The option -u stands for --update and it is a good idea to make it clear
especially because this is the only mode of operation of "git add" that
does something different from "adding". Give longer --force synonym to -f
while we are at it as well.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve the git-svn-author test to check that extra newlines aren't inserted
into commit messages as they take a round trip from git to svn and back.
We test both with and without the --add-author-from option to git-svn.
git-svn: test that svn repo doesn't have extra newlines.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In git, all commits end in exactly one newline character. In svn, commits
end in zero or more newlines. Thus, when importing commits from svn into
git, git-svn always appends two extra newlines to ensure that the
git-svn-id: line is separated from the main commit message by at least one
blank line.
Combined with the terminating newline that's always present in svn commits
produced by git, you usually end up with two blank lines instead of one
between the commit message and git-svn-id: line, which is undesirable.
Instead, let's remove all trailing whitespace from the git commit on the way
through to svn.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that all of the policy violations have been cleaned up,
we can turn this on and start checking incoming patches.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In some cases, we produce a diffstat line even though no
lines have changed (e.g., because of an exact rename). In
this case, there is no +/- "graph" after the number of
changed lines. However, we output the space separator
unconditionally, meaning that these lines contained a
trailing space character.
This isn't a huge problem, but in cleaning up the output we
are able to eliminate some trailing whitespace from a test
vector.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When outputting a usage message with a blank line in the
header, we would output a line with four spaces. Make this
truly a blank line.
This helps us remove trailing whitespace from a test vector.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All of these violations are necessary parts of the tests
(which are generally checking the behavior of trailing
whitespace, or contain diff fragments with empty lines).
Our solution is two-fold:
1. Process input with whitespace problems using tr. This
has the added bonus that it becomes very obvious where
the bogus whitespace is intended to go.
2. Move large diff fragments into their own supplemental
files. This gets rid of the whitespace problem, since
supplemental files are not checked, and it also makes
the test script a bit easier to read.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These violations are simply wrong, but were never caught
because whitespace policy checking is turned off in the test
scripts.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-submodule was invoking "die" from within resolve-relative-url, but
this does not actually cause the script to exit. Fix this by returning
the error to the caller and have the caller exit.
While we're at it, clean up the quoting on invocation of
resolve_relative_url as it was wrong.
Signed-off-by: Mark Levedahl <mlevedahl@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... because we are now bisecting using a detached HEAD.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_sha1_from_fd() and write_sha1_to_fd() were dead code nobody called,
neither the latter's helper repack_object() was.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows calling:
git-instaweb -d apache2
and have the script Do The Right Thing. In particular, the auto-discovery
mechanism has been extended in order to be used for module listing as
well, and the call convention is that if the daemon is apache2/lighttpd
and the parameter to the "-d" option does not end by "-f", the "-f" is
added to the end of the option itself.
Change all backticks to $( ... ) as per Documentation/CodingGuidelines.
Signed-off-by: Flavio Poletti <flavio@polettix.it>
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test did "reset --hard" (where the HEAD commit has an empty
blob at path "empty") followed by "> empty", expecting that
the index does not notice the file _changed_ since git wrote
it out upon "reset" if the redirection is done quickly enough.
There was no need to do the emptying, and it gave a wrong result
if "reset --hard" happened on time T and then ">empty" happened on
the next second T+1. This fixes it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Suppose the "Unstaged Changes" pane contains a list of files, and one of
them is selected (i.e., that diff is currently being displayed). If one
clicks on the icon to stage the change, git-gui clears the diff and one
has to click on another filename to see the next diff in the list.
This patch changes that behaviour. If one clicks on the icon to stage
(or unstage) the file whose diff is being displayed, git-gui will move
on to the next filename in the list and display that diff instead of a
blank diff pane. If the selected file was at the end of the list, the
diff pane will display the previous diff instead; if the selected file
was the only one listed, the diff pane will become blank.
If no diff is currently being displayed, this patch changes nothing.
Signed-off-by: Abhijit Menon-Sen <ams@toroid.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* om/remote-fix:
"remote prune": be quiet when there is nothing to prune
remote show: list tracked remote branches with -n
remote prune: print the list of pruned branches
builtin-remote: split show_or_prune() in two separate functions
remote show: fix the -n option
If we are exporting a commit which has no parents we may be doing
it to a branch that already exists, causing fast-import to assume
the branch's current revision should be the sole parent of the
new commit. This can cause `git fast-export | git fast-import`
to produce an incorrect graph for:
A-------M----o------o refs/heads/master
/
B-+
In this graph A and B are initial commits (no parents) but if A was
output first to refs/heads/master and then B is output fast-import
would assume the graph was this instead:
A-------M----o------o refs/heads/master
\ /
+-B-+
Which would cause B, M, and all later commits to have a different
SHA-1, and obviously be quite a different graph.
Sending a reset command prior to B informs fast-import to clear
the implied parent of A, allowing B to remain an initial commit.
Reported-by: Ben Lynn <benlynn@gmail.com>
Deemed-obviously-correct-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Only ignore whitespace errors in t/tNNNN-*.sh and the t/tNNNN
subdirectories. Other files (like test libraries) should still be
checked.
Also fix a whitespace error in t/test-lib.sh.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The behaviour of "sed" on an incomplete line is unspecified by POSIX, and
On Solaris it apparently fails to process input that doesn't end in a LF.
Consequently constructs like
re=$(printf '%s' foo | sed -e 's/bar/BAR/g' $)
cause re to be set to the empty string. Such a construct is used in
git-submodule.sh.
Because the LF at the end of command output are stripped away by the
command substitution, it is a safe and sane change to add a LF at the end
of the printf format specifier.
Signed-off-by: Chris Ridd <chris.ridd@isode.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Higher stages store the blobs involved from their side verbatim. Removal
of uninteresting hunks are done by "diff --cc" upon demand and not stored
in the index.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We already had a hack to exclude @pxref{[URLS]} from the texi stream that
refers to nonexistent anchor.
This allows "make info" to produce gitman.info again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Unlike other manual pages (e.g. git-blame.txt), this used *NOTE:*
to show a side note headed with boldface string "NOTE". Use a paragraph
headed by [NOTE] like others instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit made it always say "Pruning $remote" but reported the
URL only when there is something to prune. Make it consistent by not
saying anything at all when there is nothing to prune.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract generating table header cell, for tables which can be sorted
by its columns, into print_sort_th_str() and print_sort_th_num()
subroutines, and print_sort_th() driver subroutine.
This avoids repetition, and should make further improvements (like
JavaScript sorting) easier. The subroutine uses now "replay" link,
so it is generic enough to be able to use it for other tables which
can be sorted by column, like for example 'heads' and 'tags' view
(sort by name, or sort by age).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract filling project list info, i.e. adding age, description, owner
and forks information, into fill_project_list_info() subroutine. This
is preparation for smart pagination and smart searching (to make it
possible to calculate/generate info only for those projects which will
be shown).
Small changes compared to original version to improve readability
(comments, names of variables, named loops).
Additionally, store both full ('descr_long') and shortened ('descr')
project description in Perl's internal form (using to_utf8).
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command is really too quiet which make it unconfortable to use.
Also implement a --dry-run option, in place of the original -n one, to
list stale tracking branches that will be pruned, but do not actually
prune them.
Add a test case for --dry-run.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allow us to add different features to each of them and keep the
code simple at the same time. Also create a get_remote_ref_states()
to avoid duplicated code.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perl version accepted a -n flag, to show local informations only
without querying remote heads, that seems to have been lost in the C
revrite.
This restores the older behaviour and add a test case.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For CVS repositories with unusual CVSROOT, git-cvsimport would fail:
$ git-cvsimport -v -C foo -d :pserver:anon:@cvs.example.com:/ foo
AuthReply: error 0 : no such repository
This patch ensures that the path is never empty, but at least '/'.
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This consolidates the common operations for closing the new temporary file
that we have written, before we move it into place with the final name.
There's some common code there (make it read-only and check for errors on
close), but more importantly, this also gives a single place to add an
fsync_or_die() call if we want to add a safe mode.
This was triggered due to Denis Bueno apparently twice being able to
corrupt his git repository on OS X due to an unlucky combination of kernel
crashes and a not-very-robust filesystem.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without [verse], the line break between the two synopsis lines does
not make it into the man page.
Signed-off-by: Lea Wiemann <LeWiemann@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code forgot to convert the blob contents into work tree
representation before writing it out. Also fixes leaks -- earlier
the updated blobs were never freed.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new argument teaches Git to not look for any untracked files,
saving cycles on slow file systems, or large repos.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
This lets you specify how you want untracked files to be listed.
The possible options are:
normal - Show untracked files and directories
all - Show all untracked files
The 'all' mode is used, if the mode is not specified.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
If you work on a repo with core.autocrlf == true, you would expect
every text file to have CRLF EOLs. However, if you by some operation,
get a conflict, then the conflicted file has LF EOLs.
Now, of course you'd go about resolving the files conflict, and then 'git
add <file>'. When you do that, you'll get the warning saying that LF will
be replaced by CRLF. Then you commit. The end result is that you have a
workingdir with a mix of LF and CRLF files, which after some more
operations may trigger a "whole file changed" diff, due to the workingdir
file now having LF EOLs.
An LF only conflict file results in the resolved file being in LF,
the commit is in LF and a warning saying that LF will be replaced
by CRLF, and the working dir ends up with a mix of CRLF and LF files.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Attributes can be specified at three different places: the internal
table of default values, the file $GIT_DIR/info/attributes and files
named .gitattributes in the work tree. Since bare repositories don't
have a work tree, git should ignore any .gitattributes files there.
This patch makes git do that, so the only way left for a user to specify
attributes in a bare repository is the file info/attributes (in addition
to changing the defaults and recompiling).
In addition, git-check-attr is now allowed to run without a work tree.
Like any user of the code in attr.c, it ignores the .gitattributes files
when run in a bare repository. It can still read from info/attributes.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_blame is dead code. It's possible to plug it in place of
git_blame2, but I don't know whether anyone does still that,
because git_blame2 can now be considered stable enough, I think.
Signed-off-by: Rafael Garcia-Suarez <rgarciasuarez@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Paths marked with this attribute are not output to git-archive
output.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
