This should be part of every program, as otherwise users do
not get translated error messages. However, some external
commands forgot to do so (e.g., git-credential-store). This
fixes them, and eliminates the repeated code in programs
that did remember to use it.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Every program which links against libgit.a must call this
function, or risk hitting an assert() in system_path() that
checks whether we have configured argv0_path (though only
when RUNTIME_PREFIX is defined, so essentially only on
Windows).
Looking at the diff, you can see that putting it into the
common main() saves us having to do it individually in each
of the external commands. But what you can't see are the
cases where we _should_ have been doing so, but weren't
(e.g., git-credential-store, and all of the t/helper test
programs).
This has been an accident-waiting-to-happen for a long time,
but wasn't triggered until recently because it involves one
of those programs actually calling system_path(). That
happened with git-credential-store in v2.8.0 with ae5f677
(lazily load core.sharedrepository, 2016-03-11). The
program:
- takes a lock file, which...
- opens a tempfile, which...
- calls adjust_shared_perm to fix permissions, which...
- lazy-loads the config (as of ae5f677), which...
- calls system_path() to find the location of
/etc/gitconfig
On systems with RUNTIME_PREFIX, this means credential-store
reliably hits that assert() and cannot be used.
We never noticed in the test suite, because we set
GIT_CONFIG_NOSYSTEM there, which skips the system_path()
lookup entirely. But if we were to tweak git_config() to
find /etc/gitconfig even when we aren't going to open it,
then the test suite shows multiple failures (for
credential-store, and for some other test helpers). I didn't
include that tweak here because it's way too specific to
this particular call to be worth carrying around what is
essentially dead code.
The implementation is fairly straightforward, with one
exception: there is exactly one caller (git.c) that actually
cares about the result of the function, and not the
side-effect of setting up argv0_path. We can accommodate
that by simply replacing the value of argv[0] in the array
we hand down to cmd_main().
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are certain startup tasks that we expect every git
process to do. In some cases this is just to improve the
quality of the program (e.g., setting up gettext()). In
others it is a requirement for using certain functions in
libgit.a (e.g., system_path() expects that you have called
git_extract_argv0_path()).
Most commands are builtins and are covered by the git.c
version of main(). However, there are still a few external
commands that use their own main(). Each of these has to
remember to include the correct startup sequence, and we are
not always consistent.
Rather than just fix the inconsistencies, let's make this
harder to get wrong by providing a common main() that can
run this standard startup.
We basically have two options to do this:
- the compat/mingw.h file already does something like this by
adding a #define that replaces the definition of main with a
wrapper that calls mingw_startup().
The upside is that the code in each program doesn't need
to be changed at all; it's rewritten on the fly by the
preprocessor.
The downside is that it may make debugging of the startup
sequence a bit more confusing, as the preprocessor is
quietly inserting new code.
- the builtin functions are all of the form cmd_foo(),
and git.c's main() calls them.
This is much more explicit, which may make things more
obvious to somebody reading the code. It's also more
flexible (because of course we have to figure out _which_
cmd_foo() to call).
The downside is that each of the builtins must define
cmd_foo(), instead of just main().
This patch chooses the latter option, preferring the more
explicit approach, even though it is more invasive. We
introduce a new file common-main.c, with the "real" main. It
expects to call cmd_main() from whatever other objects it is
linked against.
We link common-main.o against anything that links against
libgit.a, since we know that such programs will need to do
this setup. Note that common-main.o can't actually go inside
libgit.a, as the linker would not pick up its main()
function automatically (it has no callers).
The rest of the patch is just adjusting all of the various
external programs (mostly in t/helper) to use cmd_main().
I've provided a global declaration for cmd_main(), which
means that all of the programs also need to match its
signature. In particular, many functions need to switch to
"const char **" instead of "char **" for argv. This effect
ripples out to a few other variables and functions, as well.
This makes the patch even more invasive, but the end result
is much better. We should be treating argv strings as const
anyway, and now all programs conform to the same signature
(which also matches the way builtins are defined).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fast-import --export-marks" would overwrite the existing marks
file even when it makes a dump from its custom die routine.
Prevent it from doing so when we have an import-marks file but
haven't finished reading it.
* fc/fast-import-broken-marks-file:
fast-import: do not truncate exported marks file
The experimental "multiple worktree" feature gains more safety to
forbid operations on a branch that is checked out or being actively
worked on elsewhere, by noticing that e.g. it is being rebased.
* nd/worktree-various-heads:
branch: do not rename a branch under bisect or rebase
worktree.c: check whether branch is bisected in another worktree
wt-status.c: split bisect detection out of wt_status_get_state()
worktree.c: check whether branch is rebased in another worktree
worktree.c: avoid referencing to worktrees[i] multiple times
wt-status.c: make wt_status_check_rebase() work on any worktree
wt-status.c: split rebase detection out of wt_status_get_state()
path.c: refactor and add worktree_git_path()
worktree.c: mark current worktree
worktree.c: make find_shared_symref() return struct worktree *
worktree.c: store "id" instead of "git_dir"
path.c: add git_common_path() and strbuf_git_common_path()
dir.c: rename str(n)cmp_icase to fspath(n)cmp
Certain lines of the marks file might be corrupted (or the objects
missing due to a garbage collection), but that's no reason to truncate
the file and essentially destroy the rest of it.
Ideally missing objects should not cause a crash, we could just skip
them, but that's another patch.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These functions compare two paths that are taken from file system.
Depending on the running file system, paths may need to be compared
case-sensitively or not, and maybe even something else in future. The
current names do not convey that well.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Update various codepaths to avoid manually-counted malloc().
* jk/tighten-alloc: (22 commits)
ewah: convert to REALLOC_ARRAY, etc
convert ewah/bitmap code to use xmalloc
diff_populate_gitlink: use a strbuf
transport_anonymize_url: use xstrfmt
git-compat-util: drop mempcpy compat code
sequencer: simplify memory allocation of get_message
test-path-utils: fix normalize_path_copy output buffer size
fetch-pack: simplify add_sought_entry
fast-import: simplify allocation in start_packfile
write_untracked_extension: use FLEX_ALLOC helper
prepare_{git,shell}_cmd: use argv_array
use st_add and st_mult for allocation size computation
convert trivial cases to FLEX_ARRAY macros
use xmallocz to avoid size arithmetic
convert trivial cases to ALLOC_ARRAY
convert manual allocations to argv_array
argv-array: add detach function
add helpers for allocating flex-array structs
harden REALLOC_ARRAY and xcalloc against size_t overflow
tree-diff: catch integer overflow in combine_diff_path allocation
...
This function allocate a packed_git flex-array, and adds a
mysterious 2 bytes to the length of the pack_name field. One
is for the trailing NUL, but the other has no purpose. This
is probably cargo-culted from add_packed_git, which gets the
".idx" path and needed to allocate enough space to hold the
matching ".pack" (though since 48bcc1c, we calculate the
size there differently).
This site, however, is using the raw path of a tempfile, and
does not need the extra byte. We can just replace the
allocation with FLEX_ALLOC_STR, which handles the allocation
and the NUL for us.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If our size computation overflows size_t, we may allocate a
much smaller buffer than we expected and overflow it. It's
probably impossible to trigger an overflow in most of these
sites in practice, but it is easy enough convert their
additions and multiplications into overflow-checking
variants. This may be fixing real bugs, and it makes
auditing the code easier.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Each of these cases can be converted to use ALLOC_ARRAY or
REALLOC_ARRAY, which has two advantages:
1. It automatically checks the array-size multiplication
for overflow.
2. It always uses sizeof(*array) for the element-size,
so that it can never go out of sync with the declared
type of the array.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The strbuf_getline() interface allows a byte other than LF or NUL as
the line terminator, but this is only because I wrote these
codepaths anticipating that there might be a value other than NUL
and LF that could be useful when I introduced line_termination long
time ago. No useful caller that uses other value has emerged.
By now, it is clear that the interface is overly broad without a
good reason. Many codepaths have hardcoded preference to read
either LF terminated or NUL terminated records from their input, and
then call strbuf_getline() with LF or NUL as the third parameter.
This step introduces two thin wrappers around strbuf_getline(),
namely, strbuf_getline_lf() and strbuf_getline_nul(), and
mechanically rewrites these call sites to call either one of
them. The changes contained in this patch are:
* introduction of these two functions in strbuf.[ch]
* mechanical conversion of all callers to strbuf_getline() with
either '\n' or '\0' as the third parameter to instead call the
respective thin wrapper.
After this step, output from "git grep 'strbuf_getline('" would
become a lot smaller. An interim goal of this series is to make
this an empty set, so that we can have strbuf_getline_crlf() take
over the shorter name strbuf_getline().
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The error message after a failing commit_lock_file() call sometimes
looks like this, causing confusion:
$ git remote add remote git@server.com/repo.git
error: could not commit config file .git/config
# Huh?!
# I didn't want to commit anything, especially not my config file!
While in the narrow context of the lockfile module using the verb
'commit' in the error message makes perfect sense, in the broader
context of git the word 'commit' already has a very specific meaning,
hence the confusion.
Reword these error messages to say "could not write" instead of "could
not commit".
While at it, include strerror in the error messages after writing the
config file or the credential store fails to provide some information
about the cause of the failure, and update the style of the error
message after writing the reflog fails to match surrounding error
messages (i.e. no '' around the pathname and no () around the error
description).
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Jeff King <peff@peff.net>
Many allocations that is manually counted (correctly) that are
followed by strcpy/sprintf have been replaced with a less error
prone constructs such as xstrfmt.
Macintosh-specific breakage was noticed and corrected in this
reroll.
* jk/war-on-sprintf: (70 commits)
name-rev: use strip_suffix to avoid magic numbers
use strbuf_complete to conditionally append slash
fsck: use for_each_loose_file_in_objdir
Makefile: drop D_INO_IN_DIRENT build knob
fsck: drop inode-sorting code
convert strncpy to memcpy
notes: document length of fanout path with a constant
color: add color_set helper for copying raw colors
prefer memcpy to strcpy
help: clean up kfmclient munging
receive-pack: simplify keep_arg computation
avoid sprintf and strcpy with flex arrays
use alloc_ref rather than hand-allocating "struct ref"
color: add overflow checks for parsing colors
drop strcpy in favor of raw sha1_to_hex
use sha1_to_hex_r() instead of strcpy
daemon: use cld->env_array when re-spawning
stat_tracking_info: convert to argv_array
http-push: use an argv_array for setup_revisions
fetch-pack: use argv_array for index-pack / unpack-objects
...
"git log --date=local" used to only show the normal (default)
format in the local timezone. The command learned to take 'local'
as an instruction to use the local timezone with other formats,
e.g. "git show --date=rfc-local".
* jk/date-local:
t6300: add tests for "-local" date formats
t6300: make UTC and local dates different
date: make "local" orthogonal to date format
date: check for "local" before anything else
t6300: add test for "raw" date format
t6300: introduce test_date() helper
fast-import: switch crash-report date to iso8601
Documentation/rev-list: don't list date formats
Documentation/git-for-each-ref: don't list date formats
Documentation/config: don't list date formats
Documentation/blame-options: don't list date formats
strncpy is known to be a confusing function because of its
termination semantics. These calls are all correct, but it
takes some examination to see why. In particular, every one
of them expects to copy up to the length limit, and then
makes some arrangement for terminating the result.
We can just use memcpy, along with noting explicitly how the
result is terminated (if it is not already obvious). That
should make it more clear to a reader that we are doing the
right thing.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we already know the length of a string (e.g., because
we just malloc'd to fit it), it's nicer to use memcpy than
strcpy, as it makes it more obvious that we are not going to
overflow the buffer (because the size we pass matches the
size in the allocation).
This also eliminates calls to strcpy, which make auditing
the code base harder.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we are allocating a struct with a FLEX_ARRAY member, we
generally compute the size of the array and then sprintf or
strcpy into it. Normally we could improve a dynamic allocation
like this by using xstrfmt, but it doesn't work here; we
have to account for the size of the rest of the struct.
But we can improve things a bit by storing the length that
we use for the allocation, and then feeding it to xsnprintf
or memcpy, which makes it more obvious that we are not
writing more than the allocated number of bytes.
It would be nice if we had some kind of helper for
allocating generic flex arrays, but it doesn't work that
well:
- the call signature is a little bit unwieldy:
d = flex_struct(sizeof(*d), offsetof(d, path), fmt, ...);
You need offsetof here instead of just writing to the
end of the base size, because we don't know how the
struct is packed (partially this is because FLEX_ARRAY
might not be zero, though we can account for that; but
the size of the struct may actually be rounded up for
alignment, and we can't know that).
- some sites do clever things, like over-allocating because
they know they will write larger things into the buffer
later (e.g., struct packed_git here).
So we're better off to just write out each allocation (or
add type-specific helpers, though many of these are one-off
allocations anyway).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We generally use 32-byte buffers to format git's "type size"
header fields. These should not generally overflow unless
you can produce some truly gigantic objects (and our types
come from our internal array of constant strings). But it is
a good idea to use xsnprintf to make sure this is the case.
Note that we slightly modify the interface to
write_sha1_file_prepare, which nows uses "hdrlen" as an "in"
parameter as well as an "out" (on the way in it stores the
allocated size of the header, and on the way out it returns
the ultimate size of the header).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When fast-import emits a crash report, it does so in the
user's local timezone. But because we omit the timezone
completely for DATE_LOCAL, a reader of the report does not
immediately know which time zone was used. Let's switch this
to ISO8601 instead, which includes the time zone.
This does mean we will show the time in UTC, but that's not
a big deal. A crash report like this will either be looked
at immediately (in which case nobody even looks at the
timestamp), or it will be passed along to a developer to
debug, in which case the original timezone is less likely to
be of interest.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git_path() and mkpath() are handy helper functions but it is easy
to misuse, as the callers need to be careful to keep the number of
active results below 4. Their uses have been reduced.
* jk/git-path:
memoize common git-path "constant" files
get_repo_path: refactor path-allocation
find_hook: keep our own static buffer
refs.c: remove_empty_directories can take a strbuf
refs.c: avoid git_path assignment in lock_ref_sha1_basic
refs.c: avoid repeated git_path calls in rename_tmp_log
refs.c: simplify strbufs in reflog setup and writing
path.c: drop git_path_submodule
refs.c: remove extra git_path calls from read_loose_refs
remote.c: drop extraneous local variable from migrate_file
prefer mkpathdup to mkpath in assignments
prefer git_pathdup to git_path in some possibly-dangerous cases
add_to_alternates_file: don't add duplicate entries
t5700: modernize style
cache.h: complete set of git_path_submodule helpers
cache.h: clarify documentation for git_path, et al
Because git_path uses a static buffer that is shared with
calls to git_path, mkpath, etc, it can be dangerous to
assign the result to a variable or pass it to a non-trivial
function. The value may change unexpectedly due to other
calls.
None of the cases changed here has a known bug, but they're
worth converting away from git_path because:
1. It's easy to use git_pathdup in these cases.
2. They use constructs (like assignment) that make it
hard to tell whether they're safe or not.
The extra malloc overhead should be trivial, as an
allocation should be an order of magnitude cheaper than a
system call (which we are clearly about to make, since we
are constructing a filename). The real cost is that we must
remember to free the result.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since 5a688fe4 ("core.sharedrepository = 0mode" should set, not
loosen, 2009-03-25), we kept reminding ourselves:
NEEDSWORK: this should be renamed to finalize_temp_file() as
"moving" is only a part of what it does, when no patch between
master to pu changes the call sites of this function.
without doing anything about it. Let's do so.
The purpose of this function was not to move but to finalize. The
detail of the primarily implementation of finalizing was to link the
temporary file to its final name and then to unlink, which wasn't
even "moving". The alternative implementation did "move" by calling
rename(2), which is a fun tangent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "git log" and friends a new "--date=format:..." option to
format timestamps using system's strftime(3).
* jk/date-mode-format:
strbuf: make strbuf_addftime more robust
introduce "format" date-mode
convert "enum date_mode" into a struct
show-branch: use DATE_RELATIVE instead of magic number
Often a fast-import stream builds a new commit on top of the
previous commit it built, and it often unconditionally emits a
"from" command to specify the first parent, which can be omitted in
such a case. This caused fast-import to forget the tree of the
previous commit and then re-read it from scratch, which was
inefficient. Optimize for this common case.
* mh/fast-import-optimize-current-from:
fast-import: do less work when given "from" matches current branch head
"git fast-import" learned to respond to the get-mark command via
its cat-blob-fd interface.
* mh/fast-import-get-mark:
fast-import: add a get-mark command
When building a fast-import stream, it's easy to forget the fact
that for non-merge commits happening on top of the current branch
head, there is no need for a "from" command. That is corroborated by
the fact that at least git-p4, hg-fast-export and felipec's
git-remote-hg all unconditionally use a "from" command.
Unfortunately, giving a "from" command always resets the branch
tree, forcing it to be re-read, and in many cases, the pack is also
closed and reopened through gfi_unpack_entry. Both are unnecessary
overhead, and the latter is particularly slow at least on OSX.
Avoid resetting the tree when it's unmodified, and avoid calling
gfi_unpack_entry when the given mark points to the same commit as
the current branch head.
Signed-off-by: Mike Hommey <mh@glandium.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It is sometimes useful for importers to be able to read the SHA-1
corresponding to a mark that they have created via fast-import. For
example, they might want to embed the SHA-1 into the commit message of
a later commit. Or it might be useful for internal bookkeeping uses,
or for logging.
Add a "get-mark" command to "git fast-import" that allows the importer
to ask for the value of a mark that has been created earlier.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In preparation for adding date modes that may carry extra
information beyond the mode itself, this patch converts the
date_mode enum into a struct.
Most of the conversion is fairly straightforward; we pass
the struct as a pointer and dereference the type field where
necessary. Locations that declare a date_mode can use a "{}"
constructor. However, the tricky case is where we use the
enum labels as constants, like:
show_date(t, tz, DATE_NORMAL);
Ideally we could say:
show_date(t, tz, &{ DATE_NORMAL });
but of course C does not allow that. Likewise, we cannot
cast the constant to a struct, because we need to pass an
actual address. Our options are basically:
1. Manually add a "struct date_mode d = { DATE_NORMAL }"
definition to each caller, and pass "&d". This makes
the callers uglier, because they sometimes do not even
have their own scope (e.g., they are inside a switch
statement).
2. Provide a pre-made global "date_normal" struct that can
be passed by address. We'd also need "date_rfc2822",
"date_iso8601", and so forth. But at least the ugliness
is defined in one place.
3. Provide a wrapper that generates the correct struct on
the fly. The big downside is that we end up pointing to
a single global, which makes our wrapper non-reentrant.
But show_date is already not reentrant, so it does not
matter.
This patch implements 3, along with a minor macro to keep
the size of the callers sane.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we are deleting the reference, then we don't need to read the
reference's old value. It doesn't provide any race safety, because the
value read just before the delete is no "better" than the value that
would be read under lock during the delete. And even if the reference
previously didn't exist, we can call delete_ref() on it if we don't
provide an old_sha1 value.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A replacement for contrib/workdir/git-new-workdir that does not
rely on symbolic links and make sharing of objects and refs safer
by making the borrowee and borrowers aware of each other.
* nd/multiple-work-trees: (41 commits)
prune --worktrees: fix expire vs worktree existence condition
t1501: fix test with split index
t2026: fix broken &&-chain
t2026 needs procondition SANITY
git-checkout.txt: a note about multiple checkout support for submodules
checkout: add --ignore-other-wortrees
checkout: pass whole struct to parse_branchname_arg instead of individual flags
git-common-dir: make "modules/" per-working-directory directory
checkout: do not fail if target is an empty directory
t2025: add a test to make sure grafts is working from a linked checkout
checkout: don't require a work tree when checking out into a new one
git_path(): keep "info/sparse-checkout" per work-tree
count-objects: report unused files in $GIT_DIR/worktrees/...
gc: support prune --worktrees
gc: factor out gc.pruneexpire parsing code
gc: style change -- no SP before closing parenthesis
checkout: clean up half-prepared directories in --to mode
checkout: reject if the branch is already checked out elsewhere
prune: strategies for linked checkouts
checkout: support checking out into a new working directory
...
Clear the git_zstream variable at the start of git_deflate_init() etc.
so that callers don't have to do that.
Signed-off-by: Rene Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify the ref transaction API around how "the ref should be
pointing at this object" is specified.
* mh/refs-have-new:
refs.h: remove duplication in function docstrings
update_ref(): improve documentation
ref_transaction_verify(): new function to check a reference's value
ref_transaction_delete(): check that old_sha1 is not null_sha1
ref_transaction_create(): check that new_sha1 is valid
commit: avoid race when creating orphan commits
commit: add tests of commit races
ref_transaction_delete(): remove "have_old" parameter
ref_transaction_update(): remove "have_old" parameter
struct ref_update: move "have_old" into "flags"
refs.c: change some "flags" to "unsigned int"
refs: remove the gap in the REF_* constant values
refs: move REF_DELETING to refs.c
"git fast-import" used to crash when it could not close and
conclude the resulting packfile cleanly.
* jk/fast-import-die-nicely-fix:
fast-import: avoid running end_packfile recursively
Instead, verify the reference's old value if and only if old_sha1 is
non-NULL.
ref_transaction_delete() will get the same treatment in a moment.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Stefan Beller <sbeller@google.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When an import has finished, we run end_packfile() to
finalize the data and move the packfile into place. If this
process fails, we call die() and end up in our die_nicely()
handler. Which unfortunately includes running end_packfile
to save any progress we made. We enter the function again,
and start operating on the pack_data struct while it is in
an inconsistent state, leading to a segfault.
One way to trigger this is to simply start two identical
fast-imports at the same time. They will both create the
same packfiles, which will then try to create identically
named ".keep" files. One will win the race, and the other
will die(), and end up with the segfault.
Since 3c078b9, we already reset the pack_data pointer to
NULL at the end of end_packfile. That covers the case of us
calling die() right after end_packfile, before we have
reinitialized the pack_data pointer. This new problem is
quite similar, except that we are worried about calling
die() _during_ end_packfile, not right after. Ideally we
would simply set pack_data to NULL as soon as we enter the
function, and operate on a copy of the pointer.
Unfortunately, it is not so easy. pack_data is a global, and
end_packfile calls into other functions which operate on the
global directly. We would have to teach each of these to
take an argument, and there is no guarantee that we would
catch all of the spots.
Instead, we can simply use a static flag to avoid
recursively entering the function. This is a little less
elegant, but it's short and fool-proof.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This allows git_path() to redirect info/fast-import to another place
if needed
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before the previous commit, get_pathname returns an array of PATH_MAX
length. Even if git_path() and similar functions does not use the
whole array, git_path() caller can, in theory.
After the commit, get_pathname() may return a buffer that has just
enough room for the returned string and git_path() caller should never
write beyond that.
Make git_path(), mkpath() and git_path_submodule() return a const
buffer to make sure callers do not write in it at all.
This could have been part of the previous commit, but the "const"
conversion is too much distraction from the core changes in path.c.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Change the ref transaction API so that we pass the reflog message to the
create/delete/update functions instead of to ref_transaction_commit.
This allows different reflog messages for each ref update in a multi-ref
transaction.
Signed-off-by: Ronnie Sahlberg <sahlberg@google.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Move the interface declaration for the functions in lockfile.c from
cache.h to a new file, lockfile.h. Add #includes where necessary (and
remove some redundant includes of cache.h by files that already
include builtin.h).
Move the documentation of the lock_file state diagram from lockfile.c
to the new header file.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When commit_lock_file() fails, it now always calls
rollback_lock_file() internally, so there is no need to call that
function here.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An attempt to remove the entire tree in the "git fast-import" input
stream caused it to misbehave.
* mb/fast-import-delete-root:
fast-import: fix segfault in store_tree()
t9300: test filedelete command
