Print no space after the name of a key without value.
Otherwise keys without values are printed exactly the
same as keys with empty values.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a picture, and keep the setup and the tests together.
Signed-off-by: Sam Vilain <sam.vilain@catalyst.net.nz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original code did not take hierarchical branch names into account at all.
[jc: cherry-picked 11f68d9 from 'master']
Tested-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
[jc: cherry-picked 9f30855 from 'master']
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Although it is not advisable, we have always allowed a branch
and a tag to have the same basename (i.e. it is not illegal to
have refs/heads/frotz and refs/tags/frotz at the same time).
When talking about a specific commit, the interpretation of
'frotz' has always been "use tag and then check branch",
although we warn when ambiguities exist.
However "git checkout $name" is defined to (1) first see if it
matches the branch name, and if so switch to that branch; (2)
otherwise it is an instruction to detach HEAD to point at the
commit named by $name. We did not follow this definition when
$name appeared under both refs/heads/ and refs/tags/ -- we
switched to the branch but read the tree from the tagged commit,
which was utterly bogus.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The problem is visible when cloning a local repo. The cloned
repository will have the origin url setup incorrectly: the origin name
will be copied verbatim in origin url of the cloned repository.
Normally, the name is to be expanded into absolute path.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Encode ' ' using '=20' even though rfc2047 allows using '_' for
readability. Unfortunately, many programs do not understand this and
just leave the underscore in place. Using '=20' seems to work better.
[jc: with adjustment to t3901]
Signed-off-by: Kristian Høgsberg <hoegsberg@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test case would have caught the bug fixed by revision
c23290d5.
It puts various forms of $Id$ into a file in the repository,
without allowing git to collapse them to uniformity. Then enables the
$Id$ expansion on checkout, and checks that what is checked out has
coped with the various forms.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint-1.5.1:
Fix git-svn to handle svn not reporting the md5sum of a file, and test.
More echo "$user_message" fixes.
Add tests for the last two fixes.
git-commit: use printf '%s\n' instead of echo on user-supplied strings
git-am: use printf instead of echo on user-supplied strings
Documentation: Add definition of "evil merge" to GIT Glossary
Replace the last 'dircache's by 'index'
Documentation: Clean up links in GIT Glossary
This updates t4014 to check the two fixes for git-am and git-commit
we observed with "echo" that does backslash interpolation by default
without being asked with -e option.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When e8438420bb allowed us to reload
the marks table on subsequent runs of fast-import we really broke
things, as we set pack_id to MAX_PACK_ID for any objects we imported
into the marks table. Creating a branch from that mark should fail
as we attempt to read the object through a non-existant packed_git
pointer. Instead we have to use the normal Git object system to
locate the older commit, as we ourselves do not have a reference
to the packed_git it resides in.
This bug only occurred because t9300 was not complete enough.
When we added the --import-marks feature we didn't actually test
its implementation enough to verify the function worked as intended.
I have corrected that, and included the changes as part of this fix.
Prior versions of fast-import fail the new test(s); this commit
allows them to pass.
Credit for this bug find goes to Simon Hausmann <simon@lst.de> as
he recently identified a similiar bug in the tree lazy-loading path.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-add reads this variable, and honours the contents of that file if that
exists. Match this behaviour in git-status, too.
Noticed by Evan Carroll on IRC.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint-1.5.1:
annotate: make it work from subdirectories.
git-config: Correct asciidoc documentation for --int/--bool
t1300: Add tests for git-config --bool --get
unpack-trees.c: verify_uptodate: remove dead code
Use PATH_MAX instead of TEMPFILE_PATH_LEN
branch: fix segfault when resolving an invalid HEAD
Noticed that there were only tests for --int, but not
for --bool. Add some.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
$Id$ is present already in SVN and CVS; it would mean that people
converting their existing repositories won't have to make any changes to
the source files should they want to make use of the ident attribute.
Given that it's a feature that's meant to calm those very people, it
seems obtuse to make them edit every file just to make use of it.
I think that bzr uses $Id$; Mercurial has examples hooks for $Id$;
monotone has $Id$ on its wishlist. I can't think of a good reason not
to stick with the de-facto standard and call ours $Id$ instead of
$ident$.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-svn: don't attempt to minimize URLs by default
git-svn: fix segfaults due to initial SVN pool being cleared
git-svn: clean up caching of SVN::Ra functions
git-svn: don't drop the username from URLs when dcommit is run
RPM spec: include files in technical/ to package.
Remove stale non-static-inline prototype for tree_entry_extract()
git-config: test for 'do not forget "a.b.var" ends "a.var" section'.
git-config: do not forget seeing "a.b.var" means we are out of "a.var" section.
For tracking branches and tags, git-svn prefers to connect
to the root of the repository or at least the level that
houses branches and tags as well as trunk. However, users
that are accustomed to tracking a single directory have
no use for this feature.
As pointed out by Junio, users may not have permissions to
connect to connect to a higher-level path in the repository.
While the current minimize_url() function detects lack of
permissions to certain paths _after_ successful logins, it
cannot effectively determine if it is trying to access a
login-only portion of a repo when the user expects to
connect to a part where anonymous access is allowed.
For people used to the git-svnimport switches of
--trunk, --tags, --branches, they'll already pass the
repository root (or root+subdirectory), so minimize URL
isn't of too much use to them, either.
For people *not* used to git-svnimport, git-svn also
supports:
git svn init --minimize-url \
--trunk http://repository-root/foo/trunk \
--branches http://repository-root/foo/branches \
--tags http://repository-root/foo/tags
And this is where the new --minimize-url command-line switch
comes in to allow for this behavior to continue working.
You cannot currently checkout the tip of an existing branch
without moving to the branch.
This allows you to detach your HEAD and place it at such a
commit, with:
$ git checkout master^0
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-cvsserver has a bug in its configuration file output parser
that makes it choke if the configuration has these:
[diff]
color = auto
[diff.color]
whitespace = blue reverse
This needs to be fixed, but thanks to that bug, a separate bug
in t9400 test script was discovered. The test discarded
GIT_CONFIG instead of pointing at the proper one to be used in
the exoprted repository. This allowed user's .gitconfig and (if
exists) systemwide /etc/gitconfig to affect the outcome of the
test, which is a big no-no.
The patch fixes the problem in the test. Fixing the
git-cvsserver's configuration parser is left as an exercise to
motivated volunteers ;-)
Signed-off-by: Junio C Hamano <junkio@cox.net>
Rather than updating all working tree paths, we limit
ourselves to paths listed on the command line.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When switching from a branch with both x86_64/boot/Makefile and
i386/boot/Makefile to another branch that has x86_64/boot as a
symlink pointing at ../i386/boot, the code incorrectly removed
i386/boot/Makefile.
This was because we first removed everything under x86_64/boot
to make room to create a symbolic link x86_64/boot, then removed
x86_64/boot/Makefile which no longer exists but now is pointing
at i386/boot/Makefile, thanks to the symlink we just created.
This fixes it by using the has_symlink_leading_path() function
introduced previously for git-apply in the checkout codepath.
Earlier, "git checkout" was broken in t4122 test due to this
bug, and the test had an extra "git reset --hard" as a
workaround, which is removed because it is not needed anymore.
Signed-off-by: Junio C Hamano <junkio@cox.net>
HPA noticed that git-rebase fails when changes involve symlinks
in the middle of the hierarchy. Consider:
* The tree state before the patch is applied has arch/x86_64/boot
as a symlink pointing at ../i386/boot/
* The patch tries to remove arch/x86_64/boot symlink, and
create bunch of files there: .gitignore, Makefile, etc.
git-apply tries to be careful while applying patches; it never
touches the working tree until it is convinced that the patch
would apply cleanly. One of the check it does is that when it
knows a path is going to be created by the patch, it runs
lstat() on the path to make sure it does not exist.
This leads to a false alarm. Because we do not touch the
working tree before all the check passes, when we try to make
sure that arch/x86_64/boot/.gitignore does not exist yet, we
haven't removed the arch/x86_64/boot symlink. The lstat() check
ends up seeing arch/i386/boot/.gitignore through the
yet-to-be-removed symlink, and says "Hey, you already have a
file there, but what you fed me is a patch to create a new
file. I am not going to clobber what you have in the working
tree."
We have similar checks to see a file we are going to modify does
exist and match the preimage of the diff, which is done by
directly opening and reading the file.
For a file we are going to delete, we make sure that it does
exist and matches what is going to be removed (a removal patch
records the full preimage, so we check what you have in your
working tree matches it in full -- otherwise we would risk
losing your local changes), which again is done by directly
opening and reading the file.
These checks need to be adjusted so that they are not fooled by
symlinks in the middle.
- To make sure something does not exist, first lstat(). If it
does not exist, it does not, so be happy. If it _does_, we
might be getting fooled by a symlink in the middle, so break
leading paths and see if there are symlinks involved. When
we are checking for a path a/b/c/d, if any of a, a/b, a/b/c
is a symlink, then a/b/c/d does _NOT_ exist, for the purpose
of our test.
This would fix this particular case you saw, and would not
add extra overhead in the usual case.
- To make sure something already exists, first lstat(). If it
does not exist, barf (up to this, we already do). Even if it
does seem to exist, we might be getting fooled by a symlink
in the middle, so make sure leading paths are not symlinks.
This would make the normal codepath much more expensive for
deep trees, which is a bit worrisome.
This patch implements the first side of the check "making sure
it does not exist". The latter "making sure it exists" check is
not done yet, so applying the patch in reverse would still
fail, but we have to start from somewhere.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use the :fork: access method to force cvs to
call "$CVS_SERVER server" even when accessing a local
repository.
Add a basic test for checkout and some tests for update.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This tests the -d, -n, -f, -x, and -X options to git-clean.
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Small correction in reading of commit headers
Documentation: fix typo in git-remote.txt
Add test for blame corner cases.
blame: -C -C -C
blame: Notice a wholesale incorporation of an existing file.
Fix --boundary output
diff format documentation: describe raw combined diff format
Mention version 1.5.1 in tutorial and user-manual
Add --no-rebase option to git-svn dcommit
Fix markup in git-svn man page
* maint:
gitweb: use decode_utf8 directly
posix compatibility for t4200
Document 'opendiff' value in config.txt and git-mergetool.txt
Allow PERL_PATH="/usr/bin/env perl"
Make xstrndup common
diff.c: fix "size cache" handling.
http-fetch: Disable use of curl multi support for libcurl < 7.16.
Fix t4200 so that it also works on OS X by not relying on gnu
extensions to sed.
Signed-off-by: Bryan Larsen <bryan@larsen.st>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For example Mac OS X lacks the seq command. So we cannot use it
there. A good old while loop works just as good.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Some other programs get the user's email address from $EMAIL, so fall back to
that if we don't have a Git-specific email address.
Signed-off-by: Josh Triplett <josh@freedesktop.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also leave a warning for future merge-recursive explorers.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The interface is similar to the custom low-level merge drivers.
First you configure your filter driver by defining 'filter.<name>.*'
variables in the configuration.
filter.<name>.clean filter command to run upon checkin
filter.<name>.smudge filter command to run upon checkout
Then you assign filter attribute to each path, whose name
matches the custom filter driver's name.
Example:
(in .gitattributes)
*.c filter=indent
(in config)
[filter "indent"]
clean = indent
smudge = cat
Signed-off-by: Junio C Hamano <junkio@cox.net>
The 'ident' attribute set to path squashes "$ident:<any bytes
except dollor sign>$" to "$ident$" upon checkin, and expands it
to "$ident: <blob SHA-1> $" upon checkout.
As we have two conversions that affect checkin/checkout paths,
clarify how they interact with each other.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Documentation/git-reset.txt: suggest git commit --amend in example.
Build RPM with ETC_GITCONFIG=/etc/gitconfig
Ignore all man sections as they are generated files.
Fix typo in git-am: s/Was is/Was it/
Reverse the order of -b and --track in the man page.
dir.c(common_prefix): Fix two bugs
Conflicts:
git.spec.in
Instead of running rev-list and picking earlier lines using head/tail pipeline,
grab commit object name as we build commits. This also removes a non POSIX
use of tail with -linenum (more posixly-correct way to say it is "-n linenum")
Signed-off-by: Junio C Hamano <junkio@cox.net>
A Large Angry SCM (gitzilla) noticed that on an unnamed platform, tail -c
wants its byte count as part of the option, not as a separate argument.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that git-commit got chatty, we have to shut it up again.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The function common_prefix() is used to find the common subdirectory of
a couple of pathnames. When checking if the next pathname matches up with
the prefix, it incorrectly checked the whole path, not just the prefix
(including the slash). Thus, the expensive part of the loop was executed
always.
The other bug is more serious: if the first and the last pathname in the
list have a longer common prefix than the common prefix for _all_ pathnames
in the list, the longer one would be chosen. This bug was probably hidden
by the fact that bash's wildcard expansion sorts the results, and the code
just so happens to work with sorted input.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This enhances the attributes mechanism so that external programs
meant for existing GIT_EXTERNAL_DIFF interface can be specifed
per path.
To configure such a custom diff driver, first define a custom
diff driver in the configuration:
[diff "my-c-diff"]
command = <<your command string comes here>>
Then mark the paths that you want to use this custom driver
using the attribute mechanism.
*.c diff=my-c-diff
The intent of this separation is that the attribute mechanism is
used for specifying the type of the contents, while the
configuration mechanism is used to define what needs to be done
to that type of the contents, which would be specific to both
platform and personal taste.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'jc/attr': (28 commits)
lockfile: record the primary process.
convert.c: restructure the attribute checking part.
Fix bogus linked-list management for user defined merge drivers.
Simplify calling of CR/LF conversion routines
Document gitattributes(5)
Update 'crlf' attribute semantics.
Documentation: support manual section (5) - file formats.
Simplify code to find recursive merge driver.
Counto-fix in merge-recursive
Fix funny types used in attribute value representation
Allow low-level driver to specify different behaviour during internal merge.
Custom low-level merge driver: change the configuration scheme.
Allow the default low-level merge driver to be configured.
Custom low-level merge driver support.
Add a demonstration/test of customized merge.
Allow specifying specialized merge-backend per path.
merge-recursive: separate out xdl_merge() interface.
Allow more than true/false to attributes.
Document git-check-attr
Change attribute negation marker from '!' to '-'.
...
* lt/gitlink:
Tests for core subproject support
Expose subprojects as special files to "git diff" machinery
Fix some "git ls-files -o" fallout from gitlinks
Teach "git-read-tree -u" to check out submodules as a directory
Teach git list-objects logic to not follow gitlinks
Fix gitlink index entry filesystem matching
Teach "git-read-tree -u" to check out submodules as a directory
Teach git list-objects logic not to follow gitlinks
Don't show gitlink directories when we want "other" files
Teach git-update-index about gitlinks
Teach directory traversal about subprojects
Fix thinko in subproject entry sorting
Teach core object handling functions about gitlinks
Teach "fsck" not to follow subproject links
Add "S_IFDIRLNK" file mode infrastructure for git links
Add 'resolve_gitlink_ref()' helper function
Avoid overflowing name buffer in deep directory structures
diff-lib: use ce_mode_from_stat() rather than messing with modes manually
* np/pack: (27 commits)
document --index-version for index-pack and pack-objects
pack-objects: remove obsolete comments
pack-objects: better check_object() performances
add get_size_from_delta()
pack-objects: make in_pack_header_size a variable of its own
pack-objects: get rid of create_final_object_list()
pack-objects: get rid of reuse_cached_pack
pack-objects: clean up list sorting
pack-objects: rework check_delta_limit usage
pack-objects: equal objects in size should delta against newer objects
pack-objects: optimize preferred base handling a bit
clean up add_object_entry()
tests for various pack index features
use test-genrandom in tests instead of /dev/urandom
simple random data generator for tests
validate reused pack data with CRC when possible
allow forcing index v2 and 64-bit offset treshold
pack-redundant.c: learn about index v2
show-index.c: learn about index v2
sha1_file.c: learn about index version 2
...
