This seems to be a pre-++ residual declaration and it wasn't good for
anything at all besides flooding the webserver errorlog with "omg, our in
the same scope!!" warnings.
[jc: the patch was bogus by defining the variable which defeated a
later test that checked it with "defined", which I fixed up.]
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use proper english. Be more exact in one comment.
[jc: I threw in a bit of style clean-up as well]
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that index-pack can be streamed with a pack, it is probably a good
idea to use it directly instead of creating a temporary file and running
index-pack afterwards. This way index-pack can abort early whenever a
corruption is encountered even if the pack has not been fully
downloaded, it can display a progress percentage as it knows how much to
expects, and it is a bit faster since the pack indexing is partially
done as data is received. Using fetch -k doesn't need to disable thin
pack generation on the remote end either.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
gitweb: Check git base URLs before generating URL from it
Documentation: add git in /etc/services.
Documentation: add upload-archive service to git-daemon.
git-cherry: document limit and add diagram
diff-format.txt: Correct information about pathnames quoting in patch format
Check if each of git base URLs in @git_base_url_list is true before
appending "/$project" to it to generate project URL.
This fixes the error that for default configuration for gitweb in
Makefile, with GITWEB_BASE_URL empty (and "++GITWEB_BASE_URL++" being
"" in gitweb.cgi), we had URL of "/$project" in the summary view.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch minimaly documents the upload-archive service,
hoping that someone with better knowledge will improve upon.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds the diagram from the long usage string of git-cherry to
its documentation, and documents the third option. I changed some of
the + to - in order to save the reader from wondering where they might
fit into the picture.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This describes the abbreviation possibilities for git-show-ref
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch on top of 'next' makes built-in git-cherry handle root
commits.
It moves the static function log-tree.c::diff_root_tree() to
tree-diff.c and makes it more similar to diff_tree_sha1() by
shuffling around arguments and factoring out the call to
log_tree_diff_flush(). Consequently the name is changed to
diff_root_tree_sha1(). It is a version of diff_tree_sha1() that
compares the empty tree (= root tree) against a single 'real' tree.
This function is then used in get_patch_id() to compute patch IDs
for initial commits instead of SEGFAULTing, as the current code
does if confronted with parentless commits.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When all the filenames line up it's much easier to copy and paste them
somewhere else, or to remove the "modified:", "copied:", etc prefix.
Signed-off-by: Andy Parkins <andyparkins@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It appears that git-unpack-objects writes the last part of the input
buffer to stdout after the pack has been parsed. This looks a bit
suspicious since the last fill() might have filled the buffer up to
the 4096 byte limit and more data might still be pending on stdin,
but since this is about being a drop-in replacement for unpack-objects
let's simply duplicate the same behavior for now.
[jc: with fix-up appeared in Nico's sleep]
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use --no-commit-id option to git-diff-tree command in git_commit and
git_commitdiff to filter out commit ID output that git-diff-tree adds
when called with only one <tree-ish> (not only for --stdin). Remove
filtering commit IDs from git-diff-tree output.
This option is in git since at least v1.0.0, so make use of it.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"new file" and "deleted file" were already reported in the
original code, but the logic was not as transparent as it could
have. This uses a few variables and more comments to clarify
the flow. The rule is: (1) if a path exists in the merge result
when no parent had it, we report "new" (otherwise it came from
the parents, as opposed to have added by the evil merge). (2) if
the path does not exist in the merge result, it is "deleted".
Since we can say "new" and "deleted", there is no reason not to
follow the /dev/null convention. This fixes it.
Appending function name after @@@ ... @@@ is trivial, so
implement it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Nobody should create ambiguous refs (i.e. have tag "foobar" and branch
"foobar" at the same time) that need to be disambiguated with these
rules to keep sanity, but the rules are there so document them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is more interesting to look at when performing a big fetch.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new flag, --fix-thin, instructs git-index-pack to append any missing
objects to a thin pack to make it self contained and indexable. Of course
objects missing from the pack must be present elsewhere in the local
repository.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update example combined diff format to the current version
$ git diff-tree -p -c fec9ebf16c
and provide complete first chunk in example.
Document combined diff format headers: how "diff header" look like,
which of "extended diff headers" are used with combined diff and how
they look like, differences in two-line from-file/to-file header from
non-combined diff format, chunk header format.
It should be noted that combined diff format was designed for quick
_content_ inspection and renames would work correctly to pick which
blobs from each tree to compare but otherwise not reflected in the
output (the pathnames are not shown).
[jc: with minimum copyediting]
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is useless because --inetd implies --syslog.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Remove the introduction: I think it should be obvious why
we have this. (And if it isn't obvious then we've got other
problems.)
Replace reference to git whatchanged by git log.
Miscellaneous style and grammar fixes.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A new flag, --stdin, allows for a pack to be received over a stream.
When this flag is provided, the pack content is written to either
the named pack file or directly to the object repository under the
same name as produced by git-repack. The pack index is written as
well with the corresponding base name, unless the index name is
overriden with -o.
With this patch, git-index-pack could be used instead of
git-unpack-objects when fetching remote objects but only with
non "thin" packs for now.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/web:
gitweb: Print commit message without title in commitdiff only if there is any
gitweb: Filter out commit ID from @difftree in git_commit and git_commitdiff
gitweb: Get rid of git_print_simplified_log
gitweb: Show project's README.html if available
gitweb: Do not automatically append " git" to custom site name
gitweb: Make search type a popup menu
gitweb: Restore object-named links in item lists
gitweb: use for-each-ref to show the latest activity across branches
* jc/web-blame:
gitweb: spell "blame --porcelain" with -p
blame: Document and add help text for -f, -n, and -p
gitweb: blame porcelain: lineno and orig lineno swapped
Remove git-annotate.perl and create a builtin-alias for git-blame
gitweb: use blame --porcelain
git-blame --porcelain
blame.c: move code to output metainfo into a separate function.
git-blame: --show-number (and -n)
git-blame: --show-name (and -f)
blame.c: whitespace and formatting clean-up.
Gitweb - provide site headers and footers
gitweb: blame: Mouse-over commit-8 shows author and date
gitweb: blame: print commit-8 on the leading row of a commit-block
Revert 954a618375
gitweb: prepare for repositories with packed refs.
gitweb: make leftmost column of blame less cluttered.
* maint:
xdiff: Match GNU diff behaviour when deciding hunk comment worthiness of lines
Update cherry documentation.
Refer to git-rev-parse:Specifying Revisions from git.txt
git-fetch.sh printed protocol fix
RPM package re-classification.
Documentation: note about contrib/.
git-svn: fix symlink-to-file changes when using command-line svn 1.4.0
Set $HOME for selftests
This removes the '#' and '(' tests and adds a '$' test instead although I have
no idea what it is actually good for - but hey, if that's what GNU diff does...
Pasky only went and did as Junio sayeth.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The brief list given in "Symbolic Identifiers" section of the
main documentation is good enough for overview, but help the
reader to find a more comrehensive list as needed.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have supported https:// protocol for some time and in 1.4.3
added ftp:// protocol. The transfer were still reported to be
over http.
[jc: Tuncer used substring parameter substitution ${remote%%:*}
but I am deferring it to a later day. We should replace
colon-expr with substring substitution after everybody's shell
can grok it someday, but we are not in a hurry. ]
Signed-off-by: Junio C Hamano <junkio@cox.net>
Grabbing anything that had *arch* in its name into git-arch
package was a wrong idea and we lost git-archive from git-core
by mistake.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Print the rest of commit message (title, i.e. first line of commit
message, is printed separately) only if there is any.
In repository which uses signoffs this shouldn't happen, because
commit message should consist of at least title and signoff.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Filter out commit ID output that git-diff-tree adds when called with
only one <tree-ish> (not only for --stdin) in git_commit and
git_commitdiff.
This also works with older git versions, which doesn't have
--no-commit-id option to git-diff-tree.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replace calls to git_print_simplified_log with its expansion,
i.e. with calling git_print_log with appropriate options.
Remove no longer used git_print_simplified_log subroutine.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I incorrectly thought this was hopelessly broken in svn 1.4.0,
but now it's just broken in that the old method didn't work. It
looks like svn propdel and svn propset must be used now and the
(imho) more obvious svn rm --force && svn add no longer works.
"make -C t full-svn-test" should now work.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Acked-by: Uwe Zeisberger <zeisberg@informatik.uni-freiburg.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The test expected "git branch --help" to exit successfully, but
built-ins spawn "man" when given --help, and when the test is
run, manpages may not be installed yet and "man" can legally
exit non-zero in such a case.
Also the new implementation logs "Created from master", instead
of "Created from HEAD" in the reflog, which makes a lot more
sense, so adjust the test to match that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the repository includes a README.html file, show it in the summary page.
The usual "this should be in the config file" argument does not apply here
since this can be larger and having such a big string in the config file
would be impractical.
I don't know if this is suitable upstream, but it's one of the repo.or.cz
custom modifications that I've thought could be interesting for others
as well.
Compared to the previous patch, this adds the '.html' extension to the
filename, so that it's clear it is, well, HTML.
Signed-off-by: Petr Baudis <pasky@suse.cz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
