Previously commits without parents would fail to export with a
message indicating that the commits had more than one parent.
Instead we should use the --root option for git-diff-tree in
place of a parent.
Signed-off-by: Brad King <brad.king@kitware.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Further 1.5.3.5 fixes described in release notes
Avoid invoking diff drivers during git-stash
attr: fix segfault in gitattributes parsing code
Define NI_MAXSERV if not defined by operating system
Ensure we add directories in the correct order
Avoid scary errors about tagged trees/blobs during git-fetch
CVS gets understandably upset if you try and add a subdirectory
before it's parent directory. This patch fixes that.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since commit e86ad71fe5 we do not use
a temporary directory in cvsexportcommit. So there is no need to set
one up.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
If git cvsexportcommit is executed fast enough in sequence, the CVS
timestamps could end up being the same. CVS tries to fix this
by sleeping until the CPU clock changes seconds. Unfortunately,
the CPU clock and the file system clock are not necessarily the same, so
the timestamps could be the same anyway. When that happens CVS may not
recognize changed files and cvs will forget to commit some files.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This uses "git-apply --whitespace=strip" to fix whitespace errors that have
crept in to our source files over time. There are a few files that need
to have trailing whitespaces (most notably, test vectors). The results
still passes the test, and build result in Documentation/ area is unchanged.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Runtime is now independent of the number of modified files.
The old implementation executed 'cvs status' for each file touched by the patch
to be applied. The new code calls 'cvs status' only once with all touched files
and parses cvs's output to collect all available status information.
Signed-off-by: Steffen Prohaska <prohaska@zib.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unlike 'patch --fuzz=NUM', which specifies the number of lines allowed
to mismatch, 'git-apply -CNUM' requests the match of NUM lines of
context. Omitting -C requests full context match, and that's what
should be used for cvsexportcommit -p.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Start preparing Release Notes for 1.5.0.3
Documentation: git-remote add [-t <branch>] [-m <branch>] [-f] name url
Include config.mak in doc/Makefile
git.el: Set the default commit coding system from the repository config.
git-archimport: support empty summaries, put summary on a single line.
http-push.c::lock_remote(): validate all remote refs.
git-cvsexportcommit: don't cleanup .msg if not yet committed to cvs.
Unless the -c option is given, and the commit to cvs was successful,
.msg shouldn't be deleted to be able to run the command suggested by
git-cvsexportcommit.
See http://bugs.debian.org/412732
Signed-off-by: Gerrit Pape <pape@smarden.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is necessary if using CVS in an asymmetric fashion, i.e. when the
CVSROOT you are checking out from differs from the CVSROOT you have to
commit to.
Signed-off-by: Simon 'corecode' Schubert <corecode@fs.ei.tum.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This can be used to compress multiple changesets into one, for example
like
git cvsexportcommit -P cvshead mybranch
without having to do so in git first.
Signed-off-by: Simon 'corecode' Schubert <corecode@fs.ei.tum.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch uses git-apply to do the patching which simplifies the code a lot
and also uses one pass to git-diff. git-apply gives information on added,
removed files as well as which files are binary.
Removed the test for checking for matching binary files when deleting them
since git-apply happily deletes the file. This is matter of taste since we
allow some fuzz for text patches also.
Error handling was cleaned up, but not much tested.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Otherwise, an executable script in git would end up being
checked into the CVS repository without the execute bit.
[jc: with an additional test script from Robin Rosenberg.]
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Also adds test cases for adding removing and deleting
binary and text files plus two tests for the checks on
binary files.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch adds support for -a which will add an "Author: " line, and possibly
a "Committer: " line to the bottom of the commit message for CVS.
The commit message parser is now a little bit better, and some warnings
have been cleaned up.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-cvsexportcommit should check if the parent (supplied on the cmdline) to use
for a merge commit is one of the real parents of the merge.
But it errors out if the _first_ parent doesn't match and never checks
the other parents.
Signed-off-by: Peter Baumann <siprbaum@stud.informatik.uni-erlangen.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a quick port of my initial patch for 1.0.7, that I had forgotten to
post. Possibly needs some testing before applying to master.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since there is no bugtracker that I know of, let's just use the scripts
themselves to document their limitations.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I cannot find when that flag was removed if it ever existed, I can find
nothing about it in the ChangeLog and NEWS file of GNU diff. The current
flag is -s aka --quiet aka --silent, so let's use -s, assuming it is a
portable flag. Feel free to lart me with a POSIX bible if needed.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Replaced backticks with potentially troublesome unescaped input with
safe_pipe_capture().
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"cvs add" support was already there, but the "unknown" status
returned when querying a file not yet known to cvs caused the
script to abort prematurely.
Signed-off-by: Junio C Hamano <junkio@cox.net>
A script that can replay commits git into a CVS checkout. Tries to ensure the
sanity of the operation and supports mainly manual usage.
If you are reckless enough, you can ask it to autocommit when everything has
applied cleanly. Combined with a couple more scripts could become part of
a git2cvs gateway.
Should support adds/removes and binary files.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz>
Signed-off-by: Junio C Hamano <junkio@cox.net>
