* maint:
Eliminate confusing "won't bisect on seeked tree" failure
builtin-reflog.c: don't install new reflog on write failure
send-email: fix In-Reply-To regression
Fix 'git cvsexportcommit -w $cvsdir ...' when used with relative $GIT_DIR
Add testcase for 'git cvsexportcommit -w $cvsdir ...' with relative $GIT_DIR
Prompt to continue when editing during rebase --interactive
Documentation/git svn log: add a note about timezones.
Don't use GIT_CONFIG in t5505-remote
Conflicts:
t/t9001-send-email.sh
t/t9200-git-cvsexportcommit.sh
Having more than one URL for a remote is perfectly normal when
the remote is defined to push to multiple places. Get rid of
the annoying "Warning" message.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This error message is very confusing---it doesn't tell the user
anything about how to fix the situation. And the actual fix
for the situation ("git bisect reset") does a checkout of a
potentially random branch, (compared to what the user wants to
be on for the bisect she is starting).
The simplest way to eliminate the confusion is to just make
"git bisect start" do the cleanup itself. There's no significant
loss of safety here since we already have a general safety in
the form of the reflog.
Note: We preserve the warning for any cogito users. We do this
by switching from .git/head-name to .git/BISECT_START for the
extra state, (which is a more descriptive name anyway).
Signed-off-by: Carl Worth <cworth@cworth.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When expiring reflog entries, a new temporary log is written which contains
only the entries to retain. After it is written, it is renamed to replace
the existing reflog. Currently, we check that writing of the new log is
successful and print a message on failure, but the original reflog is still
replaced with the new reflog even on failure. This patch causes the
original reflog to be retained if we fail when writing the new reflog.
Signed-off-by: Brandon Casey <casey@nrlssc.navy.mil>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix a regression introduced by
1ca3d6e (send-email: squelch warning due to comparing undefined $_ to "")
where if the user was prompted for an initial In-Reply-To and didn't
provide one, messages would be sent out with an invalid In-Reply-To of
"<>"
Also add test cases for the regression and the fix. A small modification
was needed to allow send-email to take its replies from stdin if the
environment variable GIT_SEND_EMAIL_NOTTY is set.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch does a couple of things:
* Makes commit/author/committer search case insensitive
To be consistent with the grep search; I see no convincing
reason for the search to be case sensitive, and you might
get in trouble especially with contributors e.g. from Japan
or France where they sometimes like to uppercase their last
name.
* Makes grep search by default search for fixed strings.
* Introduces 're' checkbox that enables POSIX extended regexp searches
This works for all the search types. The idea comes from Jakub.
It does not make much sense (and is not easy at all) to untangle most
of these changes from each other, thus they all go in a single patch.
[jn: Cherry-picked from Pasky's http://repo.or.cz/git/gitweb.git]
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use '--fixed-strings' option to git-rev-list to simplify and improve
searching commit messages (commit search). It allows to search for
example for "don't" successfully from gitweb.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change order of parameters in parse_commits() to have $filename
before @args (extra options), to allow for multiple extra options,
for example both '--grep=<pattern>' and '--fixed-strings'.
Change all callers to follow new calling convention.
Originally by Petr Baudis, in http://repo.or.cz/git/gitweb.git:
b98f0a7c gitweb: Clearly distinguish regexp / exact match searches
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Alexandre Julliard <julliard@winehq.org>
Tested-by: Karl Hasselström <kha@treskal.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* db/checkout: (21 commits)
checkout: error out when index is unmerged even with -m
checkout: show progress when checkout takes long time while switching branches
Add merge-subtree back
checkout: updates to tracking report
builtin-checkout.c: Remove unused prefix arguments in switch_branches path
checkout: work from a subdirectory
checkout: tone down the "forked status" diagnostic messages
Clean up reporting differences on branch switch
builtin-checkout.c: fix possible usage segfault
checkout: notice when the switched branch is behind or forked
Build in checkout
Move code to clean up after a branch change to branch.c
Library function to check for unmerged index entries
Use diff -u instead of diff in t7201
Move create_branch into a library file
Build-in merge-recursive
Add "skip_unmerged" option to unpack_trees.
Discard "deleted" cache entries after using them to update the working tree
Send unpack-trees debugging output to stderr
Add flag to make unpack_trees() not print errors.
...
Conflicts:
Makefile
* db/cover-letter:
Improve collection of information for format-patch --cover-letter
Add API access to shortlog
t4014: Replace sed's non-standard 'Q' by standard 'q'
Support a --cc=<email> option in format-patch
Combine To: and Cc: headers
Fix format.headers not ending with a newline
Add tests for extra headers in format-patch
Add a --cover-letter option to format-patch
Export some email and pretty-printing functions
Improve message-id generation flow control for format-patch
Add more tests for format-patch
Conflicts:
builtin-log.c
builtin-shortlog.c
pretty.c
* js/run-command:
start_command(), if .in/.out > 0, closes file descriptors, not the callers
start_command(), .in/.out/.err = -1: Callers must close the file descriptor
* ae/pack-autothread:
Revert "pack-objects: Print a message describing the number of threads for packing"
pack-objects: Print a message describing the number of threads for packing
pack-objects: Add runtime detection of online CPU's
* sp/describe:
Use git-describe --exact-match in bash prompt on detached HEAD
Teach git-describe --exact-match to avoid expensive tag searches
Avoid accessing non-tag refs in git-describe unless --all is requested
Teach git-describe to use peeled ref information when scanning tags
Optimize peel_ref for the current ref of a for_each_ref callback
When using the '-w $cvsdir' option to cvsexportcommit, it will chdir into
$cvsdir before executing several other git commands. If $GIT_DIR is set to
a relative path (e.g. '.'), the git commands executed by cvsexportcommit
will naturally fail.
Therefore, ensure that $GIT_DIR is absolute before the chdir to $cvsdir.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The testcase verifies that 'git cvsexportcommit' functions correctly when
the '-w' option is used, and GIT_DIR is set to a relative path (e.g. '.').
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On hitting an edit point in an interactive rebase, git should prompt
the user to run "git rebase --continue"
Signed-off-by: Jonathan del Strother <jon.delStrother@bestbefore.tv>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git svn log mimics the timezone converting behaviour of svn log, but
this was undocumented.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When syncing, git-p4 will only download files that are included in the active
perforce client spec. This does not change the default behaviour - it requires
that the user either supplies the command line argument --use-client-spec, or
sets the git config option p4.useclientspec to "true".
Signed-off-by: Tor Arvid Lund <torarvid@gmail.com>
Signed-off-by: Simon Hausmann <simon@lst.de>
Removed storing the list of commits in a configuration file. We only need the list
of commits at run-time.
Signed-off-by: Simon Hausmann <simon@lst.de>
This feature was originally meant to allow for quicker direct submits into perforce, but
it turns out that it is not actually quicker than doing a git commit and then running
git-p4 submit.
Signed-off-by: Simon Hausmann <simon@lst.de>
Instead of trying to substitute fields in the p4 submit template we now simply
replace the description of the submit with the log message of the git commit.
Signed-off-by: Simon Hausmann <simon@lst.de>
This turns out to be rarely useful and is already covered by git's commit.template configuration variable.
Signed-off-by: Simon Hausmann <simon@lst.de>
Teach git-p4 about the -/ option which adds depot paths to the exclude
list, used when cloning. The option is chosen such that the natural
Perforce syntax works, eg:
git p4 clone //branch/path/... -//branch/path/{large,old}/...
Trailing ... on exclude paths are optional.
This is a generalization of a change by Dmitry Kakurin (thanks).
Signed-off-by: Tommy Thorn <tommy-git@thorn.ws>
Signed-off-by: Simon Hausmann <simon@lst.de>
For some reason, t5505-remote was setting GIT_CONFIG to .git/config
and exporting it. This should have been no-op, as test framework did
the same for a long time anyway.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add support for -F | --fixed-strings option to "git log --grep"
and friends: "git log --author", "git log --committer=<pattern>".
Code is based on implementation of this option in "git grep".
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This reverts commit 6c723f5e6b.
The additional message may be interesting for git developers,
but not useful for the end users, and clutters the output.
When a patch adds a whitespace followed by end-of-line, the
trailing whitespace error was detected correctly but was not
fixed, due to misconversion in 42ab241 (builtin-apply.c: do not
feed copy_wsfix() leading '+').
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/git-am.txt: Pass -r in the example invocation of rm -f .dotest
timezone_names[]: fixed the tz offset for New Zealand.
filter-branch documentation: non-zero exit status in command abort the filter
rev-parse: fix potential bus error with --parseopt option spec handling
Use a single implementation and API for copy_file()
Documentation/git-filter-branch: add a new msg-filter example
Correct fast-export file mode strings to match fast-import standard
parse_commit ignores parent commits with certain errors
(eg. a non commit object is already loaded under the sha1 of
the parent). To make fsck reports such errors, it has to compare
the nummer of parent commits returned by parse commit with the
number of parent commits in the object or in the graft/shallow file.
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The requirements are:
* it may not crash on NULL pointers
* a callback function is needed, as index-pack/unpack-objects
need to do different things
* the type information is needed to check the expected <-> real type
and print better error messages
Signed-off-by: Martin Koegler <mkoegler@auto.tuwien.ac.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve look of commit search output ('search' view) by better cutting
of matched string and its context in match info, as suggested by Junio.
For example, if you are looking for "very long search string" in the
following line:
Could somebody test this with very long search string, and see how
you would now see:
...this with <<very long ... string>>, and see...
instead of:
Could som... <<very long search...>>, and see...
(where <<something>> denotes emphasized / colored fragment; matched
fragment to be more exact).
For this feature, support for fourth [optional] parameter to chop_str
subroutine was added. This fourth parameter is used to denote where
to cut string to make it shorter. chop_str can now cut at the
beginning (from the _left_ side of the string), in the middle
(_center_ of the string), or at the end (from the _right_ side of
the string); cutting from right is the default:
chop_str(somestring, len, slop, 'left') -> ' ...string'
chop_str(somestring, len, slop, 'center') -> 'som ... ing'
chop_str(somestring, len, slop, 'right') -> 'somestr... '
If you want to use default slop (default additional length), use undef
as value for third parameter to chop_str.
While at it, return from chop_str early if given string is so short
that chop_str couldn't shorten it. Simplify also regexp used by
chop_str. Make ellipsis (dots) stick to shortened fragment for
cutting at ends, to better see which part got shortened.
Simplify passing all arguments to chop_str in chop_and_escape_str
subroutine. This was needed to pass additional options to chop_str.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
