Customize diff-options depending on particular command as follows,
mostly to make git-diff and git-format-patch manuals less confusing:
* git-format-patch:
- Mark --patch-with-stat as being the default.
- Change -p description so that it matches what it actually does and
so that it doesn't refer to absent "section on generating
patches".
* git-diff: mark -p as being the default.
* git-diff-index/git-diff-files/git-diff-tree: mark --raw as being
the default.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This provides a way for scripts to get at the new standard exclude
function.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/fetch-fix:
git-fetch: avoid local fetching from alternate (again)
rev-list: Introduce --quiet to avoid /dev/null redirects
run-command: Support sending stderr to /dev/null
git-fetch: Always fetch tags if the object they reference exists
* bg/format-patch-N:
Rearrange git-format-patch synopsis to improve clarity.
format-patch: Test --[no-]numbered and format.numbered
format-patch: Add configuration and off switch for --numbered
Junio screwed up when applying the previous round of the patch;
rewording from "previous" to "old" does make the description
clearer.
Also revert the rewording from head to branch. The description
is talking about the branch's tip commit and using the word head
is clearer.
Based on input from Sergei and Bruce.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-clean: honor core.excludesfile
Documentation: Fix man page breakage with DocBook XSL v1.72
git-remote.txt: fix typo
core-tutorial.txt: Fix argument mistake in an example.
replace reference to git-rm with git-reset in git-commit doc
Grammar fixes for gitattributes documentation
Don't allow fast-import tree delta chains to exceed maximum depth
revert/cherry-pick: allow starting from dirty work tree.
t/t3404: fix test for a bogus todo file.
Conflicts:
fast-import.c
From version 1.72 it will replace all dots in roff requests with U+2302
("house" character), and add escaping in output for all instances of dot
that are not in roff requests. This caused the ".ft" hack forcing
monospace font in listingblocks to end up as "\&.ft" and being visible
in the resulting man page.
The fix adds a DOCBOOK_XSL_172 build variable that will disable the
hack. To allow this variable to be defined in config.mak it also moves
build variable handling below the inclusion of config.mak.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of examples has wrong output given the arguments provided.
Fix arguments to match the output.
Fix a minor syntax mistake in another place.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message in git-commit suggesting to use 'git rm --cached'
to unstage is just plain wrong. It really should mention 'git reset'.
Suggested by Jan Hudec.
Signed-off-by: Jing Xue <jingxue@digizenstudio.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tweak the "filter" section of the gitattributes documentation to add
some
missing articles and improve some word choices without changing the
semantics of the section.
Signed-off-by: Wincent Colaiuta <win@wincent.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add some basic documentation on the --mirror mode for git-push.
Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... by changing git-tar-tree reference to git-archive and removing
seemingly unrelevant footnote about git-ssh-{fetch,upload}.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
for-each-ref: fix off by one read.
git-branch: remove mention of non-existent '-b' option
git-svn: prevent dcommitting if the index is dirty.
Fix memory leak in traverse_commit_list
This looks like a cut and paste error from the git-checkout
explanation of --no-track.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some uses of git-rev-list are to run it with --objects to see if
a range of objects between two or more commits is fully connected
or not. In such a case the caller doesn't care about the actual
object names or hash hints so formatting this data only for it to
be dumped to /dev/null by a redirect is a waste of CPU time. If
all the caller needs is the exit status then --quiet can be used
to bypass the commit and object formatting.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Old commit walkers other than http/curl transport have been removed
for some time now. Remove their documents.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it possible to mark commands that are deprecated in the
command list of the primary manual page git(7), and uses it to
mark "git lost-found" and "git tar-tree" as deprecated.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Start preparing for 1.5.3.6
git-send-email: Change the prompt for the subject of the initial message.
SubmittingPatches: improve the 'Patch:' section of the checklist
instaweb: Minor cleanups and fixes for potential problems
stop t1400 hiding errors in tests
Makefile: add missing dependency on wt-status.h
refresh_index_quietly(): express "optional" nature of index writing better
Fix sed string regex escaping in module_name.
Avoid a few unportable, needlessly nested "...`...".
git-mailsplit: with maildirs not only process cur/, but also new/
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There were 2 items "send patch to..." but having different set of
addresses to send patch to. Merge them together and move the resulting
item to the end of checklist.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fsck" learnt the option "--lost-found" in v1.5.3-rc0~5, to make
"git lost-found" obsolete. It is time to deprecate "git lost-found".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if our code is quite a good documentation for our coding style,
some people seem to prefer a document describing it.
The part about the shell scripts is clearly just copied from one of
Junio's helpful mails, and some parts were added from comments by
Junio, Andreas Ericsson and Robin Rosenberg.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many git commands have a -q option to suppress output to stdout, let's
have it for git-reset too.
This was asked for by Joey Hess through
http://bugs.debian.org/444933
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes the clean.requireForce configuration default to true.
Too many people are burned by typing "git clean" by mistake when
they meant to say "make clean".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format.numbered is a tri-state variable. Boolean values enable or
disable numbering by default and "auto" enables number when outputting
more than one patch.
--no-numbered (short: -N) will disable numbering.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fixing path quoting in git-rebase
Remove unecessary hard-coding of EDITOR=':' VISUAL=':' in some test suites.
Documentation: quote commit messages consistently.
Remove escaping of '|' in manpage option sections
* ph/parseopt: (24 commits)
gc: use parse_options
Fixed a command line option type for builtin-fsck.c
Make builtin-pack-refs.c use parse_options.
Make builtin-name-rev.c use parse_options.
Make builtin-count-objects.c use parse_options.
Make builtin-fsck.c use parse_options.
Update manpages to reflect new short and long option aliases
Make builtin-for-each-ref.c use parse-opts.
Make builtin-symbolic-ref.c use parse_options.
Make builtin-update-ref.c use parse_options
Make builtin-revert.c use parse_options.
Make builtin-describe.c use parse_options
Make builtin-branch.c use parse_options.
Make builtin-mv.c use parse-options
Make builtin-rm.c use parse_options.
Port builtin-add.c to use the new option parser.
parse-options: allow callbacks to take no arguments at all.
parse-options: Allow abbreviated options when unambiguous
Add shortcuts for very often used options.
parse-options: make some arguments optional, add callbacks.
...
Conflicts:
Makefile
builtin-add.c
Documentation quotes commit messages 14 times with double-quotes, and 7
times with single-quotes. The patch turns everything to double-quotes.
A nice side effect is that documentation becomes more Windoze-friendly
as AFAIK single quotes won't work there.
Signed-off-by: Sergei Organov <osv@javad.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The escaped were ending up verbatim in the generated documentation.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a good idea to use pack index version 2 all the time since it has
proper protection against propagation of certain pack corruptions when
repacking which is not possible with index version 1, as demonstrated
in test t5302.
Hence this config option.
The default is still pack index version 1.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-format-patch.txt: fix explanation of an example.
git-filter-branch.txt: fix a typo.
git-clone.txt: Improve --depth description.
gitweb: Update config file example for snapshot feature in gitweb/INSTALL
git-diff.txt includes diff-options.txt which for the -p option refers
to a section "generating patches.." which is missing from the git-diff
documentation. This patch adapts diff-format.txt to additionally
mention the git-diff program, and includes diff-format.txt into
git-diff.txt.
Tino Keitel noticed this problem.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Sergei Organov <osv@javad.com>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* sp/mergetool:
mergetool: avoid misleading message "Resetting to default..."
mergetool: add support for ECMerge
mergetool: use path to mergetool in config var mergetool.<tool>.path
* maint:
Update GIT 1.5.3.5 Release Notes
git-rebase--interactive.sh: Make 3-way merge strategies work for -p.
git-rebase--interactive.sh: Don't pass a strategy to git-cherry-pick.
Fix --strategy parsing in git-rebase--interactive.sh
Make merge-recursive honor diff.renamelimit
cherry-pick/revert: more compact user direction message
core-tutorial: Use new syntax for git-merge.
git-merge: document but discourage the historical syntax
Prevent send-pack from segfaulting (backport from 'master')
Documentation/git-cvsexportcommit.txt: s/mgs/msg/ in example
Conflicts:
git-rebase--interactive.sh
* cc/skip:
Bisect: add "skip" to the short usage string.
Bisect run: "skip" current commit if script exit code is 125.
Bisect: add a "bisect replay" test case.
Bisect: add "bisect skip" to the documentation.
Bisect: refactor "bisect_{bad,good,skip}" into "bisect_state".
Bisect: refactor some logging into "bisect_write".
Bisect: refactor "bisect_write_*" functions.
Bisect: implement "bisect skip" to mark untestable revisions.
Bisect: fix some white spaces and empty lines breakages.
rev-list documentation: add "--bisect-all".
rev-list: implement --bisect-all
This has been proposed for a few times without much reaction
from the list. Actually remove it to see who screams.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Historically "git merge" took its command line arguments in a
rather strange order. Document the historical syntax, and also
document clearly that it is not encouraged in new scripts.
There is no reason to deprecate the historical syntax, as the
current code can sanely tell which syntax the caller is using,
and existing scripts by people do use the historical syntax.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
RelNotes-1.5.3.5: describe recent fixes
merge-recursive.c: mrtree in merge() is not used before set
sha1_file.c: avoid gcc signed overflow warnings
Fix a small memory leak in builtin-add
honor the http.sslVerify option in shell scripts
No longer talk about Cogito since it's deprecated. Some scripts (such as
git-reset or git-branch) have undergone builtinification so adjust the text
to reflect this.
Fix a typo in the description of git-show-branch (merges are indicated by a
`-', not by a `.').
git-pull/git-push do not seem to use the dumb git-ssh-fetch/git-ssh-upload
(the text was probably missing a word).
Adjust a link that wasn't rendered properly because it was wrapped.
Signed-off-by: Benoit Sigoure <tsuna@lrde.epita.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually you cannot revert a merge because you do not know which
side of the merge should be considered the mainline (iow, what
change to reverse).
With this patch, cherry-pick and revert learn -m (--mainline)
option that lets you specify the parent number (starting from 1)
of the mainline, so that you can:
git revert -m 1 $merge
to reverse the changes introduced by the $merge commit relative
to its first parent, and:
git cherry-pick -m 2 $merge
to replay the changes introduced by the $merge commit relative
to its second parent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is incompatible with previous versions because an exit code
of 125 used to mark current commit as "bad". But hopefully this exit
code is not much used by test scripts or other programs. (126 and 127
are used by POSIX compliant shells to mean "found but not
executable" and "command not found", respectively.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also fix "bisect bad" and "bisect good" short usage description.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/fetch-pack: (60 commits)
Define compat version of mkdtemp for systems lacking it
Avoid scary errors about tagged trees/blobs during git-fetch
fetch: if not fetching from default remote, ignore default merge
Support 'push --dry-run' for http transport
Support 'push --dry-run' for rsync transport
Fix 'push --all branch...' error handling
Fix compilation when NO_CURL is defined
Added a test for fetching remote tags when there is not tags.
Fix a crash in ls-remote when refspec expands into nothing
Remove duplicate ref matches in fetch
Restore default verbosity for http fetches.
fetch/push: readd rsync support
Introduce remove_dir_recursively()
bundle transport: fix an alloc_ref() call
Allow abbreviations in the first refspec to be merged
Prevent send-pack from segfaulting when a branch doesn't match
Cleanup unnecessary break in remote.c
Cleanup style nit of 'x == NULL' in remote.c
Fix memory leaks when disconnecting transport instances
Ensure builtin-fetch honors {fetch,transfer}.unpackLimit
...
Some projects prefer to receive patches via a given email address.
In these cases, it's handy to configure that address once.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword the first sentence of the description of -x, in order to
make it easier to read and understand.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Describe more 1.5.3.5 fixes in release notes
Fix diffcore-break total breakage
Fix directory scanner to correctly ignore files without d_type
Improve receive-pack error message about funny ref creation
fast-import: Fix argument order to die in file_change_m
git-gui: Don't display CR within console windows
git-gui: Handle progress bars from newer gits
git-gui: Correctly report failures from git-write-tree
gitk.txt: Fix markup.
send-pack: respect '+' on wildcard refspecs
git-gui: accept versions containing text annotations, like 1.5.3.mingw.1
git-gui: Don't crash when starting gitk from a browser session
git-gui: Allow gitk to be started on Cygwin with native Tcl/Tk
git-gui: Ensure .git/info/exclude is honored in Cygwin workdirs
git-gui: Handle starting on mapped shares under Cygwin
git-gui: Display message box when we cannot find git in $PATH
git-gui: Avoid using bold text in entire gui for some fonts
For the manpage, avoid generating an em dash in code.
Signed-off-by: Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Further 1.5.3.5 fixes described in release notes
Avoid invoking diff drivers during git-stash
attr: fix segfault in gitattributes parsing code
Define NI_MAXSERV if not defined by operating system
Ensure we add directories in the correct order
Avoid scary errors about tagged trees/blobs during git-fetch
This patch tries to make the description of --auto a little
more clear for new users, especially those referred by the
"git-gc --auto" notification message.
It also cleans up some grammatical errors and typos in the
original description, as well as rewording for clarity.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that git-gc --auto tells the user to look at the man
page, it makes sense to mention the auto behavior near the
top (since this is likely to be most users' first exposure
to git-gc).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This commit adds a mechanism to provide absolute paths to the
external programs called by 'git mergetool'. A path can be
specified in the configuation variable mergetool.<tool>.path.
The configuration variable is similar to how we name branches
and remotes. It is extensible if we need to specify more details
about a tool.
The mechanism is especially useful on Windows, where external
programs are unlikely to be in PATH.
[sp: Fixed a few minor issues prior to applying]
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Yet more 1.5.3.5 fixes mentioned in release notes
cvsserver: Use exit 1 instead of die when req_Root fails.
git-blame shouldn't crash if run in an unmerged tree
git-config: print error message if the config file cannot be read
fixing output of non-fast-forward output of post-receive-email
* maint:
Document additional 1.5.3.5 fixes in release notes
Avoid 'expr index' on Mac OS X as it isn't supported
filter-branch: update current branch when rewritten
fix filter-branch documentation
helpful error message when send-pack finds no refs in common.
Fix setup_git_directory_gently() with relative GIT_DIR & GIT_WORK_TREE
Correct typos in release notes for 1.5.3.5
The man page for filter-branch still talked about writing the result
to the branch "newbranch". This is hopefully the last place where the
old behaviour was described.
Noticed by Bill Lear.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-rebase uses format-patch's --ignore-if-in-upstream
option, but we never document the user-visible behavior. The
example is placed near the top of the example list rather
than at the bottom because it is:
a. a simple example
b. a reasonably common scenario for many projects (mail
some patches which get accepted upstream, then rebase)
[sp: Corrected direction of 'HEAD..<upstream>' set comparsion]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Added a new section beneath "On Automatic following" called "On
Backdating Tags". This includes an explanation of when to use this
method, a brief explanation of the kind of date that can be used in
GIT_AUTHOR_DATE, and an example invocation of git-tag using a custom
setting of GIT_AUTHOR_DATE.
[sp: Corrected s/you/your/, noticed by Jeff King]
Signed-off-by: Michael W. Olson <mwolson@gnu.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If the end-user requested a dry-run push we need to pass that flag
over to http-push and additionally make sure it does not actually
upload any changes to the remote server.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
There's a number of tricky conflicts between master and
this topic right now due to the rewrite of builtin-push.
Junio must have handled these via rerere; I'd rather not
deal with them again so I'm pre-merging master into the
topic. Besides this topic somehow started to depend on
the strbuf series that was in next, but is now in master.
It no longer compiles on its own without the strbuf API.
* master: (184 commits)
Whip post 1.5.3.4 maintenance series into shape.
Minor usage update in setgitperms.perl
manual: use 'URL' instead of 'url'.
manual: add some markup.
manual: Fix example finding commits referencing given content.
Fix wording in push definition.
Fix some typos, punctuation, missing words, minor markup.
manual: Fix or remove em dashes.
Add a --dry-run option to git-push.
Add a --dry-run option to git-send-pack.
Fix in-place editing functions in convert.c
instaweb: support for Ruby's WEBrick server
instaweb: allow for use of auto-generated scripts
Add 'git-p4 commit' as an alias for 'git-p4 submit'
hg-to-git speedup through selectable repack intervals
git-svn: respect Subversion's [auth] section configuration values
gtksourceview2 support for gitview
fix contrib/hooks/post-receive-email hooks.recipients error message
Support cvs via git-shell
rebase -i: use diff plumbing instead of porcelain
...
Conflicts:
Makefile
builtin-push.c
rsh.c
Just for consistency, use the spelling URL everywhere.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If I'm handed a file, then it typically lives outside the
working directory. git-log only operates on in-tree files,
so the first 'filename' should be an in-tree one, or it should
look at all files. This patch does the latter, so it would
also find renamed files. However, it is also slower.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Make the definition of push in the glossary readable.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
em dashes were used inconsistently in the manual.
This changes them to the way they are used in US English.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
The default behaviour of git-push is potentially confusing
for new users, since it will push changes that are not on
the current branch. Publishing patches that were still
cooking on a development branch is hard to undo.
It would also be nice to be able to verify the expansion
of refspecs if you've edited them, so that you know
what branches matched on the server.
Adding a --dry-run flag allows the user to experiment
safely and learn how to use git-push properly. Originally
suggested by Steffen Prohaska.
Signed-off-by: Brian Ewins <brian.ewins@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Implement support for --dry-run, so that it can be used
in calls from git-push. With this flag set, git-send-pack
will not send any updates to the server.
Signed-off-by: Brian Ewins <brian.ewins@gmail.com>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
running the webrick server with git requires Ruby and Ruby's YAML and
Webrick libraries (both of which come standard with Ruby). nice for
single-user standalone invocations.
the --httpd=webrick option generates a ruby script on the fly to read
httpd.conf options and invoke the web server via library call. this
script is placed in the .git/gitweb directory. it also generates a
shell script in a feeble attempt to invoke ruby in a portable manner,
which assumes that 'ruby' is in the user's $PATH.
Signed-off-by: Mike Dalessio <mike@csa.net>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* lh/merge:
git-merge: add --ff and --no-ff options
git-merge: add support for --commit and --no-squash
git-merge: add support for branch.<name>.mergeoptions
git-merge: refactor option parsing
git-merge: fix faulty SQUASH_MSG
Add test-script for git-merge porcelain
* jc/autogc:
git-gc --auto: run "repack -A -d -l" as necessary.
git-gc --auto: restructure the way "repack" command line is built.
git-gc --auto: protect ourselves from accumulated cruft
git-gc --auto: add documentation.
git-gc --auto: move threshold check to need_to_gc() function.
repack -A -d: use --keep-unreachable when repacking
pack-objects --keep-unreachable
Export matches_pack_name() and fix its return value
Invoke "git gc --auto" from commit, merge, am and rebase.
Implement git gc --auto
* ap/dateformat:
Add a test script for for-each-ref, including test of date formatting
dateformat: parse %(xxdate) %(yydate:format) correctly
Make for-each-ref's grab_date() support per-atom formatting
Make for-each-ref allow atom names like "<name>:<something>"
parse_date_format(): convert a format name to an enum date_mode
The documentation used to say what the option does, but it
didn't mention a use case.
Signed-off-by: Federico Mena Quintero <federico@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There was an 'l' (ell) instead of a '1' (one) in one of the gitlinks.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Whip post 1.5.3.3 maintenance series into shape.
git stash: document apply's --index switch
post-receive-hook: Remove the From field from the generated email header so that the pusher's name is used
* maint:
git-remote: exit with non-zero status after detecting errors.
rebase -i: squash should retain the authorship of the _first_ commit
git-add--interactive: Improve behavior on bogus input
git-add--interactive: Allow Ctrl-D to exit
It was determined on the mailing list, that it makes more sense for a
"squash" to keep the author of the first commit as the author for the
result of the squash.
Make it so.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Updated post-checkout hook to take a flag specifying whether the checkout is
a branch checkout or a file checkout (from the index).
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
grab_date() gets an extra parameter - atomname; this extra parameter is
checked to see if it has a ":<format>" extra component in it, and if so
that "<format>" string is passed to parse_date_format() to produce an
enum date_mode value which is then further passed to show_date().
In short it allows the user of git-for-each-ref to do things like this:
$ git-for-each-ref --format='%(taggerdate:default)' refs/tags/v1.5.2
Sun May 20 00:30:42 2007 -0700
$ git-for-each-ref --format='%(taggerdate:relative)' refs/tags/v1.5.2
4 months ago
$ git-for-each-ref --format='%(taggerdate:short)' refs/tags/v1.5.2
2007-05-20
$ git-for-each-ref --format='%(taggerdate:local)' refs/tags/v1.5.2
Sun May 20 08:30:42 2007
$ git-for-each-ref --format='%(taggerdate:iso8601)' refs/tags/v1.5.2
2007-05-20 00:30:42 -0700
$ git-for-each-ref --format='%(taggerdate:rfc2822)' refs/tags/v1.5.2
Sun, 20 May 2007 00:30:42 -0700
The default, when no ":<format>" is specified is ":default", leaving the
existing behaviour unchanged.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Multiple commands were displayed in one line, making the manpage hard to read.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am used "git apply -z --index-info" to find the original versions
of the files touched by the diff, to be able to do an inexpensive
three-way merge.
This operation makes only sense in a repository, since the index
information in the diff refers to blobs, which have to be present in
the current repository.
Therefore, teach "git apply" a mode to write out the result as an
index file to begin with, obviating the need for scripts to do it
themselves.
The sole user for --index-info is "git am" is converted to
use --build-fake-ancestor in this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can use --smtp-server-port option to specify a port
different from the default (typically, SMTP servers listen
to smtp port 25 and ssmtp port 465).
Users should be aware that sending auth info over non-ssl
connections may be unsafe or just may not work at all
depending on SMTP server config.
Signed-off-by: Glenn Rempe <glenn@rempe.us>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The tinyurl is incorrect -- it attempts to go to groups.osdl.org,
which is gone. Either use the full URL (in patch) or create a new
tinyurl for this URL.
Is the web page (where I first saw this problem) generated from
this txt file?
http://www.kernel.org/pub/software/scm/git/docs/core-tutorial.html
If not, it needs to be updated also.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description was meant to emphasizes that the project should remain
usable even if the filter driver was not used. This makes it more explicit
and removes the "here is rope to hang yourself" paraphrase.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The order in which 'ident' and 'crlf' are carried out is documented a few paragraphs
later again, after 'filter' was introduced.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
convert-objects was needed to convert from an old-style repository,
which hashed the compressed contents and used a different date format.
Such repositories are presumably no longer common and, if such
conversions are necessary, should be done by writing a frontend for
git-fast-import.
Linus, the original author, is OK with moving it to contrib.
Signed-off-by: Matt Kraai <kraai@ftbfs.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Rework the introduction to the Submodules section to explain why
someone would use them, and fix up submodule references from the
tree-object and todo sections.
Signed-off-by: Michael Smith <msmith@cbnco.com>
Acked-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows a subproject's location to be specified and stored as relative
to the parent project's location (e.g., ./foo, or ../foo). This url is
stored in .gitmodules as given. It is resolved into an absolute url by
appending it to the parent project's url when the information is written
to .git/config (i.e., during submodule add for the originator, and
submodule init for a downstream recipient). This allows cloning of the
project to work "as expected" if the project is hosted on a different
server than when the subprojects were added.
Signed-off-by: Mark Levedahl <mdl123@verizon.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These new options can be used to control the policy for fast-forward
merges: --ff allows it (this is the default) while --no-ff will create
a merge commit.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These options can be used to override --no-commit and --squash, which is
needed since --no-commit and --squash now can be specified as default merge
options in $GIT_DIR/config.
The change also introduces slightly different behavior for --no-commit:
when specified, it explicitly overrides --squash. Earlier,
'git merge --squash --no-commit' would result in a squashed merge (i.e. no
$GIT_DIR/MERGE_HEAD was created) but with this patch the command will
behave as if --squash hadn't been specified.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enables per branch configuration of merge options. Currently, the most
useful options to specify per branch are --squash, --summary/--no-summary
and possibly --strategy, but all options are supported.
Note: Options containing whitespace will _not_ be handled correctly. Luckily,
the only option which can include whitespace is --message and it doesn't
make much sense to give that option a default value.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-svn: don't attempt to spawn pager if we don't want one
Supplant the "while case ... break ;; esac" idiom
User Manual: add a chapter for submodules
user-manual: don't assume refs are stored under .git/refs
Detect exec bit in more cases.
Conjugate "search" correctly in the git-prune-packed man page.
Move the paragraph specifying where the .idx and .pack files should be
Documentation/git-lost-found.txt: drop unnecessarily duplicated name.
Signed-off-by: Michael Smith <msmith@cbnco.com>
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The scripts taken from Tony Luck's howto assume all refs can be found
under .git/refs, but this is not necessarily true, especially since
git-gc runs git-pack-refs.
Also add a note warning of this in the chapter that introduces refs, and
fix the same incorrect assumption in one other spot.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
I only did this back when I wanted to make sure git-log and gitk work
properly with non Occidental characters. There is really no reason to
keep it around.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Thanks to Johannes Schindelin for review and fixes, and Julian
Phillips for the original C translation.
This changes a few small bits of behavior:
branch.<name>.merge is parsed as if it were the lhs of a fetch
refspec, and does not have to exactly match the actual lhs of a
refspec, so long as it is a valid abbreviation for the same ref.
branch.<name>.merge is no longer ignored if the remote is configured
with a branches/* file. Neither behavior is useful, because there can
only be one ref that gets fetched, but this is more consistant.
Also, fetch prints different information to standard out.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-am used "git apply -z --index-info" to find the original versions
of the files touched by the diff, to be able to do an inexpensive
three-way merge.
This operation makes only sense in a repository, since the index
information in the diff refers to blobs, which have to be present in
the current repository.
Therefore, teach "git apply" a mode to write out the result as an
index file to begin with, obviating the need for scripts to do it
themselves.
The sole user for --index-info is "git am" is converted to
use --build-fake-ancestor in this patch.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usage info is emebed in the script, but the gist of it is to run the script
from a pre-commit hook to save permissions/ownership data to a file and check
that file into the repository. Then, a post_merge hook reads the file and
updates working tree permissions/ownership. All updates are transparent to
the user (although there is a --verbose option). Merge conflicts are handled
in the "read" phase (in pre-commit), and the script aborts the commit and
tells you how to fix things in the case of a merge conflict in the metadata
file. This same idea could be extended to handle file ACLs or other file
metadata if desired.
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The post-merge hook enables one to hook in for `git pull` operations in order
to check and/or change attributes of a work tree from the hook. As an example,
it can be used in combination with a pre-commit hook to save/restore file
ownership and permissions data (or file ACLs) within the repository and
transparently update the working tree after a `git pull` operation.
Signed-off-by: Josh England <jjengla@sandia.gov>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Fixed update-hook example allow-users format.
Documentation/git-svn: updated design philosophy notes
t/t4014: test "am -3" with mode-only change.
Fix lapsus in builtin-apply.c
git-push: documentation and tests for pushing only branches
git-svnimport: Use separate arguments in the pipe for git-rev-parse
The example provided with the update-hook-example does not work on
either bash 2.05b.0(1)-release nor 3.1.17(1)-release. The matcher did
not match the lines that it advertised to match, such as:
refs/heads/bw/ linus
refs/heads/tmp/* *
In POSIX 1003.2 regular expressions, the star (*), is not an wildcard
meaning "match everything", it matches 0 or more matches of the atom
preceding it.
So to match "refs/heads/bw/topic-branch", the matcher should be written
as "refs/heads/bw/.*" to match "refs/heads/bw/" and everything after it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This section has not been updated in a while and
--branches/--tags/--trunk options are commonly used nowadays.
Noticed-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 098e711e caused git-push to match only branches when
considering which refs to push. This patch updates the
documentation accordingly and adds a test for this behavior.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "git-gc --auto" to consolidate many packs into one
without losing unreachable objects in them by using "repack -A"
when there are too many packfiles that are not marked with *.keep
in the repository. gc.autopacklimit configuration can be used
to set the maximum number of packs a repository is allowed to
have before this mechanism kicks in.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-apply: fix whitespace stripping
apply --index-info: fall back to current index for mode changes
core-tutorial: minor cleanup
documentation: replace Discussion section by link to user-manual chapter
user-manual: todo updates and cleanup
user-manual: fix introduction to packfiles
user-manual: move packfile and dangling object discussion
user-manual: rewrite object database discussion
user-manual: reorder commit, blob, tree discussion
user-manual: rewrite index discussion
user-manual: create new "low-level git operations" chapter
user-manual: rename "git internals" to "git concepts"
user-manual: move object format details to hacking-git chapter
user-manual: adjust section levels in "git internals"
revision walker: --cherry-pick is a limited operation
git-sh-setup: typofix in comments
Revise the introduction for concision, add pointers to the tutorial and
user manual as appropriate, delete cvsimport note from the end, as that
work's been done elsewhere already.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The "Discussion" section has a lot of useful information, but is a
little wordy, especially for an already-long man page, and is designed
for an audience more of potential git hackers than users, which probably
doesn't make as much sense as git matures. Also, I (perhaps foolishly)
forked a version in the user manual, which has been significantly
rewritten in an attempt to address some of the above problems.
So, remove this section and replace it by a (very terse) summary of the
original material--my attempt at the World's Shortest Git Overview--and
a reference to the appropriate chapter of the user manual. It's
unfortunate to remove something that's been in this place for a long
time, as some people may still depend on finding it there. But I think
we'll want to do this some day anyway.
Cc: Andreas Ericsson <ae@op5.se>
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Actually I don't think we've previously mentioned .git/objects, so we
need a different introduction here.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Rewrite the introduction. Rewrite each section completely to make them
work in the new order, to add some examples, and to move plumbing
commands (like git-commit-tree) to the following chapter.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The bottom-up blog, tree, commit order makes sense unless you want to
give explicit examples--it's easier to discover objects to examine if
you go in the other order....,
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Add an example using git-ls-files, standardize on the new "index"
terminology (as opposed to "cache"), attempt to clarify discussion and
make it a little shorter, avoid some unnecessary jargon ("write-back
cache").
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The low-level index operations aren't as important to regular users as
the rest of this "git concepts" chapter; so move it into a separate
chapter, and do some minor cleanup.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
"git internals" sounds like something only git developers must know
about, but this stuff should be of wider interest. Rename the chapter
and give it a slightly friendlier introduction.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The descriptions of the various object types should all be a subsection
of the "Object Database" section.
I cribbed most of this chapter from the README (now core-intro.txt and
git(7)), because there's stuff in there people need to know and I was
too lazy to rewrite it. The audience isn't quite right, though--the
chapter is a mixture of user- and developer- level documentation that
isn't as appropriate now as it was originally.
So, reserve this chapter for stuff users need to know, and move the
source code introduction into a new "git hacking" chapter where we'll
also move any hacker-only technical details.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
* jc/partial-remove:
Document ls-files --with-tree=<tree-ish>
git-commit: partial commit of paths only removed from the index
git-commit: Allow partial commit of file removal.
* jc/grep-c:
Split grep arguments in a way that does not requires to add /dev/null.
Documentation/git-config.txt: AsciiDoc tweak to avoid leading dot
Add test to check recent fix to "git add -u"
Documentation/git-archive.txt: a couple of clarifications.
Fix the rename detection limit checking
diff --no-index: do not forget to run diff_setup_done()
Bram Schoenmakers noticed that git-config document was formatted
incorrectly. Depending on the version of AsciiDoc and docbook
toolchain, it is sometimes taken as a numbered example by AsciiDoc,
some other times passed intact to roff format to confuse "man".
Since we refer to the repository metadata directory as $GIT_DIR
elsewhere, work it around by using that symbolic name.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The description of the option gave impression that there
were several formats available by using three dots. There are
no other formats than tar and gzip currently supported.
Clarify that the archive goes to the standard output.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-format-patch --in-reply-to: accept <message@id> with angle brackets
git-add -u: do not barf on type changes
Remove duplicate note about removing commits with git-filter-branch
git-clone: improve error message if curl program is missing or not executable
hooks--update: Explicitly check for all zeros for a deleted ref.
A duplicate of an already existing section in the documentation of
git-filter-branch was added in commit
f95eef15f2.
This patch removes that redundant section.
Signed-off-by: Ulrik Sverdrup <ulrik.sverdrup@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/archive:
archive - leakfix for format_subst()
Define NO_MEMMEM on Darwin as it lacks the function
archive: rename attribute specfile to export-subst
archive: specfile syntax change: "$Format:%PLCHLDR$" instead of just "%PLCHLDR" (take 2)
add memmem()
Remove unused function convert_sha1_file()
archive: specfile support (--pretty=format: in archive files)
Export format_commit_message()
* sp/maint-no-thin:
Make --no-thin the default in git-push to save server resources
fix doc for --compression argument to pack-objects
git-tag -s must fail if gpg cannot sign the tag.
Remove obsolete details (core.legacyheaders is always true now).
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds a --threads=<n> parameter to 'git pack-objects' with
documentation.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass --whitespace=<option> to git-apply. Since git-apply and git-am
expect this, I'm always surprised when I try to give it to git-rebase
and it doesn't work.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we're counting, a smaller number is 'fewer' not 'less'
Signed-off-by: Mike Ralphson <mike@abacus.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Junio and Johannes, change the name of the former
attribute specfile to export-subst to indicate its function rather
than purpose and to make clear that it is not applied to working tree
files.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As suggested by Johannes, --pretty=format: placeholders in specfiles
need to be wrapped in $Format:...$ now. This syntax change restricts
the expansion of placeholders and makes it easier to use with files
that contain non-placeholder percent signs.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Include a git-push example for creating a remote branch
Cleanup unnecessary file modifications in t1400-update-ref
Makefile: Add cache-tree.h to the headers list
Don't allow contrib/workdir/git-new-workdir to trash existing dirs
git-apply: do not read past the end of buffer
Many users get confused when `git push origin master:foo` works
when foo already exists on the remote repository but are confused
when foo doesn't exist as a branch and this form does not create
the branch foo.
This new example highlights the trick of including refs/heads/
in front of the desired branch name to create a branch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for a new attribute, specfile. Files marked as being
specfiles are expanded by git-archive when they are written to an
archive. It has no effect on worktree files. The same placeholders
as those for the option --pretty=format: of git-log et al. can be
used.
The attribute is useful for creating auto-updating specfiles. It is
limited by the underlying function format_commit_message(), though.
E.g. currently there is no placeholder for git-describe like output,
and expanded specfiles can't contain NUL bytes. That can be fixed
in format_commit_message() later and will then benefit users of
git-log, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the "--mirror" option to "git remote add", the refs will not
be stored in the refs/remotes/ namespace, but in the same location as
on the remote side.
This option probably only makes sense in a bare repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allows username and password to be given using --smtp-user
and --smtp-pass. SSL use is flagged by --smtp-ssl. These are
backed by corresponding defaults in the git configuration file.
This implements Junio's 'mail identity' suggestion in a slightly
more generalised manner. --identity=$identity, backed by
sendemail.identity indicates that the configuration subsection
[sendemail "$identity"] should take priority over the [sendemail]
section for all configuration values.
Signed-off-by: Douglas Stockwell <doug@11011.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HPA noticed that yum does not like the newer git RPM set; it turns out
that we do not ship git-p4 anymore but existing installations do not
realize the package is gone if we do not tell anything about it.
David Kastrup suggests using Obsoletes in the spec file of the new
RPM to replace the old package, so here is a try.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow port specification in ssh:// URLs in the
usual notation:
ssh://[user@]host.domain[:<port>]/<path>
This allows git to be used over ssh-tunneling
networks.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The warning message to suggest "Consider running git-status" from
"git-diff" that we experimented with during the 1.5.3 cycle turns
out to be a bad idea. It robbed cache-dirty information from people
who valued it, while still asking users to run "update-index --refresh".
It was hoped that the new behaviour would at least have some educational
value, but not showing the cache-dirty paths like before meant that the
user would not even know easily which paths were cache-dirty, and it
made the need to refresh the index look like even more unnecessary chore.
This commit reinstates the traditional behaviour, but with a twist.
By default, the empty "diff --git" output is totally squelched out
from "git diff" output. At the end of the command, it automatically
runs "update-index --refresh" as needed, without even bothering the
user. In other words, people who do not care about the cache-dirtyness
do not even have to see the warning.
The traditional behaviour to see the stat-dirty output and to bypassing
the overhead of content comparison can be specified by setting the
configuration variable diff.autorefreshindex to false.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this function, a commit filter can leave out unwanted commits
(such as temporary commits). It does _not_ undo the changeset
corresponding to that commit, but it _skips_ the revision. IOW
no tree object is changed by this.
If you like to commit early and often, but want to filter out all
intermediate commits, marked by "@@@" in the commit message, you can
now do this with
git filter-branch --commit-filter '
if git cat-file commit $GIT_COMMIT | grep '@@@' > /dev/null;
then
skip_commit "$@";
else
git commit-tree "$@";
fi' newbranch
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the convenience functions to the top of git-filter-branch.sh, and
return from the script when the environment variable SOURCE_FUNCTIONS is
set.
By sourcing git-filter-branch with that variable set automatically, all
commit filters may access the convenience functions like "map".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The interactive mode of rebase can be used to split commits. Tell the
interested parties about it, with a dedicated section in the man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some time ago, filter-branch's syntax changed so that more than one
ref can be rewritten at the same time. This involved the removal of
the ref name for the result; instead, the refs are rewritten in-place.
This updates the last leftovers in the documentation to reflect the
new behavior.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jari Aalto noticed a handful places in git-daemon documentation
that need to be improved.
* --inetd makes --pid-file to be ignored, in addition to --user
and --group
* receive-pack service was not described at all. We should, if
only to warn about the security implications of it.
* There was no example of per repository configuration.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As pointed out by Linus, these notations require the endpoints
given by the end user to be commits. Clarify.
Also, three-dots in AsciiDoc are turned into ellipses unless
quoted with bq. Be careful.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I think the trick with Git-side filename globbing is important and perhaps
not that well known. Clarify a bit in git-add documentation what it means.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We used to trigger the special case "things not in origin"
semantics only when one and only one positive ref is given, and
no number (e.g. "git format-patch -4 origin") was specified, and
used the general revision range semantics for everything else.
This narrows the special case a bit more, by making:
git format-patch --root this_version
to show everything that leads to the named commit.
More importantly, document the two different semantics better.
The generic revision range semantics came later and bolted on
without being clearly documented.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"GIT_DIR=some.where git --bare cmd" and worse yet
"git --git-dir=some.where --bare cmd" were very confusing. They
both ignored git-dir specified, and instead made $cwd as GIT_DIR.
This changes --bare not to override existing GIT_DIR.
This has been like this for a long time. Let's hope nobody sane
relied on this insane behaviour.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Options -d, -l, -v have already been explained in OPTIONS below.
Signed-off-by: Jari Aalto <jari.aalto@cante.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://linux-nfs.org/~bfields/git:
Documentation/user-manual.txt: fix a few omissions of gitlink commands.
user-manual: fix incorrect header level
user-manual: use pithier example commit
user-manual: introduce the word "commit" earlier
user-manual: minor editing for conciseness
user-manual: edit "ignoring files" for conciseness
Documentation/user-manual.txt: fix a few omissions of gitlink commands.
Actually, we should have a competition for the favorite example commit.
Criteria:
- length: one-line changes with one-line comments preferred,
and no long lines
- significance/memorability
- comic value
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
The immediate motivation for writing this section was to explain the
various places ignore patterns could be used. However, I still think
.gitignore is the case most people will want to learn about first. It
also makes it a bit more concrete to introduce ignore patterns in the
context of .gitignore first. And the existance of gitignore(5) relieves
the pressure to explain it all here.
So, stick to the .gitignore example, with only a brief mention of the
others, explain the syntax only by example, and leave the rest to
gitignore(5).
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Cc: Johan Herland <johan@herland.net>
The usage string for the executable was missing --refresh. In
addition, the documentation referred to "file", but the usage string
referred to "filepattern". Updated the documentation to
"filepattern", as git-add does handle patterns.
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When not referring to the cvs command, CVS makes more sense.
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --stdlayout option to git-svn init/clone initialises the default
Subversion values of trunk,tags,branches: -T trunk -b branches -t tags.
If any of the -T/-t/-b options are given in addition, they are given
preference.
[ew: fixed whitespace and added "-s" shortcut]
Signed-off-by: martin f. krafft <madduck@madduck.net>
Signed-off-by: Eric Wong <normalperson@yhbt.net>
As noted by Mike Hommey, the documentation for the config setting tar.umask
is not up-to-date. Commit f08b3b0e2e changed
the default from 0 to 2; this patch finally documents it.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Hopefully last rc of 1.5.3 cycle, except a few documentation and
message wording changes, and git-gui 0.8.2.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git-rev-parse manpage talks about the :$n:path notation (buried deep in
a list of other syntax) but it just says $n is a "stage number" -- someone
who is not familiar with the internals of git's merge implementation is
never going to be able to figure out that "1", "2", and "3" means.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --walk-reflogs logic and the --reverse logic are completely
incompatible with one another. Attempting to use both at the same
time leads to confusing results that sometimes violates the user's
formatting options or ignores the user's request to see the reflog
message and timestamp.
Unfortunately the implementation of both of these features is glued
onto the side of the revision walking machinary in such a way that
they are probably not going to be easy to make them compatible with
each other. Rather than offering the user confusing results we are
better off bailing out with an error message until such a time as
the implementations can be refactored to be compatible.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes it easier to find out how to enable the reflog
for a bare repository by searching the documentation for
"reflog".
Signed-off-by: Lukas Sandström <lukass@etek.chalmers.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To keep the change small, this is done by setting GIT_PAGER to "cat".
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default 'git reflog show' will show the reflog of 'HEAD' and not
the reflog of the current branch. This is most likely due to the
work done a while ago as part of the detached HEAD series to allow
HEAD to have its own reflog independent of each branch's reflog.
Since 'git reflog show' is really just an obscure alias for 'git
log -g --abbrev-commit --pretty=oneline' it should behave the same
way and its documentation should match.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The existing checkpoint command is very useful to force fast-import
to dump the branches out to disk so that standard Git tools can
access them and the objects they refer to. However there was not a
way to know when fast-import had finished executing the checkpoint
and it was safe to read those refs.
The progress command can be used to make fast-import output any
message of the frontend's choosing to standard out. The frontend
can scan for these messages using select() or poll() to monitor a
pipe connected to the standard output of fast-import.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
For the same reasons as the prior change we want to allow frontends
to omit the trailing LF that usually delimits commands. In some
cases these just make the input stream more verbose looking than
it needs to be, and its just simpler for the frontend developer to
get started if our parser is slightly more lenient about where an
LF is required and where it isn't.
To make this optional LF feature work we now have to buffer up to one
line of input in command_buf. This buffering can happen if we look
at the current input command but don't recognize it at this point
in the code. In such a case we need to "unget" the entire line,
but we cannot depend upon the stdio library to let us do ungetc()
for that many characters at once.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
A few fast-import frontend developers have found it odd that we
require the LF following a `data` command, especially in the exact
byte count format. Technically we don't need this LF to parse
the stream properly, but having it here does make the stream more
readable to humans. We can easily make the LF optional by peeking
at the next byte available from the stream and pushing it back into
the buffer if its not LF.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Several frontend developers have asked that some form of stream
comments be permitted within a fast-import data stream. This way
they can include information from their own frontend program about
where specific data was taken from in the source system, or about
a decision that their frontend may have made while creating the
fast-import data stream.
This change introduces comments in the Bourne-shell/Tcl/Perl style.
Lines starting with '#' are ignored, up to and including the LF.
Unlike the above mentioned three languages however we do not look for
and ignore leading whitespace. This just simplifies the definition
of the comment format and the code that parses them.
To make comments work we had to stop using read_next_command() within
cmd_data() and directly invoke read_line() during the inline variant
of the function. This is necessary to retain any lines of the
input data that might otherwise look like a comment to fast-import.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This new option allows an arbitrary "cmd" to generate per patch
file specific "Cc:"s.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As per http://marc.info/?l=git&m=118737219702802&w=2 , clarify
git-commit-tree documentation.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
- Remove "DESTBRANCH" from usage, as it rewrites the branches given.
- Remove an = from an example usage, as the script doesn't understand
it.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Apply "Subproject commit HEX" changes produced by git-diff.
As usual in the current git, only the superproject itself is actually
modified (possibly creating empty directories for new submodules).
Any checked-out submodule is left untouched and is not required to
be up-to-date.
With clean-ups from Junio C Hamano.
Signed-off-by: Sven Verdoolaege <skimo@kotnet.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this option git-log prints log message size
just before the corresponding message.
Porcelain tools could use this to speedup parsing
of git-log output.
Note that size refers to log message only. If also
patch content is shown its size is not included.
In case it is not possible to know the size upfront
size value is set to zero.
Signed-off-by: Marco Costalba <mcostalba@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows to refresh only a subset of the project files, based on
the specified pathspecs.
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If cmd-list.made has been created by a previous run as root, output
redirection to it will fail. So remove it before regeneration.
Signed-off-by: David Kastrup <dak@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cr/tag:
Teach "git stripspace" the --strip-comments option
Make verify-tag a builtin.
builtin-tag.c: Fix two memory leaks and minor notation changes.
launch_editor(): Heed GIT_EDITOR and core.editor settings
Make git tag a builtin.
These patches use docbook2x in order to create an info version of the
git user manual. No existing Makefile targets (including "all") are
touched, so you need to explicitly say
make info
sudo make install-info
to get git.info created and installed. If the info target directory
does not already contain a "dir" file, no directory entry is created.
This facilitates $(DESTDIR)-based installations. The same could be
achieved with
sudo make INSTALL_INFO=: install-info
explicitly.
perl is used for patching up sub-par file and directory information in
the Texinfo file. It would be cleaner to place the respective info
straight into user-manual.txt or the conversion configurations, but I
find myself unable to find out how to do this with Asciidoc/Texinfo.
Signed-off-by: David Kastrup <dak@gnu.org>
This attempts to force fixed-font in manpages for literal
blocks. I have tested this with docbook 1.71 and it seems to
work as expected.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hides the backslash at the end of line from AsciiDoc
toolchain by introducing a trailing whitespace on one line in an
illustration in git-rev-parse.txt.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic idea was proposed by Steve Hoelzer; in order to make
the list easier to search, we keep the command list in the
script that generates it with "sort -d".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The basic idea is from Mark Levedahl. I do not use GZ=1 nor
quick-install-doc myself (there obviously is a chicken-and-egg
issue with quick-install-doc for me).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These instructions tell you how to create a clone of a repository
created with git-svn, that can in turn be used with git-svn.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As with git-add, I think previous updates to the git-commit man page did
indeed help make it more user-friendly. But I think the banishment of
the word "index" from the description goes too far; reinstate its use,
to simplify some of the language slightly and smooth the transition to
other documentation.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'master' of git://linux-nfs.org/~bfields/git:
documentation: use the word "index" in the git-add manual page
user-manual: mention git-gui
user-manual: mention git stash
user-manual: update for new default --track behavior
