Change the option parsing logic in revision.c to accept separate forms
like `-S foo' in addition to `-Sfoo'. The rest of git already accepted
this form, but revision.c still used its own option parsing.
Short options affected are -S<string>, -l<num> and -O<orderfile>, for
which an empty string wouldn't make sense, hence -<option> <arg> isn't
ambiguous.
This patch does not handle --stat-name-width and --stat-width, which are
special-cases where diff_long_opt do not apply. They are handled in a
separate patch to ease review.
Original patch by Matthieu Moy, plus refactoring by Jonathan Nieder.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, git uses the version string as the signature for all
patches output by format-patch. Many employers (mine included)
require the use of a signature on all outgoing mails. In a
format-patch | send-email workflow there isn't an easy way to modify
the signature without breaking the pipe and manually replacing the
version string with the signature required. Instead of doing all that
work, add an option (--signature) and a config variable
(format.signature) to replace the default git version signature when
formatting patches.
This does modify the original behavior of format-patch a bit. First
off the version string is now placed in the cover letter by default.
Secondly, once the configuration variable format.signature is added
to the .config file there is no way to revert back to the default
git version signature. Instead, specifying the --no-signature option
will remove the signature from the patches entirely.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given that "git show" always shows some diff and does not walk the history
by default, it is natural to expect "git show --first-parent" to show the
difference between the given commit and its first parent. It also would
be natural, given that "--cc" is the default, "git show -m" to show
pairwise difference from each of the parents.
We however always defaulted to --cc and there was no way to turn it off.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, "show" defaulted to "show --cc" (dense combined patch), but
asking for combined patch with "show -c" didn't turn the patch output
format on; the placement of this logic in setup_revisions() dates back to
cd2bdc5 (Common option parsing for "git log --diff" and friends,
2006-04-14).
This unfortunately cannot be done as a trivial change of "if dense
combined is asked, default to patch format" done in setup_revisions() to
"if any combined is asked, default to patch format", as "diff-tree -c"
needs to default to raw, while "diff-tree --cc" needs to default to patch,
and they share the codepath. These command specific defaults are now
handled in the new "tweak" callback that can be customized by individual
command implementations.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --graph --oneline --decorate --all' is a useful way to get a
general overview of the repository state, similar to 'gitk --all'.
Let it indicate the position of HEAD by loading that ref too, so that
the --decorate code can see it.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit de435ac0 changed the behavior of --decorate from printing the
full ref (e.g., "refs/heads/master") to a shorter, more human-readable
version (e.g., just "master"). While this is nice for human readers,
external tools using the output from "git log" may prefer the full
version.
This patch introduces an extension to --decorate to allow the caller to
specify either the short or the full versions.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"tag: v1.6.2.5" looks much better than "tag: refs/tags/v1.6.2.5".
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example:
git format-patch --numbered-files --stdout --attach HEAD~~
will create two messages with files 1 and 2 attached respectively.
There is no effect when using --numbered-files and --stdout together
without an --attach or --inline, the --numbered-files option will be
ignored. Add a test to show this.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently when format-patch is used with --attach or --inline the patch
attachment has the SHA1 of the commit for its filename. This replaces
the SHA1 with the filename used by format-patch when outputting to
files.
Fix tests relying on the SHA1 output and add a test showing how the
--suffix option affects the attachment filename output.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/gcov:
Test git-patch-id
Test rev-list --parents/--children
Test log --decorate
Test fsck a bit harder
Test log --graph
Test diff --dirstat functionality
Test that diff can read from stdin
Support coverage testing with GCC/gcov
This is only a very rudimentary test, but it was untested before.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
tests: fix "export var=val"
Skip timestamp differences for diff --no-index
Documentation/git-push: --all, --mirror, --tags can not be combined
We display empty diffs for files whose timestamps have changed.
Usually, refreshing the index makes those empty diffs go away.
However, when not using the index they are not very useful and
there is no option to suppress them.
This forces on the skip_stat_unmatch option for diff --no-index,
suppressing any empty diffs. This option is also used for diffs
against the index when "diff.autorefreshindex" is set, but that
option does not apply to diff --no-index.
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git log --abbrev-commit' added an ellipsis to all commit names that
were abbreviated. This was particularly annoying if you wanted to
cut&paste the sha1 from the terminal, since selecting by word would
pick up '...' too.
So use find_unique_abbrev() instead of diff_unique_abbrev() in all
log-related commit sha1 printing routines, and also change the
formatting of the 'Merge: parent1 parent2' line output via
pretty_print_commit().
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Accept -- as an "end of options" marker even when using --no-index.
Previously, the -- triggered a "normal" index/tree diff and subsequently
failed because of the unrecognized (in that mode) --no-index.
Note that the second loop can treat '--' as a normal option, because
the preceding checks ensure it is the third-to-last argument.
While at it, fix the parsing of "-q" option in --no-index mode as well.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch is most commonly used for multiple patches at once when
sending a patchset, in which case we want to number the patches; on
the other hand, single patches are not usually expected to be
numbered.
In other words, the typical behavior expected from format-patch is the
one obtained by enabling autonumber, so we set it to be the default.
Users that want to disable numbering for a particular patchset can do
so with the existing -N command-line switch. Users that want to
change the default behavior can use the format.numbering config key.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Test-updates-by: Jeff King <peff@peff.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the message of commit 0fe7c1de16,
"git diff" with three or more trees expects the merged tree first followed by
the parents, in order. However, this command reversed the order of its
arguments, resulting in confusing diffs. A comment /* Again, the revs are all
reverse */ suggested there was a reason for this, but I can't figure out the
reason, so I removed the reversal of the arguments. Test case included.
Signed-off-by: Matt McCutchen <matt@mattmccutchen.net>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This patch makes two small changes to improve the output of --inline
and --attach.
The first is to write a newline preceding the boundary. This is needed because
MIME defines the encapsulation boundary as including the preceding CRLF (or in
this case, just LF), so we should be writing one. Without this, the last
newline in the pre-diff content is consumed instead.
The second change is to always write the line termination character
(default: newline) even when using --inline or --attach. This is simply to
improve the aesthetics of the resulting message. When using --inline an email
client should render the resulting message identically to the non-inline
version. And when using --attach this adds a blank line preceding the
attachment in the email, which is visually attractive.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even if "foo" and/or "bar" does not exist in index, "git diff foo bar"
should not change behaviour drastically from "git diff foo bar baz" or
"git diff foo". A feature that "sometimes works and is handy" is an
unreliable cute hack.
"git diff foo bar" outside a git repository continues to work as a more
colourful alternative to "diff -u" as before.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Earlier, overly-long onelines would not be wrapped at all, and indented
with 6 spaces.
Instead, we now wrap around at 72 characters, with a first-line indent
of 2 spaces, and the rest with 4 spaces.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --cover-letter is provided, generate a cover letter message before
the patches, numbered 0.
Original patch thanks to Johannes Schindelin
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes an unnecessary empty line that we add to the log message when
we generate diffs, but don't actually end up printing any due to having
DIFF_FORMAT_NO_OUTPUT set.
This can happen with pickaxe or with rename following. The reason is that
we normally add an empty line between the commit and the diff, but we do
that even for the case where we've then suppressed the actual printing of
the diff.
This also updates a couple of tests that assumed the extraneous empty
line would exist at the end of output.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* maint:
Document -<n> for git-format-patch
glossary: add 'reflog'
diff --no-index: fix --name-status with added files
Don't smash stack when $GIT_ALTERNATE_OBJECT_DIRECTORIES is too long
Without this patch, an added file would be reported as /dev/null.
Noticed by David Kastrup.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This change lets you use the format.subjectprefix config option to override the
default subject prefix.
Signed-off-by: Adam Roben <aroben@apple.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add testcase for format-patch --subject-prefix support.
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Panagiotis Issaris reports that some MUAs seem not to like
folded "content-type" and "content-disposition" headers, so this
makes format-patch --attach output to avoid them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The existing --attach option did not create a true "attachment"
but multipart/mixed with Content-Disposition: inline. It should
have been with Content-Disposition: attachment.
Introduce --inline to add multipart/mixed that is inlined, and
make --attach to create an attachement.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds --summary output in addition to the --stat to the
output from git-format-patch by default.
I think additions, removals and filemode changes are rare but
notable events and always showing it makes sense.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes "git log/diff --summary" imply recursive behaviour,
whose effect is summarized in one test output:
--- a/t/t4013/diff.diff-tree_--pretty_--root_--summary_initial
+++ b/t/t4013/diff.diff-tree_--pretty_--root_--summary_initial
@@ -5,7 +5,7 @@ Date: Mon Jun 26 00:00:00 2006 +0000
Initial
- create mode 040000 dir
+ create mode 100644 dir/sub
create mode 100644 file0
create mode 100644 file2
$
When a file is created in a subdirectory, we used to say just
the directory name only when that directory also was created,
which did not make sense from two reasons. It is not any more
significant to create a new file in a new directory than to
create a new file in an existing directory, and even if it were,
reportinging the new directory name without saying the actual
filename is not useful.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes one test commit in the sequence to have more than
one lines of commit log. A few output formats (--pretty=email
aka format-patch and --pretty=oneline) need to behave
differently on single and multi-line log, and this change will
help catching breakages.
Signed-off-by: Junio C Hamano <junkio@cox.net>
These are updates to the test vector that shows the "incompatibility" of
the new output code. The changes are actually the good ones, so instead
of keeping the older output we adjust the test to the new code.
Signed-off-by: Junio C Hamano <junkio@cox.net>
