Just I am old fashioned. Source inclusion in bourne shell is
"." (dot), not "source" -- that's csh.
[jc: yes I know bash groks it, but I am old fashioned.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
This rewrites the result check code a bit. The earlier one
using awk was splitting columns at any whitespace, which
confused lines attributed incorrectly to the merge made by the
default author "A U Thor <author@example.com>" with lines
attributed to author "A".
The latest test by Ryan to add the "starting from older commit"
test is also included, with another older commit test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Sometimes it is convient for a Porcelain to be able to checkout all
unmerged files in all stages so that an external merge tool can be
executed by the Porcelain or the end-user. Using git-unpack-file
on each stage individually incurs a rather high penalty due to the
need to fork for each file version obtained. git-checkout-index -a
--stage=all will now do the same thing, but faster.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/rev-list:
setup_revisions(): handle -n<n> and -<n> internally.
git-log (internal): more options.
git-log (internal): add approxidate.
Rip out merge-order and make "git log <paths>..." work again.
Tie it all together: "git log"
Introduce trivial new pager.c helper infrastructure
git-rev-list libification: rev-list walking
Splitting rev-list into revisions lib, end of beginning.
rev-list split: minimum fixup.
First cut at libifying revlist generation
git-mv needs to be run from the base directory so that
the check if a file is under revision also covers files
outside of a subdirectory. Previously, e.g. in the git repo,
cd Documentation; git-mv ../README .
produced the error
Error: '../README' not under version control
The test is extended for this case; it previously only tested
one direction.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of sed lack the "-i" option.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Well, assuming breaking --merge-order is fine, here's a patch (on top of
the other ones) that makes
git log <filename>
actually work, as far as I can tell.
I didn't add the logic for --before/--after flags, but that should be
pretty trivial, and is independent of this anyway.
Signed-off-by: Junio C Hamano <junkio@cox.net>
New tests are added to the git-rm test case to cover this as well.
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a git-rm command which provides convenience similar to
git-add, (and a bit more since it takes care of the rm as well if
given -f).
Like git-add, git-rm expands the given path names through
git-ls-files. This means it only acts on files listed in the
index. And it does act recursively on directories by default, (no -r
needed as in the case of rm itself). When it recurses, it does not
remove empty directories that are left behind.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* fix:
git-push: Update documentation to describe the no-refspec behavior.
format-patch: pretty-print timestamp correctly.
git-add: Add support for --, documentation, and test.
This adds support to git-add to allow the common -- to separate
command-line options and file names. It adds documentation and a new
git-add test case as well.
[jc: this should apply to 1.2.X maintenance series, so I reworked
git-ls-files --error-unmatch test. ]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some versions of GNU make do not understand $(call), and have problems to
interpret rules like this:
some_target: CFLAGS += -Dsome=defs
[jc: simplified substitution a bit. ]
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In some setups (notably server setups) you do not need that dependency.
Gracefully handle the absence of python when NO_PYTHON is defined.
Signed-off-by: Johannes E. Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When git-reset --hard is used and a subdirectory becomes
empty (as it contains no tracked files in the target tree)
the empty subdirectory should be removed. This matches
the behavior of git-checkout-index and git-read-tree -m
which would not have created the subdirectory or would
have deleted it when updating the working directory.
Subdirectories which are not empty will be left behind.
This may happen if the subdirectory still contains object
files from the user's build process (for example).
[jc: simplified the logic a bit, while keeping the test script.]
FreeBSD 4.11 being one example: the built-in echo doesn't have -e,
and the installed /bin/echo does not do "-e" as well.
"printf" works, laking just "\e" and "\xAB'.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now pack-object is not as chatty when its stderr is not connected
to a terminal, so the test needs to be adjusted for that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Without these, running tests with an account with empty gecos
field would fail.
We might want to loosen error from "git-var -l" (but not
"git-var GIT_AUTHOR_NAME") later, but that is more or less an
independent issue.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It tried to "restore" GIT_AUTHOR_EMAIL environment variable but
the variable started out as unset, so ended up setting it to an
empty string. This is now caught as an error.
Signed-off-by: Junio C Hamano <junkio@cox.net>
- "git commit" without _any_ parameter keeps the traditional
behaviour. It commits the current index.
We commit the whole index even when this form is run from a
subdirectory.
- "git commit --include paths..." (or "git commit -i paths...")
is equivalent to:
git update-index --remove paths...
git commit
- "git commit paths..." acquires a new semantics. This is an
incompatible change that needs user training, which I am
still a bit reluctant to swallow, but enough people seem to
have complained that it is confusing to them. It
1. refuses to run if $GIT_DIR/MERGE_HEAD exists, and reminds
trained git users that the traditional semantics now needs
-i flag.
2. refuses to run if named paths... are different in HEAD and
the index (ditto about reminding). Added paths are OK.
3. reads HEAD commit into a temporary index file.
4. updates named paths... from the working tree in this
temporary index.
5. does the same updates of the paths... from the working
tree to the real index.
6. makes a commit using the temporary index that has the
current HEAD as the parent, and updates the HEAD with this
new commit.
- "git commit --all" can run from a subdirectory, but it updates
the index with all the modified files and does a whole tree
commit.
- In all cases, when the command decides not to create a new
commit, the index is left as it was before the command is
run. This means that the two "git diff" in the following
sequence:
$ git diff
$ git commit -a
$ git diff
would show the same diff if you abort the commit process by
making the commit log message empty.
This commit also introduces much requested --author option.
$ git commit --author 'A U Thor <author@example.com>'
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test depended on "sleep 1" to be enough to dirty the index
entry for a symlink. Alex noticed that on his Cygwin installation
"sleep 1" was sometimes not enough, and after further discussion with
Christopher Faylor, it was brought up that on FAT filesystem timestamp
granularity is 2 seconds so sleeping 1 second is not enough.
For now this patch takes an easy workaround of sleeping for 3 seconds.
Very strictly speaking, POSIX requires lstat to fill only S_IFMT part
of st_mode and st_size for symlinks, and depending on timestamp might
be considered a bug, but we depend on that anyway, so it is better to
test that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the character used to mark the commits that is on the
branch from '+' to '*' for the current branch, to make it stand out.
Also we show '-' for merge commits.
When you have a handful branches with relatively long diversion, it
is easier to see which one is the current branch this way.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In a repository with mainto/1.0 (to keep maintaining the 1.0.X
series) and fixo/1.0 (to keep fixes that apply to both 1.0.X
series and upwards) branches, "git-name-rev mainto/1.0" answered
just "1.0" making things ambiguous. Show refnames unambiguously
like show-branch does.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test exercises the standard feature that makes rebase useful.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test checks that git-cherry finds the expected number of patches
in two simple cases, and then tests the new limit arguments.
[jc: collapsed two patches into one and added sleep to make sure
the two commits would get different timestamps]
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
and was successfully entered. Otherwise git-init-db will create it directly
in the working directory (t/) which can be dangerous.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Move git-rev-list --merge-order usage check for 'OpenSSL not linked' after
test 1; we cannot trigger this unless we try to actually use --merge-order
by giving some ref, and we do not have any ref until we run the first test
to create commits.
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These tests seem to mean checking the output with expected
result, but was not doing its handrolled test helper function.
Also fix the guard to workaround wc output that have whitespace
padding, which was broken but not exposed because the test was
not testing it ;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch converts a stat() to an lstat() call, thereby fixing the case
when the date of a symlink was not the same as the one recorded in the
index. The included test case demonstrates this.
This is for the case that the symlink points to a non-existing file. If
the file exists, worse things than just an error message happen.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes found that the test has 1/256 chance of falsely
producing an uncorrupted idx file, causing the check to detect
corruption fail. Now we have 1/2^160 chance of false failure
;-).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Although pack-check.c had routine to verify the checksum for the
pack index file itself, the core did not check it before using
it.
This is stolen from the patch to tighten packname requirements.
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from 797bd6f490 commit)
Although pack-check.c had routine to verify the checksum for the
pack index file itself, the core did not check it before using
it.
This is stolen from the patch to tighten packname requirements.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes the way the case two branches rename the same path
to different paths is handled. Earlier, the code removed the
original path and added both destinations to the index at
stage0. This commit changes it to leave the original path at
stage1, and two destination paths at stage2 and stage3,
respectively.
[jc: I am not really sure if this makes much difference in the
real life merge situations. What should happen when our branch
renames A to B and M to N, while their branch renames A to M?
That is, M remains in our tree as is.]
Signed-off-by: Junio C Hamano <junkio@cox.net>
The previous round caught the most trivial case well, but broke
down once index file is updated again. Smudge problematic
entries (they should be very few if any under normal interactive
workflow) before writing a new index file out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This fixes the longstanding "Racy GIT" problem, which was pretty
much there from the beginning of time, but was first
demonstrated by Pasky in this message on October 24, 2005:
http://marc.theaimsgroup.com/?l=git&m=113014629716878
If you run the following sequence of commands:
echo frotz >infocom
git update-index --add infocom
echo xyzzy >infocom
so that the second update to file "infocom" does not change
st_mtime, what is recorded as the stat information for the cache
entry "infocom" exactly matches what is on the filesystem
(owner, group, inum, mtime, ctime, mode, length). After this
sequence, we incorrectly think "infocom" file still has string
"frotz" in it, and get really confused. E.g. git-diff-files
would say there is no change, git-update-index --refresh would
not even look at the filesystem to correct the situation.
Some ways of working around this issue were already suggested by
Linus in the same thread on the same day, including waiting
until the next second before returning from update-index if a
cache entry written out has the current timestamp, but that
means we can make at most one commit per second, and given that
the e-mail patch workflow used by Linus needs to process at
least 5 commits per second, it is not an acceptable solution.
Linus notes that git-apply is primarily used to update the index
while processing e-mailed patches, which is true, and
git-apply's up-to-date check is fooled by the same problem but
luckily in the other direction, so it is not really a big issue,
but still it is disturbing.
The function ce_match_stat() is called to bypass the comparison
against filesystem data when the stat data recorded in the cache
entry matches what stat() returns from the filesystem. This
patch tackles the problem by changing it to actually go to the
filesystem data for cache entries that have the same mtime as
the index file itself. This works as long as the index file and
working tree files are on the filesystems that share the same
monotonic clock. Files on network mounted filesystems sometimes
get skewed timestamps compared to "date" output, but as long as
working tree files' timestamps are skewed the same way as the
index file's, this approach still works. The only problematic
files are the ones that have the same timestamp as the index
file's, because two file updates that sandwitch the index file
update must happen within the same second to trigger the
problem.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When .git/refs/heads/frotz and .git/refs/tags/frotz existed, and
the object name stored in .git/refs/heads/frotz were corrupt, we
ended up picking tags/frotz without complaining. Worse yet, if
the corrupt .git/refs/heads/frotz was more than 40 bytes and
began with hexadecimal characters, it silently overwritten the
initial part of the returned result.
This commit adds a couple of tests to demonstrate these cases,
with a fix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If GIT_AUTHOR_EMAIL is of a certain form, `git rebase master' will blow
away the author name and email when fast-forward merging commits. I
have not tracked it down, but here is a testcase that demonstrates the
behavior.
Signed-off-by: Amos Waterland <apw@us.ibm.com>
Acked-by: Michal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In case some refs couldn't be pushed out due to an error (mostly the
not-a-proper-subset error), make git-send-pack exit with non-zero status
after the push is over (that is, it still tries to push out the rest
of the refs).
[jc: I adjusted a test for this change.]
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test kicks in only if you built test-delta executable, and
makes sure that the basic delta routine is working properly even
on empty files.
This commit is to make sure we have a test to catch the
breakage. The delitifier code is still broken, which will be
fixed with the next commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds a couple of tests to cover the following renaming
merge cases:
- one side renames and the other side does not, with and without
content conflicts.
- both side rename to the same path, with and without content
conflicts.
The test setup also prepares a case in which both side rename to
different destination, but currently the code collapses these
destination paths and removes the original path, which may be
wrong. The outcome of this case is not checked by the tests in
this round.
Signed-off-by: Junio C Hamano <junkio@cox.net>
People seem to be getting test failure from t6021 not becuase
git is faulty but because they forgot to install "merge". Check
this and other trivial pilot errors in the first test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is just a belts-and-suspenders check, but makes sure we
have both "git" and "git-init-db" built, executable, and
checking.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to catch an error where tests are run without first
building what are being tested. Relying on prefixing $PATH with
the build directory and expect that the PATH mechanism would
find what we just built would silently run an already installed
binaries from the PATH.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not everybody can rely on /bin/sh to be sane, and we support
SHELL_PATH for that. Use it.
mktemp(1) is not used anywhere else in the core git. Do not
introduce dependency on it.
Not everybody's "which" gives a sane return value. For example,
on Solaris 'which XXX' says "no XXX in /usr/bin /bin ..." and
exits with zero status. The lesson here is to never use 'which'
in your scripts.
Signed-off-by: Junio C Hamano <junkio@twinsun.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The test is considered OK if it exits with code $1
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano, Sat, Nov 26, 2005 03:45:52 +0100:
> I haven't seriously used git-mv myself, so
> somebody needs to test it, and if it actually works and Ack on
> it, please.
It actually works in subdirs.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The diff for this commit is a good illustration of what changed
in ls-tree behaviour.
- With -r, tree nodes themselves are not shown anymore, but
blobs in subtrees are shown.
- The order of paths parameters do not matter, since they are
not like arguments to /bin/ls, but are filter patterns.
- When filter patterns overlap, unintuitive things happen.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A .git/config like follows becomes valid with this patch:
[remote.junio]
url = git://git.kernel.org/pub/scm/git/git.git
pull = master:junio todo:todo +pu:pu
[remote.ibook]
url = ibook:git/
pull = master:ibook
push = master:quetzal
(This patch only does the ini file thing, git-fetch and friends still
ignore these values).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Extend the regex syntax of value_regex so that prepending an exclamation
mark means non-match:
[core]
quetzal = "Dodo" for Brainf*ck
quetzal = "T. Rex" for Malbolge
quetzal = "cat"
You can match the third line with
git-config-set --get quetzal '! for '
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
... namely
--replace-all, to replace any amount of matching lines, not just 0 or 1,
--get, to get the value of one key,
--get-all, the multivar version of --get, and
--unset-all, which deletes all matching lines from .git/config
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new option, --allow-binary-replacement, is introduced.
When you feed a diff that records full SHA1 name of pre- and
post-image blob on its index line to git-apply with this option,
the post-image blob replaces the path if what you have in the
working tree matches the pre-image _and_ post-image blob is
already available in the object directory.
Later we _might_ want to enhance the diff output to also include
the full binary data of the post-image, to make this more
useful, but this is good enough for local rebasing application.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Recently we fixed 'git-apply --stat' not to barf on a binary
differences. But it accidentally broke the error detection when
we actually attempt to apply them.
This commit fixes the problem and adds test cases.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The recently we updated rev-list --topo-order to show the heads
in date order, but we had a test that expected to see the old
behaviour.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make git-update-ref create references with slashes in them. git-branch
and git-checkout already support such reference names.
git-branch can use git-update-ref to create the references in a more
formal manner now.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because a batch-oriented script creates many commits within a second
on a fast machine, show-branch output of the test results are unstable
without topo-order.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Although it was shown that the "full contamination" was not really full
during the list discussion, the series improves things without incurring
extra parsing cost, and here is a test to check that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow failed tests to be ignored using make's "-i". The patch also
disables parallel make in t/. This doesn't make the testing any
different as before: the tests were run sequentially before.
It also allows to run more tests, ignoring the ones usually failing
just to figure out if something else broke. (Or to ignore plainly
uninteresting situations because of the testing being done on say...
cygwin ;)
Signed-off-by: Junio C Hamano <junkio@cox.net>
We checked the result of patch application for full permission bits,
when the only thing we cared about was to make sure the executable
bit was correctly set.
Noticed by Peter Baumann.
Signed-off-by: Junio C Hamano <junkio@cox.net>
