Thoroughly revise the "git bisect" manpage, including:
* Beef up the "Description" section.
* Make the first long example less specific to kernel development.
* De-emphasize implementation details in a couple of places.
* Add "(roughly N steps)" in the places where example output is shown.
* Properly markup code within the prose.
* Lots of wordsmithing.
Signed-off-by: Michael Haggerty <mhagger@alum.mit.edu>
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"reset" can be easily misunderstood as resetting a bisect session to its
start without finishing it. Clarify that it actually quits the bisect
session.
Reported-by: Andreas Mohr <andi@lisas.de>
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This enhances the support for bisecting history in bare repositories.
The "git bisect" command no longer needs to be run inside a repository
with a working tree; it defaults to --no-checkout when run in a bare
repository.
Two tests are included to demonstrate this behaviour.
Suggested-by: Junio C Hamano <gitster@pobox.com>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The SYNOPSIS sections of most commands that span several lines already
use [verse] to retain line breaks. Most commands that don't span
several lines seem not to use [verse]. In the HTML output, [verse]
does not only preserve line breaks, but also makes the section
indented, which causes a slight inconsistency between commands that
use [verse] and those that don't. Use [verse] in all SYNOPSIS sections
for consistency.
Also remove the blank lines from git-fetch.txt and git-rebase.txt to
align with the other man pages. In the case of git-rebase.txt, which
already uses [verse], the blank line makes the [verse] not apply to
the last line, so removing the blank line also makes the formatting
within the document more consistent.
While at it, add single quotes to 'git cvsimport' for consistency with
other commands.
Signed-off-by: Martin von Zweigbergk <martin.von.zweigbergk@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give an example on how to bisect when older revisions need a hot-fix to
build, run or test. Triggered by the binutils/kernel issue at
http://thread.gmane.org/gmane.comp.gnu.binutils/52601/focus=1112779
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Streamline the presentation of "bisect run" by removing one example
which does not introduce new concepts.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
This patch adds an asciidoc version of the "Fighting regressions with
git bisect" article that the author wrote for the Linux-Kongress
2009 (http://www.linux-kongress.org/2009).
This paper might be interesting to people who want to learn as much as
possible about "git bisect" from a single document.
The slides of the related presentation are available at:
http://www.linux-kongress.org/2009/slides/fighting_regressions_with_git_bisect_christian_couder.pdf
But the Linux Kongress people will not publish this paper online because
they print the papers on their UpTimes magazine
(http://www.lob.de/isbn/978-3-86541-358-1). But they don't take away the
rights of the author (which is very nice), so I have the right to publish
it.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
‘git bisect reset’ accepts an optional argument specifying a branch to
check out after cleaning up the bisection state. This lets you
specify an arbitrary commit.
In particular, this provides a way to clean the bisection state
without moving HEAD: ‘git bisect reset HEAD’. This may be useful if
you are not interested in the state before you began a bisect,
especially if checking out the old commit would be expensive and
invalidate most of your compiled tree.
Clarify the ‘git bisect reset’ documentation to explain this optional
argument, which was previously mentioned only in the usage message.
Signed-off-by: Anders Kaseorg <andersk@mit.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This warning was probably useless anyway, but it is even more so now
that filtering of skipped commits is done in C and that there is a
mechanism to skip away from broken commits.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dm/maint-docco:
Documentation: Remove spurious uses of "you" in git-bisect.txt.
Documentation: minor grammatical fix in git-check-ref-format.txt
Documentation: minor grammatical fixes in git-check-attr.txt
Documentation: minor grammatical fixes in git-cat-file.txt
Documentation: minor grammatical fixes and rewording in git-bundle.txt
Documentation: remove some uses of the passive voice in git-bisect.txt
These were added by accident in a42dea3.
This patch also rewords the description of how ranges of commits can be
skipped.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* dm/maint-docco:
Documentation: reword example text in git-bisect.txt.
Documentation: reworded the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-branch.txt.
Documentation: minor grammatical fixes in git-blame.txt.
Documentation: reword the "Description" section of git-bisect.txt.
Documentation: minor grammatical fixes in git-archive.txt.
Avoid splitting sentences across examples of command usage.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Reword this section to make it less chatty. Also make minor grammatical
fixes.
Signed-off-by: David J. Mellor <dmellor@whistlingcat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Including passing parameters to the programs, and running more
complicated checks without requiring a seperate shell script.
Signed-off-by: John Tapsell <johnflux@gmail.com>
Acked-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The name `gitk` is sometimes meant to be entered at the command
prompt, but most uses are just referring to the program with that
name (not the incantation to start it).
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With git-commands moving out of $(bindir), it is useful to make a
clearer distinction between the git subcommand 'git-whatever' and
the command you type, `git whatever <options>`. So we use a dash
after "git" when referring to the former and not the latter.
I already sent a patch doing this same thing, but I missed some
spots.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
... because we are now bisecting using a detached HEAD.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before this patch, there were no "git bisect run" example.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If a branch named "bisect" or "new-bisect" already was created in the
repo by other means than git bisect, doing a git bisect used to override
the branch without a warning. Now if the branch "bisect" or
"new-bisect" already exists, and it was not created by git bisect itself,
git bisect start fails with an appropriate error message. Additionally,
if checking out a new bisect state fails due to a merge problem, git
bisect cleans up the temporary branch "new-bisect".
The accidental override has been noticed by Andres Salomon, reported
through
http://bugs.debian.org/478647
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users are not often aware of the fact that "git bisect -h" can give
them a long usage description, as "git bisect" seems to accept only
dashless subcommands like "start", "good", ...
That's why this patch adds a "git bisect help" subcommand that just
calls "git bisect -h". This new subcommand is also fully documented
in the short usage string (that "git bisect" gives), in the long
usage string and in the man page (that "git help bisect" gives).
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This teaches "git bisect visualize" to be more useful in non-windowed
environments.
(1) When no option is given, and $DISPLAY is set, it continues to
spawn gitk as before;
(2) When no option is given, and $DISPLAY is unset, "git log" is run
to show the range of commits between the bad one and the good ones;
(3) If only "-flag" options are given, "git log <options>" is run.
E.g. "git bisect visualize --stat"
(4) Otherwise, all of the given options are taken as the initial part
of the command line and the commit range expression is given to
that command. E.g. "git bisect visualize tig" will run "tig"
history viewer to show between the bad one and the good ones.
As "visualize" is a bit too long to type, we also give it a shorter
synonym "view".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is incompatible with previous versions because an exit code
of 125 used to mark current commit as "bad". But hopefully this exit
code is not much used by test scripts or other programs. (126 and 127
are used by POSIX compliant shells to mean "found but not
executable" and "command not found", respectively.)
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also fix "bisect bad" and "bisect good" short usage description.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
