''
0
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a zero-length match is encountered, break out of loop and show the rest
of the line uncoloured. Otherwise we'd be looping forever, trying to make
progress by advancing the pointer by zero characters.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After bol is forwarded, it doesn't represent the beginning of the line
any more. This means that the beginning-of-line marker (^) mustn't match,
i.e. the regex flag REG_NOTBOL needs to be set.
This bug was introduced by fb62eb7fab
("grep -w: forward to next possible position after rejected match").
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As noticed by Dmitry Gryazin: When a pattern is found but it doesn't
start and end at word boundaries, bol is forwarded to after the match and
the pattern is searched again. When a pattern is finally found between
word boundaries, the match offsets are off by the number of characters
that have been skipped.
This patch corrects the offsets to be relative to the value of bol as
passed to match_one_pattern() by its caller.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
* maint-1.6.1:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
* maint-1.6.0:
grep: fix segfault when "git grep '('" is given
Documentation: fix a grammatical error in api-builtin.txt
builtin-merge: fix a typo in an error message
Avoid a segfault when the command
git log --all-match
was issued, by ignoring the option.
Signed-off-by: Michele Ballabio <barra_cuda@katamail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On some systems, regoff_t that is the type of rm_so/rm_eo members are
wider than int; %.*s precision specifier expects an int, so use an explicit
cast.
A breakage reported on Darwin by Brian Gernhardt should be fixed with
this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Coloring matches makes them easier to spot in the output.
Add two options and two parameters: color.grep (to turn coloring on
or off), color.grep.match (to set the color of matches), --color
and --no-color (to turn coloring on or off, respectively).
The output of external greps is not changed.
This patch is based on earlier ones by Nguyễn Thái Ngọc Duy and
Thiago Alves.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Push pmatch and eflags to the callers of match_one_pattern(), which
allows them to specify regex execution flags and to get the location
of a match.
Since we only use the first element of the matches array and aren't
interested in submatches, no provision is made for callers to
provide a larger array.
eflags are ignored for fixed patterns, but that's OK, since they
only have a meaning in connection with regular expressions
containing ^ or $.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The only use of the struct grep_opt argument of match_expr_eval()
is to pass the option word_regexp to match_one_pattern(). By adding
a pattern flag for it we can reduce the number of function arguments
of these two functions, as a cleanup and preparation for adding more
in the next patch.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to returning if an expression matches a line,
match_expr_eval() updates the expression's hit flag if the parameter
collect_hits is set. It never sets collect_hits for children of AND
nodes, though, so their hit flag will never be updated. Because of
that we can return early if the first child didn't match, no matter
if collect_hits is set or not.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add is_regex_special(), a character class macro for chars that have a
special meaning in regular expressions.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replace isspecial() by the new macro is_glob_special(), which is more,
well, specialized. The former included the NUL char in its character
class, while the letter only included characters that are special to
file name globbing.
The new name contains underscores because they enhance readability
considerably now that it's made up of three words. Renaming the
function is necessary to document its changed scope.
The call sites of isspecial() are updated to check explicitly for NUL.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the new flag "fixed" to struct grep_pat and set it if the pattern
is doesn't contain any regex control characters in addition to if the
flag -F/--fixed-strings was specified.
This gives a nice speed up on msysgit, where regexec() seems to be
extra slow. Before (best of five runs):
$ time git grep grep v1.6.1 >/dev/null
real 0m0.552s
user 0m0.000s
sys 0m0.000s
$ time git grep -F grep v1.6.1 >/dev/null
real 0m0.170s
user 0m0.000s
sys 0m0.015s
With the patch:
$ time git grep grep v1.6.1 >/dev/null
real 0m0.173s
user 0m0.000s
sys 0m0.000s
The difference is much smaller on Linux, but still measurable.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grep -w accepts matches between non-word characters, only. If a match
from regexec() doesn't meet this criteria, grep continues its search
after the first character of that match.
We can be a bit smarter here and skip all positions that follow a word
character first, as they can't match our criteria. This way we can
consume characters quite cheaply and don't need to special-case the
handling of the beginning of a line.
Here's a contrived example command on msysgit (best of five runs):
$ time git grep -w ...... v1.6.1 >/dev/null
real 0m1.611s
user 0m0.000s
sys 0m0.015s
With the patch it's quite a bit faster:
$ time git grep -w ...... v1.6.1 >/dev/null
real 0m1.179s
user 0m0.000s
sys 0m0.015s
More common search patterns will gain a lot less, but it's a nice clean
up anyway.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
LF at the end of format strings given to die() is redundant because
die already adds one on its own.
Signed-off-by: Alexander Potashev <aspotashev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fix non-literal format in printf-style calls
git-submodule: Avoid printing a spurious message.
git ls-remote: make usage string match manpage
Makefile: help people who run 'make check' by mistake
These were found using gcc 4.3.2-1ubuntu11 with the warning:
warning: format not a string literal and no format arguments
Incorporated suggestions from Brandon Casey <casey@nrlssc.navy.mil>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Here's a trivial patch that adds "-z" and "--null" options to "git
grep". It was discussed on the mailing-list that git's "-z"
convention should be used instead of GNU grep's "-Z".
So things like 'git grep -l -z "$FOO" | xargs -0 sed -i "s/$FOO/$BOO/"'
do work now.
Signed-off-by: Raphael Zimmerer <killekulla@rdrz.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
When we tried to find commits done by AUTHOR, the first implementation
tried to pattern match a line with "^author .*AUTHOR", which later was
enhanced to strip leading caret and look for "^author AUTHOR" when the
search pattern was anchored at the left end (i.e. --author="^AUTHOR").
This had a few problems:
* When looking for fixed strings (e.g. "git log -F --author=x --grep=y"),
the regexp internally used "^author .*x" would never match anything;
* To match at the end (e.g. "git log --author='google.com>$'"), the
generated regexp has to also match the trailing timestamp part the
commit header lines have. Also, in order to determine if the '$' at
the end means "match at the end of the line" or just a literal dollar
sign (probably backslash-quoted), we would need to parse the regexp
ourselves.
An earlier alternative tried to make sure that a line matches "^author "
(to limit by field name) and the user supplied pattern at the same time.
While it solved the -F problem by introducing a special override for
matching the "^author ", it did not solve the trailing timestamp nor tail
match problem. It also would have matched every commit if --author=author
was asked for, not because the author's email part had this string, but
because every commit header line that talks about the author begins with
that field name, regardleses of who wrote it.
Instead of piling more hacks on top of hacks, this rethinks the grep
machinery that is used to look for strings in the commit header, and makes
sure that (1) field name matches literally at the beginning of the line,
followed by a SP, and (2) the user supplied pattern is matched against the
remainder of the line, excluding the trailing timestamp data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already have two instances where we want to determine if a buffer
contains binary data as opposed to text.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This lets you say:
git grep --all-match -e A -e B -e C
to find lines that match A or B or C but limit the matches from
the files that have all of A, B and C.
This is different from
git grep -e A --and -e B --and -e C
in that the latter looks for a single line that has all of these
at the same time.
Signed-off-by: Junio C Hamano <junkio@cox.net>
"git grep --fixed-strings -e GIT --and -e VERSION .gitignore"
misbehaved because we did not notice this needs to grab lines
that have the given two fixed strings at the same time.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This further updates the built-in grep engine so that we can say
something like "this pattern should match only in head". This
can be used to simplify grepping in the log messages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
