Teach "git replace --edit" mode a "--raw" option to allow
editing the bare-metal representation data of objects.
* jk/replace-edit-raw:
replace: add a --raw mode for --edit
Teach "git replace" an "--edit" mode.
* cc/replace-edit:
replace: use argv_array in export_object
avoid double close of descriptors handed to run_command
replace: replace spaces with tabs in indentation
An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
"git clone -b brefs/tags/bar" would have mistakenly thought we were
following a single tag, even though it was a name of the branch,
because it incorrectly used strstr().
* jc/fix-clone-single-starting-at-a-tag:
builtin/clone.c: detect a clone starting at a tag correctly
"%G" (nothing after G) is an invalid pretty format specifier, but
the parser did not notice it as garbage.
* jk/pretty-G-format-fixes:
move "%G" format test from t7510 to t6006
pretty: avoid reading past end-of-string with "%G"
t7510: check %G* pretty-format output
t7510: test a commit signed by an unknown key
t7510: use consistent &&-chains in loop
t7510: stop referring to master in later tests
Code to avoid adding the same alternate object store twice was
subtly broken for a long time, but nobody seems to have noticed.
* rs/fix-alt-odb-path-comparison:
sha1_file: avoid overrunning alternate object base string
A handful of code paths had to read the commit object more than
once when showing header fields that are usually not parsed. The
internal data structure to keep track of the contents of the commit
object has been updated to reduce the need for this double-reading,
and to allow the caller find the length of the object.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
During "git rebase --merge", a conflicted patch could not be
skipped with "--skip" if the next one also conflicted.
* bc/fix-rebase-merge-skip:
rebase--merge: fix --skip with two conflicts in a row
* maint-1.8.5:
annotate: use argv_array
t7300: repair filesystem permissions with test_when_finished
enums: remove trailing ',' after last item in enum
Simplify the code and get rid of some magic constants by using
argv_array to build the argument list for cmd_blame. Be lazy and let
the OS release our allocated memory, as before.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MinGW and MSVC before 2010 don't define ELOOP, use EMLINK (aka "Too many
links") instead.
Signed-off-by: Karsten Blees <blees@dcon.de>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using `git format-patch --ignore-if-in-upstream` we are only
allowed to give a single revision range. In the next commit we will
want to add an additional exclusion revision in order to handle fork
points correctly, so convert `git-rebase--am` to use a symmetric
difference with `--cherry-pick --right-only`.
This does not change the result of the format-patch invocation, just how
we spell the arguments.
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When adding alternate object directories, we try not to add the
directory of the current repository to avoid cycles. Unfortunately,
that test was broken, since it compared an absolute with a relative
path.
Signed-off-by: Ephrim Khong <dr.khong@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test creates some unrelated commits in two separate repositories,
and then fetches from one to the other. Since the commit creation
happens in a subshell, the first commit in each ends up with the
same test_tick value. When fetch-pack looks at the two root commits
"unrelated1" and "new-too", the exact sequence of ACKs is different
depending on which one it pulls out of the queue first.
With the current code, it happens to be "unrelated1" (though this is not
at all guaranteed by the prio_queue data structure, it is deterministic
for this particular sequence of input). We see the ready-ACK, and the
test succeeds.
With the stable queue, we reliably get "new-too" out (since it is our
local tip, it is added to the queue before we even talk to the remote).
We never see a ready-ACK, and the test fails due to the grep on the
TRACE_PACKET output at the end (the fetch itself succeeds as expected).
I'm really not quite clear on what's supposed to be going on in the
test. I can make it pass with this change.
git commit -m with some iso8859-1 encoded stuff is doomed to fail in MinGW,
because Windows don't let you pass encoded bytes to a process (CreateProcessW
always takes a UTF-16LE encoded string).
It is safe to pass the iso8859-1 message using a file or a pipe.
Thanks-to: Karsten Blees <blees@dcon.de>
Author: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Changes opendir/readdir to use Windows Unicode APIs and convert between
UTF-8/UTF-16.
Removes parameter checks that are already covered by xutftowcs_path. This
changes detection of ENAMETOOLONG from MAX_PATH - 2 to MAX_PATH (matching
is_dir_empty in mingw.c). If name + "/*" or the resulting absolute path is
too long, FindFirstFile fails and errno is set through err_win_to_posix.
Increases the size of dirent.d_name to accommodate the full
WIN32_FIND_DATA.cFileName converted to UTF-8 (UTF-16 to UTF-8 conversion
may grow by factor three in the worst case).
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Replaces Windows "ANSI" APIs dealing with file- or path names with their
Unicode equivalent, adding UTF-8/UTF-16LE conversion as necessary.
The dirent API (opendir/readdir/closedir) is updated in a separate commit.
Adds trivial wrappers for access, chmod and chdir.
Adds wrapper for mktemp (needed for both mkstemp and mkdtemp).
The simplest way to convert a repository with legacy-encoded (e.g. Cp1252)
file names to UTF-8 ist to checkout with an old msysgit version and
"git add --all & git commit" with the new version.
Includes a fix for bug reported by John Chen:
On Windows XP (not Win7), directories cannot be deleted while a find handle
is open, causing "Deletion of directory '...' failed. Should I try again?"
prompts.
Prior to this commit, these failures were silently ignored due to
strbuf_free in is_dir_empty resetting GetLastError to ERROR_SUCCESS.
Close the find handle in is_dir_empty so that git doesn't block deletion
of the directory even after all other applications have released it.
Reported-by: John Chen <john0312@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Stepan Kasal <kasal@ucw.cz>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are traversing to find merge bases, we keep our
usual commit_list of commits to process, sorted by their
commit timestamp. As we add each parent to the list, we have
to spend "O(width of history)" to do the insertion, where
the width of history is the number of simultaneous lines of
development.
If we instead use a heap-based priority queue, we can do
these insertions in "O(log width)" time. This provides minor
speedups to merge-base calculations (timings in linux.git,
warm cache, best-of-five):
[before]
$ git merge-base HEAD v2.6.12
real 0m3.251s
user 0m3.148s
sys 0m0.104s
[after]
$ git merge-base HEAD v2.6.12
real 0m3.234s
user 0m3.108s
sys 0m0.128s
That's only an 0.5% speedup, but it does help protect us
against pathological cases.
While we are munging the "interesting" function, we also
take the opportunity to give it a more descriptive name, and
convert the return value to an int (we returned the first
interesting commit, but nobody ever looked at it).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If two items are added to a prio_queue and compare equal,
they currently come out in an apparently random order (this
order is deterministic for a particular sequence of
insertions and removals, but does not necessarily match the
insertion order). This makes it unlike using a date-ordered
commit_list, which is one of the main types we would like to
replace with it (because prio_queue does not suffer from
O(n) insertions).
We can make the priority queue stable by keeping an
insertion counter for each element, and using it to break
ties. This does increase the memory usage of the structure
(one int per element), but in practice it does not seem to
affect runtime. A best-of-five "git rev-list --topo-order"
on linux.git showed less than 1% difference (well within the
run-to-run noise).
In an ideal world, we would offer both stable and unstable
priority queues (the latter to try to maximize performance).
However, given the lack of a measurable performance
difference, it is not worth the extra code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When manipulating the priority queue's heap, we frequently
have to compare and swap heap entries. As we are storing
only void pointers right now, this is quite easy to do
inline in a few lines. However, when we start using a more
complicated heap entry in a future patch, that will get
longer. Factoring out these operations lets us make future
changes in one place. It also makes the code a little
shorter and more readable.
Note that we actually accept indices into the queue array
instead of pointers. This is slightly less flexible than
passing pointers-to-pointers (we could not swap items from
unrelated arrays, but we would not want to), but will make
further refactoring simpler (and lets us avoid repeating
"queue->array" at each callsite, which led to some long
lines).
And finally, note that we are cleaning up an accidental use
of a "struct commit" pointer to hold a temporary entry
during swap. Even though we currently only use this code for
commits, it is supposed to be type-agnostic. In practice
this didn't matter anyway because we never dereferenced the
commit pointer (and on most systems, the pointer values
themselves are interchangeable between types).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin/verify-commit.c was added in commit d07b00b ("verify-commit:
scriptable commit signature verification", 2014-06-23), update
.gitignore to ignore the generated file.
Signed-off-by: Øyvind A. Holm <sunny@sunbase.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes a segfault in git-status with long paths on Windows,
where PATH_MAX is only 260.
This also fixes the problem of silently ignoring .gitignore if the
full path exceeds PATH_MAX. Now add_excludes_from_file() will report
if it gets ENAMETOOLONG.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no actual nested struct here. Move it out for clarity.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Karsten Blees <blees@dcon.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the revert command updates the work tree as expected (for
submodule changes which don't result in conflicts). Add a helper function
to first revert the checked out target commit to make the last revert
produce the to-be-tested work tree.
Set the KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT and
KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR switches to
document that revert has the similar failures.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the stash apply command updates the work tree as expected for
changes which don't result in conflicts. To make that work add a helper
function that uses read-tree to apply the changes of the target commit
to the work tree, then stashes these changes and at last applies that
stash.
Implement the KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES switch
and reuse two other already present switches to expect the known
failure that stash does ignore submodule changes.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the am command updates the work tree as expected (for submodule
changes which don't result in conflicts). To make that work add two
helper functions that use format-patch to create the input for am.
Add the KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
switch to expect the known failure that --no-ff merges attempt to merge
the new files in the former submodule directory with those of the removed
submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the cherry-pick command updates the work tree as expected (for
submodule changes which don't result in conflicts).
Set KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
and KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR to
document that cherry-pick has the same --no-ff known failures merge has.
Implement the KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT switch to expect
the known failure that while cherry picking just a SHA-1 update for an
ignored submodule the commit incorrectly fails with "The previous
cherry-pick is now empty, possibly due to conflict resolution.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the pull command updates the work tree as expected (for
submodule changes which don't result in conflicts) when used without
arguments or with the '--ff', '--ff-only' and '--no-ff' flag each. Add
helper functions to reset the branch to be updated to to the current
HEAD so that pull is doing the transition from HEAD to the given branch.
Set KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
and KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR to
document that pull has the same --no-ff known failures merge has.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the rebase command updates the work tree as expected for
changes which don't result in conflicts. To make that work add two
helper functions that add a commit only touching files and then
revert it. This allows to rebase the target commit over these two
and to compare the result.
Set KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR to
document that "replace directory with submodule" fails for an
interactive rebase because a directory "sub1" already exists.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the merge command updates the work tree as expected (for
submodule changes which don't result in conflicts) when used without
arguments or with the '--ff', '--ff-only' and '--no-ff' flag.
Implement the KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR
switch to expect the known failure that --no-ff merges do not create the
empty submodule directory.
The KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
switch is also implemented to expect the known failure that --no-ff
merges attempt to merge the new files in the former submodule directory
with those of the removed submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the bisect command updates the work tree as expected. To make
that work with the new submodule test framework a git_bisect helper
function is added. This adds a commit after the one given to be switched
to and makes that one the bad commit. The starting point is then given to
bisect as the good commit which makes bisect change the work tree to the
commit in between, which is the commit given.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the reset command updates the work tree as expected for changes
with '--keep', '--merge' (for changes which don't result in conflicts) and
'--hard'.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the read-tree command updates the work tree as expected for
changes which don't result in conflicts with the '-m' and '--reset' flag.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the apply command updates the work tree as expected for the
'--index' and the '--3way' options (for submodule changes which don't
result in conflicts).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test that the checkout command updates the work tree as expected with
and without the '-f' flag.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add this test library to simplify covering all combinations of submodule
update scenarios without having to add those to a test of each work tree
manipulating command over and over again.
The functions test_submodule_switch() and test_submodule_forced_switch()
are intended to be called from a test script with a single argument. This
argument is either a work tree manipulating command (including any command
line options) or a function (when more than a single git command is needed
to switch work trees from the current HEAD to another commit). This
command (or function) is passed a target branch as argument. The two new
functions check that each submodule transition is handled as expected,
which currently means that submodule work trees are not affected until
"git submodule update" is called. The "forced" variant is for commands
using their '-f' or '--hard' option and expects them to overwrite local
modifications as a result. Each of these two functions contains 14
tests_expect_* calls.
Calling one of these test functions the first time creates a repository
named "submodule_update_repo". At first it contains two files, then a
single submodule is added in another commit followed by commits covering
all relevant submodule modifications. This repository is newly cloned into
the "submodule_update" for each test_expect_* to avoid interference
between different parts of the test functions (some to-be-tested commands
also manipulate refs along with the work tree, e.g. "git reset").
Follow-up commits will then call these two test functions for all work
tree manipulating commands (with a combination of all their options
relevant to what they do with the work tree) making sure they work as
expected. Later this test library will be extended to cover merges
resulting in conflicts too. Also it is intended to be easily extendable
for the recursive update functionality, where even more combinations of
submodule modifications have to be tested for.
This version documents two bugs in current Git with expected failures:
*) When a submodule is replaced with a tracked file of the same name the
submodule work tree including any local modifications (and even the
whole history if it uses a .git directory instead of a gitfile!) is
silently removed.
*) Forced work tree updates happily manipulate files in the directory of a
submodule that has just been removed in the superproject (but is of
course still present in the work tree due to the way submodules are
currently handled). This becomes dangerous when files in the submodule
directory are overwritten by files from the new superproject commit, as
any modifications to the submodule files will be lost) and is expected
to also destroy history in the - admittedly unlikely case - the new
commit adds a file named ".git" to the submodule directory.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update ref_transaction_update() do some basic error checking and return
non-zero on error. Update all callers to check ref_transaction_update() for
error. There are currently no conditions in _update that will return error but
there will be in the future. Add an err argument that will be updated on
failure. In future patches we will start doing both locking and checking
for name conflicts in _update instead of _commit at which time this function
will start returning errors for these conditions.
Also check for BUGs during update and die(BUG:...) if we are calling
_update with have_old but the old_sha1 pointer is NULL.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Since all callers now use QUIET_ON_ERR we no longer need to provide an onerr
argument any more. Remove the onerr argument from the ref_transaction_commit
signature.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Call ref_transaction_commit with QUIET_ON_ERR and use the strbuf that is
returned to print a log message if/after the transaction fails.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Change update_ref_write to also update an error strbuf on failure.
This makes the error available to ref_transaction_commit callers if the
transaction failed due to update_ref_sha1/write_ref_sha1 failures.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Make ref_update_reject_duplicates return any error that occurs through a
new strbuf argument. This means that when a transaction commit fails in
this function we will now be able to pass a helpful error message back to the
caller.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Making errno from write_ref_sha1() meaningful, which should fix
* a bug in "git checkout -b" where it prints strerror(errno)
despite errno possibly being zero or clobbered
* a bug in "git fetch"'s s_update_ref, which trusts the result of an
errno == ENOTDIR check to detect D/F conflicts
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Making errno when returning from resolve_ref_unsafe() meaningful,
which should fix
* a bug in lock_ref_sha1_basic, where it assumes EISDIR
means it failed due to a directory being in the way
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Making errno when returning from commit_packed_refs() meaningful,
which should fix
* a bug in "git clone" where it prints strerror(errno) based on
errno, despite errno possibly being zero and potentially having
been clobbered by that point
* the same kind of bug in "git pack-refs"
and prepares for repack_without_refs() to get a meaningful
error message when commit_packed_refs() fails without falling into
the same bug.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
Making errno when returning from remove_empty_directories() more
obviously meaningful, which should provide some peace of mind for
people auditing lock_ref_sha1_basic.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Acked-by: Michael Haggerty <mhagger@alum.mit.edu>
