* cb/push-quiet:
t5541: avoid TAP test miscounting
fix push --quiet: add 'quiet' capability to receive-pack
server_supports(): parse feature list more carefully
6f48d39 (clone: delay cloning until after remote HEAD checking -
2012-01-16) allows us to perform some checks on remote refs before the
actual cloning happens. But not all transport types support
this. Remote helper with "import" capability will not return complete
ref information until fetch is performed and therefore the clone cannot
be delayed.
foreign_vcs field in struct remote was used to detect this kind of transport
and save the result. This is a mistake because foreign_vcs is designed
to override url-based transport detection. As a result, if the same
"struct transport *" object is used on many different urls and one of
them attached remote transport, the following urls will be mistakenly
attached to the same transport. This fault is worked around by dad0b3d
(push: do not let configured foreign-vcs permanently clobbered -
2012-01-23)
To fix this, detect incomplete refs from transport_get_remote_refs()
by SHA-1. Incomplete ones must have null SHA-1 (*). Then revert
changes related to foreign_cvs field in 6f48d39 and dad0b3d.
A good thing from this change is that cloning smart http transport can
also be delayed. Earlier it falls into the same category "remote
transport, no delay".
(*) Theoretically if one of the remote refs happens to have null SHA-1,
it will trigger false alarm and the clone will not be delayed. But
that chance may be too small for us to pay attention to.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Recently, 6f48d39 (clone: delay cloning until after remote HEAD checking,
2012-01-16) tried to record if a remote helper needs to be called after
parsing the remote when transport_get() is called, by overwriting the
field meant to store the configured remote helper name in the remote
structure.
This is OK when a remote represents a single remote repository, but fails
miserably when pushing to locations with multiple URLs, like this:
$ cat .git/config
[remote "origin"]
url = https://code.google.com/p/git-htmldocs/
url = github.com:gitster/git-htmldocs.git
push = refs/heads/master:refs/heads/master
$ git push
The second url that is supposed to use the git-over-ssh transport
mistakenly use https:// and fails with:
error: Couldn't resolve host 'github.com:gitster' while accessing
github.com:gitster/git-htmldocs.git/info/refs
fatal: HTTP request failed
The right solution would probably be to dedicate a separate field to store
the detected external helper to be used, which is valid only during a
single use of transport until it is disconnected, instead of overwriting
foreign_vcs field, but in the meantime, this band-aid should suffice.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally, a cleanly resolved merge was committed by "git merge" using
the auto-generated merge commit log message without invoking the editor.
After 5 years of use in the field, it turns out that people perform too
many unjustified merges of the upstream history into their topic branches.
These merges are not just useless, but they are often not explained well,
and making the end result unreadable when it gets time for merging their
history back to their upstream.
Earlier we added the "--edit" option to the command, so that people can
edit the log message to explain and justify their merge commits. Let's
take it one step further and spawn the editor by default when we are in an
interactive session (i.e. the standard input and the standard output are
pointing at the same tty device).
There may be existing scripts that leave the standard input and the
standard output of the "git merge" connected to whatever environment the
scripts were started, and such invocation might trigger the above
"interactive session" heuristics. GIT_MERGE_AUTOEDIT environment variable
can be set to "no" at the beginning of such scripts to use the historical
behaviour while the script runs.
Note that this backward compatibility is meant only for scripts, and we
deliberately do *not* support "merge.edit = yes/no/auto" configuration
option to allow people to keep the historical behaviour.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In threaded mode, git-grep emits file breaks (enabled with context, -W
and --break) into the accumulation buffers even if they are not
required. The output collection thread then uses skip_first_line to
skip the first such line in the output, which would otherwise be at
the very top.
This is wrong when the user also specified -l/-L/-c, in which case
every line is relevant. While arguably giving these options together
doesn't make any sense, git-grep has always quietly accepted it. So
do not skip anything in these cases.
Signed-off-by: Albert Yale <surfingalbert@gmail.com>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
write_remote_refs() creates new packed refs from references obtained
from the remote repository, which is "out of thin air" as far as the
local repository is concerned. Previously it did this by creating
"extra" refs, then calling pack_refs() to bake them into the
packed-refs file. Instead, create packed refs (in the packed
reference cache) directly, then call pack_refs().
Aside from being more logical, this is another step towards removing
extra refs entirely.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because a tag ref cannot be put to HEAD, HEAD will become detached.
This is consistent with "git checkout <tag>".
This is mostly useful in shallow clone, where it allows you to clone a
tag in addtion to branches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible that users make a typo in the branch name. Stop and let
users recheck. Falling back to remote's HEAD is not documented any
way.
Except when using remote helper, the pack has not been transferred at
this stage yet so we don't waste much bandwidth.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It does not make sense to look outside refs/heads for HEAD's target
(src_ref_prefix can be set to "refs/" if --mirror is used) because ref
code only allows symref in form refs/heads/...
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This gives us an opportunity to abort the command during remote HEAD
check without wasting much bandwidth.
Cloning with remote-helper remains before the check because the remote
helper updates mapped_refs, which is necessary for remote ref checks.
foreign_vcs field is used to indicate the transport is handled by
remote helper.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, update the comment at "if (remote_head)"
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Read HEAD from disk instead of relying on local variable
our_head_points_at, so that if earlier code fails to make HEAD
properly, it'll be detected.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we don't write, HEAD is still at refs/heads/master as initialized
by init-db, which may or may not match remote's HEAD.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The logic for the -b mode, where [PATCH] is dropped but [foo] is not,
silently ate all spaces after the ].
Fix this by keeping the next isspace() character, if there is any.
Being more thorough is pointless, as the later cleanup_space() call
will normalize any sequence of whitespace to a single ' '.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Revese the order of delta applying so that by the time a delta is
applied, its base is either non-delta or already inflated.
get_base_data() is still recursive, but because base's data is always
ready, the inner get_base_data() call never has any chance to call
itself again.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Current find_unresolved_deltas() links all bases together in a form of
tree, using struct base_data, with prev_base pointer to point to
parent node. Then it traverses down from parent to children in
recursive manner with all base_data allocated on stack.
To eliminate recursion, we simply need to put all on heap
(parse_pack_objects and fix_unresolved_deltas). After that, it's
simple non-recursive depth-first traversal loop. Each node also
maintains its own state (ofs and ref indices) to iterate over all
children nodes.
So we process one node:
- if it returns a new (child) node (a parent base), we link it to our
tree, then process the new node.
- if it returns nothing, the node is done, free it. We go back to
parent node and resume whatever it's doing.
and do it until we have no nodes to process.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Update draft release notes to 1.7.8.4
Update draft release notes to 1.7.7.6
Update draft release notes to 1.7.6.6
thin-pack: try harder to use preferred base objects as base
When creating a pack using objects that reside in existing packs, we try
to avoid recomputing futile delta between an object (trg) and a candidate
for its base object (src) if they are stored in the same packfile, and trg
is not recorded as a delta already. This heuristics makes sense because it
is likely that we tried to express trg as a delta based on src but it did
not produce a good delta when we created the existing pack.
As the pack heuristics prefer producing delta to remove data, and Linus's
law dictates that the size of a file grows over time, we tend to record
the newest version of the file as inflated, and older ones as delta
against it.
When creating a thin-pack to transfer recent history, it is likely that we
will try to send an object that is recorded in full, as it is newer. But
the heuristics to avoid recomputing futile delta effectively forbids us
from attempting to express such an object as a delta based on another
object. Sending an object in full is often more expensive than sending a
suboptimal delta based on other objects, and it is even more so if we
could use an object we know the receiving end already has (i.e. preferred
base object) as the delta base.
Tweak the recomputation avoidance logic, so that we do not punt on
computing delta against a preferred base object.
The effect of this change can be seen on two simulated upload-pack
workloads. The first is based on 44 reflog entries from my git.git
origin/master reflog, and represents the packs that kernel.org sent me git
updates for the past month or two. The second workload represents much
larger fetches, going from git's v1.0.0 tag to v1.1.0, then v1.1.0 to
v1.2.0, and so on.
The table below shows the average generated pack size and the average CPU
time consumed for each dataset, both before and after the patch:
dataset
| reflog | tags
---------------------------------
before | 53358 | 2750977
size after | 32398 | 2668479
change | -39% | -3%
---------------------------------
before | 0.18 | 1.12
CPU after | 0.18 | 1.15
change | +0% | +3%
This patch makes a much bigger difference for packs with a shorter slice
of history (since its effect is seen at the boundaries of the pack) though
it has some benefit even for larger packs.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expose the cherry-picking machinery through a public
sequencer_pick_revisions() (renamed from pick_revisions() in
builtin/revert.c), so that cherry-picking and reverting are special
cases of a general sequencer operation. The cherry-pick builtin is
now a thin wrapper that does command-line argument parsing before
calling into sequencer_pick_revisions(). In the future, we can write
a new "foo" builtin that calls into the sequencer like:
memset(&opts, 0, sizeof(opts));
opts.action = REPLAY_FOO;
opts.revisions = xmalloc(sizeof(*opts.revs));
parse_args_populate_opts(argc, argv, &opts);
init_revisions(opts.revs);
sequencer_pick_revisions(&opts);
This patch does not intend to make any functional changes. Check
with:
$ git blame -s -C HEAD^..HEAD -- sequencer.c | grep -C3 '^[^^]'
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
REVERT and CHERRY_PICK and are unsuitable names for an enumerator in a
public interface, because they are generic enough to be likely to
clash with identifiers with other meanings. Rename to REPLAY_REVERT
and REPLAY_PICK as preparation for exposing them.
Helped-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reason why the trailing slash is needed is obvious. refs/stash and
HEAD are not namespace, but complete refs. Do full string compare on them.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/ref-api-less-extra-refs:
write_head_info(): handle "extra refs" locally
show_ref(): remove unused "flag" and "cb_data" arguments
receive-pack: move more work into write_head_info()
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Commit 90a6c7d4 (propagate --quiet to send-pack/receive-pack)
introduced the --quiet option to receive-pack and made send-pack
pass that option. Older versions of receive-pack do not recognize
the option, however, and terminate immediately. The commit was
therefore reverted.
This change instead adds a 'quiet' capability to receive-pack,
which is a backwards compatible.
In addition, this fixes push --quiet via http: A verbosity of 0
means quiet for remote helpers.
Reported-by: Tobias Ulmer <tobiasu@tmux.org>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have been carefully choosing feature names used in the protocol
extensions so that the vocabulary does not contain a word that is a
substring of another word, so it is not a real problem, but we have
recently added "quiet" feature word, which would mean we cannot later
add some other word with "quiet" (e.g. "quiet-push"), which is awkward.
Let's make sure that we can eventually be able to do so by teaching the
clients and servers that feature words consist of non whitespace
letters. This parser also allows us to later add features with parameters
e.g. "feature=1.5" (parameter values need to be quoted for whitespaces,
but we will worry about the detauls when we do introduce them).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --single-branch is given, only one branch, either HEAD or one
specified by --branch, will be fetched. Also only tags that point to
the downloaded history are fetched.
This helps most in shallow clones, where it can reduce the download to
minimum and that is why it is enabled by default when --depth is given.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/show-sig:
log --show-signature: reword the common two-head merge case
log-tree: show mergetag in log --show-signature output
log-tree.c: small refactor in show_signature()
commit --amend -S: strip existing gpgsig headers
verify_signed_buffer: fix stale comment
gpg-interface: allow use of a custom GPG binary
pretty: %G[?GS] placeholders
test "commit -S" and "log --show-signature"
log: --show-signature
commit: teach --gpg-sign option
Conflicts:
builtin/commit-tree.c
builtin/commit.c
builtin/merge.c
notes-cache.c
pretty.c
The old code basically did:
generate array of SHA1s for alternate refs
for each unique SHA1 in array:
add_extra_ref(".have", sha1)
for each ref (including real refs and extra refs):
show_ref(refname, sha1)
But there is no need to stuff the alternate refs in extra_refs; we can
call show_ref() directly when iterating over the array, then handle
real refs separately. So change the code to:
generate array of SHA1s for alternate refs
for each unique SHA1 in array:
show_ref(".have", sha1)
for each ref (this now only includes real refs):
show_ref(refname, sha1)
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The function is not used as a callback, so it doesn't need these
arguments. Also change its return type to void.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move some more code from the calling site into write_head_info(), and
inline add_alternate_refs() there. (Some more simplification is
coming, and it is easier if all this code is in the same place.)
Move some helper functions to avoid the need for forward declarations.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Any existing commit signature was made against the contents of the old
commit, including its committer date that is about to change, and will
become invalid by amending it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
They both use the extended headers in commit objects, and the former has
necessary infrastructure to show them that is useful to view the result of
the latter.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The FETCH_HEAD refname is supposed to refer to the ref that was fetched
and should be merged. However all fetched refs are written to
.git/FETCH_HEAD in an arbitrary order, and resolve_ref_unsafe simply
takes the first ref as the FETCH_HEAD, which is often the wrong one,
when other branches were also fetched.
The solution is to write the for-merge ref(s) to FETCH_HEAD first.
Then, unless --append is used, the FETCH_HEAD refname behaves as intended.
If the user uses --append, they presumably are doing so in order to
preserve the old FETCH_HEAD.
While we are at it, update an old example in the read-tree documentation
that implied that each entry in FETCH_HEAD only has the object name, which
is not true for quite a while.
[jc: adjusted tests]
Signed-off-by: Joey Hess <joey@kitenet.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-m-twoway:
t/t2023-checkout-m.sh: fix use of test_must_fail
checkout_merged(): squelch false warning from some gcc
Test 'checkout -m -- path'
checkout -m: no need to insist on having all 3 stages
* jn/maint-sequencer-fixes:
revert: stop creating and removing sequencer-old directory
Revert "reset: Make reset remove the sequencer state"
revert: do not remove state until sequence is finished
revert: allow single-pick in the middle of cherry-pick sequence
revert: pass around rev-list args in already-parsed form
revert: allow cherry-pick --continue to commit before resuming
revert: give --continue handling its own function
* jk/maint-mv:
mv: be quiet about overwriting
mv: improve overwrite warning
mv: make non-directory destination error more clear
mv: honor --verbose flag
docs: mention "-k" for both forms of "git mv"
* jk/fetch-no-tail-match-refs:
connect.c: drop path_match function
fetch-pack: match refs exactly
t5500: give fully-qualified refs to fetch-pack
drop "match" parameter from get_remote_heads
* ab/sun-studio-portability:
Appease Sun Studio by renaming "tmpfile"
Fix a bitwise negation assignment issue spotted by Sun Studio
Fix an enum assignment issue spotted by Sun Studio
* rs/diff-tree-combined-clean-up:
submodule: use diff_tree_combined_merge() instead of diff_tree_combined()
pass struct commit to diff_tree_combined_merge()
use struct sha1_array in diff_tree_combined()
* tr/grep-threading:
grep: disable threading in non-worktree case
grep: enable threading with -p and -W using lazy attribute lookup
grep: load funcname patterns for -W
* nd/war-on-nul-in-commit:
commit_tree(): refuse commit messages that contain NULs
Convert commit_tree() to take strbuf as message
merge: abort if fails to commit
Conflicts:
builtin/commit.c
commit.c
commit.h
Advice messages are by definition meant for human end-users, and prime
candidates for i18n/l10n. They tend to also be more verbose to be helpful,
and need to be longer than just one line.
Although we do not have parameterized multi-line advice messages yet, once
we do, we cannot emit such a message like this:
advise(_("Please rename %s to something else"), gostak);
advise(_("so that we can avoid distimming %s unnecessarily."), doshes);
because some translations may need to have the replacement of 'gostak' on
the second line (or 'doshes' on the first line). Some languages may even
need to use three lines in order to fit the same message within a
reasonable width.
Instead, it has to be a single advise() construct, like this:
advise(_("Please rename %s to something else\n"
"so that we can avoid distimming %s unnecessarily."),
gostak, doshes);
Update the advise() function and its existing callers to
- take a format string that can be multi-line and translatable as a
whole;
- use the string and the parameters to form a localized message; and
- show each line in the result with the localization of the "hint: ".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is to give an alternate <name> instead of "origin" to the remote
we are cloning from.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"abbrev" and "commit_format" in struct rev_info get initialized in
init_revisions - no need to reinit in cmd_log_init_defaults.
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Solaris the system headers define the "tmpfile" name, which'll
cause Git compiled with Sun Studio 12 Update 1 to whine about us
redefining the name:
"pack-write.c", line 76: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"sha1_file.c", line 2455: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"fast-import.c", line 858: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
"builtin/index-pack.c", line 175: warning: name redefined by pragma redefine_extname declared static: tmpfile (E_PRAGMA_REDEFINE_STATIC)
Just renaming the "tmpfile" variable to "tmp_file" in the relevant
places is the easiest way to fix this.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In builtin/fast-export.c we'd assign to variables of the
tag_of_filtered_mode enum type with constants defined for the
signed_tag_mode enum.
We'd get the intended value since both the value we were assigning
with and the one we actually wanted had the same positional within
their respective enums, but doing it this way makes no sense.
This issue was spotted by Sun Studio 12 Update 1:
"builtin/fast-export.c", line 54: warning: enum type mismatch: op "=" (E_ENUM_TYPE_MISMATCH_OP)
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Solaris systems we'd warn about an implicit cast of mode_t when we
printed things out with the %d format. We'd get this warning under GCC
4.6.0 with Solaris headers:
builtin/init-db.c: In function ‘separate_git_dir’:
builtin/init-db.c:354:4: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘mode_t’ [-Wformat]
We've been doing this ever since v1.7.4.1-296-gb57fb80. Just work
around this by adding an explicit cast.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The earlier ed7a42a (commit: teach --amend to carry forward extra headers,
2011-11-08) broke "git merge/pull; edit to fix conflict; git commit"
workflow by forgetting that commit_tree_extended() takes the whole extra
header list.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/checkout-m-twoway:
checkout_merged(): squelch false warning from some gcc
Test 'checkout -m -- path'
checkout -m: no need to insist on having all 3 stages
* jk/fetch-no-tail-match-refs:
connect.c: drop path_match function
fetch-pack: match refs exactly
t5500: give fully-qualified refs to fetch-pack
drop "match" parameter from get_remote_heads
* nd/resolve-ref:
Rename resolve_ref() to resolve_ref_unsafe()
Convert resolve_ref+xstrdup to new resolve_refdup function
revert: convert resolve_ref() to read_ref_full()
* jn/maint-sequencer-fixes:
revert: stop creating and removing sequencer-old directory
Revert "reset: Make reset remove the sequencer state"
revert: do not remove state until sequence is finished
revert: allow single-pick in the middle of cherry-pick sequence
revert: pass around rev-list args in already-parsed form
revert: allow cherry-pick --continue to commit before resuming
revert: give --continue handling its own function
* jk/maint-mv:
mv: be quiet about overwriting
mv: improve overwrite warning
mv: make non-directory destination error more clear
mv: honor --verbose flag
docs: mention "-k" for both forms of "git mv"
* tr/cache-tree:
reset: update cache-tree data when appropriate
commit: write cache-tree data when writing index anyway
Refactor cache_tree_update idiom from commit
Test the current state of the cache-tree optimization
Add test-scrap-cache-tree
Maintaining an array of hashes is easier using sha1_array than
open-coding it. This patch also fixes a leak of the SHA1 array
in diff_tree_combined_merge().
Signed-off-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/stream-to-pack:
bulk-checkin: replace fast-import based implementation
csum-file: introduce sha1file_checkpoint
finish_tmp_packfile(): a helper function
create_tmp_packfile(): a helper function
write_pack_header(): a helper function
Conflicts:
pack.h
Measurements by various people have shown that grepping in parallel is
not beneficial when the object store is involved. For example, with a
simple regex:
Threads | --cached case | worktree case
----------------------------------------------------------------
8 (default) | 2.88u 0.21s 0:02.94real | 0.19u 0.32s 0:00.16real
4 | 2.89u 0.29s 0:02.99real | 0.16u 0.34s 0:00.17real
2 | 2.83u 0.36s 0:02.87real | 0.18u 0.32s 0:00.26real
NO_PTHREADS | 2.16u 0.08s 0:02.25real | 0.12u 0.17s 0:00.31real
This happens because all the threads contend on read_sha1_mutex almost
all of the time. A more complex regex allows the threads to do more
work in parallel, but as Jeff King found out, the "super boost" (much
higher clock when only one core is active) feature of recent CPUs
still causes the unthreaded case to win by a large margin.
So until the pack machinery allows unthreaded access, we disable
grep's threading in all but the worktree case.
Helped-by: René Scharfe <rene.scharfe@lsrfire.ath.cx>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Lazily load the userdiff attributes in match_funcname(). Use a
separate mutex around this loading to protect the (not thread-safe)
attributes machinery. This lets us re-enable threading with -p and
-W while reducing the overhead caused by looking up attributes.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format_todo() calls get_message(), but uses only the subject line of
the commit message. As a minor optimization, save work and
unnecessary memory allocations by using find_commit_subject() instead.
Also, remove the unnecessary check on cur->item->buffer: the
lookup_commit_reference() call in parse_insn_line() has already made
sure of this.
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tolerate extra spaces and tabs as part of the the field separator in
'.git/sequencer/todo', for people with fat fingers.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the instruction sheet format subtly so that the subject of the
commit message that follows the object name is optional. As a result,
an instruction sheet like this is now perfectly valid:
pick 35b0426
pick fbd5bbcbc2e
pick 7362160f
While at it, also fix a bug introduced by 5a5d80f4 (revert: Introduce
--continue to continue the operation, 2011-08-04) that failed to read
lines that are too long to fit on the commit-id-shaped buffer we
currently use; eliminate the need for the buffer altogether. In
addition to literal SHA-1 hexes, you can now safely use expressions
like the following in the instruction sheet:
featurebranch~4
rr/revert-cherry-pick-continue^2~12@{12 days ago}
[jc: simplify parsing]
Suggested-by: Jonathan Nieder <jrnieder@gmail.com>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Memory allocated to the fields of msg by get_message() isn't freed.
This is potentially a big leak, because fresh memory is allocated to
store the commit message for each commit. Fix this using
free_message().
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There wan't a way for commit_tree() to notice if the message the caller
prepared contained a NUL byte, as it did not take the length of the
message as a parameter. Use a pointer to a strbuf instead, so that we can
either choose to allow low-level plumbing commands to make commits that
contain NUL byte in its message, or forbid NUL everywhere by adding the
check in commit_tree(), in later patches.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
gcc 4.6.2 (there may be others) does not realize that the variable "mode"
can never be used uninitialized in this function and issues a false warning
under -Wuninitialized option.
Squelch it with an unnecessary initialization; it is not like a single
assignment matters to the performance in this codepath that writes out
to the filesystem with checkout_entry() anyway.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/misc-cleanups:
unpack_object_header_buffer(): clear the size field upon error
tree_entry_interesting: make use of local pointer "item"
tree_entry_interesting(): give meaningful names to return values
read_directory_recursive: reduce one indentation level
get_tree_entry(): do not call find_tree_entry() on an empty tree
tree-walk.c: do not leak internal structure in tree_entry_len()
* maint-1.7.7:
Git 1.7.7.5
Git 1.7.6.5
blame: don't overflow time buffer
fetch: create status table using strbuf
checkout,merge: loosen overwriting untracked file check based on info/exclude
cast variable in call to free() in builtin/diff.c and submodule.c
apply: get rid of useless x < 0 comparison on a size_t type
Conflicts:
Documentation/git.txt
GIT-VERSION-GEN
RelNotes
builtin/fetch.c
When showing the raw timestamp, we format the numeric
seconds-since-epoch into a buffer, followed by the timezone
string. This string has come straight from the commit
object. A well-formed object should have a timezone string
of only a few bytes, but we could be operating on data
pushed by a malicious user.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are determining the list of refs to fetch via
fetch-pack, we have two sets of refs to compare: those on
the remote side, and a "match" list of things we want to
fetch. We iterate through the remote refs alphabetically,
seeing if each one is wanted by the "match" list.
Since def88e9 (Commit first cut at "git-fetch-pack",
2005-07-04), we have used the "path_match" function to do a
suffix match, where a remote ref is considered wanted if
any of the "match" elements is a suffix of the remote
refname.
This enables callers of fetch-pack to specify unqualified
refs and have them matched up with remote refs (e.g., ask
for "A" and get remote's "refs/heads/A"). However, if you
provide a fully qualified ref, then there are corner cases
where we provide the wrong answer. For example, given a
remote with two refs:
refs/foo/refs/heads/master
refs/heads/master
asking for "refs/heads/master" will first match
"refs/foo/refs/heads/master" by the suffix rule, and we will
erroneously fetch it instead of refs/heads/master.
As it turns out, all callers of fetch_pack do provide
fully-qualified refs for the match list. There are two ways
fetch_pack can get match lists:
1. Through the transport code (i.e., via git-fetch)
2. On the command-line of git-fetch-pack
In the first case, we will always be providing the names of
fully-qualified refs from "struct ref" objects. We will have
pre-matched those ref objects already (since we have to
handle more advanced matching, like wildcard refspecs), and
are just providing a list of the refs whose objects we need.
In the second case, users could in theory be providing
non-qualified refs on the command-line. However, the
fetch-pack documentation claims that refs should be fully
qualified (and has always done so since it was written in
2005).
Let's change this path_match call to simply check for string
equality, matching what the callers of fetch_pack are
expecting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The get_remote_heads function reads the list of remote refs
during git protocol session. It dates all the way back to
def88e9 (Commit first cut at "git-fetch-pack", 2005-07-04).
At that time, the idea was to come up with a list of refs we
were interested in, and then filter the list as we got it
from the remote side.
Later, 1baaae5 (Make maximal use of the remote refs,
2005-10-28) stopped filtering at the get_remote_heads layer,
letting us use the non-matching refs to find common history.
As a result, all callers now simply pass an empty match
list (and any future callers will want to do the same). So
let's drop these now-useless parameters.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a shared buffer and can be
overwritten by the next resolve_ref() calls. Callers need to
pay attention, not to keep the pointer when the next call happens.
Rename with "_unsafe" suffix to warn developers (or reviewers) before
introducing new call sites.
This patch is generated using the following command
git grep -l 'resolve_ref(' -- '*.[ch]'|xargs sed -i 's/resolve_ref(/resolve_ref_unsafe(/g'
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tell the user what this command is intended for, and expand the
description of what it does.
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a user asks us to force a mv and overwrite the
destination, we print a warning. However, since a typical
use would be:
$ git mv one two
fatal: destination exists, source=one, destination=two
$ git mv -f one two
warning: overwriting 'two'
this warning is just noise. We already know we're
overwriting; that's why we gave -f!
This patch silences the warning unless "--verbose" is given.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we try to "git mv" over an existing file, the error
message is fairly informative:
$ git mv one two
fatal: destination exists, source=one, destination=two
When the user forces the overwrite, we give a warning:
$ git mv -f one two
warning: destination exists; will overwrite!
This is less informative, but still sufficient in the simple
rename case, as there is only one rename happening.
But when moving files from one directory to another, it
becomes useless:
$ mkdir three
$ touch one two three/one
$ git add .
$ git mv one two three
fatal: destination exists, source=one, destination=three/one
$ git mv -f one two three
warning: destination exists; will overwrite!
The first message is helpful, but the second one gives us no
clue about what was overwritten. Let's mention the name of
the destination file:
$ git mv -f one two three
warning: overwriting 'three/one'
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that "git reset" no longer implicitly removes .git/sequencer that
the operator may or may not have wanted to keep, the logic to write a
backup copy of .git/sequencer and remove it when stale is not needed
any more. Simplify the sequencer API and repository layout by
dropping it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As v1.7.8-rc0~141^2~4 (2011-08-04) explains, git cherry-pick removes
the sequencer state just before applying the final patch. In the
single-pick case, that was a good thing, since --abort and --continue
work fine without access to such state and removing it provides a
signal that git should not complain about the need to clobber it ("a
cherry-pick or revert is already in progress") in sequences like the
following:
git cherry-pick foo
git read-tree -m -u HEAD; # forget that; let's try a different one
git cherry-pick bar
After the recent patch "allow single-pick in the middle of cherry-pick
sequence" we don't need that hack any more. In the new regime, a
traditional "git cherry-pick <commit>" command never looks at
.git/sequencer, so we do not need to cripple "git cherry-pick
<commit>..<commit>" for it any more.
So now you can run "git cherry-pick --abort" near the end of a
multi-pick sequence and it will abort the entire sequence, instead of
misbehaving and aborting just the final commit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After messing up a difficult conflict resolution in the middle of a
cherry-pick sequence, it can be useful to be able to
git checkout HEAD . && git cherry-pick that-one-commit
to restart the conflict resolution. The current code however errors out
saying that another cherry-pick is already in progress.
Suggested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 7e2bfd3f (revert: allow cherry-picking more than one commit,
2010-07-02), the pick/revert machinery has kept track of the set of
commits to be cherry-picked or reverted using commit_argc and
commit_argv variables, storing the corresponding command-line
parameters.
Future callers as other commands are built in (am, rebase, sequencer)
may find it easier to pass rev-list options to this machinery in
already-parsed form. Teach cmd_cherry_pick and cmd_revert to parse
the rev-list arguments in advance and pass the commit set to
pick_revisions() as a rev_info structure.
Original patch by Jonathan, tweaks and test from Ram.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When "git cherry-pick ..bar" encounters conflicts, permit the operator
to use cherry-pick --continue after resolving them as a shortcut for
"git commit && git cherry-pick --continue" to record the resolution
and carry on with the rest of the sequence.
This improves the analogy with "git rebase" (in olden days --continue
was the way to preserve authorship when a rebase encountered
conflicts) and fits well with a general UI goal of making "git cmd
--continue" save humans the trouble of deciding what to do next.
Example: after encountering a conflict from running "git cherry-pick
foo bar baz":
CONFLICT (content): Merge conflict in main.c
error: could not apply f78a8d98c... bar!
hint: after resolving the conflicts, mark the corrected paths
hint: with 'git add <paths>' or 'git rm <paths>'
hint: and commit the result with 'git commit'
We edit main.c to resolve the conflict, mark it acceptable with "git
add main.c", and can run "cherry-pick --continue" to resume the
sequence.
$ git cherry-pick --continue
[editor opens to confirm commit message]
[master 78c8a8c98] bar!
1 files changed, 1 insertions(+), 1 deletions(-)
[master 87ca8798c] baz!
1 files changed, 1 insertions(+), 1 deletions(-)
This is done for both codepaths to pick multiple commits and a single
commit.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This makes pick_revisions() a little shorter and easier to read
straight through.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you try to "git mv" multiple files onto another
non-directory file, you confusingly get the "usage" message:
$ touch one two three
$ git add .
$ git mv one two three
usage: git mv [options] <source>... <destination>
[...]
From the user's perspective, that makes no sense. They just
gave parameters that exactly match that usage!
This behavior dates back to the original C version of "git
mv", which had a usage message like:
usage: git mv (<source> <destination> | <source>... <destination>)
This was slightly less confusing, because it at least
mentions that there are two ways to invoke (but it still
isn't clear why what the user provided doesn't work).
Instead, let's show an error message like:
$ git mv one two three
fatal: destination 'three' is not a directory
We could leave the usage message in place, too, but it
doesn't actually help here. It contains no hints that there
are two forms, nor that multi-file form requires that the
endpoint be a directory. So it just becomes useless noise
that distracts from the real error.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The code for a verbose flag has been here since "git mv" was
converted to C many years ago, but actually getting the "-v"
flag from the command line was accidentally lost in the
transition.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is the follow up of c689332 (Convert many resolve_ref() calls to
read_ref*() and ref_exists() - 2011-11-13). See the said commit for
rationale.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fetch from a remote, we print a status table like:
From url
* [new branch] foo -> origin/foo
We create this table in a static buffer using sprintf. If
the remote refnames are long, they can overflow this buffer
and smash the stack.
Instead, let's use a strbuf to build the string.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/resolve-ref:
Copy resolve_ref() return value for longer use
Convert many resolve_ref() calls to read_ref*() and ref_exists()
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
refs.c
* jc/pull-signed-tag:
commit-tree: teach -m/-F options to read logs from elsewhere
commit-tree: update the command line parsing
commit: teach --amend to carry forward extra headers
merge: force edit and no-ff mode when merging a tag object
commit: copy merged signed tags to headers of merge commit
merge: record tag objects without peeling in MERGE_HEAD
merge: make usage of commit->util more extensible
fmt-merge-msg: Add contents of merged tag in the merge message
fmt-merge-msg: package options into a structure
fmt-merge-msg: avoid early returns
refs DWIMmery: use the same rule for both "git fetch" and others
fetch: allow "git fetch $there v1.0" to fetch a tag
merge: notice local merging of tags and keep it unwrapped
fetch: do not store peeled tag object names in FETCH_HEAD
Split GPG interface into its own helper library
Conflicts:
builtin/fmt-merge-msg.c
builtin/merge.c
* jc/request-pull-show-head-4:
request-pull: use the annotated tag contents
fmt-merge-msg.c: Fix an "dubious one-bit signed bitfield" sparse error
environment.c: Fix an sparse "symbol not declared" warning
builtin/log.c: Fix an "Using plain integer as NULL pointer" warning
fmt-merge-msg: use branch.$name.description
request-pull: use the branch description
request-pull: state what commit to expect
request-pull: modernize style
branch: teach --edit-description option
format-patch: use branch description in cover letter
branch: add read_branch_desc() helper function
Conflicts:
builtin/branch.c
Normally git tag strips tag message lines starting with '#', trailing
spaces from every line and empty lines from the beginning and end.
--cleanup allows to select different cleanup modes for tag message.
It provides the same interface as --cleanup option in git-commit.
Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After making fixes to the contents to be committed, it is not unusual to
update the current commit without rewording the message. Idioms to tell
"commit --amend" that we do not need an editor have been:
$ EDITOR=: git commit --amend
$ git commit --amend -C HEAD
but that was only because a more natural "--no-edit" option in
$ git commit --amend --no-edit
was not honoured.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of --mixed and --hard, we throw away the old index and
rebuild everything from the tree argument (or HEAD). So we have an
opportunity here to fill in the cache-tree data, just as read-tree
did.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In prepare_index(), we refresh the index, and then write it to disk if
this changed the index data. After running hooks we re-read the index
and compute the root tree sha1 with the cache-tree machinery.
This gives us a mostly free opportunity to write up-to-date cache-tree
data: we can compute it in prepare_index() immediately before writing
the index to disk.
If we do this, we were going to write the index anyway, and the later
cache-tree update has no further work to do. If we don't do it, we
don't do any extra work, though we still don't have have cache-tree
data after the commit.
The only case that suffers badly is when the pre-commit hook changes
many trees in the index. I'm writing this off as highly unusual.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We'll need to safely create or update the cache-tree data of the_index
from other places. While at it, give it an argument that lets us
silence the messages produced by unmerged entries (which prevent it
from working).
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The content level merge machinery ll_merge() is prepared to merge
correctly in "both sides added differently" case by using an empty blob as
if it were the common ancestor. "checkout -m" could do the same, but didn't
bother supporting it and instead insisted on having all three stages.
Reported-by: Pete Harlan
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a static buffer. Callers that
use this value longer than a couple of statements should copy the
value to avoid some hidden resolve_ref() call that may change the
static buffer's value.
The bug found by Tony Wang <wwwjfy@gmail.com> in builtin/merge.c
demonstrates this. The first call is in cmd_merge()
branch = resolve_ref("HEAD", head_sha1, 0, &flag);
Then deep in lookup_commit_or_die() a few lines after, resolve_ref()
may be called again and destroy "branch".
lookup_commit_or_die
lookup_commit_reference
lookup_commit_reference_gently
parse_object
lookup_replace_object
do_lookup_replace_object
prepare_replace_object
for_each_replace_ref
do_for_each_ref
get_loose_refs
get_ref_dir
get_ref_dir
resolve_ref
All call sites are checked and made sure that xstrdup() is called if
the value should be saved.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* nd/fsck-progress:
fsck: print progress
fsck: avoid reading every object twice
verify_packfile(): check as many object as possible in a pack
fsck: return error code when verify_pack() goes wrong
* nd/misc-cleanups:
unpack_object_header_buffer(): clear the size field upon error
tree_entry_interesting: make use of local pointer "item"
tree_entry_interesting(): give meaningful names to return values
read_directory_recursive: reduce one indentation level
get_tree_entry(): do not call find_tree_entry() on an empty tree
tree-walk.c: do not leak internal structure in tree_entry_len()
The comment on top of stripspace() claims that the buffer
will no longer be NUL-terminated. However, this has not been
the case at least since the move to using strbuf in 2007.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When git apply is passed something that is not a patch, it does not produce
an error message or exit with a non-zero status if it was not actually
"applying" the patch i.e. --check or --numstat etc were supplied on the
command line.
Fix this by producing an error when apply fails to find any hunks whatsoever
while parsing the patch.
This will cause some of the output formats (--numstat, --diffstat, etc) to
produce an error when they formerly would have reported zero changes and
exited successfully. That seems like the correct behavior though. Failure
to recognize the input as a patch should be an error.
Plus, add a test.
Reported-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This extends the earlier approach to stream a large file directly from the
filesystem to its own packfile, and allows "git add" to send large files
directly into a single pack. Older code used to spawn fast-import, but the
new bulk-checkin API replaces it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When on master, "git checkout -B master <commit>" is a more natural way to
say "git reset --keep <commit>", which was originally invented for the
exact purpose of moving to the named commit while keeping the local changes
around.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Overwriting the current branch with a different commit is forbidden, as it
will make the status recorded in the index and the working tree out of
sync with respect to the HEAD. There however is no reason to forbid it if
the current branch is renamed to itself, which admittedly is something
only an insane user would do, but is handy for scripts.
Test script is by Conrad Irwin.
Reported-by: Soeren Sonnenburg <sonne@debian.org>
Reported-by: Josh Chia (谢任中)
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Conrad Irwin <conrad.irwin@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Ignored files usually are generated files (e.g. .o files) and can be
safely discarded. However sometimes users may have important files in
working directory, but still want a clean "git status", so they mark
them as ignored files. But in this case, these files should not be
overwritten without asking first.
Enable this use case with --no-overwrite-ignore, where git only sees
tracked and untracked files, no ignored files. Those who mix
discardable ignored files with important ones may have to sort it out
themselves.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Back in 1127148 (Loosen "working file will be lost" check in
Porcelain-ish - 2006-12-04), git-checkout.sh learned to quietly
overwrite ignored files. Howver the code only took .gitignore files
into account.
Standard ignored files include all specified in .gitignore files in
working directory _and_ $GIT_DIR/info/exclude. This patch makes sure
ignored files in info/exclude can also be overwritten automatically in
the spirit of the original patch.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option --force should not put us in 'create branch' mode. The
fact that this option is only valid in 'create branch' mode is
already caught by the the next 'if' in which we assure that we
are in the correct mode.
Without this patch, "git branch -f" without any other argument ends
up calling create_branch without any branch name.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git cherry-pick --abort" command currently renames the
.git/sequencer directory to .git/sequencer-old instead of removing it
on success due to an accident. cherry-pick --abort is designed to
work in three steps:
1) find which commit to roll back to
2) call "git reset --merge <commit>" to move to that commit
3) remove the .git/sequencer directory
But the careless author forgot step 3 entirely. The only reason the
command worked anyway is that "git reset --merge <commit>" renames the
.git/sequencer directory as a secondary effect --- after moving to
<commit>, or so the logic goes, it is unlikely but possible that the
caller of git reset wants to continue the series of cherry-picks that
was in progress, so git renames the sequencer state to
.git/sequencer-old to be helpful while allowing the cherry-pick to be
resumed if the caller did not want to end the sequence after all.
By running "git cherry-pick --abort", the operator has clearly
indicated that she is not planning to continue cherry-picking. Remove
the (renamed) .git/sequencer directory as intended all along.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On Windows, it is not possible to rename or remove a directory that has
open files. 'revert --abort' renamed .git/sequencer when it still had
.git/sequencer/head open. Close the file as early as possible to allow
the rename operation on Windows.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This fixes the following warning.
CC builtin/revert.o
builtin/revert.c: In function ‘write_cherry_pick_head’:
builtin/revert.c:311: warning: format not a string literal and no format arguments
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove the "git cherry-pick --reset" option, which has a different
preferred spelling nowadays ("--quit"). Luckily the old --reset name
was not around long enough for anyone to get used to it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running some ill-advised command like "git cherry-pick
HEAD..linux-next", the bewildered novice may want to return to more
familiar territory. Introduce a "git cherry-pick --abort" command
that rolls back the entire cherry-pick sequence and places the
repository back on solid ground.
Just like "git merge --abort", this internally uses "git reset
--merge", so local changes not involved in the conflict resolution are
preserved.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When conflicts are encountered while reverting a commit, it can be
handy to have the name of that commit easily available. For example,
to produce a copy of the patch to refer to while resolving conflicts:
$ git revert 2eceb2a8
error: could not revert 2eceb2a8... awesome, buggy feature
$ git show -R REVERT_HEAD >the-patch
$ edit $(git diff --name-only)
Set a REVERT_HEAD pseudoref when "git revert" does not make a commit,
for cases like this. This also makes it possible for scripts to
distinguish between a revert that encountered conflicts and other
sources of an unmerged index.
After successfully committing, resetting with "git reset", or moving
to another commit with "git checkout" or "git reset", the pseudoref is
no longer useful, so remove it.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the spirit of v1.6.3.3~3^2 (refuse to merge during a merge,
2009-07-01), "git cherry-pick" refuses to start a new cherry-pick when
in the middle of an existing conflicted cherry-pick in the following
sequence:
1. git cherry-pick HEAD..origin
2. resolve conflicts
3. git cherry-pick HEAD..origin (instead of "git cherry-pick
--continue", by mistake)
Good. However, the error message on attempting step 3 is more
convoluted than necessary:
$ git cherry-pick HEAD..origin
error: .git/sequencer already exists.
error: A cherry-pick or revert is in progress.
hint: Use --continue to continue the operation
hint: or --quit to forget about it
fatal: cherry-pick failed
Clarify by removing the redundant first "error:" message, simplifying
the advice, and using lower-case and no full stops to be consistent
with other commands that prefix their messages with "error:", so it
becomes
error: a cherry-pick or revert is already in progress
hint: try "git cherry-pick (--continue | --quit)"
fatal: cherry-pick failed
The "fatal: cherry-pick failed" line seems unnecessary, too, but
that can be fixed some other day.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Deal completely with "cherry-pick --quit" and --continue at the
beginning of pick_revisions(), leaving the rest of the function for
the more interesting "git cherry-pick <commits>" case.
No functional change intended. The impact is just to unindent the
code a little.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The option to "git cherry-pick" and "git revert" to discard the
sequencer state introduced by v1.7.8-rc0~141^2~6 (revert: Introduce
--reset to remove sequencer state, 2011-08-04) has a confusing name.
Change it now, while we still have the time.
The new name for "cherry-pick, please get out of my way, since I've
long forgotten about the sequence of commits I was cherry-picking when
you wrote that old .git/sequencer directory" is --quit. Mnemonic:
this is analagous to quiting a program the user is no longer using ---
we just want to get out of the multiple-command cherry-pick procedure
and not to reset HEAD or rewind any other old state.
The "--reset" option is kept as a synonym to minimize the impact. We
might consider dropping it for simplicity in a separate patch, though.
Adjust documentation and tests to use the newly preferred name (--quit)
instead of --reset. While at it, let's clarify the short descriptions
of these operations in "-h" output.
Before:
--reset forget the current operation
--continue continue the current operation
After:
--quit end revert or cherry-pick sequence
--continue resume revert or cherry-pick sequence
Noticed-by: Phil Hord <phil.hord@gmail.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The POSIX-function fork is not supported on Windows. Use our
start_command API instead, respawning ourselves in a special
"writer" mode to follow the alternate code path.
Remove the NOT_MINGW-prereq for t5000, as git-archive --remote
now works.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git merge' can be called without any arguments if merge.defaultToUpstream
is set. However, when merge.defaultToUpstream is not set, the user will be
presented the usage information as if he entered a command with a wrong
syntaxis. Ironically, the usage information confirms that no arguments are
mandatory.
This adds a proper error message telling the user why the command failed. As
a side-effect this can help the user in discovering the possibility to merge
with the upstream branch by setting merge.defaultToUpstream.
Signed-off-by: Vincent van Ravesteijn <vfr@lyx.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because git_path() calls vsnprintf(), code like
fd = open(git_path("SQUASH_MSG"), O_WRONLY | O_CREAT, 0666);
die_errno(_("Could not write to '%s'"), git_path("SQUASH_MSG"));
can end up printing an error indicator from vsnprintf() instead of
open() by mistake. Store the path we are trying to write to in a
temporary variable and pass _that_ to die_errno(), so the messages
written by git cherry-pick/revert and git merge can avoid this source
of confusion.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When --reuse-delta is in effect (which is the default), and an existing
pack in the repository has the same object registered twice (e.g. one copy
in a non-delta format and the other copy in a delta against some other
object), an attempt to repack the repository can result in a cyclic delta
dependency, causing write_one() function to infinitely recurse into
itself.
Detect such a case and break the loopy dependency by writing out an object
that is involved in such a loop in the non-delta format.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When receive-pack & fetch-pack are run and store the pack obtained over
the wire to a local repository, they internally run the index-pack command
with the --strict option. Make sure that we reject incoming packfile that
records objects twice to avoid spreading such a damage.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some of the fatal messages printed by revert and cherry-pick look ugly
like the following:
fatal: Could not open .git/sequencer/todo.: No such file or directory
The culprit here is that these callers of the die_errno() function did not
take it into account that the message string they give to it is followed
by ": <strerror>", hence the message typically should not end with the
full-stop.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() may return a pointer to a static buffer, which is not
safe for long-term use because if another resolve_ref() call happens,
the buffer may be changed. Many call sites though do not care about
this buffer. They simply check if the return value is NULL or not.
Convert all these call sites to new wrappers to reduce resolve_ref()
calls from 57 to 34. If we change resolve_ref() prototype later on
to avoid passing static buffer out, this helps reduce changes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses the gpg-interface.[ch] to allow signing the commit, i.e.
$ git commit --gpg-sign -m foo
You need a passphrase to unlock the secret key for
user: "Junio C Hamano <gitster@pobox.com>"
4096-bit RSA key, ID 96AFE6CB, created 2011-10-03 (main key ID 713660A7)
[master 8457d13] foo
1 files changed, 1 insertions(+), 0 deletions(-)
The lines of GPG detached signature are placed in a new multi-line header
field, instead of tucking the signature block at the end of the commit log
message text (similar to how signed tag is done), for multiple reasons:
- The signature won't clutter output from "git log" and friends if it is
in the extra header. If we place it at the end of the log message, we
would need to teach "git log" and friends to strip the signature block
with an option.
- Teaching new versions of "git log" and "gitk" to optionally verify and
show signatures is cleaner if we structurally know where the signature
block is (instead of scanning in the commit log message).
- The signature needs to be stripped upon various commit rewriting
operations, e.g. rebase, filter-branch, etc. They all already ignore
unknown headers, but if we place signature in the log message, all of
these tools (and third-party tools) also need to learn how a signature
block would look like.
- When we added the optional encoding header, all the tools (both in tree
and third-party) that acts on the raw commit object should have been
fixed to ignore headers they do not understand, so it is not like that
new header would be more likely to break than extra text in the commit.
A commit made with the above sample sequence would look like this:
$ git cat-file commit HEAD
tree 3cd71d90e3db4136e5260ab54599791c4f883b9d
parent b87755351a47b09cb27d6913e6e0e17e6254a4d4
author Junio C Hamano <gitster@pobox.com> 1317862251 -0700
committer Junio C Hamano <gitster@pobox.com> 1317862251 -0700
gpgsig -----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
iQIcBAABAgAGBQJOjPtrAAoJELC16IaWr+bL4TMP/RSe2Y/jYnCkds9unO5JEnfG
...
=dt98
-----END PGP SIGNATURE-----
foo
but "git log" (unless you ask for it with --pretty=raw) output is not
cluttered with the signature information.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We have kept the original "git commit-tree <tree> -p <parent> ..." syntax
forever, but "git commit-tree -p <parent> -p <parent> ... <tree>" would be
more intuitive way to spell it. Dashed flags along with their arguments
come first and then the "thing" argument after the flags.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
After running "git pull $there for-linus" to merge a signed tag, the
integrator may need to amend the resulting merge commit to fix typoes
in it. Teach --amend option to read the existing extra headers, and
carry them forward.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we allow pulling a tag from the remote site to validate the
authenticity, we should give the user the final chance to verify and edit
the merge message. The integrator is expected to leave a meaningful merge
commit log in the history. Disallow fast-forwarding in such a case to
ensure that a merge commit is always recorded.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now MERGE_HEAD records the tag objects without peeling, we could record
the result of manual conflict resolution via "git commit" without losing
the tag information. Introduce a new "mergetag" multi-line header field to
the commit object, and use it to store the entire contents of each signed
tag merged.
A commit header that has a multi-line payload begins with the header tag
(e.g. "mergetag" in this case), SP, the first line of payload, LF, and all
the remaining lines have a SP inserted at the beginning.
In hindsight, it would have been better to make "merge --continue" as the
way to continue from such an interrupted merge, not "commit", but this is
a backward compatibility baggage we would need to carry around for now.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dm/pack-objects-update:
pack-objects: don't traverse objects unnecessarily
pack-objects: rewrite add_descendants_to_write_order() iteratively
pack-objects: use unsigned int for counter and offset values
pack-objects: mark add_to_write_order() as inline
Otherwise, "git commit" wouldn't have a way to tell that we were in the
middle of merging an annotated or signed tag, not a plain commit, after
"git merge" stops to ask the user to resolve conflicts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The merge-recursive code uses the commit->util field directly to annotate
the commit objects given from the command line, i.e. the remote heads to
be merged, with a single string to be used to describe it in its trace
messages and conflict markers.
Correct this short-signtedness by redefining the field to be a pointer to
a structure "struct merge_remote_desc" that later enhancements can add
more information. Store the original objects we were told to merge in a
field "obj" in this struct, so that we can recover the tag we were told to
merge.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a contributor asks the integrator to merge her history, a signed tag
can be a good vehicle to communicate the authenticity of the request while
conveying other information such as the purpose of the topic.
E.g. a signed tag "for-linus" can be created, and the integrator can run:
$ git pull git://example.com/work.git/ for-linus
This would allow the integrator to run "git verify-tag FETCH_HEAD" to
validate the signed tag.
Update fmt-merge-msg so that it pre-fills the merge message template with
the body (but not signature) of the tag object to help the integrator write
a better merge message, in the same spirit as the existing merge.log summary
lines.
The message that comes from GPG signature validation is also included in
the merge message template to help the integrator verify it, but they are
prefixed with "#" to make them comments.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
prune already shows progress meter while pruning. The marking part may
take a few seconds or more, depending on repository size. Show
progress meter during this time too.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2564aa4 started to initialize buf.alloc, but that should actually be one
more byte than the string length due to the trailing \0. Also, do not
modify buf.alloc out of the strbuf code. Use the existing strbuf_attach
instead.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Reviewed-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In various places in the codepath, the program tries to return early
assuming there is no more work needed. That is generally untrue when
over time new features are added.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This also updates the autogenerated merge title message from "merge commit X"
to "merge tag X", and its effect can be seen in the changes to the test suite.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Bad copy-paste.
Otherwise "git remote set-branches" without necessary argument
will result in an error message and help for set-url subcommand.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fsck is usually a long process and it would be nice if it prints
progress from time to time.
Progress meter is not printed when --verbose is given because
--verbose prints a lot, there's no need for "alive" indicator.
Progress meter may provide "% complete" information but it would
be lost anyway in the flood of text.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
During verify_pack() all objects are read for SHA-1 check. Then
fsck_sha1() is called on every object, which read the object again
(fsck_sha1 -> parse_object -> read_sha1_file).
Avoid reading an object twice, do fsck_sha1 while we have an object
uncompressed data in verify_pack.
On git.git, with this patch I got:
$ /usr/bin/time ./git fsck >/dev/null
98.97user 0.90system 1:40.01elapsed 99%CPU (0avgtext+0avgdata 616624maxresident)k
0inputs+0outputs (0major+194186minor)pagefaults 0swaps
Without it:
$ /usr/bin/time ./git fsck >/dev/null
231.23user 2.35system 3:53.82elapsed 99%CPU (0avgtext+0avgdata 636688maxresident)k
0inputs+0outputs (0major+461629minor)pagefaults 0swaps
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Both of these free() calls are freeing a "const unsigned char (*)[20]"
type while free() expects a "void *". This results in the following
warning under clang 2.9:
builtin/diff.c:185:7: warning: passing 'const unsigned char (*)[20]' to parameter of type 'void *' discards qualifiers
free(parent);
^~~~~~
submodule.c:394:7: warning: passing 'const unsigned char (*)[20]' to parameter of type 'void *' discards qualifiers
free(parents);
^~~~~~~
This free()-ing without a cast was added by Jim Meyering to
builtin/diff.c in v1.7.6-rc3~4 and later by Fredrik Gustafsson in
submodule.c in v1.7.7-rc1~25^2.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to the C standard size_t is always unsigned, therefore the
comparison "n1 < 0 || n2 < 0" when n1 and n2 are size_t will always be
false.
This was raised by clang 2.9 which throws this warning when compiling
apply.c:
builtin/apply.c:253:9: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
if (n1 < 0 || n2 < 0)
~~ ^ ~
builtin/apply.c:253:19: warning: comparison of unsigned expression < 0 is always false [-Wtautological-compare]
if (n1 < 0 || n2 < 0)
~~ ^ ~
This check was originally added in v1.6.5-rc0~53^2 by Giuseppe Bilotta
while adding an option to git-apply to ignore whitespace differences.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We do not want to record tags as parents of a merge when the user does
"git pull $there tag v1.0" to merge tagged commit, but that is not a good
enough excuse to peel the tag down to commit when storing in FETCH_HEAD.
The caller of underlying "git fetch $there tag v1.0" may have other uses
of information contained in v1.0 tag in mind.
[jc: the test adjustment is to update for the new expectation]
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This mostly moves existing code from builtin/tag.c (for signing)
and builtin/verify-tag.c (for verifying) to a new gpg-interface.c
file to provide a more generic library interface.
- sign_buffer() takes a payload strbuf, a signature strbuf, and a signing
key, runs "gpg" to produce a detached signature for the payload, and
appends it to the signature strbuf. The contents of a signed tag that
concatenates the payload and the detached signature can be produced by
giving the same strbuf as payload and signature strbuf.
- verify_signed_buffer() takes a payload and a detached signature as
<ptr, len> pairs, and runs "gpg --verify" to see if the payload matches
the signature. It can optionally capture the output from GPG to allow
the callers to pretty-print it in a way more suitable for their
contexts.
"verify-tag" (aka "tag -v") used to save the whole tag contents as if it
is a detached signature, and fed gpg the payload part of the tag. It
relied on gpg to fail when the given tag is not signed but just is
annotated. The updated run_gpg_verify() function detects the lack of
detached signature in the input, and errors out without bothering "gpg".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When pushing to delete a ref, it uses 0{40} as an object name to signal
that the request is a deletion. We shouldn't trigger "deletion of a
corrupt ref" warning in such a case, which was designed to notice that a
ref points at an object that is truly missing from the repository.
Reported-by: Stefan Näwe
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Modify the option parsing heuristic to handle all -m (rename) cases,
including the no-arg case.
Previously, this "fell through" to the (argc <= 2) case and caused
segfault.
Reported-by: Stefan Näwe <stefan.naewe@atlas-elektronik.com>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cn/fetch-prune:
fetch: treat --tags like refs/tags/*:refs/tags/* when pruning
fetch: honor the user-provided refspecs when pruning refs
remote: separate out the remote_find_tracking logic into query_refspecs
t5510: add tests for fetch --prune
fetch: free all the additional refspecs
* ss/blame-textconv-fake-working-tree:
(squash) test for previous
blame.c: Properly initialize strbuf after calling, textconv_object()
Conflicts:
t/t8006-blame-textconv.sh
* ef/mingw-upload-archive:
mingw: poll.h is no longer in sys/
upload-archive: use start_command instead of fork
compat/win32/poll.c: upgrade from upstream
mingw: move poll out of sys-folder
* dm/pack-objects-update:
pack-objects: don't traverse objects unnecessarily
pack-objects: rewrite add_descendants_to_write_order() iteratively
pack-objects: use unsigned int for counter and offset values
pack-objects: mark add_to_write_order() as inline
The POSIX-function fork is not supported on Windows. Use our
start_command API instead.
As this is the last call-site that depends on the fork-stub in
compat/mingw.h, remove that as well.
Add an undocumented flag to git-archive that tells it that the
action originated from a remote, so features can be disabled.
Thanks to Jeff King for work on this part.
Remove the NOT_MINGW-prereq for t5000, as git-archive --remote
now works.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out a small logic out of the private write_pack_file() function
in builtin/pack-objects.c.
This changes the order of finishing multi-pack generation slightly. The
code used to
- adjust shared perm of temporary packfile
- rename temporary packfile to the final name
- update mtime of the packfile under the final name
- adjust shared perm of temporary idxfile
- rename temporary idxfile to the final name
but because the helper does not want to do the mtime thing, the updated
code does that step first and then all the rest.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For a plain string where only the length is known, strbuf.alloc needs to
be initialized to the length. Otherwise strbuf.alloc is 0 and a later
call to strbuf_setlen() will fail.
This bug surfaced when calling git blame under Windows on a *.doc file.
The *.doc file is converted to plain text by antiword via the textconv
mechanism. However, the plain text returned by antiword contains DOS line
endings instead of Unix line endings which triggered the strbuf_setlen()
which previous to this patch failed.
Signed-off-by: Sebastian Schuberth <sschuberth@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/grep-mutex:
builtin/grep: simplify lock_and_read_sha1_file()
builtin/grep: make lock/unlock into static inline functions
git grep: be careful to use mutexes only when they are initialized
Without this patch,
$ git clone foo .
results in this:
Cloning into ....
done.
With it:
Cloning into '.'...
done.
Signed-off-by: Richard Hartmann <richih.mailinglist@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is a basic code hygiene to avoid magic constants that are unnamed.
Besides, this helps extending the value later on for "interesting, but
cannot decide if the entry truely matches yet" (ie. prefix matches)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
tree_entry_len() does not simply take two random arguments and return
a tree length. The two pointers must point to a tree item structure,
or struct name_entry. Passing random pointers will return incorrect
value.
Force callers to pass struct name_entry instead of two pointers (with
hope that they don't manually construct struct name_entry themselves)
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* cn/fetch-prune:
fetch: treat --tags like refs/tags/*:refs/tags/* when pruning
fetch: honor the user-provided refspecs when pruning refs
remote: separate out the remote_find_tracking logic into query_refspecs
t5510: add tests for fetch --prune
fetch: free all the additional refspecs
Conflicts:
remote.c
* jk/argv-array:
run_hook: use argv_array API
checkout: use argv_array API
bisect: use argv_array API
quote: provide sq_dequote_to_argv_array
refactor argv_array into generic code
quote.h: fix bogus comment
add sha1_array API docs
* maint-1.7.6:
notes_merge_commit(): do not pass temporary buffer to other function
gitweb: Fix links to lines in blobs when javascript-actions are enabled
mergetool: no longer need to save standard input
mergetool: Use args as pathspec to unmerged files
t9159-*.sh: skip for mergeinfo test for svn <= 1.4
date.c: Support iso8601 timezone formats
remote: only update remote-tracking branch if updating refspec
remote rename: warn when refspec was not updated
remote: "rename o foo" should not rename ref "origin/bar"
remote: write correct fetch spec when renaming remote 'remote'
* mz/remote-rename:
remote: only update remote-tracking branch if updating refspec
remote rename: warn when refspec was not updated
remote: "rename o foo" should not rename ref "origin/bar"
remote: write correct fetch spec when renaming remote 'remote'
Rather nasty things happen when a mutex is not initialized but locked
nevertheless. Now, when we're not running in a threaded manner, the mutex
is not initialized, which is correct. But then we went and used the mutex
anyway, which -- at least on Windows -- leads to a hard crash (ordinarily
it would be called a segmentation fault, but in Windows speak it is an
access violation).
This problem was identified by our faithful tests when run in the msysGit
environment.
To avoid having to wrap the line due to the 80 column limit, we use
the name "WHEN_THREADED" instead of "IF_USE_THREADS" because it is one
character shorter. Which is all we need in this case.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/maint-pack-objects-compete-with-delete:
downgrade "packfile cannot be accessed" errors to warnings
pack-objects: protect against disappearing packs
* nd/maint-autofix-tag-in-head:
Accept tags in HEAD or MERGE_HEAD
merge: remove global variable head[]
merge: use return value of resolve_ref() to determine if HEAD is invalid
merge: keep stash[] a local variable
Conflicts:
builtin/merge.c
This brings back some of the performance lost in optimizing recency
order inside pack objects. We were doing extreme amounts of object
re-traversal: for the 2.14 million objects in the Linux kernel
repository, we were calling add_to_write_order() over 1.03 billion times
(a 0.2% hit rate, making 99.8% of of these calls extraneous).
Two optimizations take place here- we can start our objects array
iteration from a known point where we left off before we started trying
to find our tags, and we don't need to do the deep dives required by
add_family_to_write_order() if the object has already been marked as
filled.
These two optimizations bring some pretty spectacular results via `perf
stat`:
task-clock: 83373 ms --> 43800 ms (50% faster)
cycles: 221,633,461,676 --> 116,307,209,986 (47% fewer)
instructions: 149,299,179,939 --> 122,998,800,184 (18% fewer)
Helped-by: Ramsay Jones (format string fix in "die" message)
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/no-cherry-pick-head-after-punted:
cherry-pick: do not give irrelevant advice when cherry-pick punted
revert.c: defer writing CHERRY_PICK_HEAD till it is safe to do so
This removes the need to call this function recursively, shinking the
code size slightly and netting a small performance increase.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is done in some of the new pack layout code introduced in commit
1b4bb16b9e. This more closely matches the nr_objects global that is
unsigned that these variables are based off of and bounded by.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This function is a whole 26 bytes when compiled on x86_64, but is
currently invoked over 1.037 billion times when running pack-objects on
the Linux kernel git repository. This is hitting the point where
micro-optimizations do make a difference, and inlining it only increases
the object file size by 38 bytes.
As reported by perf, this dropped task-clock from 84183 to 83373 ms, and
total cycles from 223.5 billion to 221.6 billion. Not astronomical, but
worth getting for adding one word.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If --tags is specified, add that refspec to the list given to
prune_refs so it knows to treat it as a filter on what refs to
should consider for prunning. This way
git fetch --prune --tags origin
only prunes tags and doesn't delete the branch refs.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the user gave us refspecs on the command line, we should use those
when deciding whether to prune a ref instead of relying on the
refspecs in the config.
Previously, running
git fetch --prune origin refs/heads/master:refs/remotes/origin/master
would delete every other ref under the origin namespace because we
were using the refspec to filter the available refs but using the
configured refspec to figure out if a ref had been deleted on the
remote. This is clearly the wrong thing to do.
Change prune_refs and get_stale_heads to simply accept a list of
references and a list of refspecs. The caller of either function needs
to decide what refspecs should be used to decide whether a ref is
stale.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These can happen if another process simultaneously prunes a
pack. But that is not usually an error condition, because a
properly-running prune should have repacked the object into
a new pack. So we will notice that the pack has disappeared
unexpectedly, print a message, try other packs (possibly
after re-scanning the list of packs), and find it in the new
pack.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It's possible that while pack-objects is running, a
simultaneously running prune process might delete a pack
that we are interested in. Because we load the pack indices
early on, we know that the pack contains our item, but by
the time we try to open and map it, it is gone.
Since c715f78, we already protect against this in the normal
object access code path, but pack-objects accesses the packs
at a lower level. In the normal access path, we call
find_pack_entry, which will call find_pack_entry_one on each
pack index, which does the actual lookup. If it gets a hit,
we will actually open and verify the validity of the
matching packfile (using c715f78's is_pack_valid). If we
can't open it, we'll issue a warning and pretend that we
didn't find it, causing us to go on to the next pack (or on
to loose objects).
Furthermore, we will cache the descriptor to the opened
packfile. Which means that later, when we actually try to
access the object, we are likely to still have that packfile
opened, and won't care if it has been unlinked from the
filesystem.
Notice the "likely" above. If there is another pack access
in the interim, and we run out of descriptors, we could
close the pack. And then a later attempt to access the
closed pack could fail (we'll try to re-open it, of course,
but it may have been deleted). In practice, this doesn't
happen because we tend to look up items and then access them
immediately.
Pack-objects does not follow this code path. Instead, it
accesses the packs at a much lower level, using
find_pack_entry_one directly. This means we skip the
is_pack_valid check, and may end up with the name of a
packfile, but no open descriptor.
We can add the same is_pack_valid check here. Unfortunately,
the access patterns of pack-objects are not quite as nice
for keeping lookup and object access together. We look up
each object as we find out about it, and the only later when
writing the packfile do we necessarily access it. Which
means that the opened packfile may be closed in the interim.
In practice, however, adding this check still has value, for
three reasons.
1. If you have a reasonable number of packs and/or a
reasonable file descriptor limit, you can keep all of
your packs open simultaneously. If this is the case,
then the race is impossible to trigger.
2. Even if you can't keep all packs open at once, you
may end up keeping the deleted one open (i.e., you may
get lucky).
3. The race window is shortened. You may notice early that
the pack is gone, and not try to access it. Triggering
the problem without this check means deleting the pack
any time after we read the list of index files, but
before we access the looked-up objects. Triggering it
with this check means deleting the pack means deleting
the pack after we do a lookup (and successfully access
the packfile), but before we access the object. Which
is a smaller window.
Acked-by: Nicolas Pitre <nico@fluxnic.net>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* rs/pending:
commit: factor out clear_commit_marks_for_object_array
checkout: use leak_pending flag
bundle: use leak_pending flag
bisect: use leak_pending flag
revision: add leak_pending flag
checkout: use add_pending_{object,sha1} in orphan check
revision: factor out add_pending_sha1
checkout: check for "Previous HEAD" notice in t2020
Conflicts:
builtin/checkout.c
revision.c
* nd/maint-autofix-tag-in-head:
Accept tags in HEAD or MERGE_HEAD
merge: remove global variable head[]
merge: use return value of resolve_ref() to determine if HEAD is invalid
merge: keep stash[] a local variable
Conflicts:
builtin/merge.c
Implemented internally instead of as "git merge --no-commit && git commit"
so that "merge --edit" is otherwise consistent (hooks, etc) with "merge".
Note: the edit message does not include the status information that one
gets with "commit --status" and it is cleaned up after editing like one
gets with "commit --cleanup=default". A later patch could add the status
information if desired.
Note: previously we were not calling stripspace() after running the
prepare-commit-msg hook. Now we are, stripping comments and
leading/trailing whitespace lines if --edit is given, otherwise only
stripping leading/trailing whitespace lines if not given --edit.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
I noticed this when "git am CORRUPTED" unexpectedly failed with an
odd diagnostic, and even removed one of the files it was supposed
to have patched.
Reproduce with any valid old/new patch from which you have removed
the "+++ b/FILE" line. You'll see a diagnostic like this
fatal: unable to write file '(null)' mode 100644: Bad address
and you'll find that FILE has been removed.
The above is on glibc-based systems. On other systems, rather than
getting "null", you may provoke a segfault as git tries to
dereference the NULL file name.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mh/check-ref-format-3: (23 commits)
add_ref(): verify that the refname is formatted correctly
resolve_ref(): expand documentation
resolve_ref(): also treat a too-long SHA1 as invalid
resolve_ref(): emit warnings for improperly-formatted references
resolve_ref(): verify that the input refname has the right format
remote: avoid passing NULL to read_ref()
remote: use xstrdup() instead of strdup()
resolve_ref(): do not follow incorrectly-formatted symbolic refs
resolve_ref(): extract a function get_packed_ref()
resolve_ref(): turn buffer into a proper string as soon as possible
resolve_ref(): only follow a symlink that contains a valid, normalized refname
resolve_ref(): use prefixcmp()
resolve_ref(): explicitly fail if a symlink is not readable
Change check_refname_format() to reject unnormalized refnames
Inline function refname_format_print()
Make collapse_slashes() allocate memory for its result
Do not allow ".lock" at the end of any refname component
Refactor check_refname_format()
Change check_ref_format() to take a flags argument
Change bad_ref_char() to return a boolean value
...
* mz/remote-rename:
remote: only update remote-tracking branch if updating refspec
remote rename: warn when refspec was not updated
remote: "rename o foo" should not rename ref "origin/bar"
remote: write correct fetch spec when renaming remote 'remote'
* cb/common-prefix-unification:
rename pathspec_prefix() to common_prefix() and move to dir.[ch]
consolidate pathspec_prefix and common_prefix
remove prefix argument from pathspec_prefix
The previous logic in show_config was to print the delimiter when the
value was set, but Boolean variables have an implicit value "true" when
they appear with no value in the config file. As a result, we got:
git_Config --get-regexp '.*\.Boolean' #1. Ok: example.boolean
git_Config --bool --get-regexp '.*\.Boolean' #2. NO: example.booleantrue
Fix this by defering the display of the separator until after the value
to display has been computed.
Reported-by: Brian Foster <brian.foster@maxim-ic.com>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In particular, gcc complains as follows:
CC tree-walk.o
tree-walk.c: In function `traverse_trees':
tree-walk.c:347: warning: 'e' might be used uninitialized in this \
function
CC builtin/revert.o
builtin/revert.c: In function `verify_opt_mutually_compatible':
builtin/revert.c:113: warning: 'opt2' might be used uninitialized in \
this function
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Close FETCH_HEAD and release the string url even if we have to leave the
function store_updated_refs() early.
Reported-by: Chris Wilson <cwilson@vigilantsw.com>
Helped-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Tay Ray Chuan <rctay89@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "merge --log" and fmt-merge-msg to use branch description
information when merging a local topic branch into the mainline. The
description goes between the branch name label and the list of commit
titles.
The refactoring to share the common configuration parsing between
merge and fmt-merge-msg needs to be made into a separate patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* js/maint-no-cherry-pick-head-after-punted:
cherry-pick: do not give irrelevant advice when cherry-pick punted
revert.c: defer writing CHERRY_PICK_HEAD till it is safe to do so
Conflicts:
builtin/revert.c
If a cherry-pick did not even start because the working tree had local
changes that would overlap with the operation, we shouldn't be advising
the users to resolve conflicts nor to conclude it with "git commit".
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
do_pick_commit() writes out CHERRY_PICK_HEAD before invoking merge (either
via do_recursive_merge() or try_merge_command()) on the assumption that if
the merge fails it is due to conflict. However, if the tree is dirty, the
merge may not even start, aborting before do_pick_commit() can remove
CHERRY_PICK_HEAD.
Instead, defer writing CHERRY_PICK_HEAD till after merge has returned.
At this point we know the merge has either succeeded or failed due
to conflict. In either case, we want CHERRY_PICK_HEAD to be written
so that it may be picked up by the subsequent invocation of commit.
Note that do_recursive_merge() aborts if the merge cannot start, while
try_merge_command() returns a non-zero value other than 1.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This code calls git_config from a helper function to parse the config entry
it is interested in. Calling git_config in this way may cause a problem if
the helper function can be called after a previous call to git_config by
another function since the second call to git_config may reset some
variable to the value in the config file which was previously overridden.
The above is not a problem in this case since the function passed to
git_config only parses one config entry and the variable it sets is not
assigned outside of the parsing function. But a programmer who desires
all of the standard config options to be parsed may be tempted to modify
git_attr_config() so that it falls back to git_default_config() and then it
_would_ be vulnerable to the above described behavior.
So, move the call to git_config up into the top-level cmd_* function and
move the responsibility for parsing core.attributesfile into the main
config file parser.
Which is only the logical thing to do ;-)
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "it" string would not be free'ed if base_name was non-NULL.
Let's free it.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "x"-prefixed versions of strdup, malloc, etc. will check whether the
allocation was successful and terminate the process otherwise.
A few uses of malloc were left alone since they already implemented a
graceful path of failure or were in a quasi external library like xdiff.
Additionally, the call to malloc in compat/win32/syslog.c was not modified
since the syslog() implemented there is a die handler and a call to the
x-wrappers within a die handler could result in recursion should memory
allocation fail. This will have to be addressed separately.
Signed-off-by: Brandon Casey <drafnel@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Using branch.$name.description as the configuration key, give users a
place to write about what the purpose of the branch is and things like
that, so that various subsystems, e.g. "push -s", "request-pull", and
"format-patch --cover-letter", can later be taught to use this
information.
The "-m" option similar to "commit/tag" is deliberately omitted, as the
whole point of branch description is about giving descriptive information
(the name of the branch itself is a better place for information that fits
on a single-line).
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use the description for the branch when preparing the cover letter
when available.
While at it, mark a loosely written codepath that would do a random and
useless thing given an unusual input (e.g. "^master HEAD HEAD^"), which
we may want to fix someday.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since much of the infrastructure does not work correctly with
unnormalized refnames, change check_refname_format() to reject them.
Similarly, change "git check-ref-format" to reject unnormalized
refnames by default. But add an option --normalize, which causes "git
check-ref-format" to normalize the refname before checking its format,
and print the normalized refname. This is exactly the behavior of the
old --print option, which is retained but deprecated.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Soon we will make printing independent of collapsing.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This will make upcoming changes a tiny bit easier.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change check_ref_format() to take a flags argument that indicates what
is acceptable in the reference name (analogous to "git
check-ref-format"'s "--allow-onelevel" and "--refspec-pattern"). This
is more convenient for callers and also fixes a failure in the test
suite (and likely elsewhere in the code) by enabling "onelevel" and
"refspec-pattern" to be allowed independently of each other.
Also rename check_ref_format() to check_refname_format() to make it
obvious that it deals with refnames rather than references themselves.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add tests of the new options. (Actually, one big reason to add
the new options is to make it easy to test check_ref_format(), though
the options should also be useful to other scripts.)
Interpret the result of check_ref_format() based on which types of
refnames are allowed. However, because check_ref_format() can only
return a single value, one test case is still broken. Specifically,
the case "git check-ref-format --onelevel '*'" incorrectly succeeds
because check_ref_format() returns CHECK_REF_FORMAT_ONELEVEL for this
refname even though the refname is also CHECK_REF_FORMAT_WILDCARD.
The type of check that leads to this failure is used elsewhere in
"real" code and could lead to bugs; it will be fixed over the next few
commits.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/argv-array:
run_hook: use argv_array API
checkout: use argv_array API
bisect: use argv_array API
quote: provide sq_dequote_to_argv_array
refactor argv_array into generic code
quote.h: fix bogus comment
add sha1_array API docs
* mg/branch-list:
t3200: clean up checks for file existence
branch: -v does not automatically imply --list
branch: allow pattern arguments
branch: introduce --list option
git-branch: introduce missing long forms for the options
git-tag: introduce long forms for the options
t6040: test branch -vv
Conflicts:
Documentation/git-tag.txt
t/t3200-branch.sh
* jk/for-each-ref:
for-each-ref: add split message parts to %(contents:*).
for-each-ref: handle multiline subjects like --pretty
for-each-ref: refactor subject and body placeholder parsing
t6300: add more body-parsing tests
t7004: factor out gpg setup
* jc/receive-verify:
receive-pack: check connectivity before concluding "git push"
check_everything_connected(): libify
check_everything_connected(): refactor to use an iterator
fetch: verify we have everything we need before updating our ref
Conflicts:
builtin/fetch.c
* jc/fetch-verify:
fetch: verify we have everything we need before updating our ref
rev-list --verify-object
list-objects: pass callback data to show_objects()
* rr/revert-cherry-pick-continue:
builtin/revert.c: make commit_list_append() static
revert: Propagate errors upwards from do_pick_commit
revert: Introduce --continue to continue the operation
revert: Don't implicitly stomp pending sequencer operation
revert: Remove sequencer state when no commits are pending
reset: Make reset remove the sequencer state
revert: Introduce --reset to remove sequencer state
revert: Make pick_commits functionally act on a commit list
revert: Save command-line options for continuing operation
revert: Save data for continuing after conflict resolution
revert: Don't create invalid replay_opts in parse_args
revert: Separate cmdline parsing from functional code
revert: Introduce struct to keep command-line options
revert: Eliminate global "commit" variable
revert: Rename no_replay to record_origin
revert: Don't check lone argument in get_encoding
revert: Simplify and inline add_message_to_msg
config: Introduce functions to write non-standard file
advice: Introduce error_resolve_conflict
Make ERR as first packet of remote snapshot reply work like it does in
fetch/push. Lets servers decline remote snapshot with message the same
way as declining fetch/push with a message.
Signed-off-by: Ilari Liusvaara <ilari.liusvaara@elisanet.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jc/maint-grep-untracked-exclude:
grep: teach --untracked and --exclude-standard options
grep --no-index: don't use git standard exclusions
grep: do not use --index in the short usage output
Conflicts:
Documentation/git-grep.txt
builtin/grep.c
Give each mode of operation (all, from stdin, given commits) its own usage
line to make it easier to see that they are mutually exclusive.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Factor out the code to clear the commit marks for a whole struct
object_array from builtin/checkout.c into its own exported function
clear_commit_marks_for_object_array and use it in bisect and bundle
as well. It handles tags and commits and ignores objects of any
other type.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of going through all the references again when we clear the
commit marks, do it like bisect and bundle and gain ownership of the
list of pending objects which we constructed from those references.
We simply copy the struct object_array that points to the list, set
the flag leak_pending and then prepare_revision_walk won't destroy
it and it's ours. We use it to clear the marks and free it at the
end.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of building a list of textual arguments for setup_revisions, use
add_pending_object and add_pending_sha1 to queue the objects directly.
This is both faster and simpler.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a push specifies deletion of non-existent refs, the post post-receive and
post-update hooks receive them as input/arguments.
For instance, for the following push, where refs/heads/nonexistent is a ref
which does not exist on the remote side:
git push origin :refs/heads/nonexistent
the post-receive hook receives from standard input:
<null-sha1> SP <null-sha1> SP refs/heads/nonexistent
and the post-update hook receives as arguments:
refs/heads/nonexistent
which does not make sense since it is a no-op.
Teach receive-pack not to pass non-existent refs to the post-receive and
post-update hooks. If the push only attempts to delete non-existent refs,
these hooks are not even called.
The update and pre-receive hooks are still notified about attempted
deletion of non-existent refs to give them a chance to inspect the
situation and act on it.
[jc: mild fix-ups to avoid introducing an extra list; also added fixes to
some tests]
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Checking paths out of a tree is (currently) defined to do:
- Grab the paths from the named tree that match the given pathspec,
and add them to the index;
- Check out the contents from the index for paths that match the
pathspec to the working tree; and while at it
- If the given pathspec did not match anything, suspect a typo from the
command line and error out without updating the index nor the working
tree.
Suppose that the branch you are working on has dir/myfile, and the "other"
branch has dir/other but not dir/myfile. Further imagine that you have
either modified or removed dir/myfile in your working tree, but you have
not run "git add dir/myfile" or "git rm dir/myfile" to tell Git about your
local change. Running
$ git checkout other dir
would add dir/other to the index with the contents taken out of the
"other" branch, and check out the paths from the index that match the
pathspec "dir", namely, "dir/other" and "dir/myfile", overwriting your
local changes to "dir/myfile", even though "other" branch does not even
know about that file.
Fix it by updating the working tree only with the index entries that
was read from the "other" tree.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When running git describe --dirty the index should be refreshed. Previously
the cached index would cause describe to think that the index was dirty when,
in reality, it was just stale.
The issue was exposed by python setuptools which hardlinks files into another
directory when building a distribution.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This option causes check-attr to consider .gitattributes only from
the index, ignoring .gitattributes from the working tree. This allows
the command to be used in situations where a working tree does not exist.
Signed-off-by: Jay Soffian <jaysoffian@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
get_one_patchid() uses a rather dumb heuristic to determine if the
passed buffer is part of the next commit. Whenever the first 40 bytes
are a valid hexadecimal sha1 representation, get_one_patchid() returns
next_sha1.
Once the current line is longer than the fixed buffer, this will break
(provided the additional bytes make a valid hexadecimal sha1). As a result
patch-id returns incorrect results. Instead, use strbuf and read one line
at a time.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Michael Schubert <mschub@elegosoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With the usual "git" transport, a large-ish transfer with "git fetch" and
"git pull" give progress eye-candy to avoid boring users. However, not
when they are reading from a bundle. I.e.
$ git pull ../git-bundle.bndl master
This teaches bundle.c:unbundle() to give "-v" option to index-pack and
tell it to give progress bar when transport decides it is necessary.
The operation in the other direction, "git bundle create", could also
learn to honor --quiet but that is a separate issue.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
HEAD and MERGE_HEAD (among other branch tips) should never hold a
tag. That can only be caused by broken tools and is cumbersome to fix
by an end user with:
$ git update-ref HEAD $(git rev-parse HEAD^{commit})
which may look like a magic to a new person.
Be easy, warn users (so broken tools can be fixed if they bother to
report) and move on.
Be robust, if the given SHA-1 cannot be resolved to a commit object,
die (therefore return value is always valid).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also kill head_invalid in favor of "head_commit == NULL".
Local variable "head" in cmd_merge() is renamed to "head_sha1" to make
sure I don't miss any access because this variable should not be used
after head_commit is set (use head_commit->object.sha1 instead).
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
resolve_ref() only updates "head" when it returns non NULL value (it
may update "head" even when returning NULL, but not in all cases).
Because "head" is not initialized before the call, is_null_sha1() is
not enough. Check also resolve_ref() return value.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git branch" command, while not in listing mode, calls create_branch()
even when the target branch already exists, and it does so even when it is
not interested in updating the value of the branch (i.e. the name of the
commit object that sits at the tip of the existing branch). This happens
when the command is run with "--set-upstream" option.
The earlier safety-measure to prevent "git branch -f $branch $commit" from
updating the currently checked out branch did not take it into account,
and we no longer can update the tracking information of the current branch.
Minimally fix this regression by telling the validation code if it is
called to really update the value of a potentially existing branch, or if
the caller merely is interested in updating auxiliary aspects of a branch.
Reported-and-Tested-by: Jay Soffian
Signed-off-by: Junio C Hamano <gitster@pobox.com>
What should happen if you run this command?
$ git ls-remote -h
It does not give a short-help for the command. Instead because "-h" is a
synonym for "--heads", it runs "git ls-remote --heads", and because there
is no remote specified on the command line, we run it against the default
"origin" remote, hence end up doing the same as
$ git ls-remote --heads origin
Fix this counter-intuitive behaviour by special casing a lone "-h" that
does not have anything else on the command line and calling usage().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It probably is not such a good idea to use ":/<pattern>" to specify which
commit to merge, as ":/<pattern>" can often hit unexpected commits, but
somebody tried it and got a nonsense error message:
fatal: ':/Foo bar' does not point to a commit
So here is a for-the-sake-of-consistency update that is fairly useless
that allows users to carefully try not shooting in the foot.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We were using a similar ad-hoc rev_list_args structure, but
this saves some code.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Yes, there is a warning that says the function is only used by push in big
red letters in front of this function, but it didn't say a more important
thing it should have said: what the function is for and what it does.
Rename it and document it to avoid future confusion.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Running a hook has to make complex set-up to establish web of
communication between child process and multiplexer, which is common
regardless of what kind of data is fed to the hook. Refactor the parts
that is specific to the data fed to the particular set of hooks from the
part that runs the hook, so that the code can be reused to drive hooks
that take different kind of data.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The message identifies the process as receive-pack when it cannot fork the
sideband demultiplexer. We are actually a send-pack.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also make common_prefix_len() static as this refactoring makes dir.c
itself the only caller of this helper function.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
commit c9bfb953 (want_color: automatically fallback to color.ui,
2011-08-17) introduced a regression where format-patch produces colorized
patches when color.ui is set to "always".
In f3aafa4 (Disable color detection during format-patch, 2006-07-09),
git_format_config was taught to intercept diff.color to avoid passing it
down to git_log_config and later, git_diff_ui_config.
Teach git_format_config to intercept color.ui in the same way.
Helped-by: Jeff King <peff@peff.net>
Signed-off-by: Pang Yan Han <pangyanhan@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git remote rename' will only update the remote's fetch refspec if it
looks like a default one. If the remote has no default fetch refspec,
as in
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = +refs/heads/*:refs/remotes/upstream/*
we would not update the fetch refspec and even if there is a ref
called "refs/remotes/origin/master", we should not rename it, since it
was not created by fetching from the remote.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a remote, we also try to update the fetch refspec
accordingly, but only if it has the default format. For others, such
as refs/heads/master:refs/heads/origin, we are conservative and leave
it untouched. Let's give the user a warning about refspecs that are
not updated, so he can manually update the config if necessary.
Suggested-by: Jeff King <peff@peff.net>
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a remote called 'o' using 'git remote rename o foo', git
should also rename any remote-tracking branches for the remote. This
does happen, but any remote-tracking branches starting with
'refs/remotes/o', such as 'refs/remotes/origin/bar', will also be
renamed (to 'refs/remotes/foorigin/bar' in this case).
Fix it by simply matching one more character, up to the slash
following the remote name.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When renaming a remote whose name is contained in a configured fetch
refspec for that remote, we currently replace the first occurrence of
the remote name in the refspec. This is correct in most cases, but
breaks if the remote name occurs in the fetch refspec before the
expected place. For example, we currently change
[remote "remote"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = +refs/heads/*:refs/remotes/remote/*
into
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = +refs/heads/*:refs/origins/remote/*
Reduce the risk of changing incorrect sections of the refspec by
matching the entire ":refs/remotes/<name>/" instead of just "<name>".
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Asking fwrite() to write one item of size bytes results in fwrite()
reporting "I wrote zero item", when size is zero. Instead, we could
ask it to write "size" items of 1 byte and expect it to report that
"I wrote size items" when it succeeds, with any value of size,
including zero.
Noticed and reported by BJ Hargrave.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Extract the helper function and the type definition of the iterator
function it uses out of builtin/fetch.c into a separate source and a
header file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We will be using the same "rev-list --verify-objects" logic to add a
sanity check to the receiving end of "git push" in the same way, but the
list of commits that are checked come from a structure with a different
shape over there.
Update the function to take an iterator to make it easier to reuse it in
different contexts.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git fetch" command works in two phases. The remote side tells us what
objects are at the tip of the refs we are fetching from, and transfers the
objects missing from our side. After storing the objects in our repository,
we update our remote tracking branches to point at the updated tips of the
refs.
A broken or malicious remote side could send a perfectly well-formed pack
data during the object transfer phase, but there is no guarantee that the
given data actually fill the gap between the objects we originally had and
the refs we are updating to.
Although this kind of breakage can be caught by running fsck after a
fetch, it is much cheaper to verify that everything that is reachable from
the tips of the refs we fetched are indeed fully connected to the tips of
our current set of refs before we update them.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
