The test fails on Windows since 2dec68c (tests: add missing &&, batch 2).
Even though this test allocates and leaves behind files, subsequent tests
do not depend on this, so it is safe to just skip it.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ao/send-email-irt:
git-send-email.perl: make initial In-Reply-To apply only to first email
t9001: send-email interation with --in-reply-to and --chain-reply-to
* kb/maint-rebase-autosquash:
rebase: teach --autosquash to match on sha1 in addition to message
rebase: better rearranging of fixup!/squash! lines with --autosquash
* mm/phrase-remote-tracking:
git-branch.txt: mention --set-upstream as a way to change upstream configuration
user-manual: remote-tracking can be checked out, with detached HEAD
user-manual.txt: explain better the remote(-tracking) branch terms
Change incorrect "remote branch" to "remote tracking branch" in C code
Change incorrect uses of "remote branch" meaning "remote-tracking"
Change "tracking branch" to "remote-tracking branch"
everyday.txt: change "tracking branch" to "remote-tracking branch"
Change remote tracking to remote-tracking in non-trivial places
Replace "remote tracking" with "remote-tracking"
Better "Changed but not updated" message in git-status
By ignoring the Text-Delta and Prop-Delta node fields, current svn-fe
happily mistakes deltas for full text and instead of cleanly erroring
out, it produces a valid but semantically bogus fast-import stream
when fed a dump file in the modern "svnadmin dump --deltas" format.
Dump file parsers are supposed to ignore header fields they don't
understand (to allow for backward-compatible extensions), but they are
also supposed to check the SVN-fs-dump-format-version header to
prevent misinterpretation of non backward-compatible extensions.
Do so.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jm/mailmap:
t4203: do not let "git shortlog" DWIM based on tty
t4203 (mailmap): stop hardcoding commit ids and dates
mailmap: fix use of freed memory
The reflog-walking mechanism is based on the regular
revision traversal. We just rewrite the parents of each
commit in fake_reflog_parent to point to the commit in the
next reflog entry instead of the real parents.
However, the regular revision traversal tries not to show
the same commit twice, and so sets the SHOWN flag on each
commit it shows. In a reflog, however, we may want to see
the same commit more than once if it appears in the reflog
multiple times (which easily happens, for example, if you do
a reset to a prior state).
The fake_reflog_parent function takes care of this by
clearing flags, including SHOWN. Unfortunately, it does so
at the very end of the function, and it is possible to
return early from the function if there is no fake parent to
set up (e.g., because we are at the very first reflog entry
on the branch). In such a case the flag is not cleared, and
the entry is skipped by the revision traversal machinery as
already shown.
You can see this by walking the log of a ref which is set to
its very first commit more than once (the test below shows
such a situation). In this case the reflog walk will fail to
show the entry for the initial creation of the ref.
We don't want to simply move the flag-clearing to the top of
the function; we want to make sure flags set during the
fake-parent installation are also cleared. Instead, let's
hoist the flag-clearing out of the fake_reflog_parent
function entirely. It's not really about fake parents
anyway, and the only caller is the get_revision machinery.
Reported-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a non-interactive rebase of a ref fails at commit X and is aborted by
the user, the ref will be updated twice. First to point at X (with the
reflog message "rebase finished: $head_name onto $onto"), and then back
to $orig_head. It should not be updated at all.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running test t9010 without the SVN:: perl modules currently errors
out, for no good reason. We can make these tests easier to read and
run by not using the perl libsvn bindings and instead duplicating only
the relevant code from lib-git-svn.sh.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Pass output through the pager if format-patch is run with --stdout. This
saves the user the trouble of running git with '-p' or piping through a
pager.
setup_pager() already checks if stdout is a tty, so we don't have to
worry about behaviour if the user redirects/pipes stdout. Paging can
also be disabled with the config
[pager]
format-patch = false
Add tests to check for these behaviour.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* kb/maint-submodule-savearg:
submodule: only preserve flags across recursive status/update invocations
submodule: preserve all arguments exactly when recursing
* jm/mailmap:
t4203: do not let "git shortlog" DWIM based on tty
t4203 (mailmap): stop hardcoding commit ids and dates
mailmap: fix use of freed memory
* jk/push-progress:
push: pass --progress down to git-pack-objects
t5523-push-upstream: test progress messages
t5523-push-upstream: add function to ensure fresh upstream repo
test_terminal: ensure redirections work reliably
test_terminal: catch use without TTY prerequisite
test-lib: allow test code to check the list of declared prerequisites
tests: test terminal output to both stdout and stderr
tests: factor out terminal handling from t7006
* jn/gitweb-test:
gitweb/Makefile: Include gitweb/config.mak
gitweb/Makefile: Add 'test' and 'test-installed' targets
t/gitweb-lib.sh: Add support for GITWEB_TEST_INSTALLED
gitweb: Move call to evaluate_git_version after evaluate_gitweb_config
When comparing numbers such as "3" to "$(wc -l)", we should check for
numerical equality using -eq instead of string equality using = because
some implementations of wc output extra whitespace.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach 'git merge' the --abort option, which verifies the existence of
MERGE_HEAD and then invokes 'git reset --merge' to abort the current
in-progress merge and attempt to reconstruct the pre-merge state.
The reason for adding this option is to provide a user interface for
aborting an in-progress merge that is consistent with the interface
for aborting a rebase ('git rebase --abort'), aborting the application
of a patch series ('git am --abort'), and aborting an in-progress notes
merge ('git notes merge --abort').
The patch includes documentation and testcases that explain and verify
the various scenarios in which 'git merge --abort' can run. The
testcases also document the cases in which 'git merge --abort' is
unable to correctly restore the pre-merge state (look for the '###'
comments towards the bottom of t/t7609-merge-abort.sh).
This patch has been improved by the following contributions:
- Jonathan Nieder: Move test documentation into test_description
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Script may use 'git notes get-ref' to easily retrieve the current notes ref.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Notes trees may exist at different fanout levels internally. This
implementation detail should not be visible to the user, and it should
certainly not affect the merging of notes tree.
This patch adds testcases verifying the correctness of 'git notes merge'
when merging notes trees at different fanout levels.
This patch has been improved by the following contributions:
- Junio C Hamano: Portability: Don't string-compare 'wc -l' output
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new strategy is similar to "concatenate", but in addition to
concatenating the two note candidates, this strategy sorts the resulting
lines, and removes duplicate lines from the result. This is equivalent to
applying the "cat | sort | uniq" shell pipeline to the two note candidates.
This strategy is useful if the notes follow a line-based format where one
wants to avoid duplicate lines in the merge result.
Note that if either of the note candidates contain duplicate lines _prior_
to the merge, these will also be removed by this merge strategy.
The patch also contains tests and documentation for the new strategy.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When manually resolving a notes merge, if the merging ref has moved since
the merge started, we should fail to complete the merge, and alert the user
to what's going on.
This situation may arise if you start a 'git notes merge' which results in
conflicts, and you then update the current notes ref (using for example
'git notes add/copy/amend/edit/remove/prune', 'git update-ref', etc.),
before you get around to resolving the notes conflicts and calling
'git notes merge --commit'.
We detect this situation by comparing the first parent of the partial merge
commit (which was created when the merge started) to the current value of the
merging notes ref (pointed to by the .git/NOTES_MERGE_REF symref).
If we don't fail in this situation, the notes merge commit would overwrite
the updated notes ref, thus losing the changes that happened in the meantime.
The patch includes a testcase verifying that we fail correctly in this
situation.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This brings notes merge in line with regular merge's behaviour.
This patch has been improved by the following contributions:
- Ævar Arnfjörð Bjarmason: Don't use C99 comments.
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the notes merge conflicts in .git/NOTES_MERGE_WORKTREE have been
resolved, we need to record a new notes commit on the appropriate notes
ref with the resolved notes.
This patch implements 'git notes merge --commit' which the user should
run after resolving conflicts in the notes merge worktree. This command
finalizes the notes merge by recombining the partial notes tree from
part 1 with the now-resolved conflicts in the notes merge worktree in a
merge commit, and updating the appropriate ref to this merge commit.
In order to correctly finalize the merge, we need to keep track of three
things:
- The partial merge result from part 1, containing the auto-merged notes.
This is now stored into a ref called .git/NOTES_MERGE_PARTIAL.
- The unmerged notes. These are already stored in
.git/NOTES_MERGE_WORKTREE, thanks to part 1.
- The notes ref to be updated by the finalized merge result. This is now
stored in a symref called .git/NOTES_MERGE_REF.
In addition to "git notes merge --commit", which uses the above details
to create the finalized notes merge commit, this patch also implements
"git notes merge --reset", which aborts the ongoing notes merge by simply
removing the files/directory described above.
FTR, "git notes merge --commit" reuses "git notes merge --reset" to remove
the information described above (.git/NOTES_MERGE_*) after the notes merge
have been successfully finalized.
The patch also contains documentation and testcases for the two new options.
This patch has been improved by the following contributions:
- Ævar Arnfjörð Bjarmason: Fix nonsense sentence in --commit description
- Sverre Rabbelier: Rename --reset to --abort
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Thanks-to: Sverre Rabbelier <srabbelier@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Conflicts (that are to be resolved manually) are written into a special-
purpose working tree, located at .git/NOTES_MERGE_WORKTREE. Within this
directory, conflicting notes entries are stored (with conflict markers
produced by ll_merge()) using the SHA1 of the annotated object. The
.git/NOTES_MERGE_WORKTREE directory will only contain the _conflicting_
note entries. The non-conflicting note entries (aka. the partial merge
result) are stored in 'local_tree', and the SHA1 of the resulting commit
is written to 'result_sha1'. The return value from notes_merge() is -1.
The user is told to edit the files within the .git/NOTES_MERGE_WORKTREE
directory in order to resolve the conflicts.
The patch also contains documentation and testcases for the correct setup
of .git/NOTES_MERGE_WORKTREE.
The next part will recombine the partial notes merge result with the
resolved conflicts in .git/NOTES_MERGE_WORKTREE to produce the complete
merge result.
This patch has been improved by the following contributions:
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new -s/--strategy command-line option to 'git notes merge' allow the user
to choose how notes merge conflicts should be resolved. There are four valid
strategies to choose from:
1. "manual" (the default): This will let the user manually resolve conflicts.
This option currently fails with an error message. It will be implemented
properly in future patches.
2. "ours": This automatically chooses the local version of a conflict, and
discards the remote version.
3. "theirs": This automatically chooses the remote version of a conflict, and
discards the local version.
4. "union": This automatically resolves the conflict by appending the remote
version to the local version.
The strategies are implemented using the combine_notes_* functions from the
notes.h API.
The patch also includes testcases verifying the correct implementation of
these strategies.
This patch has been improved by the following contributions:
- Jonathan Nieder: Future-proof by always checking add_note() return value
- Stephen Boyd: Use test_commit
- Stephen Boyd: Use correct option name
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This continuation of the 'git notes merge' implementation teaches notes-merge
to properly do real merges between notes trees: Two diffs are performed, one
from $base to $remote, and another from $base to $local. The paths in each
diff are normalized to SHA1 object names. The two diffs are then consolidated
into a single list of change pairs to be evaluated. Each change pair consist
of:
- The annotated object's SHA1
- The $base SHA1 (i.e. the common ancestor notes for this object)
- The $local SHA1 (i.e. the current notes for this object)
- The $remote SHA1 (i.e. the to-be-merged notes for this object)
From the pair ($base -> $local, $base -> $remote), we can determine the merge
result using regular 3-way rules. If conflicts are encountered in this
process, we fail loudly and exit (conflict handling to be added in a future
patch), If we can complete the merge without conflicts, the resulting
notes tree is committed, and the current notes ref updated.
The patch includes added testcases verifying that we can successfully do real
conflict-less merges.
This patch has been improved by the following contributions:
- Jonathan Nieder: Future-proof by always checking add_note() return value
- Stephen Boyd: Use test_commit
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
- Junio C Hamano: fixup minor style issues
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This initial implementation of 'git notes merge' only handles the trivial
merge cases (i.e. where the merge is either a no-op, or a fast-forward).
The patch includes testcases for these trivial merge cases.
Future patches will extend the functionality of 'git notes merge'.
This patch has been improved by the following contributions:
- Stephen Boyd: Simplify argc logic
- Stephen Boyd: Use test_commit
- Ævar Arnfjörð Bjarmason: Don't use C99 comments.
- Jonathan Nieder: Add constants for common verbosity values
- Jonathan Nieder: Use trace_printf(...) instead of OUTPUT(o, 5, ...)
- Jonathan Nieder: Remove extraneous show() function
- Jonathan Nieder: Clarify handling of empty/missing notes ref in notes_merge()
- Junio C Hamano: fixup minor style issues
Thanks-to: Stephen Boyd <bebarino@gmail.com>
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Thanks-to: Jonathan Nieder <jrnieder@gmail.com>
Thanks-to: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using combine_notes_concatenate() to concatenate notes, it currently
ensures exactly one newline character between the given notes. However,
when using builtin/notes.c:create_note() to concatenate notes (e.g. by
'git notes append'), it adds a newline character to the trailing newline
of the preceding notes object, thus resulting in _two_ newlines (aka. a
blank line) separating contents of the two notes.
This patch brings combine_notes_concatenate() into consistency with
builtin/notes.c:create_note(), by ensuring exactly _two_ newline characters
between concatenated notes.
The patch also changes a few notes-related selftests accordingly.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rest of the file uses tabs for indenting. Fix the one function
that doesn't.
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the authentification initialisation to percent-decode username
and password for HTTP URLs.
Signed-off-by: Gabriel Corona <gabriel.corona@enst-bretagne.fr>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a test for HTTP authentication and proper percent-decoding of the
userinfo (username and password) part of the URL.
Signed-off-by: Gabriel Corona <gabriel.corona@enst-bretagne.fr>
Acked-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A user may want different pager settings or even a
different pager for various subcommands (e.g., because they
use different less settings for "log" vs "diff", or because
they have a pager that interprets only log output but not
other commands).
This patch extends the pager.<cmd> syntax to support not
only boolean to-page-or-not-to-page, but also to specify a
pager just for a specific command.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We explicitly document "0" and "1" as synonyms for "false"
and "true" in boolean config options. However, we don't
actually handle those values in git_config_maybe_bool.
In most cases this works fine, as we call git_config_bool,
which in turn calls git_config_bool_or_int, which in turn
calls git_config_maybe_bool. Values of 0/1 are considered
"not bool", but their integer values end up being converted
to the corresponding boolean values.
However, the log.decorate code looks for maybe_bool
explicitly, so that it can fall back to the "short" and
"full" strings. It does not handle 0/1 at all, and considers
them invalid values.
We cannot simply add 0/1 support to git_config_maybe_bool.
That would confuse git_config_bool_or_int, which may want to
distinguish the integer values "0" and "1" from bools.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An aborted merge prints the list of rejected paths as part of the
error message. Since commit f66caaf9 (do not overwrite files in
leading path), some of those paths do not have static buffers, so
we have to keep a copy. Use string_list's to accomplish this.
This changes the order of the list to the order in which the paths
are processed. Previously, it was reversed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In case HEAD does not point to a valid commit yet, merge is
implemented as a hard reset. This will cause untracked files to be
overwritten.
Instead, assume the empty tree for HEAD and do a regular merge. An
untracked file will cause the merge to abort and do nothing. If no
conflicting files are present, the merge will have the same effect
as a hard reset.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change submodule tests that piped to diff(1) to use test_cmp. The
resulting unified diff is easier to read.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split the "message in editor has initial comment" test into three
tests. The motivation is to be able to only skip the middle part under
NO_GETTEXT_POISON.
In addition the return value of 'git tag' was being returned. We now
check that it's non-zero. I used ! instead of test_must_fail so that
the GIT_EDITOR variable was only used in this command invocation, and
because the surrounding tests use this style.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new boolean "fetchRecurseSubmodules" config option controls the
behavior for "git fetch" and "git pull". It specifies if these commands
should recurse into submodules and fetch new commits there too and can be
set separately for each submodule.
In the .gitmodules file "submodule.<name>.fetchRecurseSubmodules" entries
are read before looking for them in .git/config. Thus settings found in
.git/config will override those from .gitmodules, thereby allowing the
user to ignore settings given by the remote side while also letting
upstream set reasonable defaults for those users who don't have special
needs.
This configuration can be overridden by the command line option
"--[no-]recurse-submodules" of "git fetch" and "git pull".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This new boolean option can be used to override the default for "git
fetch" and "git pull", which is to not recurse into populated submodules
and fetch all new commits there too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until now you had to call "git submodule update" (without -N|--no-fetch
option) or something like "git submodule foreach git fetch" to fetch
new commits in populated submodules from their remote.
This could lead to "(commits not present)" messages in the output of
"git diff --submodule" (which is used by "git gui" and "gitk") after
fetching or pulling new commits in the superproject and is an obstacle for
implementing recursive checkout of submodules. Also "git submodule
update" cannot fetch changes when disconnected, so it was very easy to
forget to fetch the submodule changes before disconnecting only to
discover later that they are needed.
This patch adds the "--recurse-submodules" option to recursively fetch
each populated submodule from the url configured in the .git/config of the
submodule at the end of each "git fetch" or during "git pull" in the
superproject. The submodule paths are taken from the index.
The hidden option "--submodule-prefix" is added to "git fetch" to be able
to print out the full paths of nested submodules.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an initial --in-reply-to is supplied, make it apply only to the
first message; --[no-]chain-reply-to setting are honored by second and
subsequent messages; this is also how the git-format-patch option with
the same name behaves.
Moreover, when $initial_reply_to is asked to the user interactively it
is asked as the "Message-ID to be used as In-Reply-To for the _first_
email", this makes the user think that the second and subsequent
patches are not using it but are considered as replies to the first
message or chained according to the --[no-]chain-reply setting.
Look at the v2 series in the illustration to see what the new behavior
ensures:
(before the patch) | (after the patch)
[PATCH 0/2] Here is what I did... | [PATCH 0/2] Here is what I did...
[PATCH 1/2] Clean up and tests | [PATCH 1/2] Clean up and tests
[PATCH 2/2] Implementation | [PATCH 2/2] Implementation
[PATCH v2 0/3] Here is a reroll | [PATCH v2 0/3] Here is a reroll
[PATCH v2 1/3] Clean up | [PATCH v2 1/3] Clean up
[PATCH v2 2/3] New tests | [PATCH v2 2/3] New tests
[PATCH v2 3/3] Implementation | [PATCH v2 3/3] Implementation
This is the typical behaviour we want when we send a series with cover
letter in reply to some discussion, the new patch series should appear
as a separate subtree in the discussion.
Also update the documentation on --in-reply-to to describe the new
behavior.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have always been creating rfc1991 signatures for users with "rfc1991"
in their gpg config but failed to recognize them (tag -l -n largenumber)
and verify them (tag -v, verify-tag).
Make good use of the refactored signature detection and let us recognize
and verify those signatures also.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, git expects "-----BEGIN PGP SIGNATURE-----" at the beginning of a
signature. But gpg uses "MESSAGE" instead of "SIGNATURE" when used with
the "rfc1991" option. This leads to git's failing to verify it's own
signed tags, among other problems.
Add tests for all code paths (tag -v, tag -l -n largenumber, tag -f
without -m) where signature detection matters.
Reported-by: Stephan Hugel <urschrei@gmail.com>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A stat-dirty index is not a detail that ought to concern the operator
of porcelain such as "git cherry-pick".
Without this change, a cherry-pick after copying a worktree with rsync
errors out with a misleading message.
$ git cherry-pick build/top
error: Your local changes to 'file.h' would be overwritten by merge. Aborting.
Please, commit your changes or stash them before you can merge.
Noticed-by: Pete Wyckoff <pw@padd.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some patches have a timezone formatted like '-08:00' instead of
'-0800' in their ---/+++ lines (e.g. http://lwn.net/Articles/131729/).
Take this into account when searching for the start of the timezone
(which is the end of the filename).
This does not actually affect the outcome of patching unless (1) a
file being patched has a non-' ' whitespace character (e.g., tab) in
its filename, or (2) the patch is whitespace-damaged, so the tab
between filename and timestamp has been replaced with spaces.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use test_might_fail instead of ignoring the exit status from git
config --unset, and let the exit status propagate past rm -f (which
does not fail on ENOENT). Otherwise bugs that lead git config to
crash would not be detected when this test runs.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The same code to check the position of HEAD is used by several
tests in this script. Factor it out as a function and simplify it.
Noticed using an &&-chaining tester, because the current code
does not propagate the precise exit status from errors.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a comment describing the setup in t3404 to its --help output.
This should make it easier to decide where to put new functions
without disrupting the flow of the file or obstructing the description
of the test setup.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Allow test_commit failures in loop iterations before the last one to
cause the test assertion to fail.
More importantly, avoiding these loops makes the test a little
simpler to read and decreases the vertical screen footprint of
the setup test assertion by one line.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the test_expect_code helper instead of open-coding it.
The main behavior change is to print the command and actual exit
status when the test fails. More importantly, this would make it
easier to add commands before "git notes show" as part of the
same test assertion if needed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As t/README explains:
When a gitcommand dies due to a segfault, test_must_fail
diagnoses it as an error; "! git <command>" treats it as
just another expected failure, which would let such a bug
go unnoticed.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
rev-parse --parseopt exits with code 129 (usage error) when asked
to dump usage with -h on behalf of another command. Scripts can
take advantage of this to avoid trying to parse usage information
as though it were the regular output from some git command.
Noticed with an &&-chaining tester.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using 'return' in an attempt to end a test assertion can have
unpredictable results (probably escaping from test_run_ and breaking
its bookkeeping). Redo the control flow using helpers like
test_expect_code and git diff --exit-code, so each test assertion can
follow the usual form
command that should succeed &&
command that should succeed &&
command that should succeed &&
...
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some tests check their output with code like the following:
test "$(git ls-files -u B | wc -l)" -eq 3 || {
echo "BAD: should have left stages for B"
return 1
}
The verbose failure condition is used because test, unlike
diff, does not print any useful information about the
nature of the failure when it fails.
Introduce a test_line_count function to help. If used like
git ls-files -u B >output &&
test_line_count -eq 3 output
it will produce output like
test_line_count: line count for output !-eq 3
100644 b023018cabc396e7692c70bbf5784a93d3f738ab 2 hi.c
100644 45b983be36b73c0788dc9cbcb76cbb80fc7bb057 3 hi.c
on failure.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Same rules as before: this patch only adds " &&" to the end of
some lines in the test suite.
Intended to be applied on top of or squashed with the last
batch if they look okay.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Breaks in a test assertion's && chain can potentially hide
failures from earlier commands in the chain.
Commands intended to fail should be marked with !, test_must_fail, or
test_might_fail. The examples in this patch do not require that.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Support lines of the form "fixup! 7a235b" that specify an exact commit
in addition to the normal "squash! Old commit message" form.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current behvaior of --autosquash can duplicate fixup!/squash! lines
if they match multiple commits, and it can also apply them to commits
that come after them in the todo list. Even more oddly, a commit that
looks like "fixup! fixup!" will match itself and be duplicated in the
todo list.
Change the todo list rearranging to mark all commits as used as soon
as they are emitted, and to avoid emitting a fixup/squash commit if the
commit has already been marked as used.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit c84de70 (excluded_1(): support exclude files in index -
2009-08-20) tries to work around the fact that there is no
directory/file information in index entries, therefore
EXC_FLAG_MUSTBEDIR match would fail.
Unfortunately the workaround is flawed. This fixes it.
Reported-by: Thomas Rinderknecht <thomasr@sailguy.org>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
1. When --in-reply-to gives $reply_to, the first one becomes a reply to
that message, with or without --chain-reply-to.
2. When --chain-reply-to is in effect, all the messages are strung
together to form a single chain. The first message may be in reply to
the $reply_to given by --in-reply-to command line option (see
previous), or the root of the discussion thread. The second one is a
response to the first one, and the third one is a response to the
second one, etc.
3. When --chain-reply-to is not in effect:
a. When --in-reply-to is used, too, the second and the subsequent ones
become replies to $reply_to. Together with the first rule, all
messages become replies to $reply_to given by --in-reply-to.
b. When --in-reply-to is not used, presumably the second and
subsequent ones become replies to the first one, which would be the
root.
The documentation is reasonably clear about the 1., 2. and 3a. above, I
think, even though I do not think 3b. is clearly specified.
The two tests added by this patch at least documents what happens between
these two options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7500: test expected behavior of commit --squash
t3415: test interaction of commit --squash with rebase --autosquash
t3900: test commit --squash with i18n encodings
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
t7500: test expected behavior of commit --fixup
t3415: test interaction of commit --fixup with rebase --autosquash
t3900: test commit --fixup with i18n encodings
Signed-off-by: Pat Notz <patnotz@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recursive invocations of submodule update/status preserve all arguments,
so executing
git submodule update --recursive -- foo
attempts to recursively update a submodule named "foo".
Naturally, this fails as one cannot have an infinitely-deep stack of
submodules each containing a submodule named "foo". The desired behavior
is instead to update foo and then recursively update all submodules
inside of foo.
This commit accomplishes that by only saving the flags for use in the
recursive invocation.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Shell variables only hold strings, not lists of parameters,
so $orig_args after
orig_args="$@"
fails to remember where each parameter starts and ends, if
some include whitespace. So
git submodule update \
--reference='/var/lib/common objects.git' \
--recursive --init
becomes
git submodule update --reference=/var/lib/common \
objects.git --recursive --init
in the inner repositories. Use "git rev-parse --sq-quote" to
save parameters in quoted form ready for evaluation by the
shell, avoiding this problem.
Helped-By: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
(Just like we did for documentation already)
In the process, we change "non-remote branch" to "branch outside the
refs/remotes/ hierarchy" to avoid the ugly "non-remote-tracking branch".
The new formulation actually corresponds to how the code detects this
case (i.e. prefixcmp(refname, "refs/remotes")).
Also, we use 'remote-tracking branch' in generated merge messages (by
merge an fmt-merge-msg).
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To complement the straightforward perl application in previous patch,
this adds a few manual changes.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"remote-tracking" branch makes it explicit that the branch is "tracking a
remote", as opposed to "remote, and tracking something".
See discussion in e.g.
http://mid.gmane.org/8835ADF9-45E5-4A26-9F7F-A72ECC065BB2@gmail.com
for more details.
This patch is a straightforward application of
perl -pi -e 's/remote tracking branch/remote-tracking branch/'
except in the RelNotes directory.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Older Gits talked about "updating" a file to add its content to the
index, but this terminology is confusing for new users. "to stage" is far
more intuitive and already used in e.g. the "git stage" command name.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Usually when applying a binary diff generated without
--binary, it will be rejected early, as we don't even have
the full sha1 of the pre- and post-images.
However, if the diff is generated with --full-index (but not
--binary), then we will actually try to apply it. If we have
the postimage blob, then we can take a shortcut and never
even look at the binary diff at all (e.g., this can happen
when rebasing changes within a repository).
If we don't have the postimage blob, though, we try to look
at the actual fragments, of which there are none, and get a
segfault. This patch checks explicitly for that case and
complains to the user instead of segfaulting. We need to
keep the check at a low level so that the "shortcut" case
above continues to work.
We also add a test that demonstrates the segfault. While
we're at it, let's also explicitly test the shortcut case.
Reported-by: Rafaël Carré <rafael.carre@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
6df42ab (Add global and system-wide gitattributes, 2010-09-01) forgot
to quote one instance of $HOME in the tests. This would be valid
according to POSIX, but bash 4 helpfully declines to execute the
command in question with an "ambiguous redirection" error.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ab/send-email-perl:
send-email: extract_valid_address use qr// regexes
send-email: is_rfc2047_quoted use qr// regexes
send-email: use Perl idioms in while loop
send-email: make_message_id use "require" instead of "use"
send-email: send_message die on $!, not $?
send-email: use (?:) instead of () if no match variables are needed
send-email: sanitize_address use qq["foo"], not "\"foo\""
send-email: sanitize_address use $foo, not "$foo"
send-email: use \E***\Q instead of \*\*\*
send-email: cleanup_compose_files doesn't need a prototype
send-email: unique_email_list doesn't need a prototype
send-email: file_declares_8bit_cte doesn't need a prototype
send-email: get_patch_subject doesn't need a prototype
send-email: use lexical filehandles during sending
send-email: use lexical filehandles for $compose
send-email: use lexical filehandle for opendir
Conflicts:
git-send-email.perl
* sb/send-email-use-to-from-input:
send-email: Don't leak To: headers between patches
send-email: Use To: headers in patch files
Conflicts:
git-send-email.perl
You can run "make DEFAULT_TEST_TARGET=prove test" to run the test under
"prove" (or $(PROVE) if set). The output is a bit easier to read when
running many tests in parallel.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Liked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Liked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When trying to fix up a corrupt repository, one might prefer that
"update-index -h" print an accurate usage message and exit rather
than reading the repository and complaining about the corruption.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign to make sure "git <command> -h" works correctly
when run from distractingly bad repositories.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Part of a campaign to avoid git <command> -h being distracted by
access to the repository. A caller hoping to use "git ls-files"
with an alternate index as part of a repair operation may well use
"git ls-files -h" to show usage while planning it out.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Given a request for command-line usage information rather than some
more substantial action, the only friendly thing to do is to report
the usage information as soon as possible and exit.
Without this change, as "git gc" glances over the repository, it can
be distracted by the desire to report a malformed configuration file.
Noticed while working through reports from Duy's repository access
checker.
[jn: with rewritten log message and tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status" and "git commit" read .git/config and .gitmodules before
parsing options, but there is no reason to access a repository at all
when the caller just wanted to know what arguments are accepted.
[jn: rewrote the log message and added test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
checkout-index loads the index before parsing options. Erroring out
is counterproductive at that point if the operator is hunting for a
command to recover useful data from the broken repository.
[jn: new commit message, tests]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There is no need for "git branch -h" to try to access a repository.
In the spirit of v1.6.6-rc0~34^2~3 (Let 'git <command> -h' show usage
without a git dir, 2009-11-09). This brings git one step closer to
passing the following (automatically verifiable) test:
Before any repository access (aside from git_config()), a
function from the setup_git_directory_* family has been run
and thus one step closer to being able to use an automatic repository
access checker.
[jn: simplified; new commit message, test]
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_config() function signals error by returning -1 in
two instances:
1. An actual error occurs in opening a config file (parse
errors cause an immediate die).
2. Of the three possible config files, none was found.
However, this second case is often not an error at all; it
simply means that the user has no configuration (they are
outside a repo, and they have no ~/.gitconfig file). This
can lead to confusing errors, such as when the bash
completion calls "git config --list" outside of a repo. If
the user has a ~/.gitconfig, the command completes
succesfully; if they do not, it complains to stderr.
This patch allows callers of git_config to distinguish
between the two cases. Error is signaled by -1, and
otherwise the return value is the number of files parsed.
This means that the traditional "git_config(...) < 0" check
for error should work, but callers who want to know whether
we parsed any files or not can still do so.
[jc: with tests from Jonathan]
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a line contains nothing but whitespace with at least one tab
and the core.whitespace config option contains blank-at-eol, the
whitespace on the line is being printed twice, once unhighlighted
(unless otherwise matched by one of the other core.whitespace values),
and a second time highlighted for blank-at-eol.
Update the leading indentation check to stop checking when it reaches
the trailing whitespace.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Enhance the test_decode_color function to handle all common color codes,
including background colors and escapes that contain multiple codes.
This change necessitates changing <WHITE> to <BOLD>, so update t4034
as well.
This change is necessary for the next commit in order to test
background colors properly.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Encode.pm started updating the string to decode in-place when a second
argument is passed in version 2.40.
This causes 'decode_utf8("", Encode::FB_CROAK)' to die with a message
like:
Modification of a read-only value attempted at .../Encode.pm line 216.
Work around this by passing an empty variable instead of a constant
string.
Signed-off-by: Brian Gernhardt <brian@gernhardtsoftware.com>
Acked-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "shortlog" command defaults to HEAD only when its standard input is
connected to a terminal; otherwise it acts in the traditional "filter"
mode to read and summarize the "git log" output.
Two new tests added to t4203 assumed that the command always default to
HEAD, but when the standard input is closed (or connected to /dev/null),
it output empty, which is a summary of its empty input, causing the test
to break.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Another test for the replace root feature. One can imagine an
implementation for which R "some/subdir" "" would free some state
associated to the subdir and leave fast-import confused.
Luckily, git's is not such an implementation.
While at it, change the previous test to use C "some/subdir" ""
instead of R (i.e., test both syntaxes).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
t/t9001-send-email.sh: fix stderr redirection in 'Invalid In-Reply-To'
Clarify and extend the "git diff" format documentation
git-show-ref.txt: clarify the pattern matching
documentation: git-config minor cleanups
Update test script annotate-tests.sh to handle missing/extra authors
The current script used by annotate-tests.sh (used by t8001 and t8002) fails
to emit a warning if any of the expected authors never show up in the output
or if authors that show up in the output were never specified as expected.
Update the script to fail in both of these scenarios.
Helped-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a new option -e (or --show-email) to git-blame that will display
the author's email instead of name on each line. This option works
for both git-blame and git-annotate.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When tree_content_set() is asked to modify the path "foo/bar/",
it first recurses like so:
tree_content_set(root, "foo/bar/", sha1, S_IFDIR) ->
tree_content_set(root:foo, "bar/", ...) ->
tree_content_set(root:foo/bar, "", ...)
And as a side-effect of 2794ad5 (fast-import: Allow filemodify to set
the root, 2010-10-10), this last call is accepted and changes
the tree entry for root:foo/bar to refer to the specified tree.
That seems safe enough but let's reject the new syntax (we never meant
to support it) and make it harder for frontends to introduce pointless
incompatibilities with git fast-import 1.7.3.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Until M 040000 <tree> "" syntax was introduced in commit 2794ad5
(fast-import: Allow filemodify to set the root, 2010-10-10), it
was impossible for the root entry to refer to an unloaded tree.
Update various functions to take that possibility into account.
Otherwise
M 040000 <tree> ""
M 100644 :1 "foo"
and similar commands (using D, C, or R after resetting the root
tree) segfault.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing via builtin transports (like file://, git://), the
underlying transport helper (in this case, git-pack-objects) did not get
the --progress option, even if it was passed to git push.
Fix this, and update the tests to reflect this.
Note that according to the git-pack-objects documentation, we can safely
apply the usual --progress semantics for the transport commands like
clone and fetch (and for pushing over other smart transports).
Reported-by: Chase Brammer <cbrammer@gmail.com>
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reported-by: Chase Brammer <cbrammer@gmail.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For terminal tests that capture output/stderr, the TTY prerequisite
warning does not quite work for commands like
test_terminal foo >out 2>err
because the warning gets "swallowed" up by the redirection that's
supposed only to be done by the subcommand.
Even worse, the outcome depends on whether stdout was already a
terminal (in which case test_terminal is a noop) or not (in which case
test_terminal introduces a pseudo-tty in the middle of the pipeline).
$ test_terminal.perl sh -c 'test -t 1 && echo >&2 YES' >out
YES
$ sh -c 'test -t 1 && echo >&2 YES' >out
$
So:
- use the test_terminal script even when running with "-v".
- skip tests that require a terminal when the test_terminal
script is unusable because IO::Pty is not installed.
- write the "need to declare TTY prerequisite" message to fd 4,
where it will be printed when running tests with -v, rather
than being swallowed up by an unrelated redireciton.
Noticed-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is easy to forget to declare the TTY prerequisite when
writing tests on a system where it would always be satisfied
(because IO::Pty is installed; see v1.7.3-rc0~33^2, 2010-08-16
for example). Automatically detect this problem so there is
no need to remember.
test_terminal: need to declare TTY prerequisite
test_must_fail: command not found: test_terminal echo hi
test_terminal returns status 127 in this case to simulate
not being available.
Also replace the SIMPLEPAGERTTY prerequisite on one test with
"SIMPLEPAGER,TTY", since (1) the latter is supported now and
(2) the prerequisite detection relies on the TTY prereq being
explicitly declared.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is plumbing to prepare helpers like test_terminal to notice buggy
test scripts that do not declare all of the necessary prerequisites.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some outputs (like the pager) care whether stdout is a
terminal. Others (like progress meters) care about stderr.
This patch sets up both. Technically speaking, we could go
further and set up just one (because either the other goes
to a terminal, or because our tests are only interested in
one). This patch does both to keep the interface to
lib-terminal simple.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Other tests besides the pager ones may want to check how we handle
output to a terminal. This patch makes the code reusable.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since b541248 (merge.conflictstyle: choose between "merge" and "diff3
-m" styles, 2008-08-29), git-merge-file uses setup_directory_gently(),
thus cd'ing around to find any possible config files to use.
This broke merge-file when it is called from within a subdirectory of
a repository, and the arguments are all relative paths.
Fix by prepending the prefix, as passed down from the main git
setup code, if there is any.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A seemingly innocuous change like adding test_tick somewhere can
completely upset the final mailmap test, since it checks commit
hashes and dates. Make the test less fragile by fuzzing away the
unpredictable parts and leaving in the authors (which is what the
test is about, anyway).
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The whitespace check printed the value of the wrong variable, i.e. the
beginning of the block of blank lines at the EOF (possibly absent) in the
old file.
As "git diff --check" is used by users to check their changes before
making a commit, we should point at the line number in the file after
the change.
Signed-off-by: Christoph Mallon <christoph.mallon@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Better advice on using topic branches for kernel development
Documentation: update implicit "--no-index" behavior in "git diff"
Documentation: expand 'git diff' SEE ALSO section
Documentation: diff can compare blobs
Documentation: gitrevisions is in section 7
shell portability: no "export VAR=VAL"
CodingGuidelines: reword parameter expansion section
Documentation: update-index: -z applies also to --index-info
Documentation: No argument of ALLOC_GROW should have side-effects
On an x86_64 system (F13-based), I ran these commands in an empty directory:
git init
printf '%s\n' \
'<jdoe@example.com> <jdoe@example.COM>' \
'John <jdoe@example.com>' > .mailmap
git shortlog < /dev/null
Here's the result:
(reading log message from standard input)
*** glibc detected *** git: free(): invalid pointer: 0x0000000000f53730 ***
======= Backtrace: =========
/lib64/libc.so.6[0x31ba875676]
git[0x48c2a5]
git[0x4b9858]
...
zsh: abort (core dumped) git shortlog
What happened?
Some .mailmap entry is of the <email1> <email2> form,
while a subsequent one looks like "User Name <Email2>,
and the two email addresses on the right are not identical
but are "equal" when using a case-insensitive comparator.
Then, when add_mapping is processing the latter line, new_email is NULL
and we free me->email, yet do not replace it with a new strdup'd string.
Thus, when later we attempt to use the buffer behind that ->email pointer,
we reference freed memory.
The solution is to free ->email and ->name only if we're about to replace them.
[jc: squashed in the tests from Jonathan]
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code paths for showing commits in "git log" and "git
rev-list --graph" correctly handle embedded NULs by looking
only at the resulting strbuf's length, and never treating it
as a C string. The code path for regular rev-list, however,
used printf("%s"), which resulted in truncated output. This
patch uses fwrite instead, like the --graph code path.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a submodule directory has not been filled by "git submodule update"
yet, then "git submodule sync" must still update the super-project's
configuration for submodule.<name>.url.
This situation occurs when switching between branches with a module from
different urls and other branches without the submodule.
Signed-off-by: Andreas Köhler <andi5.py@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some patches have a timezone formatted like ‘-08:00’ instead of
‘-0800’ (e.g. http://lwn.net/Articles/131729/), so git apply would
fail to recognize the epoch timestamp of deleted files and would
create empty files instead. Teach it to support both formats, and add
a test case.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
v1.7.3-rc0~75^2 (Teach fast-import to import subtrees named by tree id,
2010-06-30) has a shortcoming - it doesn't allow the root to be set.
Extend this behaviour by allowing the root to be referenced as the
empty path, "".
For a command (like filter-branch --subdirectory-filter) that wants
to commit a lot of trees that already exist in the object db, writing
undeltified objects as loose files only to repack them later can
involve a significant amount of overhead.
(23% slow-down observed on Linux 2.6.35, worse on Mac OS X 10.6)
Fortunately we have fast-import (which is one of the only git commands
that will write to a pack directly) but there is not an advertised way
to tell fast-import to commit a given tree without unpacking it.
This patch changes that, by allowing
M 040000 <tree id> ""
as a filemodify line in a commit to reset to a particular tree without
any need to parse it. For example,
M 040000 4b825dc642 ""
is a synonym for the deleteall command and the fast-import equivalent of
git read-tree 4b825dc642
Signed-off-by: David Barr <david.barr@cordelta.com>
Commit-message-by: Jonathan Nieder <jrnieder@gmail.com>
Acked-by: Sverre Rabbelier <srabbelier@gmail.com>
Tested-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the work tree contains an untracked file x, and
unpack-trees wants to checkout a path x/*, the
file x is removed unconditionally.
Instead, apply the same checks that are normally
used for untracked files, and abort if the file
cannot be removed.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Use the test_commit and test_path_is_missing
functions from the test library.
Also make sure that a merge which fails due to
pre-merge checks aborts properly and does not
leave MERGE_HEAD behind.
The "will not overwrite removed file" test is an
exception to this. It notices the untracked file
at a stage where the merge is already well under
way. Therefore we cannot abort the merge without
major restructuring. See the following thread for
more details.
http://mid.gmane.org/7vskopwxej.fsf@gitster.siamese.dyndns.org
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
The commit 7ce896b (Enable highlight executable path as a
configuration option, 2010-09-21) forgot to update t9500 test.
While at it, describe highlight test better.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also remove a call to 'git config --unset difftool.prompt', since that is
already unset by restore_test_defaults.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also prefix several relevant git merge commands with 'test_must_fail' to
keep the tests passing.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also move repeated tag and branch deletions into a separate setup test, to
avoid failures from tags and branches having already been deleted.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add a couple test_must_fail invocations where needed, and avoid
one-shot environment variable export and function calls.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ever since 8b12413 (color: allow multiple attributes 2010-02-27),
diff.color.new has been unused in t4026, so also remove the final unsetting
of that value to make the third to last test pass with appropriate
'&&' chaining.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add test_might_fail in front of the git_config --unset commands that
may be trying to unset a value that never got set (due to a previous
failing test) or that were already unset.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also replace '|| return 1' by '&&' to allow chain of operations to be
checked for proper return status, and modify the update-index command
as suggested by Jonathan Nieder to not exit early but try to make sure
files that match the work tree are marked as matching.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, replace "|| return 1" with "&&" in order to keep commands chained.
Acked-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This commit takes advantage of Ævar Arnfjörð Bjarmason's recent change
to test_expect_code (test-lib: make test_expect_code a test command) to
simplify several testcases.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change test_expect_code to be a normal test command instead of a
top-level command.
As a top-level command it would fail in cases like:
test_expect_code 1 'phoney' '
foo && bar && (exit 1)
'
Here the test might incorrectly succeed if "foo" or "bar" happened to
fail with exit status 1. Instead we now do:
test_expect_success 'phoney' '
foo && bar && test_expect_code 1 "(exit 1)"
'
Which will only succeed if "foo" and "bar" return status 0, and "(exit
1)" returns status 1. Note that test_expect_code has been made slightly
noisier, as it reports the exit code it receives even upon success.
Some test code in t0000-basic.sh relied on the old semantics of
test_expect_code to test the test_when_finished command. I've
converted that code to use an external test similar to the TODO test I
added in v1.7.3-rc0~2^2~3.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Documentation/git-clone: describe --mirror more verbosely
do not depend on signed integer overflow
work around buggy S_ISxxx(m) implementations
xdiff: cast arguments for ctype functions to unsigned char
init: plug tiny one-time memory leak
diffcore-pickaxe.c: remove unnecessary curly braces
t3020 (ls-files-error-unmatch): remove stray '1' from end of file
setup: make sure git dir path is in a permanent buffer
environment.c: remove unused variable
git-svn: fix processing of decorated commit hashes
git-svn: check_cherry_pick should exclude commits already in our history
Documentation/git-svn: discourage "noMetadata"
If the first patch in a series has a To: header in the file and the
second patch in the series doesn't the address from the first patch will
be part of the To: addresses in the second patch. Fix this by treating the
to list like the cc list. Have an initial to list come from the command
line, user input and config options. Then build up a to list from each
patch and concatenate the two together before sending the patch. Finally,
reset the list after sending each patch so the To: headers from a patch
don't get used for the next one.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Upon program invocation, MSYS converts environment variables containing
path-like values from Unix-style to DOS-style under the assumption that
the program being invoked understands only DOS-style pathnames. For
instance, the Unix-style path /msysgit is translated to c:/msysgit. For
test t5560, the path being requested from git-http-backend is specified
via environment variable PATH_INFO as a URL path of the form
/repo.git/foobar, which git-http-backend combines with GIT_PROJECT_ROOT
to determine the actual physical path within the repository. This is a
case where MSYS's conversion of the path-like value of PATH_INFO causes
harm, for two reasons. First, the resulting converted path, when joined
with GIT_PROJECT_ROOT is bogus (for instance,
"C:/msysgit/git/t/trash-zzz/C:/msysgit/repo.git/HEAD"). Second, the
converted PATH_INFO path is rejected by git-http-backend as an 'alias'
due to validation failure on the part of daemon_avoid_alias().
Unfortunately, the standard work-around of doubling the leading slash
(i.e. //repo.git/foobar) to suppress MSYS path conversion works only for
command-line arguments, but not for environment variables.
Consequently, side step the problem by instead passing git-http-backend
an already-constructed full path rather than components GIT_PROJECT_ROOT
and PATH_INFO.
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
By default, MSYS sed throws away CR from CRLF line-endings. Tests
t6038.5 and t6038.6 employ sed to normalize conflict output of git-merge
for validation purposes. These tests expect CRLF line-endings to be
present in the normalized output of git-merge, and thus fail when sed
undesirably removes CR. Fix by employing sed's -b/--binary switch to
suppress its default behavior of dropping CR characters.
Acked-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
By default, MSYS grep reads in text-mode and converts CRLF into LF line
endings. For testing HTTP use binary mode (-U) as checking is done for
CR in HTTP headers
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
These two tests fail on msysGit because /dev/null is an alias for nul on
Windows and when reading the value back from git config the alias does
not match the real filename. Also the HOME environment variable has a
unix-style path but git returns a native equivalent path for '~'. As
these are platform-dependent equivalent results it seems simplest to
skip the test entirely.
Moves the NOT_MINGW prereq from t5503 into the test library.
Signed-off-by: Pat Thoyts <patthoyts@users.sourceforge.net>
* maint:
Fix typo in pack-objects' usage
Make sure that git_getpass() never returns NULL
t0004 (unwritable files): simplify error handling
rev-list-options: clarify --parents and --children
Change `while(<$fh>) { my $c = $_' to `while(my $c = <$fh>) {', and
use `chomp $c' instead of `$c =~ s/\n$//g;', the two are equivalent in
this case.
I've also changed the --cccmd test so that we test for the stripping
of whitespace at the beginning of the lines returned from the
--cccmd. I think we probably shouldn't do this, but it was there
already so I haven't changed the behavior.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.comReviewed-by: Avery Pennarun <apenwarr@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'test-installed' target in gitweb/Makefile tests installed gitweb,
using the same destination directory that 'install' target uses.
The 'test' target is just a convenience wrapper invoking 'gitweb-test'
target of t/Makefile.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
You can set the GITWEB_TEST_INSTALLED environment variable to the
gitwebdir (the directory where gitweb is installed / deployed to) of
an existing gitweb instalation, or to the pathname of installed gitweb
script, to test that installation.
This change is intended to make it possible to test that process of
installing gitweb and the modules it depends on works correctly (after
splitting gitweb).
If GITWEB_TEST_INSTALLED is used, print what script are we testing
to make it easy to spot that we test installed gitweb.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of
... normal test script ...
status=$?
... cleanup ...
(exit $status)
set up cleanup commands with test_when_finished. This makes the
test script a little shorter, and more importantly, it ensures errors
during cleanup are reported.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When there are unmerged entries present, make sure to check for D/F
conflicts first and remove any files present in HEAD that would be in the
way of creating files below the correspondingly named directory. Such
files will be processed again at the end of the merge in
process_df_entry(); at that time we will be able to tell if we need to
and can reinstate the file, whether we need to place its contents in a
different file due to the directory still being present, etc.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If all the paths below some directory involved in a D/F conflict were not
removed during the rest of the merge, then the contents of the file whose
path conflicted needs to be recorded in file with an alternative filename.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If all the paths below some directory involved in a D/F conflict were not
removed during the rest of the merge, then the contents of the file whose
path conflicted needs to be recorded in file with an alternative filename.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is called from process_df_entry(), near the end of the merge.
Rather than just checking whether one of the sides of the merge had a
directory at the same path as one of our files, check whether that
directory is still present by this point of our merge.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If all the paths below some directory involved in a D/F conflict were not
removed during the rest of the merge, then the contents of the file whose
path conflicted needs to be recorded in file with an alternative filename.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the handling of content merging for renames from process_renames() to
process_df_entry().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the handling of rename/rename conflicts where one file is renamed to
two different files, from process_renames() to process_df_entry().
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a commit moves A to B while another commit created B (or moved C to
B), and these two different commits serve as different merge-bases for a
later merge, c94736a (merge-recursive: don't segfault while handling
rename clashes 2009-07-30) added some special code to avoid segfaults.
Since that commit, the two versions of B are merged in place (which could
be potentially conflicting) and the intermediate result is used as the
virtual ancestor.
However, right before this special merge, try_merge was turned on, meaning
that process_renames() would try an alternative merge that ignores the
'add' part of the conflict, and, if the merge is clean, store that as the
new virtual ancestor. This could cause incorrect merging of criss-cross
merges; it would typically result in just recording a slightly confusing
merge base, but in some cases it could cause silent acceptance of one side
of a merge as the final resolution when a conflict should have been
flagged.
When we do a special merge for such a rename/add conflict between
merge-bases, turn try_merge off to avoid an inappropriate second merge.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If merging two lines of development involves a rename/add conflict, and two
different people make such a merge but resolve it differently, and then
someone tries to merge the resulting two merges, then they should clearly
get a conflict due to the different resolutions from the previous
developers. However, in some such cases the conflict would not be detected
and git would silently accept one of the two versions being merged as the
final merge resolution.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c94736a (merge-recursive: don't segfault while handling rename clashes
2009-07-30) added t6036 with a testcase that involved dual renames and a
criss-cross merge. Add a test that is nearly identical, but which also
involves content modification -- a case git currently does not merge
correctly.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
c94736a (merge-recursive: don't segfault while handling rename clashes
2009-07-30) added this testcase with an interesting corner case test,
which previously had cased git to segfault. This test ensures that the
segfault does not return and that the merge correctly fails; just add
some checks that verify the state of the index and worktree after the merge
are correct.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add tests where one file is renamed to two different paths in different
sides of history, and where each of the new files matches the name of a
directory from the opposite side of history. Include tests for both the
case where the merge results in those directories not being cleanly
removed, and where those directories are cleanly removed during the merge.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An interesting testcase is having two files each in their own subdirectory
getting renamed to the toplevel at the directory pathname of the other.
Questions arise as to whether the order of operations matters and whether
the directories can correctly get out of the way and make room for the
new files.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Having the source of a rename be involved in a directory/file conflict does
not currently pose any difficulties to the current merge-recursive
algorithm (in contrast to destinations of renames and D/F conflicts).
However, combining the two seemed like good testcases to include for
completeness.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When merging two branches with some path involved in a D/F conflict, the
choice of which branch to merge into the other matters for (at least) two
reasons: (1) whether the working copy has a directory full of files that
is in the way of a file, or a file exists that is in the way of a
directory of files, (2) when the directory full of files does not disappear
due to the merge, what files at the same paths should be renamed to
(e.g. filename~HEAD vs. filename~otherbranch).
Add some tests that reverse the merge order of two other tests, and which
verify the contents are as expected (namely, that the results are identical
other than modified-for-uniqueness filenames involving branch names).
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add testing of the various ways that a renamed file to a path involved in
a directory/file conflict may be involved in. This includes whether or not
there are conflicts of the contents of the renamed file (if the file was
modified on both sides of history), and whether the directory from the
other side of the merge will disappear as a result of the merge or not.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previous D/F fixes I submitted (5a2580d and ae74548) had caused merge to
become excessively spammy, which was fixed in 96ecac6 (merge-recursive:
Avoid excessive output for and reprocessing of renames 2010-08-20). Add a
new test to avoid repeating that mistake with my several upcoming changes.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
d5af510 (RE: [PATCH] Avoid rename/add conflict when contents are identical
2010-09-01) avoided erroring out in a rename/add conflict when the contents
were identical. A simpler fix could have handled that particular testcase,
but it would not correctly handle the case where a symlink is involved.
Add another testcase using symlinks, to avoid breaking that case.
Signed-off-by: Ken Schalk <ken.schalk@intel.com>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We need to get the correct mode when blame reads the source from the
working tree, the index, or trees. This allows us to omit running
textconv filters on symbolic links.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git blame --textconv is wrongly calling the textconv filter on
symlinks: symlinks are stored as blobs whose content is the target of
the link, and blame calls the textconv filter on a temporary file
filled-in with the content of this blob.
For example:
$ git blame -C -C regular-file.pdf
Error: May not be a PDF file (continuing anyway)
Error: PDF file is damaged - attempting to reconstruct xref table...
Error: Couldn't find trailer dictionary
Error: Couldn't read xref table
Warning: program returned non-zero exit code #1
fatal: unable to read files to diff
That errors come from pdftotext run on symlink.pdf being extracted to
/tmp/ with one-line plain-text content pointing to link destination.
So several failures are demonstrated here:
- git cat-file --textconv :symlink.bin # also HEAD:symlink.bin
- git blame --textconv symlink.bin
- git blame -C -C --textconv regular-file # but also looks on symlink.bin
At present they all fail with something like.
E: /tmp/j3ELEs_symlink.bin is not "binary" file
NOTE: git diff doesn't try to textconv the pathnames, it runs the
textual diff without textconv, which is the expected behavior.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The textconv filter is sometimes incorrectly ran on a temporary file
whose content is the target of a symbolic link, instead of actual file
content. Prepare to test this by marking the content of the file to
convert with "bin:", and let the helper die if "bin:" is not found in
the file content.
NOTE: I've changed $@ to $1 in helper becase textconv program "should
take a single argument" (see Documentation/gitattributes.txt), so
making this more explicit makes sense and also helps to avoid
problems with feeding arguments to echo.
Signed-off-by: Kirill Smelkov <kirr@landau.phys.spbu.ru>
Reviewed-by: Matthieu Moy <Matthieu.Moy@grenoble-inp.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/grep-header-all-match-fix:
log --author: take union of multiple "author" requests
grep: move logic to compile header pattern into a separate helper
* jc/pickaxe-grep:
diff/log -G<pattern>: tests
git log/diff: add -G<regexp> that greps in the patch text
diff: pass the entire diff-options to diffcore_pickaxe()
gitdiffcore doc: update pickaxe description
* rr/fmt-merge-msg:
t6200-fmt-merge-msg: Exercise '--log' to configure shortlog length
t6200-fmt-merge-msg: Exercise 'merge.log' to configure shortlog length
merge: Make 'merge.log' an integer or boolean option
merge: Make '--log' an integer option for number of shortlog entries
fmt_merge_msg: Change fmt_merge_msg API to accept shortlog_len
Conflicts:
builtin/merge.c
It's a minor annoyance when you take the painstaking time to setup To:
headers for each patch in a large series, and then go out to send the
series with git-send-email and watch git ignore the To: headers in the
patch files.
Therefore, always add To: headers from a patch file to the To: headers
for that message. Keep the prompt for the blanket To: header so as to
not break scripts (and user expectations). This means even if a patch
has a To: header, git will prompt for the To: address. Otherwise, we'll
need to introduce interface breakage to either request the header for
each patch missing a To: header or default the header to whatever To:
address is found first (be it in a patch or from user input). Both of
these options don't seem very obvious/useful.
Reported-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Tested-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git stash branch <branch> <stash>" started discarding the stash
when the branch creation fails. It should have kept the stash
intact when aborting.
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This bug was disovered by someone on IRC when he tried to
$ git stash branch <branch> <stash>
while <branch> already existed. In that case the stash is dropped even
though it isn't applied on any branch, so the stash is effectively lost.
Signed-off-by: Tomas Carnecky <tom@dbservice.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Formalize our dependency on perl 5.8, bumped from 5.6.[12]. We already
used the three-arg form of open() which was introduced in 5.6.1, but
t/t9700/test.pl explicitly depended on 5.6.2.
However git-add--interactive.pl has been failing on the 5.6 line since
it was introduced in v1.5.0-rc0~12^2~2 back in 2006 due to this open
syntax:
sub run_cmd_pipe {
my $fh = undef;
open($fh, '-|', @_) or die;
return <$fh>;
}
Which when executed dies on "Can't use an undefined value as
filehandle reference". Several of our tests also fail on 5.6 (even
more when compiled with NO_PERL_MAKEMAKER=1):
t2016-checkout-patch.sh
t3904-stash-patch.sh
t3701-add-interactive.sh
t7105-reset-patch.sh
t7501-commit.sh
t9700-perl-git.sh
Our code is bitrotting on 5.6 with no-one interested in fixing it, and
pinning us to such an ancient release of Perl is keeping us from using
useful features introduced in the 5.8 release.
The 5.6 series is now over 10 years old, and the 5.6.2 maintenance
release almost 7. 5.8 on the other hand is more than 8 years old.
All the modern Unix-like operating systems have now upgraded to it or
a later version, and 5.8 packages are available for old IRIX, AIX
Solaris and Tru64 systems.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Acked-by: Tor Arntsen <tor@spacetec.no>
Acked-by: Randal L. Schwartz <merlyn@stonehenge.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add the ability to use a command line --to-cmd=cmd
to create the list of "To:" addresses.
Used a shared routine for --cc-cmd and --to-cmd.
Did not use IPC::Open2, leaving that for Ævar if
ever he decides to fix the other bugs he might find.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test was missing some "&&" at the end of some lines and it
was wrong because, as the replacement refs were not fetched,
the commits from the parallel branch should not show up. This
was found by Elijah Newren.
This is fixed by checking that after the branch from HASH6 is
fetched, the commits from the parallel branch don't show up,
and then by fetching the replacement refs and checking that
they do show up afterwards.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a long time (29508e1 "Isolate shared HTTP request functionality", Fri
Nov 18 11:02:58 2005), we've followed HTTP redirects with
CURLOPT_FOLLOWLOCATION.
However, when the remote HTTP server returns a redirect the default
libcurl action is to change a POST request into a GET request while
following the redirect, but the remote http backend does not expect
that.
Fix this by telling libcurl to always keep the request as type POST with
CURLOPT_POSTREDIR.
For users of libcurl older than 7.19.1, use CURLOPT_POST301 instead,
which only follows 301s instead of both 301s and 302s.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even though "-L" is POSIX, the former is more portable, and
we tend to prefer it already.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
