These were found using gcc 4.3.2-1ubuntu11 with the warning:
warning: format not a string literal and no format arguments
Incorporated suggestions from Brandon Casey <casey@nrlssc.navy.mil>.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This had two problems with symrefs. First, it copied the actual sha1
instead of the "pointer", second it failed to remove the old ref after a
successful rename.
Given that till now delete_ref() always dereferenced symrefs, a new
parameters has been introduced to delete_ref() to allow deleting refs
without a dereference.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git remote show' substituted the remote name into a string that was later
used as a printf format string. If a remote name contains a printf format
specifier like this:
$ git remote add foo%sbar .
then the command
$ git remote show foo%sbar
would print garbage (if you are lucky) or crash. This fixes it.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch makes "git remote -v" and "git remote show" report multiple URLs
rather than warn about them. Multiple URLs are OK for pushing into
multiple repos simultaneously. Without "-v" each repo is shown once only.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The command line
$ git clone --mirror $URL
is now a short-hand for
$ git clone --bare $URL
$ (cd $(basename $URL) && git remote add --mirror origin $URL)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name path_list was correct for the first usage of that data structure,
but it really is a general-purpose string list.
$ perl -i -pe 's/path-list/string-list/g' $(git grep -l path-list)
$ perl -i -pe 's/path_list/string_list/g' $(git grep -l path_list)
$ git mv path-list.h string-list.h
$ git mv path-list.c string-list.c
$ perl -i -pe 's/has_path/has_string/g' $(git grep -l has_path)
$ perl -i -pe 's/path/string/g' string-list.[ch]
$ git mv Documentation/technical/api-path-list.txt \
Documentation/technical/api-string-list.txt
$ perl -i -pe 's/strdup_paths/strdup_strings/g' $(git grep -l strdup_paths)
... and then fix all users of string-list to access the member "string"
instead of "path".
Documentation/technical/api-string-list.txt needed some rewrapping, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The original code relied on an insane definition of skip_prefix() that
returned an empty string for a NULL input and returned the original if the
given "prefix" is not a prefix at all (it would have been justifiable if
it were called "come_up_with_a_short_name_to_report_ref()" or something,
though). In any case, when we replaced it with a more saner definition of
the function whose behaviour is true to its name, its callers needed to be
adjusted but the conversion missed one call site.
This introduces a helper function "abbrev_ref()" whose purpose is to get a
full refname and its possible prefix and to strip the prefix part if it
matches, or refname itself in full if it doesn't. This makes the callers
easier to read again.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
builtin-remote.c and parse-options.c both have a skip_prefix() function,
for the same purpose. Move parse-options's one to git-compat-util.h and
let builtin-remote use it as well.
Signed-off-by: Miklos Vajna <vmiklos@frugalware.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit made it always say "Pruning $remote" but reported the
URL only when there is something to prune. Make it consistent by not
saying anything at all when there is nothing to prune.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This command is really too quiet which make it unconfortable to use.
Also implement a --dry-run option, in place of the original -n one, to
list stale tracking branches that will be pruned, but do not actually
prune them.
Add a test case for --dry-run.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allow us to add different features to each of them and keep the
code simple at the same time. Also create a get_remote_ref_states()
to avoid duplicated code.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The perl version accepted a -n flag, to show local informations only
without querying remote heads, that seems to have been lost in the C
revrite.
This restores the older behaviour and add a test case.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A remote may be configured to fetch into tracking branches that
don't match its name. A user may have created a remote by hand
that will fetch to a different tracking branch namespace:
[remote "alt"]
url = git://repo.or.cz/alt-git.git
fetch = refs/heads/*:refs/remotes/origin/*
When deleting remote alt we should clean up the refs whose names
start with "refs/remotes/origin/", even though the remote itself
was named alt by the user.
To avoid deleting refs used by another remote we only clear refs
that are unique to this remote. This prevents `git prune rm alt`
from removing the refs used by say origin if alt was just using a
different URL for the same repository.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A remote may be configured to fetch into tracking branches that
do not match the remote name. For example a user may have created
extra remotes that will fetch to the same tracking branch namespace,
but from different URLs:
[remote "origin"]
url = git://git.kernel.org/pub/scm/git/git.git
fetch = refs/heads/*:refs/remotes/origin/*
[remote "alt"]
url = git://repo.or.cz/alt-git.git
fetch = refs/heads/*:refs/remotes/origin/*
When running `git remote prune alt` we expect stale branches to
be removed from "refs/remotes/origin/*" and not from the unused
namespace of "refs/remotes/alt/*".
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Not sure when this became unused, but no code references it,
other than to populate the strbuf with an initial value.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
remote: create fetch config lines with '+'
push: allow unqualified dest refspecs to DWIM
doc/git-gc: add a note about what is collected
t5516: remove ambiguity test (1)
Linked glossary from cvs-migration page
write-tree: properly detect failure to write tree objects
Since git-remote always uses remote tracking branches, it
should be safe to always force updates of those branches.
I.e., we should generate
fetch = +refs/heads/*:refs/remotes/$remote/*
instead of
fetch = refs/heads/*:refs/remotes/$remote/*
This was the behavior of the perl version, which seems to
have been lost in the C rewrite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch adds a remote.*.mirror configuration option that,
when set, automatically puts git-push in --mirror mode for that
remote.
Furthermore, the option is set automatically by `git remote
add --mirror'.
The code in remote.c to parse remote.*.skipdefaultupdate
had a subtle problem: a comment in the code indicated that
special care was needed for boolean options, but this care was
not used in parsing the option. Since I was touching related
code, I did this fix too.
[jc: and I further fixed up the "ignore boolean" code.]
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can happen if the arguments to git-remote add is switched by the
user, and git would only show an error if fetching was also requested.
Fix it by using the refspec parsing engine to check if the requested
name can be parsed as a remote before add it.
Also cleanup so that the "remote.<name>.url" config name buffer is only
initialized once.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Many other commands use the "no arguments" form to show a
list (e.g., git-branch, git-tag). While we did show all
remotes for just "git remote", we displayed a usage error
for "git remote show" with no arguments. This is
counterintuitive, since by giving it _more_ information, we
get _less_ result.
The usage model can now be thought of as:
- "git remote show <remote>": show a remote
- "git remote show": show all remotes
- "git remote": assume "show"; i.e., shorthand for "git remote show"
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without this the output of 'git remote show' does not end with a new-line:
bash> git remote show repo
* remote repo
URL: repo.or.cz:/srv/git/kdbg.git
Tracked remote branches
maint master mob
Local branch pushed with 'git push'
+master:masterbash>
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For symbolic refs, a sane notion of being "stale" is that the ref
they point to no longer exists. Since this is checked already,
"remote show" does not need to show them at all.
Incidentally, this fixes the issue that "HEAD" was shown as a
stale ref by "remote show" in a freshly cloned repository.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the other end has dangling symref, "git fetch" issues an error
message but that is not grave enough to cause the fetch process to fail.
As the result, the user will see something like this:
$ git remote update
error: refs/heads/2.0-uobjects points nowhere!
"remote update" used to report which remote it is fetching from, like
this:
$ git remote update
Updating core
Updating matthieu
error: refs/heads/2.0-uobjects points nowhere!
Updating origin
This reinstates the message "Updating <name>" in "git remote update".
Signed-off-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git remote add" can add a symbolic ref "HEAD", and "rm" should delete
it, too.
Noticed by Teemu Likonen.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The rewrite in C inadvertently broke updating with remote groups: when you
pass parameters to "git remote update", it used to look up "remotes.<group>"
for every parameter, and interpret the value as a list of remotes to update.
Also, no parameter, or a single parameter "default" should update all
remotes that have not been marked with "skipDefaultUpdate".
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Like in ls-remote, we have to disconnect the transport after getting
the remote refs.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This adds special handling for mirror remotes.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
