Currently, if the target key has a section that matches
the initial substring of another section we mistakenly
believe we've found the correct section. To avoid this
problem, ensure that the section lengths are identical
before comparison.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Document that git-unpack-objects will not produce any
results when used on a pack that exists in a repository;
move it first.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A bare "--" doesn't show up in man or html pages correctly
as two individual dashes unless backslashed as \--
in the asciidoc source. Note, no backslash is needed
inside a literal block.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Move incorrect asciidoc level 2 titles back to level 1.
Show output of git-name-rev in man page example.
Reword sentences that begin with a period (.) in asciidoc
numbered lists to work around conversion to man page bug.
Mention that git-repack now calls git-prune-packed
when the -d option is passed to it.
[imap] section headers in the config file example need to be
contained in a literal block. imap.pass is the proper config
file variable to use, not imap.password.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* Clarify that 'init' requires an argument
* Remove instances of 'SVN_URL' in the manpage, it's not an
environment variable.
* Refer to 'Additional Fetch Arguments' when documenting 'fetch'
* document --authors-file / -A option
Thanks to Pavel Roskin and Seth Falcon for bringing these issues
to my attention.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I had to move the command line parsing around a little; setup_revisions()
could mistaken <dir> for a valid ref.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When called with "--stdout", it still writes to standard output.
Notable differences to git-format-patch:
- since fmt-patch uses the standardized logging machinery, it is
no longer "From nobody", but "From <commit_sha1>",
- the empty lines before and after the "---" just before the
diffstat are no longer there,
- git-format-patch outputs the commit_sha1 just before the first
diff, which fmt-patch does not,
- the file names are no longer output to stdout, but to stderr
(since stdout is freopen()ed all the time), and
- "git fmt-patch HEAD^" does not work as expected: it outputs
*all* commits reachable from HEAD^!
The last one is possibly a showstopper. At least I used to call that
command quite often...
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to depend on bignum from openssl for rev-list to compute
merge-order, but there is no reason to use different build
recipe from other programs anymore. Just build it with git-%$X
rule like everybody else.
Noticed by Alexey Dobriyan.
Signed-off-by: Junio C Hamano <junkio@cox.net>
... so do not get refspecs from remotes/* or the config if one of them
was specified.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Use this tool to rewrite the .git/remotes/* files into the config.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now you can say
[remote.junio]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = next:next
in your .git/config.
[jc: fixed up the log message that still said "pull" ]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* js/remoteconfig:
Revert "fetch, pull: ask config for remote information"
fetch, pull: ask config for remote information
builtin-push: also ask config for remote information
builtin-push: make it official.
Fix builtin-push to honor Push: lines in remotes file.
builtin-push: resurrect parsing of Push: lines
git builtin "push"
Clean up a few entries and fix typos.
bare repository
cherry-picking
hook
topic branch
[jc: removing questionable "symbolic ref -- see 'ref'" for now.]
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
fast forward
pickaxe
refspec
tracking branch
Wild hack allows "link:git-" prefix to reference commands too.
Signed-off-by: Jon Loeliger <jdl@jdl.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Somebody on the #git channel complained that the sha1_to_hex() thing uses
a static buffer which caused an error message to show the same hex output
twice instead of showing two different ones.
That's pretty easily rectified by making it uses a simple LRU of a few
buffers, which also allows some other users (that were aware of the buffer
re-use) to be written in a more straightforward manner.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes git-blame useable again, it has been totally broken for
some time on larger repositories.
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was rightly noticed that the logic is quite convoluted. Fix that.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On 5/4/06, Linus Torvalds <torvalds@osdl.org> wrote:
> No it wasn't. "git log --parents" was definitely supposed to still work.
>
> That said, I suspect a git-cvsserver kind of usage is better off using
> "git-rev-list --parents HEAD" instead, which didn't break in the first
> place.
Post 1.3.0 "git log" forgets to list parent commits on the first line
when --parents is given. git-cvsserver relied on it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is useless to preserve multiple hash entries for consecutive blocks
with the same hash. Keeping only the first one will allow for matching
the longest string of identical bytes while subsequent blocks will only
allow for shorter matches. The backward matching code will match the
end of it as necessary.
This improves both performances (no repeated string compare with long
successions of identical bytes, or even small group of bytes), as well
as compression (less likely to need random hash bucket entry culling),
especially with sparse files.
With well behaved data sets this patch doesn't change much.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is my assembly freak side looking at generated code again. And
since create_delta() is certainly pretty high on the radar every bits
count. In this case shorter code is generated if hash_mask is not
copied to a local variable.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When inspecting a project whose build infrastructure used to
assume that .git/HEAD is a symlink ref, core.prefersymlinkrefs
in the config file of such a project would help to bisect its
history.
Signed-off-by: Junio C Hamano <junkio@cox.net>
With --get-regexp, output all key/value pairs where the key matches a
regexp. Example:
git-repo-config --get-regexp remote.*.url
will output something like
remote.junio.url git://git.kernel.org/pub/scm/git/git.git
remote.gitk.url git://git.kernel.org/pub/scm/gitk/gitk.git
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* git://git.kernel.org/pub/scm/gitk/gitk:
gitk: Allow view to specify arbitrary arguments to git-rev-list
gitk: Fix file list display when files are renamed
gitk: Basic support for highlighting one view within another
gitk: Add a tree-browsing mode
gitk: Use a text widget for the file list
gitk: add menu item for editing the current view
gitk: Implement "permanent" views (stored in ~/.gitk)
gitk: Use git-rev-parse only to identify file/dir names on cmd line
gitk: Remember the view in the history list
gitk: Don't reread git-rev-list output from scratch on view switch
gitk: Fix various bugs in the view support
gitk: Make File->Update work properly again
gitk: Implement multiple views
[PATCH] gitk: Add a visual tag for remote refs
The earlier code descended into Documentation/technical when
given "Documentation/how*" as the pattern, which was too loose.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The list of arguments to git-rev-list, including arguments that
select the range of commits, is now a part of the view specification.
If any arguments are given to gitk, they become part of the
"Command line" view, and the non-file arguments become the default
for any new views created.
Getting an error from git-rev-list is no longer fatal; instead the
error window pops up, and when you press OK, the main window just
shows "No commits selected".
The git-rev-list arguments are entered in an entry widget in the
view editor window using shell quoting conventions, not Tcl quoting
conventions.
Signed-off-by: Paul Mackerras <paulus@samba.org>
