049e64aa50 ("Documentation: convert SubmittingPatches to AsciiDoc",
2017-11-12) changed the `git blame` and `git shortlog` examples given in
the section on sending your patches.
In order to italicize the `$path` argument the commands are enclosed in
plus characters as opposed to backticks. The difference between the
quoting methods is that backtick enclosed text is not subject to further
expansion. This formatting makes reading SubmittingPatches in a git
clone a little more difficult. In addition to the underscores around
`$path` the `--` chars in `git shortlog --no-merges` must be replaced
with `{litdd}`.
Use backticks to quote these commands. The italicized `$path` is lost
from the html version but the commands can be read (and copied) more
easily by users reading the text version. These readers are more likely
to use the commands while submitting patches. Make it easier for them.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Once upon a time, git-clone would refuse to write into a
directory that it did not itself create. The cleanup
routines for a failed clone could therefore just remove the
git and worktree dirs completely.
In 55892d2398 (Allow cloning to an existing empty directory,
2009-01-11), we learned to write into an existing directory.
Which means that doing:
mkdir foo
git clone will-fail foo
ends up deleting foo. This isn't a huge catastrophe, since
by definition foo must be empty. But it's somewhat
confusing; we should leave the filesystem as we found it.
Because we know that the only directory we'll write into is
an empty one, we can handle this case by just passing the
KEEP_TOPLEVEL flag to our recursive delete (if we could
write into populated directories, we'd have to keep track of
what we wrote and what we did not, which would be much
harder).
Note that we need to handle the work-tree and git-dir
separately, though, as only one might exist (and the new
tests in t5600 cover all cases).
Reported-by: Stephan Janssen <sjanssen@you-get.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Two parts of git-clone's setup logic check whether a
directory exists, and they both call stat directly with the
same scratch "struct stat" buffer. Let's pull that into a
helper, which has a few advantages:
- it makes the purpose of the stat calls more obvious
- it makes it clear that we don't care about the
information in "buf" remaining valid
- if we later decide to make the check more robust (e.g.,
complaining about non-directories), we can do it in one
place
Note that we could just use file_exists() for this, which
has identical code. But we specifically care about
directories, so this future-proofs us against that function
later getting more picky about seeing actual files.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is an old script which could use some updating before
we add to it:
- use the standard line-breaking:
test_expect_success 'title' '
body
'
- run all code inside test_expect blocks to catch
unexpected failures in setup steps
- use "test_commit -C" instead of manually entering
sub-repo
- use test_when_finished for cleanup steps
- test_path_is_* as appropriate
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back when this test was written, git-clone could not handle
a repository without any commits. These days it works fine,
and this comment is out of date.
At first glance it seems like we could just drop this code
entirely now, but it's necessary for the final test, which
was added later. That test corrupts the repository by
temporarily removing its objects, which means we need to
have some objects to move.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every once in a while our explicit .gitignore files get out of sync
when our build process learns to create new artifacts, like test
helper executables, but the .gitignore files are not updated
accordingly.
Use Travis CI to help catch such issues earlier: check that there are
no untracked files at the end of any build jobs building Git (i.e. the
64 bit Clang and GCC Linux and OSX build jobs, plus the GETTEXT_POISON
and 32 bit Linux build jobs) or its documentation, and fail the build
job if there are any present.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Clang and GCC 64 bit Linux build jobs download and store the P4
and Git LFS executables under the current directory, which is the
working tree that we are about to build and test. This means that Git
commands like 'status' or 'ls-files' would list these files as
untracked. The next commit is about to make sure that there are no
untracked files present after the build, and the downloaded
executables in the working tree are interfering with those upcoming
checks.
Therefore, let's download P4 and Git LFS in the home directory,
outside of the working tree.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The -Xours/-Xtheirs merge options were originally defined as a way
to "force" the resolution of 3way textual merge conflicts to take
one side without using your editor, hence did not even trigger in
situations where you would normally not get the <<< === >>> conflict
markers.
This was improved for binary files back in 2012 with a944af1d
("merge: teach -Xours/-Xtheirs to binary ll-merge driver",
2012-09-08).
Teach a similar trick to the codepath that deals with merging two
conflicting changes to symbolic links.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tested-by: Yaroslav Halchenko <yoh@onerussian.com>
Reviewed-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Travis CI dutifully builds and tests each new branch tip, even if its
tree has previously been successfully built and tested. This happens
often enough in contributors' workflows, when a work-in-progress
branch is rebased changing e.g. only commit messages or the order or
number of commits while leaving the resulting code intact, and is then
pushed to a Travis CI-enabled GitHub fork.
This is wasting Travis CI's resources and is sometimes scary-annoying
when the new tip commit with a tree identical to the previous,
successfully tested one is suddenly reported in red, because one of
the OSX build jobs happened to exceed the time limit yet again.
So extend our Travis CI build scripts to skip building commits whose
trees have previously been successfully built and tested. Use the
Travis CI cache feature to keep a record of the object names of trees
that tested successfully, in a plain and simple flat text file, one
line per tree object name. Append the current tree's object name at
the end of every successful build job to this file, along with a bit
of additional info about the build job (commit object name, Travis CI
job number and id). Limit the size of this file to 1000 records, to
prevent it from growing too large for git/git's forever living
integration branches. Check, using a simple grep invocation, in each
build job whether the current commit's tree is already in there, and
skip the build if it is. Include a message in the skipped build job's
trace log, containing the URL to the build job successfully testing
that tree for the first time and instructions on how to force a
re-build. Catch the case when a build job, which successfully built
and tested a particular tree for the first time, is restarted and omit
the URL of the previous build job's trace log, as in this case it's
the same build job and the trace log has just been overwritten.
Note: this won't kick in if two identical trees are on two different
branches, because Travis CI caches are not shared between build jobs
of different branches.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It seems that Travis CI creates the cache directory for us anyway,
even when a previous cache doesn't exist for the current build job.
Alas, this behavior is not explicitly documented, therefore we don't
rely on it and create the cache directory ourselves in those build
jobs that read/write cached data (currently only the prove state).
In the following commit we'll start to cache additional data in every
build job, and will access the cache much earlier in the build
process.
Therefore move creating the cache directory to 'ci/lib-travisci.sh' to
make sure that it exists at the very beginning of every build job.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To make this info message stand out from the regular build job trace
output.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Reviewed-by: Lars Schneider <larsxschneider@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git describe" was taught to dig trees deeper to find a
<commit-ish>:<path> that refers to a given blob object.
* sb/describe-blob:
builtin/describe.c: describe a blob
builtin/describe.c: factor out describe_commit
builtin/describe.c: print debug statements earlier
builtin/describe.c: rename `oid` to avoid variable shadowing
revision.h: introduce blob/tree walking in order of the commits
list-objects.c: factor out traverse_trees_and_blobs
t6120: fix typo in test name
"git merge" learned to pay attention to merge.verifySignatures
configuration variable and pretend as if '--verify-signatures'
option was given from the command line.
* hi/merge-verify-sig-config:
t5573, t7612: clean up after unexpected success of 'pull' and 'merge'
t: add tests for pull --verify-signatures
merge: add config option for verifySignatures
Git has been taught to support an https:// URL used for http.proxy
when using recent versions of libcurl.
* ws/curl-http-proxy-over-https:
http: support CURLPROXY_HTTPS
Error messages from "git rebase" have been somewhat cleaned up.
* ks/rebase-error-messages:
rebase: rebasing can also be done when HEAD is detached
rebase: distinguish user input by quoting it
rebase: consistently use branch_name variable
"git imap-send" did not correctly quote the folder name when
making a request to the server, which has been corrected.
* nm/imap-send-quote-server-folder-name:
imap-send: URI encode server folder
"git version --build-options" learned to report the host CPU and
the exact commit object name the binary was built from.
* js/enhanced-version-info:
version --build-options: report commit, too, if possible
version --build-options: also report host CPU
"git svn" has been updated to strip CRs in the commit messages, as
recent versions of Subversion rejects them.
* ew/svn-crlf:
git-svn: convert CRLF to LF in commit message to SVN
Introduce a helper to simplify code to parse a common pattern that
expects either "--key" or "--key=<something>".
* cc/skip-to-optional-val:
t4045: reindent to make helpers readable
diff: add tests for --relative without optional prefix value
diff: use skip_to_optional_arg_default() in parsing --relative
diff: use skip_to_optional_arg_default()
diff: use skip_to_optional_arg()
index-pack: use skip_to_optional_arg()
git-compat-util: introduce skip_to_optional_arg()
Update the shell prompt script (in contrib/) to strip trailing CR
from strings read from various "state" files.
* ra/prompt-eread-fix:
git-prompt: fix reading files with windows line endings
git-prompt: make __git_eread intended use explicit
The leak_pending flag is so awkward to use that multiple comments had to
be added around each occurrence. We only use it for remembering the
commits whose marks we have to clear after checking if the old HEAD is
detached. This is easy, though: We need to do that for the old commit,
the new one -- and for all refs.
Don't bother tracking exactly which commits need their flags cleared,
just nuke all we have in-core. This change is safe because refs can
point at anything, so other program parts can't depend on any kept flags
anyway. And since all refs are loaded we have to basically deal with
all commits anyway, so performance should not be negatively impacted.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The leak_pending flag is so awkward to use that multiple comments had to
be added around each occurrence. We use it for remembering the
prerequisites for the bundle. That is easy, though: We have the
ref_list named "prerequisites" in the header for just that purpose.
Use this original list of prerequisites to check if all of them are
present and to clear their commit marks afterward. The two new loops
are intentionally kept similar to the first one in the function.
Calling parse_object() a second time is expected be quick and successful
in each case -- any errors should have been handled in the first round.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The leak_pending flag is so awkward to use that multiple comments had to
be added around each occurrence. We only use it for remembering the
commits whose marks we have to clear after checking if all of the good
ones are ancestors of the bad one. This is easy, though: We need to do
that for the bad and good commits, of course.
Let check_good_are_ancestors_of_bad() create and own the array of bad
and good commits, and use it to clear the commit marks as well.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a function for clearing the commit marks of all in-core commit
objects. It's similar to clear_object_flags(), but more precise, since
it leaves the other object types alone. It still has to iterate through
them, though.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass the entries of the commit array directly to clear_commit_marks_1()
instead of adding them to a commit_list first. The function clears the
commit and any first parent without allocation; only higher numbered
parents are added to a list for later treatment. This change extends
that optimization to clear_commit_marks_many().
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the collision detecting SHA-1 implementation by default even when
NO_OPENSSL is set.
Setting NO_OPENSSL=UnfortunatelyYes has implied BLK_SHA1=1 ever since
the former was introduced in dd53c7ab29 (Support for NO_OPENSSL,
2005-07-29). That implication should have been removed when the
default SHA-1 implementation changed from OpenSSL to DC_SHA1 in
e6b07da278 (Makefile: make DC_SHA1 the default, 2017-03-17). Finish
what that commit started by removing the BLK_SHA1 fallback setting so
the default DC_SHA1 implementation will be used.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before 425a28e0a4 (diff-lib: allow ita entries treated as "not yet exist
in index" - 2016-10-24) there are never "new files" in the index, which
essentially disables rename detection because we only detect renames
when a new file appears in a diff pair.
After that commit, an i-t-a entry can appear as a new file in "git
diff-files". But the diff callback function in wt-status.c does not
handle this case and produces incorrect status output.
PS. The reader may notice that this patch adds a new xstrdup() but not
a free(). Yes we leak memory (the same for head_path). But wt_status
so far has been short lived, this leak should not matter in
practice.
Noticed-by: Alex Vandiver <alexmv@dropbox.com>
Helped-by: Igor Djordjevic <igor.d.djordjevic@gmail.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These field "head_path" is used for rename display only. In the next
patch we introduce another rename pair where the rename source is no
longer HEAD. Rename it to something more generic.
While at there, rename "score" as well and store the rename diff code
in a separate field instead of hardcoding key[0] (i.e. diff-index) in
porcelain v2 code.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This field can have two values (2 for copy). Use this name instead for
clarity. Many places have already used this constant.
Note, the detect_rename assignments in merge-recursive.c remain
unchanged because it's actually a boolean there.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
