The `p4-pre-submit` hook is executed before git-p4 submits code.
If the hook exits with non-zero value, submit process not start.
Signed-off-by: Chen Bin <chenbin.sh@gmail.com>
Reviewed-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Typeset commands and similar things with as `git foo` instead of
'git foo' or 'git-foo' and add linkgit to the commands which run
the hooks.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Reviewed-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git worktree add" learned to run the post-checkout hook, just like
"git checkout" does, after the initial checkout.
* es/worktree-checkout-hook:
worktree: invoke post-checkout hook (unless --no-checkout)
git-clone and git-checkout both invoke the post-checkout hook following
a successful checkout, yet git-worktree neglects to do so even though it
too "checks out" the worktree. Fix this oversight.
Implementation note: The newly-created worktree may reference a branch
or be detached. In the latter case, a commit lookup is performed, though
the result is used only in a boolean sense to (a) determine if the
commit actually exists, and (b) assign either the branch name or commit
ID to HEAD. Since the post-commit hook needs to know the ID of the
checked-out commit, the lookup now needs to be done in all cases, rather
than only when detached. Consequently, a new boolean is needed to handle
(b) since the lookup result itself can no longer perform that role.
Reported-by: Matthew K Gumbel <matthew.k.gumbel@intel.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The text meant to say that receive-pack runs these hooks, and only
because receive-pack is not a command the end users use every day
(ever), as an explanation also meantioned that it is run in response
to 'git push', which is an end-user facing command readers hopefully
know about.
This unfortunately gave an incorrect impression that 'git push'
always result in the hook to run. If the refs push wanted to update
all already had the desired value, these hooks are not run.
Explicitly mention "... and updates reference(s)" as a precondition
to avoid this confusion.
Helped-by: Christoph Michelbach <michelbach94@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We learned to talk to watchman to speed up "git status" and other
operations that need to see which paths have been modified.
* bp/fsmonitor:
fsmonitor: preserve utf8 filenames in fsmonitor-watchman log
fsmonitor: read entirety of watchman output
fsmonitor: MINGW support for watchman integration
fsmonitor: add a performance test
fsmonitor: add a sample integration script for Watchman
fsmonitor: add test cases for fsmonitor extension
split-index: disable the fsmonitor extension when running the split index test
fsmonitor: add a test tool to dump the index extension
update-index: add fsmonitor support to update-index
ls-files: Add support in ls-files to display the fsmonitor valid bit
fsmonitor: add documentation for the fsmonitor extension.
fsmonitor: teach git to optionally utilize a file system monitor to speed up detecting new or changed files.
update-index: add a new --force-write-index option
preload-index: add override to enable testing preload-index
bswap: add 64 bit endianness helper get_be64
This includes the core.fsmonitor setting, the fsmonitor integration hook,
and the fsmonitor index extension.
Also add documentation for the new fsmonitor options to ls-files and
update-index.
Signed-off-by: Ben Peart <benpeart@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As "git commit" to conclude a conflicted "git merge" honors the
commit-msg hook, "git merge" that records a merge commit that
cleanly auto-merges should, but it didn't.
* sb/merge-commit-msg-hook (2017-09-22) 1 commit
(merged to 'next' on 2017-09-25 at 096e0502a8)
+ Documentation/githooks: mention merge in commit-msg hook
Add documentation for a topic that has recently graduated to the
'master' branch.
* sb/merge-commit-msg-hook:
Documentation/githooks: mention merge in commit-msg hook
The commit-msg hook is invoked by both commit and merge now.
Reported-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Message and doc updates.
* ma/up-to-date:
treewide: correct several "up-to-date" to "up to date"
Documentation/user-manual: update outdated example output
Follow the Oxford style, which says to use "up-to-date" before the noun,
but "up to date" after it. Don't change plumbing (specifically
send-pack.c, but transport.c (git push) also has the same string).
This was produced by grepping for "up-to-date" and "up to date". It
turned out we only had to edit in one direction, removing the hyphens.
Fix a typo in Documentation/git-diff-index.txt while we're there.
Reported-by: Jeffrey Manian <jeffrey.manian@gmail.com>
Reported-by: STEVEN WHITE <stevencharleswhitevoices@gmail.com>
Signed-off-by: Martin Ågren <martin.agren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a simple example that replaces an outdated example
that was removed. This ensures that there's at the least
a simple example that illustrates what could be done
using the hook just by enabling it.
Also, update the documentation.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Prepare the 'preare-commit-msg' sample script for
upcoming changes. Preparation includes removal of
an example that has outlived it's purpose. The example
is the one that comments the "Conflicts:" part of a
merge commit message. It isn't relevant anymore as
it's done by default since 261f315b ("merge & sequencer:
turn "Conflicts:" hint into a comment", 2014-08-28).
Further update the relevant comments from the sample script
and update the documentation.
Signed-off-by: Kaartic Sivaraam <kaarticsivaraam91196@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, send-email has support for rudimentary e-mail validation.
Allow the user to add support for more validation by providing a
sendemail-validate hook.
Helped-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Jonathan Tan <jonathantanmy@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Listing the specific hooks might feel verbose but without it the
reader is left to wonder which hooks are triggered during the
push. Something which is not immediately obvious when only trying
to find out where the hook is executed.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Reviewed-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 722ff7f87 (receive-pack: quarantine objects until
pre-receive accepts, 2016-10-03) changed the underlying
details of how we take in objects. This is mostly
transparent to the user, but there are a few things they
might notice. Let's document them.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The environment variable GIT_PUSH_OPTION_COUNT is set to the number of
push options sent, and GIT_PUSH_OPTION_{0,1,..} is set to the transmitted
option.
The code is not executed as the push options are set to NULL, nor is the
new capability advertised.
There was some discussion back and forth how to present these push options
to the user as there are some ways to do it:
Keep all options in one environment variable
============================================
+ easiest way to implement in Git
- This would make things hard to parse correctly in the hook.
Put the options in files instead,
filenames are in GIT_PUSH_OPTION_FILES
======================================
+ After a discussion about environment variables and shells, we may not
want to put user data into an environment variable (see [1] for example).
+ We could transmit binaries, i.e. we're not bound to C strings as
we are when using environment variables to the user.
+ Maybe easier to parse than constructing environment variable names
GIT_PUSH_OPTION_{0,1,..} yourself
- cleanup of the temporary files is hard to do reliably
- we have race conditions with multiple clients pushing, hence we'd need
to use mkstemp. That's not too bad, but still.
Use environment variables, but restrict to key/value pairs
==========================================================
(When the user pushes a push option `foo=bar`, we'd
GIT_PUSH_OPTION_foo=bar)
+ very easy to parse for a simple model of push options
- it's not sufficient for more elaborate models, e.g.
it doesn't allow doubles (e.g. cc=reviewer@email)
Present the options in different environment variables
======================================================
(This is implemented)
* harder to parse as a user, but we have a sample hook for that.
- doesn't allow binary files
+ allows the same option twice, i.e. is not restrictive about
options, except for binary files.
+ doesn't clutter a remote directory with (possibly stale)
temporary files
As we first want to focus on getting simple strings to work
reliably, we go with the last option for now. If we want to
do transmission of binaries later, we can just attach a
'side-channel', e.g. "any push option that contains a '\0' is
put into a file instead of the environment variable and we'd
have new GIT_PUSH_OPTION_FILES, GIT_PUSH_OPTION_FILENAME_{0,1,..}
environment variables".
[1] 'Shellshock' https://lwn.net/Articles/614218/
Signed-off-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the hardcoded lookup for .git/hooks/* to optionally lookup in
$(git config core.hooksPath)/* instead.
This is essentially a more intrusive version of the git-init ability to
specify hooks on init time via init templates.
The difference between that facility and this feature is that this can
be set up after the fact via e.g. ~/.gitconfig or /etc/gitconfig to
apply for all your personal repositories, or all repositories on the
system.
I plan on using this on a centralized Git server where users can create
arbitrary repositories under /gitroot, but I'd like to manage all the
hooks that should be run centrally via a unified dispatch mechanism.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change:
* Sentences that needed "the" or "a" to either add those or change them
so they don't need them.
* The little tangent about "You can use this to do X (if your project
wants to do X)" can just be shortened to "if you want to do X".
* s/parameter/parameters/ when the plural made more sense.
Most of this goes all the way back to the initial introduction of
hooks.txt in 6d35cc76 (Document hooks., 2005-09-02).
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any ACL you implement via an 'update' hook isn't actual access control
if the user has login access to the machine running git, because they
can trivially just build their own version of Git which doesn't run the
hook.
Change the documentation to take this dangerous edge case into account,
and remove the mention of the advice originating on the mailing list,
the users reading this don't care where the idea came up.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the documentation so that:
* We don't talk about "little scripts". Hooks can be as big as you
want, and don't have to be scripts, just call them "programs".
* We note that we change the working directory before a hook is called,
nothing documented this explicitly, but the current behavior is
predictable. It helps a lot to know what directory these hooks will
be executed from.
* We don't make claims about the example hooks which may not be true
depending on the configuration of 'init.templateDir'. Clarify that
we're talking about the default settings of git-init in those cases,
and move some of this documentation into git-init's documentation
about the default templates.
* We briefly note in the intro that hooks can get their arguments in
various different ways, and that how exactly is described below for
each hook.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive.denyCurrentBranch is set to updateInstead, a push that
tries to update the branch that is currently checked out is accepted
only when the index and the working tree exactly matches the
currently checked out commit, in which case the index and the
working tree are updated to match the pushed commit. Otherwise the
push is refused.
This hook can be used to customize this "push-to-deploy" logic. The
hook receives the commit with which the tip of the current branch is
going to be updated, and can decide what kind of local changes are
acceptable and how to update the index and the working tree to match
the updated tip of the current branch.
For example, the hook can simply run `git read-tree -u -m HEAD "$1"`
in order to emulate 'git fetch' that is run in the reverse direction
with `git push`, as the two-tree form of `read-tree -u -m` is
essentially the same as `git checkout` that switches branches while
keeping the local changes in the working tree that do not interfere
with the difference between the branches.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In addition to fixing trivial and obvious typos, be careful about
the following points:
- Spell ASCII, URL and CRC in ALL CAPS;
- Spell Linux as Capitalized;
- Do not omit periods in "i.e." and "e.g.".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use "SHA-1" instead of "SHA1" whenever we talk about the hash function.
When used as a programming symbol, we keep "SHA1".
Signed-off-by: Thomas Ackermann <th.acker@arcor.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.8.1:
bundle: Add colons to list headings in "verify"
bundle: Fix "verify" output if history is complete
Documentation: filter-branch env-filter example
git-filter-branch.txt: clarify ident variables usage
git-compat-util.h: Provide missing netdb.h definitions
describe: Document --match pattern format
Documentation/githooks: Explain pre-rebase parameters
update-index: list supported idx versions and their features
diff-options: unconfuse description of --color
read-cache.c: use INDEX_FORMAT_{LB,UB} in verify_hdr()
index-format.txt: mention of v4 is missing in some places
Descriptions borrowed from templates/hooks--pre-rebase.sample.
Signed-off-by: W. Trevor King <wking@tremily.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update documentation to change "GIT" which was a poor-man's small
caps to "Git". The latter was the intended spelling.
Also change "git" spelled in all-lowercase to "Git" when it refers
to the system as the whole or the concept it embodies, as opposed to
the command the end users would type.
* ta/doc-no-small-caps:
Documentation: StGit is the right spelling, not StGIT
Documentation: describe the "repository" in repository-layout
Documentation: add a description for 'gitfile' to glossary
Documentation: do not use undefined terms git-dir and git-file
Documentation: the name of the system is 'Git', not 'git'
Documentation: avoid poor-man's small caps GIT
Add support for a pre-push hook which can be used to determine if the
set of refs to be pushed is suitable for the target repository. The
hook is run with two arguments specifying the name and location of the
destination repository.
Information about what is to be pushed is provided by sending lines of
the following form to the hook's standard input:
<local ref> SP <local sha1> SP <remote ref> SP <remote sha1> LF
If the hook exits with a non-zero status, the push will be aborted.
This will allow the script to determine if the push is acceptable based
on the target repository and branch(es), the commits which are to be
pushed, and even the source branches in some cases.
Signed-off-by: Aaron Schrab <aaron@schrab.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation for the post-rewrite hook contains a paragraph from
its early development, where the automatic notes copying facilities
were not part of the series and thus this had to be a hook. Later
versions of the series implemented notes copying as a core feature.
Thus mentioning post-rewrite-copy-notes was never correct. As the
other hooks do not have a "there is no default hook, but..." sentence
unless they ship a sample hook in either templates or contrib, we
simply remove the whole paragraph.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Implement helper functions to load the rewriting config, and to
actually copy the notes. Also document the config.
Secondly, also implement an undocumented --for-rewrite=<cmd> option to
'git notes copy' which is used like --stdin, but also puts the
configuration for <cmd> into effect. It will be needed to support the
copying in git-rebase.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Acked-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This defines the behaviour of the post-rewrite hook support, which
will be implemented in the following patches.
We deliberately do not document how often the hook will be invoked per
rewriting command, but the interface is designed to keep that at
"once". This would currently not matter too much, since both rebase
and filter-branch are shellscripts and spawn many processes anyway.
However, when a fast sequencer in C is implemented, it will be
beneficial to only have to run the hook once.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
This hook runs after "git fetch" in the repository the objects are
fetched from as the user who fetched, and has security implications.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
All hooks are currently in its own section. Which may confuse users,
because the section name serves as the hook file name and sections are
all caps for man pages. Putting them into a new HOOKS section and each
hook into a subsection keeps the case to lower case.
Signed-off-by: Bert Wesarg <bert.wesarg@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A request to clone the repository does not give any "have" but asks for
all the refs we offer with "want". When a request does not ask to clone
the repository fully, but asks to fetch some refs into an empty
repository, it will not give any "have" but its "want" won't ask for all
the refs we offer.
If we suppose (and I would say this is a rather big if) that it makes
sense to distinguish these two cases, a hook cannot reliably do this
alone. The hook can detect lack of "have" and bunch of "want", but there
is no direct way to tell if the other end asked for all refs we offered,
or merely most of them.
Between the time we talked with the other end and the time the hook got
called, we may have acquired more refs or lost some refs in the repository
by concurrent operations. Given that we plan to introduce selective
advertisement of refs with a protocol extension, it would become even more
difficult for hooks to guess between these two cases.
This adds "kind [clone|fetch]" to hook's input, as a stable interface to
allow the hooks to tell these cases apart.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After upload-pack successfully finishes its operation, post-upload-pack
hook can be called for logging purposes.
The hook is passed various pieces of information, one per line, from its
standard input. Currently the following items can be fed to the hook, but
more types of information may be added in the future:
want SHA-1::
40-byte hexadecimal object name the client asked to include in the
resulting pack. Can occur one or more times in the input.
have SHA-1::
40-byte hexadecimal object name the client asked to exclude from
the resulting pack, claiming to have them already. Can occur zero
or more times in the input.
time float::
Number of seconds spent for creating the packfile.
size decimal::
Size of the resulting packfile in bytes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation of the post-checkout hook just talks
about git-checkout. But recently git-clone was changed to
call it too, unless the -no-checkout (-n) option is used.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
