For raw subjects rfc2047 quoting is needed not only for non-ASCII characters,
but also for any possible rfc2047 in it.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Jeff King <peff@peff.net>
The quote_rfc2047() always adds RFC2047 quoting. To avoid
quoting ASCII subjects, before calling quote_rfc2047()
subject must be tested for non-ASCII characters. This patch
introduces a new quote_subject() function, which performs
the test and calls quote_rfc2047 only if necessary.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Jeff King <peff@peff.net>
The git-send-email always use RFC2047 subject quoting for
files with "broken" encoding - non-ASCII files without
Content-Transfer-Encoding, even for ASCII subjects. This is
harmless but unnecessarily ugly for people reading the raw
headers. This patch skips rfc2047 quoting when the subject
does not need it.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Jeff King <peff@peff.net>
The commit "git-send-email: introduce compose-encoding" introduced
the compose-encoding option to specify the introduction email encoding
(--compose option), but the email Subject encoding was still hardcoded
to UTF-8.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Jeff King <peff@peff.net>
The introduction email (--compose option) have encoding hardcoded to
UTF-8, but invoked editor may not use UTF-8 encoding.
The encoding used by patches can be changed by the "8bit-encoding"
option, but this option does not have effect on introduction email
and equivalent for introduction email is missing.
Added compose-encoding command line option and sendemail.composeencoding
configuration option specify encoding of introduction email.
Signed-off-by: Krzysztof Mazur <krzysiek@podlesie.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We may pick up additional recipients from the format-patch output
files we are sending, in which case it is perfectly valid to leave
the @initial_to empty when the prompt asks. We may want to start
a new discussion thread without replying to anything, and it is
valid to leave $initial_reply_to empty.
An earlier update to avoid y@example.com stuffed in address fields
did not take these two cases into account.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Validate interactive input to "git send-email" to avoid common
mistakes such as saying "y<RETURN>" to sender mail address whose
prompt is given with a correctly guessed default.
* jc/send-email-reconfirm:
send-email: validate & reconfirm interactive responses
People answer 'y' to "Who should the emails appear to be from?" and
'n' to "Message-ID to be used as In-Reply-To for the first email?"
for some unknown reason. While it is possible that your local
username really is "y" and you are sending the mail to your local
colleagues, it is possible, and some might even say it is likely,
that it is a user error.
Fortunately, our interactive prompter already has input validation
mechanism built-in. Enhance it so that we can optionally reconfirm
and allow the user to pass an input that does not validate, and
"softly" require input to the sender, in-reply-to, and recipient to
contain "@" and "." in this order, which would catch most cases of
mistakes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The RFC2047 unquoting, used to parse email addresses in From and Cc
headers, is broken in several ways:
* It erroneously substitutes ' ' for '_' in *the whole* header, even
outside the quoted field. [Noticed by Christoph.]
* It is too liberal in its matching, and happily matches the start
of one quoted chunk against the end of another, or even just
something that looks like such an end. [Noticed by Junio.]
* It fundamentally cannot cope with encodings that are not a
superset of ASCII, nor several (incompatible) encodings in the
same header.
This patch fixes the first two by doing a more careful decoding of
the outer quoting (e.g. "=AB" to represent an octet whose value is
0xAB). Fixing the fundamental issues is left for a future, more
intrusive, patch.
Noticed-by: Christoph Miebach <christoph.miebach@web.de>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The sendemail.multiedit variable is meant to be a boolean.
However, it is not marked as such in the code, which means
we store its value literally. Thus in the do_edit function,
perl ends up coercing it to a boolean value according to
perl rules, not git rules. This works for "0", but "false",
"no", or "off" will erroneously be interpreted as true.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-send-email sends two SMTP EHLOs when using TLS encryption, however
only the first, unencrypted EHLO uses the SMTP domain that can be
optionally specified by the user (--smtp-domain). This is because the
call to hello() that produces the second, encrypted EHLO does not pass
the SMTP domain as an argument, and hence a default of
'localhost.localdomain' is used instead.
Fix by passing in the SMTP domain in this call.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
cec5dae (use new Git::config_path() for aliasesfile, 2011-09-30) broke
the expansion of aliases.
This was caused by treating %config_path_settings, newly introduced in
said patch, like %config_bool_settings instead of like %config_settings.
Copy from %config_settings, making it more readable.
While at it add basic test for expansion of aliases, and for path
expansion, which would catch this error.
Nb. there were a few issues that were responsible for this error:
1. %config_bool_settings and %config_settings despite similar name have
different semantic.
%config_bool_settings values are arrays where the first element is
(reference to) the variable to set, and second element is default
value... which admittedly is a bit cryptic. More readable if more
verbose option would be to use hash reference, e.g.:
my %config_bool_settings = (
"thread" => { variable => \$thread, default => 1},
[...]
%config_settings values are either either reference to scalar variable
or reference to array. In second case it means that option (or config
option) is multi-valued. BTW. this is similar to what Getopt::Long does.
2. In cec5dae (use new Git::config_path() for aliasesfile, 2011-09-30)
the setting "aliasesfile" was moved from %config_settings to newly
introduced %config_path_settings. But the loop that parses settings
from %config_path_settings was copy'n'pasted *wrongly* from
%config_bool_settings instead of from %config_settings.
It looks like cec5dae author cargo-culted this change...
3. 994d6c6 (send-email: address expansion for common mailers, 2006-05-14)
didn't add test for alias expansion to t9001-send-email.sh
Signed-off-by: Cord Seele <cowose@gmail.com>
Tested-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git send-email was not authenticating properly when communicating over
TLS with a server supporting only AUTH PLAIN and AUTH LOGIN. This is
e.g. the standard server setup under debian with exim4 and probably
everywhere where system accounts are used.
The problem (only?) exists when libauthen-sasl-cyrus-perl
(Authen::SASL::Cyrus) is installed. Importing Authen::SASL::Perl
makes Authen::SASL use the perl implementation which works
better.
The solution is based on this forum thread:
http://www.perlmonks.org/?node_id=904354.
This patch is tested by sending it. Without this fix, the interaction with
the server failed like this:
$ git send-email --smtp-encryption=tls --smtp-server=... --smtp-debug=1 change1.patch
...
Net::SMTP::SSL=GLOB(0x238f668)<<< 250-AUTH LOGIN PLAIN
Password:
Net::SMTP::SSL=GLOB(0x238f668)>>> AUTH
Net::SMTP::SSL=GLOB(0x238f668)<<< 501 5.5.2 AUTH mechanism must be specified
5.5.2 AUTH mechanism must be specified
Signed-off-by: Zbigniew Jędrzejewski-Szmek <zbyszek@in.waw.pl>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Most other git commands print a synopsis when passed -h. Make
send-email do the same.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the command cannot make a connection to the SMTP server the error
message to diagnose the broken configuration is issued. However, when an
optional smtp-server-port is given and needs to be reported, the message
lacked a space between "hello=<smtp-domain>" and "port=<smtp-server-port>".
Signed-off-by: Sylvain Rabot <sylvain@abstraction.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ao/send-email-irt:
git-send-email.perl: make initial In-Reply-To apply only to first email
t9001: send-email interation with --in-reply-to and --chain-reply-to
* maint:
imap-send: link against libcrypto for HMAC and others
git-send-email.perl: Deduplicate "to:" and "cc:" entries with names
mingw: do not set errno to 0 on success
If an email address in the "to:" list is in the style
"First Last <email@domain.tld>", ie: not just a bare
address like "email@domain.tld", and the same named
entry style exists in the "cc:" list, the current
logic will not remove the entry from the "cc:" list.
Add logic to better deduplicate the "cc:" list by also
matching the email address with angle brackets.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an initial --in-reply-to is supplied, make it apply only to the
first message; --[no-]chain-reply-to setting are honored by second and
subsequent messages; this is also how the git-format-patch option with
the same name behaves.
Moreover, when $initial_reply_to is asked to the user interactively it
is asked as the "Message-ID to be used as In-Reply-To for the _first_
email", this makes the user think that the second and subsequent
patches are not using it but are considered as replies to the first
message or chained according to the --[no-]chain-reply setting.
Look at the v2 series in the illustration to see what the new behavior
ensures:
(before the patch) | (after the patch)
[PATCH 0/2] Here is what I did... | [PATCH 0/2] Here is what I did...
[PATCH 1/2] Clean up and tests | [PATCH 1/2] Clean up and tests
[PATCH 2/2] Implementation | [PATCH 2/2] Implementation
[PATCH v2 0/3] Here is a reroll | [PATCH v2 0/3] Here is a reroll
[PATCH v2 1/3] Clean up | [PATCH v2 1/3] Clean up
[PATCH v2 2/3] New tests | [PATCH v2 2/3] New tests
[PATCH v2 3/3] Implementation | [PATCH v2 3/3] Implementation
This is the typical behaviour we want when we send a series with cover
letter in reply to some discussion, the new patch series should appear
as a separate subtree in the discussion.
Also update the documentation on --in-reply-to to describe the new
behavior.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/send-email-perl:
send-email: extract_valid_address use qr// regexes
send-email: is_rfc2047_quoted use qr// regexes
send-email: use Perl idioms in while loop
send-email: make_message_id use "require" instead of "use"
send-email: send_message die on $!, not $?
send-email: use (?:) instead of () if no match variables are needed
send-email: sanitize_address use qq["foo"], not "\"foo\""
send-email: sanitize_address use $foo, not "$foo"
send-email: use \E***\Q instead of \*\*\*
send-email: cleanup_compose_files doesn't need a prototype
send-email: unique_email_list doesn't need a prototype
send-email: file_declares_8bit_cte doesn't need a prototype
send-email: get_patch_subject doesn't need a prototype
send-email: use lexical filehandles during sending
send-email: use lexical filehandles for $compose
send-email: use lexical filehandle for opendir
Conflicts:
git-send-email.perl
* sb/send-email-use-to-from-input:
send-email: Don't leak To: headers between patches
send-email: Use To: headers in patch files
Conflicts:
git-send-email.perl
If the first patch in a series has a To: header in the file and the
second patch in the series doesn't the address from the first patch will
be part of the To: addresses in the second patch. Fix this by treating the
to list like the cc list. Have an initial to list come from the command
line, user input and config options. Then build up a to list from each
patch and concatenate the two together before sending the patch. Finally,
reset the list after sending each patch so the To: headers from a patch
don't get used for the next one.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change `while(<$fh>) { my $c = $_' to `while(my $c = <$fh>) {', and
use `chomp $c' instead of `$c =~ s/\n$//g;', the two are equivalent in
this case.
I've also changed the --cccmd test so that we test for the stripping
of whitespace at the beginning of the lines returned from the
--cccmd. I think we probably shouldn't do this, but it was there
already so I haven't changed the behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the use of Sys::Hostname from a "use" to a "require". The
former happens in an implicit BEGIN block and is thus immune from the
if block it's contained in, so it's always loaded.
This should speed up the invocation of git-send-email by a few
milliseconds.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If close fails we want to emit errno, not the return code of whatever
happened to be the child process run.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Perl provides an alternate quote syntax which can make using "" inside
interpolated strings easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There's no reason to explicitly stringify a variable in Perl unless
it's an overloaded object and you want to call overload::StrVal,
otherwise it's just creating a new scalar redundantly.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the regex introduced in a03bc5b to use the \E...\Q escape
syntax instead of using backslashes. It's more readable like this, and
easier to grep for.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's a minor annoyance when you take the painstaking time to setup To:
headers for each patch in a large series, and then go out to send the
series with git-send-email and watch git ignore the To: headers in the
patch files.
Therefore, always add To: headers from a patch file to the To: headers
for that message. Keep the prompt for the blanket To: header so as to
not break scripts (and user expectations). This means even if a patch
has a To: header, git will prompt for the To: address. Otherwise, we'll
need to introduce interface breakage to either request the header for
each patch missing a To: header or default the header to whatever To:
address is found first (be it in a patch or from user input). Both of
these options don't seem very obvious/useful.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Tested-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
