When an alias starts with an exclamation mark, the rest is interpreted
as a shell command. However, all arguments passed to git used to be
ignored.
Now you can have an alias like
$ git config alias.e '!echo'
and
$ git e Hello World
does what you expect it to do.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* ei/worktree+filter:
filter-branch: always export GIT_DIR if it is set
setup_git_directory: fix segfault if repository is found in cwd
test GIT_WORK_TREE
extend rev-parse test for --is-inside-work-tree
Use new semantics of is_bare/inside_git_dir/inside_work_tree
introduce GIT_WORK_TREE to specify the work tree
test git rev-parse
rev-parse: introduce --is-bare-repository
rev-parse: document --is-inside-git-dir
This switches the checks around upon the exit codepath of the
git wrapper, so that we may recover at least non-transient errors.
It's still not perfect. As I've been harping on, stdio simply isn't very
good for error reporting. For example, if an IO error happened, you'd want
to see EIO, wouldn't you? And yes, that's what the kernel would return.
However, with buffered stdio (and flushing outside of our control), what
would likely happen is that some intermediate error return _does_ return
EIO, but then the kernel might decide to re-mount the filesystem read-only
due to the error, and the actual *report* for us might be
"write failure on standard output: read-only filesystem"
which lost the EIO.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is trying to implement the strict IO error checks that Jim Meyering
suggested, but explicitly limits it to just regular files. If a pipe gets
closed on us, we shouldn't complain about it.
If the subcommand already returned an error, that takes precedence (and we
assume that the subcommand already printed out any relevant messages
relating to it)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This should change no code at all, it just moves the definition of "struct
cmd_struct" out, and then splits out the running of the right command into
the "run_command()" function.
It also removes the long-unused 'envp' pointer passing.
This is just preparation for adding some more error checking.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Aliases changing environment variables (GIT_DIR or
GIT_WORK_TREE) can cause problems:
git has to use GIT_DIR to read the aliases from the config.
After running handle_options for the alias the options of the
alias may have changed environment variables. Depending on
the implementation of setenv the memory location obtained
through getenv earlier may contain the old value or the new
value (or even be used for something else?). To avoid these
problems git errors out if an alias uses any option which
changes environment variables.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Up to now to check for a working tree this was used:
!is_bare && !inside_git_dir
(the check for bare is redundant because is_inside_git_dir
returned already 1 for bare repositories).
Now the check is:
inside_work_tree && !inside_git_dir
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
setup_gdg is used as abbreviation for setup_git_directory_gently.
The work tree can be specified using the environment variable
GIT_WORK_TREE and the config option core.worktree (the environment
variable has precendence over the config option). Additionally
there is a command line option --work-tree which sets the
environment variable.
setup_gdg does the following now:
GIT_DIR unspecified
repository in .git directory
parent directory of the .git directory is used as work tree,
GIT_WORK_TREE is ignored
GIT_DIR unspecified
repository in cwd
GIT_DIR is set to cwd
see the cases with GIT_DIR specified what happens next and
also see the note below
GIT_DIR specified
GIT_WORK_TREE/core.worktree unspecified
cwd is used as work tree
GIT_DIR specified
GIT_WORK_TREE/core.worktree specified
the specified work tree is used
Note on the case where GIT_DIR is unspecified and repository is in cwd:
GIT_WORK_TREE is used but is_inside_git_dir is always true.
I did it this way because setup_gdg might be called multiple
times (e.g. when doing alias expansion) and in successive calls
setup_gdg should do the same thing every time.
Meaning of is_bare/is_inside_work_tree/is_inside_git_dir:
(1) is_bare_repository
A repository is bare if core.bare is true or core.bare is
unspecified and the name suggests it is bare (directory not
named .git). The bare option disables a few protective
checks which are useful with a working tree. Currently
this changes if a repository is bare:
updates of HEAD are allowed
git gc packs the refs
the reflog is disabled by default
(2) is_inside_work_tree
True if the cwd is inside the associated working tree (if there
is one), false otherwise.
(3) is_inside_git_dir
True if the cwd is inside the git directory, false otherwise.
Before this patch is_inside_git_dir was always true for bare
repositories.
When setup_gdg finds a repository git_config(git_default_config) is
always called. This ensure that is_bare_repository makes use of
core.bare and does not guess even though core.bare is specified.
inside_work_tree and inside_git_dir are set if setup_gdg finds a
repository. The is_inside_work_tree and is_inside_git_dir functions
will die if they are called before a successful call to setup_gdg.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint-1.5.1:
annotate: make it work from subdirectories.
git-config: Correct asciidoc documentation for --int/--bool
t1300: Add tests for git-config --bool --get
unpack-trees.c: verify_uptodate: remove dead code
Use PATH_MAX instead of TEMPFILE_PATH_LEN
branch: fix segfault when resolving an invalid HEAD
This adds the basic infrastructure to assign attributes to
paths, in a way similar to what the exclusion mechanism does
based on $GIT_DIR/info/exclude and .gitignore files.
An attribute is just a simple string that does not contain any
whitespace. They can be specified in $GIT_DIR/info/attributes
file, and .gitattributes file in each directory.
Each line in these files defines a pattern matching rule.
Similar to the exclusion mechanism, a later match overrides an
earlier match in the same file, and entries from .gitattributes
file in the same directory takes precedence over the ones from
parent directories. Lines in $GIT_DIR/info/attributes file are
used as the lowest precedence default rules.
A line is either a comment (an empty line, or a line that begins
with a '#'), or a rule, which is a whitespace separated list of
tokens. The first token on the line is a shell glob pattern.
The rest are names of attributes, each of which can optionally
be prefixed with '!'. Such a line means "if a path matches this
glob, this attribute is set (or unset -- if the attribute name
is prefixed with '!'). For glob matching, the same "if the
pattern does not have a slash in it, the basename of the path is
matched with fnmatch(3) against the pattern, otherwise, the path
is matched with the pattern with FNM_PATHNAME" rule as the
exclusion mechanism is used.
This does not define what an attribute means. Tying an
attribute to various effects it has on git operation for paths
that have it will be specified separately.
Signed-off-by: Junio C Hamano <junkio@cox.net>
handle_options did not count the number of used arguments
correctly. When --git-dir was used the extra argument was
not added to the number of handled arguments.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Commit 64edf4b2 cleaned up the initialization of git-archive,
at the cost of 'git-archive --list' now requiring a git repo.
This patch reverts the cleanup and documents the requirement
for this particular dirtyness in a test.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/fetch:
.gitignore: add git-fetch--tool
builtin-fetch--tool: fix reflog notes.
git-fetch: retire update-local-ref which is not used anymore.
builtin-fetch--tool: make sure not to overstep ls-remote-result buffer.
fetch--tool: fix uninitialized buffer when reading from stdin
builtin-fetch--tool: adjust to updated sha1_object_info().
git-fetch--tool takes flags before the subcommand.
Use stdin reflist passing in git-fetch.sh
Use stdin reflist passing in parse-remote
Allow fetch--tool to read from stdin
git-fetch: rewrite expand_ref_wildcard in C
git-fetch: rewrite another shell loop in C
git-fetch: move more code into C.
git-fetch--tool: start rewriting parts of git-fetch in C.
git-fetch: split fetch_main into fetch_dumb and fetch_native
* maint:
Unset NO_C99_FORMAT on Cygwin.
Fix a "pointer type missmatch" warning.
Fix some "comparison is always true/false" warnings.
Fix an "implicit function definition" warning.
Fix a "label defined but unreferenced" warning.
Document the config variable format.suffix
git-merge: fail correctly when we cannot fast forward.
builtin-archive: use RUN_SETUP
Fix git-gc usage note
* np/types: (253 commits)
get rid of lookup_object_type()
convert object type handling from a string to a number
formalize typename(), and add its reverse type_from_string()
sha1_file.c: don't ignore an error condition in sha1_loose_object_info()
sha1_file.c: cleanup "offset" usage
sha1_file.c: cleanup hdr usage
git-apply: do not fix whitespaces on context lines.
diff --cc: integer overflow given a 2GB-or-larger file
mailinfo: do not get confused with logical lines that are too long.
Documentation: link in 1.5.0.2 material to the top documentation page.
Documentation: document remote.<name>.tagopt
GIT 1.5.0.2
git-remote: support remotes with a dot in the name
Documentation: describe "-f/-t/-m" options to "git-remote add"
diff --cc: fix display of symlink conflicts during a merge.
merge-recursive: fix longstanding bug in merging symlinks
merge-index: fix longstanding bug in merging symlinks
diff --cached: give more sensible error message when HEAD is yet to be created.
Update tests to use test-chmtime
Add test-chmtime: a utility to change mtime on files
...
* master: (201 commits)
Documentation: link in 1.5.0.2 material to the top documentation page.
Documentation: document remote.<name>.tagopt
GIT 1.5.0.2
git-remote: support remotes with a dot in the name
Documentation: describe "-f/-t/-m" options to "git-remote add"
diff --cc: fix display of symlink conflicts during a merge.
merge-recursive: fix longstanding bug in merging symlinks
merge-index: fix longstanding bug in merging symlinks
diff --cached: give more sensible error message when HEAD is yet to be created.
Update tests to use test-chmtime
Add test-chmtime: a utility to change mtime on files
Add Release Notes to prepare for 1.5.0.2
Allow arbitrary number of arguments to git-pack-objects
rerere: do not deal with symlinks.
rerere: do not skip two conflicted paths next to each other.
Don't modify CREDITS-FILE if it hasn't changed.
diff-patch: Avoid emitting double-slashes in textual patch.
Reword git-am 3-way fallback failure message.
Limit filename for format-patch
core.legacyheaders: Use the description used in RelNotes-1.5.0
...
Some workflows require use of repositories on machines that cannot be
connected, preventing use of git-fetch / git-push to transport objects and
references between the repositories.
git-bundle provides an alternate transport mechanism, effectively allowing
git-fetch and git-pull to operate using sneakernet transport. `git-bundle
create` allows the user to create a bundle containing one or more branches
or tags, but with specified basis assumed to exist on the target
repository. At the receiving end, git-bundle acts like git-fetch-pack,
allowing the user to invoke git-fetch or git-pull using the bundle file as
the URL. git-fetch and git-ls-remote determine they have a bundle URL by
checking that the URL points to a file, but are otherwise unchanged in
operation with bundles.
The original patch was done by Mark Levedahl <mdl123@verizon.net>.
It was updated to make git-bundle a builtin, and get rid of the tar
format: now, the first line is supposed to say "# v2 git bundle", the next
lines either contain a prerequisite ("-" followed by the hash of the
needed commit), or a ref (the hash of a commit, followed by the name of
the ref), and finally the pack. As a result, the bundle argument can be
"-" now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With this flag and given two paths, git-diff-files behaves as a GNU diff
lookalike (plus the git goodies like --check, colour, etc.). This flag
is also available in git-diff. It also works outside of a git repository.
In addition, if git-diff{,-files} is called without revision or stage
parameter, and with exactly two paths at least one of which is not tracked,
the default is --no-index.
So, you can now say
git diff /etc/inittab /etc/fstab
and it actually works!
This also unifies the duplicated argument parsing between cmd_diff_files()
and builtin_diff_files().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This mechanically converts strncmp() to use prefixcmp(), but only when
the parameters match specific patterns, so that they can be verified
easily. Leftover from this will be fixed in a separate step, including
idiotic conversions like
if (!strncmp("foo", arg, 3))
=>
if (!(-prefixcmp(arg, "foo")))
This was done by using this script in px.perl
#!/usr/bin/perl -i.bak -p
if (/strncmp\(([^,]+), "([^\\"]*)", (\d+)\)/ && (length($2) == $3)) {
s|strncmp\(([^,]+), "([^\\"]*)", (\d+)\)|prefixcmp($1, "$2")|;
}
if (/strncmp\("([^\\"]*)", ([^,]+), (\d+)\)/ && (length($1) == $3)) {
s|strncmp\("([^\\"]*)", ([^,]+), (\d+)\)|(-prefixcmp($2, "$1"))|;
}
and running:
$ git grep -l strncmp -- '*.c' | xargs perl px.perl
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the alias expansion is prefixed with an exclamation point, treat
it as a shell command which is run using system(3).
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch helps when you accidentally run something like git-clean
in the git directory instead of the work tree.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier change df391b192 to rename fsck-objects to fsck broke
fsck-objects. This should fix it again.
Signed-off-by: Mark Wooding <mdw@distorted.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Starting a pager defeats the purpose of the incremental output
mode. This changes git-blame to only paginate if --incremental
was not given.
git -p blame --incremental still starts the pager, though.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/bare:
Disallow working directory commands in a bare repository.
git-fetch: allow updating the current branch in a bare repository.
Introduce is_bare_repository() and core.bare configuration variable
Move initialization of log_all_ref_updates
If the user tries to run a porcelainish command which requires
a working directory in a bare repository they may get unexpected
results which are difficult to predict and may differ from command
to command.
Instead we should detect that the current repository is a bare
repository and refuse to run the command there, as there is no
working directory associated with it.
[jc: updated Shawn's original somewhat -- bugs are mine.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Make "init" the equivalent of "init-db". This should make first GIT
impression a little more friendly.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We tend to use the nice constant GIT_DIR_ENVIRONMENT when we
are referring to the "GIT_DIR" constant, but git.c didn't do
so. Now it does.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For easier portability we prefer PATH_MAX over seemingly random
constants like 1024. Make it so.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/fsck-reflog:
Add git-reflog to .gitignore
reflog expire: do not punt on tags that point at non commits.
reflog expire: prune commits that are not incomplete
Don't crash during repack of a reflog with pruned commits.
git reflog expire
Move in_merge_bases() to commit.c
reflog: fix warning message.
Teach git-repack to preserve objects referred to by reflog entries.
Protect commits recorded in reflog from pruning.
add for_each_reflog_ent() iterator
The option checking code for --git-dir had an off by 1 error that
would cause it to access uninitialized memory if it was the last
argument. This causes it to display an error and display the usage
string instead.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The perl version used modules which are non-standard in some setups.
This patch brings the full power of rerere to a wider audience.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This prepares a place to collect reflog management subcommands,
and implements "expire" action.
$ git reflog expire --dry-run \
--expire=4.weeks \
--expire-unreachable=1.week \
refs/heads/master
The expiration uses two timestamps: --expire and --expire-unreachable.
Entries older than expire time (defaults to 90 days), and entries older
than expire-unreachable time (defaults to 30 days) and records a commit
that has been rewound and made unreachable from the current tip of the
ref are removed from the reflog.
The parameter handling is still rough, but I think the
core logic for expiration is already sound.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a mechanical clean-up of the way *.c files include
system header files.
(1) sources under compat/, platform sha-1 implementations, and
xdelta code are exempt from the following rules;
(2) the first #include must be "git-compat-util.h" or one of
our own header file that includes it first (e.g. config.h,
builtin.h, pkt-line.h);
(3) system headers that are included in "git-compat-util.h"
need not be included in individual C source files.
(4) "git-compat-util.h" does not have to include subsystem
specific header files (e.g. expat.h).
Signed-off-by: Junio C Hamano <junkio@cox.net>
merge-file has the same syntax as RCS merge, but supports only the
"-L" option.
For good measure, a test is added, which is quite minimal, though.
[jc: further fix for compliation errors included.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
On request of the kingpenguin, shortlog now uses the pager if output
goes to a tty.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: with minimum squelching of compiler warning under "-pedantic"
compilation options.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just make it take over blame's place. Documentation and command
have all stopped mentioning "git-pickaxe". The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lj/refs: (63 commits)
Fix show-ref usagestring
t3200: git-branch testsuite update
sha1_name.c: avoid compilation warnings.
Make git-branch a builtin
ref-log: fix D/F conflict coming from deleted refs.
git-revert with conflicts to behave as git-merge with conflicts
core.logallrefupdates thinko-fix
git-pack-refs --all
core.logallrefupdates create new log file only for branch heads.
Remove bashism from t3210-pack-refs.sh
ref-log: allow ref@{count} syntax.
pack-refs: call fflush before fsync.
pack-refs: use lockfile as everybody else does.
git-fetch: do not look into $GIT_DIR/refs to see if a tag exists.
lock_ref_sha1_basic does not remove empty directories on BSD
Do not create tag leading directories since git update-ref does it.
Check that a tag exists using show-ref instead of looking for the ref file.
Use git-update-ref to delete a tag instead of rm()ing the ref file.
Fix refs.c;:repack_without_ref() clean-up path
Clean up "git-branch.sh" and add remove recursive dir test cases.
...
* jc/web-blame:
gitweb: spell "blame --porcelain" with -p
blame: Document and add help text for -f, -n, and -p
gitweb: blame porcelain: lineno and orig lineno swapped
Remove git-annotate.perl and create a builtin-alias for git-blame
gitweb: use blame --porcelain
git-blame --porcelain
blame.c: move code to output metainfo into a separate function.
git-blame: --show-number (and -n)
git-blame: --show-name (and -f)
blame.c: whitespace and formatting clean-up.
Gitweb - provide site headers and footers
gitweb: blame: Mouse-over commit-8 shows author and date
gitweb: blame: print commit-8 on the leading row of a commit-block
Revert 954a618375
gitweb: prepare for repositories with packed refs.
gitweb: make leftmost column of blame less cluttered.
This replaces git-branch.sh with builtin-branch.c
The changes is basically a patch from Kristian Hgsberg, updated
to apply onto current 'next'
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This replaces the shell script git-cherry with a version written in C.
The behaviour of the new version differs from the original in two
points: it has no long help any more, and it is handling the (optional)
third parameter a bit differently. Basically, it does the equivalent
of
ours=`git-rev-list $ours ^$limit ^$upstream`
instead of
ours=`git-rev-list $ours ^$limit`
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently it does what git-blame does, but only faster.
More importantly, its internal structure is designed to support
content movement (aka cut-and-paste) more easily by allowing
more than one paths to be taken from the same commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Noted by Jiri Slaby, git-tar-tree --remote doesn't need to be run
from inside of a git archive. Since git-tar-tree is now only a
wrapper for git-archive, which calls setup_git_directory() as
needed, we should drop the flag RUN_SETUP.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Still not managed to understand git-send-mail sufficiently well to not
accidently miss of this list when I sending it to Junio
Signed-off-by: Alan Chandler <alan@chandlerfamily.org.uk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (72 commits)
runstatus: do not recurse into subdirectories if not needed
grep: fix --fixed-strings combined with expression.
grep: free expressions and patterns when done.
Corrected copy-and-paste thinko in ignore executable bit test case.
An illustration of rev-list --parents --pretty=raw
Allow git-checkout when on a non-existant branch.
gitweb: Decode long title for link tooltips
git-svn: Fix fetch --no-ignore-externals with GIT_SVN_NO_LIB=1
Ignore executable bit when adding files if filemode=0.
Remove empty ref directories that prevent creating a ref.
Use const for interpolate arguments
git-archive: update documentation
Deprecate merge-recursive.py
gitweb: fix over-eager application of esc_html().
Allow '(no author)' in git-svn's authors file.
Allow 'svn fetch' on '(no date)' revisions in Subversion.
git-repack: allow git-repack to run in subdirectory
Remove upload-tar and make git-tar-tree a thin wrapper to git-archive
git-tar-tree: Move code for git-archive --format=tar to archive-tar.c
git-tar-tree: Remove duplicate git_config() call
...
* jc/lt-ref2-with-lt-refs:
Fix show-ref usage for --dereference.
Document git-show-ref [-s|--hash] option.
Add man page for git-show-ref
gitignore: git-show-ref is a generated file.
Use Linus' show ref in "git-branch.sh".
Add [-s|--hash] option to Linus' show-ref.
Teach "git checkout" to use git-show-ref
Add "git show-ref" builtin command
The command now issues a big deprecation warning message and runs
git-archive command with appropriate arguments.
git-tar-tree $tree_ish $base always forces $base to be the leading
directory name, so the --prefix parameter passed internally to
git-archive is a slash appended to it, i.e. "--prefix=$base/".
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-zip-tree can be safely removed because it was never part of a formal
release. This patch makes 'git-archive --format=zip' the one and only git
ZIP file creation command.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/refs: (58 commits)
git-pack-refs --prune
pack-refs: do not pack symbolic refs.
Tell between packed, unpacked and symbolic refs.
Add callback data to for_each_ref() family.
symbolit-ref: fix resolve_ref conversion.
Fix broken sha1 locking
fsck-objects: adjust to resolve_ref() clean-up.
gitignore: git-pack-refs is a generated file.
wt-status: use simplified resolve_ref to find current branch
Fix t1400-update-ref test minimally
Enable the packed refs file format
Make ref resolution saner
Add support for negative refs
Start handling references internally as a sorted in-memory list
gitweb fix validating pg (page) parameter
git-repack(1): document --window and --depth
git-apply(1): document --unidiff-zero
gitweb: fix warnings in PATH_INFO code and add export_ok/strict_export
upload-archive: monitor child communication even more carefully.
gitweb: export options
...
* lt/refs: (58 commits)
git-pack-refs --prune
pack-refs: do not pack symbolic refs.
Tell between packed, unpacked and symbolic refs.
Add callback data to for_each_ref() family.
symbolit-ref: fix resolve_ref conversion.
Fix broken sha1 locking
fsck-objects: adjust to resolve_ref() clean-up.
gitignore: git-pack-refs is a generated file.
wt-status: use simplified resolve_ref to find current branch
Fix t1400-update-ref test minimally
Enable the packed refs file format
Make ref resolution saner
Add support for negative refs
Start handling references internally as a sorted in-memory list
gitweb fix validating pg (page) parameter
git-repack(1): document --window and --depth
git-apply(1): document --unidiff-zero
gitweb: fix warnings in PATH_INFO code and add export_ok/strict_export
upload-archive: monitor child communication even more carefully.
gitweb: export options
...
This also adds some very rudimentary support for the notion of packed
refs. HOWEVER! At this point it isn't used to actually look up a ref
yet, only for listing them (ie "for_each_ref()" and friends see the
packed refs, but none of the other single-ref lookup routines).
Note how we keep two separate lists: one for the loose refs, and one for
the packed refs we read. That's so that we can easily keep the two apart,
and read only one set or the other (and still always make sure that the
loose refs take precedence).
[ From this, it's not actually obvious why we'd keep the two separate
lists, but it's important to have the packed refs on their own list
later on, when I add support for looking up a single loose one.
For that case, we will want to read _just_ the packed refs in case the
single-ref lookup fails, yet we may end up needing the other list at
some point in the future, so keeping them separated is important ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jk/diff:
wt-status: remove extraneous newline from 'deleted:' output
git-status: document colorization config options
Teach runstatus about --untracked
git-commit.sh: convert run_status to a C builtin
Move color option parsing out of diff.c and into color.[ch]
diff: support custom callbacks for output
* jc/archive:
git-tar-tree: devolve git-tar-tree into a wrapper for git-archive
git-archive: inline default_parse_extra()
builtin-archive.c: rename remote_request() to extract_remote_arg()
upload-archive: monitor child communication more carefully.
Add sideband status report to git-archive protocol
Prepare larger packet buffer for upload-pack protocol.
Teach --exec to git-archive --remote
Add --verbose to git-archive
archive: force line buffered output to stderr
Use xstrdup instead of strdup in builtin-{tar,zip}-tree.c
Move sideband server side support into reusable form.
Move sideband client side support into reusable form.
archive: allow remote to have more formats than we understand.
git-archive: make compression level of ZIP archives configurable
Add git-upload-archive
git-archive: wire up ZIP format.
git-archive: wire up TAR format.
Add git-archive
This adds a new command, git-for-each-ref. You can have it iterate
over refs and have it output various aspects of the objects they
refer to.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It's kind of like "git peek-remote", but works only locally (and thus
avoids the whole overhead of git_connect()) and has some extra
verification features.
For example, it allows you to filter the results, and to choose whether
you want the tag dereferencing or not. You can also use it to just test
whether a particular ref exists.
For example:
git show-ref master
will show all references called "master", whether tags or heads or
anything else, and regardless of how deep in the reference naming
hierarchy they are (so it would show "refs/heads/master" but also
"refs/remote/other-repo/master").
When using the "--verify" flag, the command requires an exact ref path:
git show-ref --verify refs/heads/master
will only match the exact branch called "master".
If nothing matches, show-ref will return an error code of 1, and in the
case of verification, it will show an error message.
For scripting, you can ask it to be quiet with the "--quiet" flag, which
allows you to do things like
git-show-ref --quiet --verify -- "refs/heads/$headname" ||
echo "$headname is not a valid branch"
to check whether a particular branch exists or not (notice how we don't
actually want to show any results, and we want to use the full refname for
it in order to not trigger the problem with ambiguous partial matches).
To show only tags, or only proper branch heads, use "--tags" and/or
"--heads" respectively (using both means that it shows tags _and_ heads,
but not other random references under the refs/ subdirectory).
To do automatic tag object dereferencing, use the "-d" or "--dereference"
flag, so you can do
git show-ref --tags --dereference
to get a listing of all tags together with what they dereference.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
describe, git: Handle argc==0 case the same way as argc==1.
merge-tree: Refuse excessive arguments.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Call setup_git_directory() to make these commands work in subdirectory.
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This command implements the git archive protocol on the server
side. This command is not intended to be used by the end user.
Underlying git-archive command line options are sent over the
protocol from "git-archive --remote=...", just like upload-tar
currently does with "git-tar-tree=...".
As for "git-archive" command implementation, this new command
does not execute any existing "git-{tar,zip}-tree" but rely
on the archive API defined by "git-archive" patch. Hence we
get 2 good points:
- "git-archive" and "git-upload-archive" share all option
parsing code.
- All kind of git-upload-{tar,zip} can be deprecated.
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-archive is a command to make TAR and ZIP archives of a git tree.
It helps prevent a proliferation of git-{format}-tree commands.
Instead of directly calling git-{tar,zip}-tree command, it defines
a very simple API, that archiver should implement and register in
"git-archive.c". This API is made up by 2 functions whose prototype
is defined in "archive.h" file.
- The first one is used to parse 'extra' parameters which have
signification only for the specific archiver. That would allow
different archive backends to have different kind of options.
- The second one is used to ask to an archive backend to build
the archive given some already resolved parameters.
The main reason for making this API is to avoid using
git-{tar,zip}-tree commands, hence making them useless. Maybe it's
time for them to die ?
It also implements remote operations by defining a very simple
protocol: it first sends the name of the specific uploader followed
the repository name (git-upload-tar git://example.org/repo.git).
Then it sends options. It's done by sending a sequence of one
argument per packet, with prefix "argument ", followed by a flush.
The remote protocol is implemented in "git-archive.c" for client
side and is triggered by "--remote=<repo>" option. For example,
to fetch a TAR archive in a remote repo, you can issue:
$ git archive --format=tar --remote=git://xxx/yyy/zzz.git HEAD
We choose to not make a new command "git-fetch-archive" for example,
avoind one more GIT command which should be nice for users (less
commands to remember, keeps existing --remote option).
Signed-off-by: Franck Bui-Huu <vagabon.xyz@gmail.com>
Acked-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This creates a new git-runstatus which should do roughly the same thing
as the run_status function from git-commit.sh. Except for color support,
the main focus has been to keep the output identical, so that it can be
verified as correct and then used as a C platform for other improvements to
the status printing code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some memory was allocated for a new path but not freed
after the path was used.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If GIT_TRACE is set to an absolute path (starting with a
'/' character), we interpret this as a file path and we
trace into it.
Also if GIT_TRACE is set to an integer value greater than
1 and lower than 10, we interpret this as an open fd value
and we trace into it.
Note that this behavior is not compatible with the
previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
This patch makes it possible to get trace information when
running "make test".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Like xmalloc and xrealloc xstrdup dies with a useful message if
the native strdup() implementation returns NULL rather than a
valid pointer.
I just tried to use xstrdup in new code and found it to be missing.
However I expected it to be present as xmalloc and xrealloc are
already commonly used throughout the code.
[jc: removed the part that deals with last_XXX, which I am
finding more and more dubious these days.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
In the Windows world ZIP files are better supported than tar files.
Windows even includes built-in support for ZIP files nowadays.
git-zip-tree is similar to git-tar-tree; it creates ZIP files out of
git trees. It stores the commit ID (if available) in a ZIP file comment
which can be extracted by unzip.
There's still quite some room for improvement: this initial version
supports no symlinks, calls write() way too often (three times per file)
and there is no unit test.
[jc: with a minor typefix to avoid void* arithmetic]
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Change places that use realloc, without a proper error path, to instead use
xrealloc. Drop an erroneous error path in the daemon code that used errno
in the die message in favour of the simpler xrealloc.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
builtin-mv.c and git.c has a nested loop that is governed by a
variable 'i', but they shadow it with another instance of 'i'.
Signed-off-by: Pierre Habouzit <madcoder@debian.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: I needed to hand merge the changes to the updated codebase,
so the result needs to be checked.]
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Convert git-verify-pack to a builtin command. Also rename ac to argc
and av to argv for consistancy.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The semantics are equivalent to pushing from the root; we just try harder to
find the .git directory.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As Matthias Kestenholz noted, the flag does not quite mean
"needs prefix" -- it is more like "run setup_git_directory()
before running this command", so rename it to avoid future
confusion.
While we are at it, rewrite the definition of options to make it
obvious that we are talking about flag bits by using standard (1<<n)
notation.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the build procedure for built-in commands by:
- generating mostly redundant definition of BUILT_INS from
BUILTIN_OBJS in the Makefile,
- renaming a few files to make the above possible, and
- sorting the built-in command table in git.c.
It might be a good idea to binary search (or perfect hash) the built-in
command table, but that can be done later when somebody feels like.
Signed-off-by: Junio C Hamano <junkio@cox.net>
