Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SKIP messages are now part of the TAP plan. A TAP harness now knows
why a particular test was skipped and can report that information. The
non-TAP harness built into Git's test-lib did nothing special with
these messages, and is unaffected by these changes.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* gv/portable:
test-lib: use DIFF definition from GIT-BUILD-OPTIONS
build: propagate $DIFF to scripts
Makefile: Tru64 portability fix
Makefile: HP-UX 10.20 portability fixes
Makefile: HPUX11 portability fixes
Makefile: SunOS 5.6 portability fix
inline declaration does not work on AIX
Allow disabling "inline"
Some platforms lack socklen_t type
Make NO_{INET_NTOP,INET_PTON} configured independently
Makefile: some platforms do not have hstrerror anywhere
git-compat-util.h: some platforms with mmap() lack MAP_FAILED definition
test_cmp: do not use "diff -u" on platforms that lack one
fixup: do not unconditionally disable "diff -u"
tests: use "test_cmp", not "diff", when verifying the result
Do not use "diff" found on PATH while building and installing
enums: omit trailing comma for portability
Makefile: -lpthread may still be necessary when libc has only pthread stubs
Rewrite dynamic structure initializations to runtime assignment
Makefile: pass CPPFLAGS through to fllow customization
Conflicts:
Makefile
wt-status.h
In tests, call test_cmp rather than raw diff where possible (i.e. if
the output does not go to a pipe), to allow the use of, say, 'cmp'
when the default 'diff -u' is not compatible with a vendor diff.
When that is not possible, use $DIFF, as set in GIT-BUILD-OPTIONS.
Signed-off-by: Gary V. Vaughan <gary@thewrittenword.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Consistently using test_cmp would make debugging test scripts far easier,
as output from them run under "-v" option becomes readable.
Besides, some platforms' "diff" implementations lack "-q" option.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using a dollar sign in double quotes isn't portable. Escape them with
a backslash or replace the double quotes with single quotes.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some test scripts run Perl scripts as if they were git-* scripts, and
thus need to use the same perl that will be put in the shebang line of
git*.perl commands. $PERL_PATH therefore needs to be used instead of
a bare "perl".
The tests can fail if another perl is found in $PATH before the one
defined in $PERL_PATH.
Example test failure caused by this: the perl defined in $PERL_PATH has
Error.pm installed, and therefore the Git.pm's Makefile.PL doesn't install
the private copy. The perl from $PATH doesn't have Error.pm installed, and
all git*.perl scripts invoked during the test will fail loading Error.pm.
Makefile patch by Jeff King <peff@peff.net>.
Signed-off-by: Philippe Bruhat (BooK) <book@cpan.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These scripts all test git programs that are written in
perl, and thus obviously won't work if NO_PERL is defined.
We pass NO_PERL to the scripts from the building Makefile
via the GIT-BUILD-OPTIONS file.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests report that some tests will be skipped. They used
'test_expect_success' with a trivially successful test. Nowadays we have
the helper function 'say' for this purpose.
In on case, 'say_color skip' is replaced by 'say' because the former is
not intended as a public API.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
The tests do not depend on that the clones are hard-linked, but used
--local only as an optimization: At the time that --local was used first
in t9400 hard-linked clones were not the default, yet.
By removing --local, we help filesystems that do not support hard-links.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Expecting echo to recognise -n is a BSDism. Using printf is far more
portable.
Discovered on OS X 10.5.5 in t4030-diff-textconv.sh and changed in all
the test scripts.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no reason to have a separate variable cmd_is_annotate;
OUTPUT_ANNOTATE_COMPAT option is supposed to produce the compatibility
output, and we should produce the same output even when the command was
not invoked as "annotate" but as "blame -c".
Noticed by Pasky.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that req_update shows refs, even if all refs are packed.
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Check that all branches are displayed.
Signed-off-by: Fabian Emmes <fabian.emmes@rwth-aachen.de>
Signed-off-by: Lars Noschinski <lars@public.noschinski.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the remainder of the issues where the test script itself is at
fault for failing when the git checkout path contains whitespace or other
shell metacharacters.
The majority of git svn tests used the idiom
test_expect_success "title" "test script using $svnrepo"
These were changed to have the test script in single-quotes:
test_expect_success "title" 'test script using "$svnrepo"'
which unfortunately makes the patch appear larger than it really is.
One consequence of this change is that in the verbose test output the
value of $svnrepo (and in some cases other variables, too) is no
longer expanded, i.e. previously we saw
* expecting success:
test script using /path/to/git/t/trash/svnrepo
but now it is:
* expecting success:
test script using "$svnrepo"
Signed-off-by: Bryan Donlan <bdonlan@fushizen.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "-n" syntax is not supported by System V versions of
tail (which prefer "tail -1"). Unfortunately "tail -1" is
not actually POSIX. We had some of both forms in our
scripts.
Since neither form works everywhere, this patch replaces
both with the equivalent sed invocation:
sed -ne '$p'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
System V versions of grep (such as Solaris /usr/bin/grep)
don't understand either of these options. git's usage of
"grep -e pattern" fell into one of two categories:
1. equivalent to "grep pattern". -e is only useful here if
the pattern begins with a "-", but all of the patterns
are hardcoded and do not begin with a dash.
2. stripping comments and blank lines with
grep -v -e "^$" -e "^#"
We can fortunately do this in the affirmative as
grep '^[^#]'
Uses of "-q" can be replaced with redirection to /dev/null.
In many tests, however, "grep -q" is used as "if this string
is in the expected output, we are OK". In this case, it is
fine to just remove the "-q" entirely; it simply makes the
"verbose" mode of the test slightly more verbose.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally, test_expect_failure was designed to be the opposite
of test_expect_success, but this was a bad decision. Most tests
run a series of commands that leads to the single command that
needs to be tested, like this:
test_expect_{success,failure} 'test title' '
setup1 &&
setup2 &&
setup3 &&
what is to be tested
'
And expecting a failure exit from the whole sequence misses the
point of writing tests. Your setup$N that are supposed to
succeed may have failed without even reaching what you are
trying to test. The only valid use of test_expect_failure is to
check a trivial single command that is expected to fail, which
is a minority in tests of Porcelain-ish commands.
This large-ish patch rewrites all uses of test_expect_failure to
use test_expect_success and rewrites the condition of what is
tested, like this:
test_expect_success 'test title' '
setup1 &&
setup2 &&
setup3 &&
! this command should fail
'
test_expect_failure is redefined to serve as a reminder that
that test *should* succeed but due to a known breakage in git it
currently does not pass. So if git-foo command should create a
file 'bar' but you discovered a bug that it doesn't, you can
write a test like this:
test_expect_failure 'git-foo should create bar' '
rm -f bar &&
git foo &&
test -f bar
'
This construct acts similar to test_expect_success, but instead
of reporting "ok/FAIL" like test_expect_success does, the
outcome is reported as "FIXED/still broken".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git histories may have multiple roots, which can cause
git merge-base to fail and this caused git cvsserver to die.
This commit teaches git cvsserver to handle a failing git
merge-base gracefully, and modifies the test case to verify this.
All the test cases now use a history with two roots.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
git-cvsserver.perl | 9 ++++++++-
t/t9400-git-cvsserver-server.sh | 10 +++++++++-
2 files changed, 17 insertions(+), 2 deletions(-)
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is preferable to have the test setup in a test case. The
setup itself may fail and having it as a test case handles this
situation more gracefully.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Frank Lichtenheld, Fri, Jun 15, 2007 03:01:53 +0200:
> +test_expect_failure 'req_Root failure (export-all w/o whitelist)' \
> + 'cat request-anonymous | git-cvsserver --export-all pserver >log 2>&1
> + || false'
This does not work, at least for bash in current Ubuntu:
GNU bash, version 3.2.13(1)-release
You have to put "||" on the previous line:
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Embarrassing bug number two in my options patch.
Also enforce that --export-all is only ever used together with an
explicit whitelist. Otherwise people might export every git repository
on the whole system without realising.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Embarassing bug number one in my options patch.
Since the code for --base-path support rewrote
the cvsroot value after comparing it with a possible
existing value (i.e. from pserver authentication)
the check always failed.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make git-cvsserver understand some options inspired by
git-daemon, namely --base-path, --export-all, --strict-paths.
Also allow the caller to specify a whitelist of allowed
directories, again similar to git-daemon.
While already adding option parsing also support the common
--help and --version options.
Rationale:
While the gitcvs.enabled configuration option already
offers means to limit git-cvsserver access to a repository,
there are some use cases where other methods of access
control prove to be more useful.
E.g. if setting up a pserver for a collection of public
repositories one might want limit the exported repositories
to exactly the directory this collection is located whithout
having to worry about other repositories that might lie around
with the configuration variable set (never trust your users ;)
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The path submitted with the Root request has to be absolute
(cvs does it this way and it may save us some sanity checks
later)
If multiple roots are specified (e.g. because we use
pserver authentication which will already include the
root), ensure that they say all the same.
Probably neither is a security risk, and neither should ever
be triggered by a sane client, but when validating
input data, it's better to be save than sorry.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since this is a trivial variation of the general pserver
authentication, there is really no reason not to support
it.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If we are too fast with our changes, the file in
the working copy might still have the same mtime
as noted in the CVS/Entries. This will cause CVS
to happily report to the server that the file is
unmodified which can lead to data loss (and in
our case test failure).
CVS sucks!
Work around that by sleeping for a second.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While we can easily test the cvs <-> git-cvsserver
communication with :fork: and git-cvsserver server
there are some pserver specifics we should test, too.
Currently this are two tests of the pserver authentication.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add some cvs update tests that include various merge
situations. Also add a basic test for update -C
since it fits so well in there.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add a few test cases for the config file parsing
done by git-cvsserver.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-cvsserver has a bug in its configuration file output parser
that makes it choke if the configuration has these:
[diff]
color = auto
[diff.color]
whitespace = blue reverse
This needs to be fixed, but thanks to that bug, a separate bug
in t9400 test script was discovered. The test discarded
GIT_CONFIG instead of pointing at the proper one to be used in
the exoprted repository. This allowed user's .gitconfig and (if
exists) systemwide /etc/gitconfig to affect the outcome of the
test, which is a big no-no.
The patch fixes the problem in the test. Fixing the
git-cvsserver's configuration parser is left as an exercise to
motivated volunteers ;-)
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use the :fork: access method to force cvs to
call "$CVS_SERVER server" even when accessing a local
repository.
Add a basic test for checkout and some tests for update.
Signed-off-by: Frank Lichtenheld <frank@lichtenheld.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
