Not all platforms have declared 'unsigned long' to be a 64 bit value,
but we want to support a 64 bit packfile (or close enough anyway)
in the near future as some projects are getting large enough that
their packed size exceeds 4 GiB.
By using off_t, the POSIX type that is declared to mean an offset
within a file, we support whatever maximum file size the underlying
operating system will handle. For most modern systems this is up
around 2^60 or higher.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As we technically try to support up to a maximum of 2**32-1 objects
in a single packfile we should act like it and use unsigned 32 bit
integers for all of our object counts and progress output.
This change does not modify everything in pack-objects that probably
needs to change to fully support the maximum of 2**32-1 objects.
I'm intentionally breaking the improvements into slightly smaller
commits to make them easier to follow.
No logic change should be occuring here, with the exception that
some comparsions will now work properly when the number of objects
exceeds 2**31-1.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As we permit up to 2^32-1 objects in a single packfile we cannot
use a signed int to represent the object offset within a packfile,
after 2^31-1 objects we will start seeing negative indexes and
error out or compute bad addresses within the mmap'd index.
This is a minor cleanup that does not introduce any significant
logic changes. It is roach free.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We shouldn't attempt to assign constant strings into char*, as the
string is not writable at runtime. Likewise we should always be
treating unsigned values as unsigned values, not as signed values.
Most of these are very straightforward. The only exception is the
(unnecessary) xstrdup/free in builtin-branch.c for the detached
head case. Since this is a user-level interactive type program
and that particular code path is executed no more than once, I feel
that the extra xstrdup call is well worth the easy elimination of
this warning.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If an index is corrupt, or is simply too new for us to understand,
we were leaking the mmap that held the entire content of the index.
This could be a considerable size on large projects, given that
the index is at least 24 bytes * nr_objects.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because we are currently cheating and never supplying the delta base
for an OBJ_OFS_DELTA we get a random SHA-1 in the delta base field.
Instead lets clear the hash out so its at least all 0's. This is
somewhat more obvious that something fishy is going on, like we
don't actually have the SHA-1 of the base handy. :)
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds support to archimport for remapping the branch
names to match those used in git more closely. This is useful
for projects that migrate to git (as opposed to users that want
to use git on Arch-based projects). For example, one can choose
an Arch branch name and call it "master".
The new command-line syntax works even if there is a colon in
a branch name, since only the part after the last colon is taken
to be the git name (git does not allow colons in branch names).
The new feature is implemented so that archives rotated every
year can also be remapped into a single git archive.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
They test the behaviour with just a URL in the command line.
Signed-off-by: Santi B,Ai(Bjar <sbejar@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This failure to catch the failure of write_ref_sha1 was noticed
by Bill Lear. The ref will not update if the log file could not
be appended to (due to file permissions problems). Such a failure
should be flagged as a failure to update the ref, so that the client
knows the push did not succeed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If read_header() fails, it returns <0, not 0. Further, an open(/dev/null)
was not checked for errors.
Also, this adds two tests to make sure that the bundle file looks
correct, by checking if it has the header has the expected form, and that
the pack contains the right amount of objects.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
There is no need to escape HTML tag's attributes in CGI.pm
HTML methods (like CGI::a()), because CGI.pm does attribute
escaping automatically.
$cgi->a({ ... -attribute => atribute_value }, tag_contents)
is translated to
<a ... attribute="attribute_value">tag_contents</a>
The rules for escaping attribute values (which are string contents) are
different. For example you have to take care about escaping embedded '"'
and "'" characters; CGI::a() does that for us automatically.
CGI::a() does not HTML escape tag_contents; we would need to write
<a href="URL">some <b>bold</b> text</a>
for example. So we use esc_html (or esc_path) to escape tag_contents
as needed.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
- print output file name for .c files
- suppress output of the names of subdirectories when make changes into them
- use GEN prefix for makefile generation in perl/
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The test was recently broken to expect sed to leave the
incomplete line at the end without newline.
POSIX says that output of the pattern space is to be followed by
a newline, while GNU adds the newline back only when it was
stripped when input. GNU behaviour is arguably more intuitive
and nicer, but we should not depend on it.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Acked-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When the list is truly limited and get_revision_1() returned NULL,
the code incorrectly returned it without switching to boundary emiting
mode. Silly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change to use explicitly function call cgi->escapHTML().
This fix the problem on some systems that escapeHTML() is not
functioning, as default CGI is not setting 'escape' parameter.
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the code to set SHOWN on the commit from get_revision_1()
back to get_revision(), so that the bit means what it originally
meant: this commit has been given back to the caller.
Also it fixes the --reverse breakage Dscho pointed out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
verify_bundle() returned with an error early only when all
prerequisite commits were missing. It should error out much
earlier when some are missing.
When the rev-list is limited in ways other than revision range
(e.g. --max-count or --max-age), create_bundle() listed all
positive refs given from the command line as if they are
available, but resulting pack may not have some of them. Add a
logic to make sure all of them are included, and error out
otherwise.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes the flag internally used by revision traversal to
decide which commits are indeed boundaries and renames it to
CHILD_SHOWN. builtin-bundle uses the symbol for its
verification, but I think the logic it uses it is wrong. The
flag is still useful but it is local to the git-bundle, so it is
renamed to PREREQ_MARK.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the boundary processing in the commit walker. It
- rips out the boundary logic from the commit walker. Placing
"negative" commits in the revs->commits list was Ok if all we
cared about "boundary" was the UNINTERESTING limiting case,
but conceptually it was wrong.
- makes get_revision_1() function to walk the commits and return
the results as if there is no funny postprocessing flags such
as --reverse, --skip nor --max-count.
- makes get_revision() function the postprocessing phase:
If reverse is given, wait for get_revision_1() to give
everything that it would normally give, and then reverse it
before consuming.
If skip is given, skip that many before going further.
If max is given, stop when we gave out that many.
Now that we are about to return one positive commit, mark
the parents of that commit to be potential boundaries
before returning, iff we are doing the boundary processing.
Return the commit.
- After get_revision() finishes giving out all the positive
commits, if we are doing the boundary processing, we look at
the parents that we marked as potential boundaries earlier,
see if they are really boundaries, and give them out.
It loses more code than it adds, even when the new gc_boundary()
function, which is purely for early optimization, is counted.
Note that this patch is purely for eyeballing and discussion
only. It breaks git-bundle's verify logic because the logic
does not use BOUNDARY_SHOW flag for its internal computation
anymore. After we correct it not to attempt to affect the
boundary processing by setting the BOUNDARY_SHOW flag, we can
remove BOUNDARY_SHOW from revision.h and use that bit assignment
for the new CHILD_SHOWN flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Per Junio's suggestion we are setting 'make' to be quiet by default,
with `make V=1` available to force GNU make back to its default
behavior of showing each command it is running.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I find it difficult to see compiler warnings amongst the massive
spewing produced by GNU make as it works through our productions.
This is especially true if CFLAGS winds up being rather long, due
to a large number of -W options being enabled and due to a number
of -D options being configured/required by my platform.
By defining QUIET_MAKE (e.g. make QUIET_MAKE=YesPlease) during
compilation users will get a less verbose output, such as:
...
CC builtin-grep.c
builtin-grep.c:187: warning: 'external_grep' defined but not used
CC builtin-init-db.c
CC builtin-log.c
CC builtin-ls-files.c
CC builtin-ls-tree.c
...
The verbose (normal make) output is still the default.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-gui: Make 'make' quieter by default
git-gui: Remove unnecessary /dev/null redirection.
git-gui: Don't create empty (same tree as parent) commits.
git-gui: Add Reset to the Branch menu.
git-gui: Relocate the menu/transport menu code.
* 'master' of git://repo.or.cz/git-gui:
git-gui: Make 'make' quieter by default
git-gui: Remove unnecessary /dev/null redirection.
git-gui: Don't create empty (same tree as parent) commits.
git-gui: Add Reset to the Branch menu.
git-gui: Relocate the menu/transport menu code.
The handcrafted built-in rev-list lookalike forgot to mark the trees
and blobs contained in the boundary commits uninteresting, resulting
in unnecessary objects in the pack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
To fit nicely into the output of the git.git project's own quieter
Makefile, we want to make the git-gui Makefile nice and quiet too.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Somewhere along the line (in abd6970a) git-revert.sh learned to
omit the private object name from the new commit message *unless*
-x was supplied on the command line by the user.
The way this was implemented is really non-obvious in the original
script. Setting replay=t (the default) means we don't include the
the private object name, while setting reply='' (the -x flag) means
we should include the private object name. These two settings now
relate to the replay=1 and replay=0 cases in the C version, so we
need to negate replay to test it is 0.
I also noticed the C version was adding an extra LF in the -x case,
where the older git-revert.sh was not.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master-for-junio' of git://repo.or.cz/git/fastimport:
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
* maint:
Fix diff-options references in git-diff and git-format-patch
Add definition of <commit-ish> to the main git man page.
Begin SubmittingPatches with a check list
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
Most of the git-diff-* documentation used [<common diff options>]
instead of [--diff-options], so make that change in git-diff and
git-format-patch.
In addition, git-format-patch didn't include the meanings of the diff
options.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'maint-for-junio' of git://repo.or.cz/git/fastimport:
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
It seems that some people prefer a short list to a long text. But even for
the latter group, a quick reminder list is useful. So, add a check list to
Documentation/SubmittingPatches of what to do to get your patch accepted.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
[sp: Minor evil merge to deal with type_names array moving
to be private in 'master'.]
Johannes Sixt noticed during one of his own imports that fast-import
did not fail if a non-existant commit is referenced by SHA-1 value
as an argument to the 'merge' command. This allowed the user to
unknowingly create commits that would fail in fsck, as the commit
contents would not be completely reachable.
A side effect of this bug was that a frontend process could mark
any SHA-1 object (blob, tree, tag) as a parent of a merge commit.
This should also fail in fsck, as the commit is not a valid commit.
We now use the same rule as the 'from' command. If a commit is
referenced in the 'merge' command by hex formatted SHA-1 then the
SHA-1 must be a commit or a tag that can be peeled back to a commit,
the commit must already exist, and must be readable by the core Git
infrastructure code. This requirement means that the commit must
have existed prior to fast-import starting, or the commit must have
been flushed out by a prior 'checkpoint' command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt noticed that a 'reset' command applied to a branch that
is already active in the branch LRU cache can cause fast-import to
relink the same branch into the LRU cache twice. This will cause
the LRU cache to contain a cycle, making unload_one_branch run in an
infinite loop as it tries to select the oldest branch for eviction.
I have trivially fixed the problem by adding an active bit to
each branch object; this bit indicates if the branch is already
in the LRU and allows us to avoid trying to add it a second time.
Converting the pack_id field into a bitfield makes this change take
up no additional memory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-fsck always exited with status 0, which was a bit sloppy.
This makes it exit with a non-zero status when errors are
found. The error code is an OR'ed result of:
1 if corrupted objects are found.
2 if objects that are ought to be reachable are missing or corrupt.
For example, it would exit with 1 in a repository with an
unreachable corrupt object. If a tree object of the HEAD commit
is corrupt, you would get 3.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We did not detect broken loose object files, either when
underlying inflate() signalled the breakage, nor inflate()
finished and we had garbage trailing at the end. We do better
now.
We also make unpack_sha1_file() a static function to
sha1_file.c, since it is not used by anybody outside.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When "git fsck" without --full found a loose object missing
because it was broken, it mistakenly thought it was not parsed
because we found it in one of the packs. Back when this code
was written, we did not have a way to explicitly check if we
have the object in pack, but we do now.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add git-blame as a candidate to the byte-compilation.
batch-byte-compile is the prefered way to byte-compile files in
batch mode. Use it instead of the interactive function.
Signed-off-by: Xavier Maillard <zedek@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update the main git.html page to point at 1.5.0.3 documentation.
Update draft 1.5.1 release notes with what we have so far.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Panagiotis Issaris reports that some MUAs seem not to like
folded "content-type" and "content-disposition" headers, so this
makes format-patch --attach output to avoid them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The existing --attach option did not create a true "attachment"
but multipart/mixed with Content-Disposition: inline. It should
have been with Content-Disposition: attachment.
Introduce --inline to add multipart/mixed that is inlined, and
make --attach to create an attachement.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
