* lh/git-file:
Teach GIT-VERSION-GEN about the .git file
Teach git-submodule.sh about the .git file
Teach resolve_gitlink_ref() about the .git file
Add platform-independent .git "symlink"
* lh/branch-merged:
Add tests for `branch --[no-]merged`
git-branch.txt: compare --contains, --merged and --no-merged
git-branch: add support for --merged and --no-merged
As a nice side effect it also fixes t2002-checkout-cache-u.sh on FreeBSD 4,
/bin/sh of which has problems interpreting "! command" construction.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git clone [options] $src $dst excess-garbage" simply ignored
excess-garbage without giving any diagnostic message. Fix it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
remote: create fetch config lines with '+'
push: allow unqualified dest refspecs to DWIM
doc/git-gc: add a note about what is collected
t5516: remove ambiguity test (1)
Linked glossary from cvs-migration page
write-tree: properly detect failure to write tree objects
Since git-remote always uses remote tracking branches, it
should be safe to always force updates of those branches.
I.e., we should generate
fetch = +refs/heads/*:refs/remotes/$remote/*
instead of
fetch = refs/heads/*:refs/remotes/$remote/*
This was the behavior of the perl version, which seems to
have been lost in the C rewrite.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously, a push like:
git push remote src:dst
would go through the following steps:
1. check for an unambiguous 'dst' on the remote; if it
exists, then push to that ref
2. otherwise, check if 'dst' begins with 'refs/'; if it
does, create a new ref
3. otherwise, complain because we don't know where in the
refs hierarchy to put 'dst'
However, in some cases, we can guess about the ref type of
'dst' based on the ref type of 'src'. Specifically, before
complaining we now check:
2.5. if 'src' resolves to a ref starting with refs/heads
or refs/tags, then prepend that to 'dst'
So now this creates a new branch on the remote, whereas it
previously failed with an error message:
git push master:newbranch
Note that, by design, we limit this DWIM behavior only to
source refs which resolve exactly (including symrefs which
resolve to existing refs). We still complain on a partial
destination refspec if the source is a raw sha1, or a ref
expression such as 'master~10'.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This test tried to push into a remote with ambiguous refs in
remotes/$x/master and remotes/$y/master. However, the remote
never actually tells us about the refs/remotes hierarchy, so
we don't even see this ambiguity.
The test happened to pass because we were simply looking for
failure, and the test fails for another reason: the dst
refspec does not exist and does not begin with refs/, making
it invalid.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Tomasz Fortuna reported that "git commit" does not error out properly when
it cannot write tree objects out. "git write-tree" shares the same issue,
as the failure to notice the error is deep in the logic to write tree
objects out recursively.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Amend git-push refspec documentation
git-gc --prune is deprecated
svn-git: Use binmode for reading/writing binary rev maps
diff options documentation: refer to --diff-filter in --name-status
Don't force imap.host to be set when imap.tunnel is set
git-clone.txt: Adjust note to --shared for new pruning behavior of git-gc
git-svn bug with blank commits and author file
archive.c: format_subst - fixed bogus argument to memchr
copy.c: copy_fd - correctly report write errors
gitattributes: Fix subdirectory attributes specified from root directory
This patch adds a remote.*.mirror configuration option that,
when set, automatically puts git-push in --mirror mode for that
remote.
Furthermore, the option is set automatically by `git remote
add --mirror'.
The code in remote.c to parse remote.*.skipdefaultupdate
had a subtle problem: a comment in the code indicated that
special care was needed for boolean options, but this care was
not used in parsing the option. Since I was touching related
code, I did this fix too.
[jc: and I further fixed up the "ignore boolean" code.]
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
gitweb: Fix 'history' view for deleted files with history
Document that WebDAV doesn't need git on the server, and works over SSL
git-remote: reject adding remotes with invalid names
am: POSIX portability fix
When asked for history of a file which is not present in given branch
("HEAD", i.e. current branch, or given by transient $hash_hase ('hb')
parameter), but is present deeper in the history (meaning that "git
rev-list --full-history $hash_base -- $file_name" is not empty), and
there is no $hash ('h') parameter set for a file, gitweb would spew
multiple of "Use of uninitialized value" warnings, and some links
would be missing. This commit fixes this bug.
This bug occurs in the rare cases when "git log -- <path>" is empty
and "git log --full-history -- <path>" is not, or to be more exact in
the cases when full-history starts later than given branch. It can
happen if you are using handcrafted gitwb URL, or if you follow
generic 'history' link or bookmark for a file which got deleted.
Gitweb tried to get file type ('tree', or 'blob', or even 'commit')
from the commit we start searching from (where the file was not
present), and not among found commits. This was the cause of "Use of
uninitialized value" warnings.
This commit also add tests for such situation to t9500 test.
While we are it, return HTTP error if there is _no_ history; it means
that file or directory was not found (for given branch). Also error
out if type of item could not be found: it should not happen now, but
better be sure.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This can happen if the arguments to git-remote add is switched by the
user, and git would only show an error if fetching was also requested.
Fix it by using the refspec parsing engine to check if the requested
name can be parsed as a remote before add it.
Also cleanup so that the "remote.<name>.url" config name buffer is only
initialized once.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git init --shared=0xxx, where '0xxx' is an octal number, will create
a repository with file modes set to '0xxx'. Users with a safe umask
value (0077) can use this option to force file modes. For example,
'0640' is a group-readable but not group-writable regardless of
user's umask value. Values compatible with old Git versions are written
as they were before, for compatibility reasons. That is, "1" for
"group" and "2" for "everybody".
"git config core.sharedRepository 0xxx" is also handled.
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Traditionally git-rebase was implemented in terms of "format-patch" piped
to "am -3", to strike balance between speed (because it avoids a rather
expensive read-tree/merge-recursive machinery most of the time) and
flexibility (the magic "-3" allows it to fall back to 3-way merge as
necessary). However, this combination has one flaw when dealing with a
nonstandard commit log message format that has more than one lines in the
first paragraph.
This teaches "git am --rebasing" to take advantage of the fact that the
mbox message "git rebase" prepares for it records the original commit
object name, to get the log message from the original commit object
instead.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-bisect: make "start", "good" and "skip" succeed or fail atomically
git-am: cope better with an empty Subject: line
Ignore leading empty lines while summarizing merges
bisect: squelch "fatal: ref HEAD not a symref" misleading message
builtin-apply: Show a more descriptive error on failure when opening a patch
Clarify documentation of git-cvsserver, particularly in relation to git-shell
* maint-1.5.4:
git-bisect: make "start", "good" and "skip" succeed or fail atomically
git-am: cope better with an empty Subject: line
Ignore leading empty lines while summarizing merges
bisect: squelch "fatal: ref HEAD not a symref" misleading message
builtin-apply: Show a more descriptive error on failure when opening a patch
Clarify documentation of git-cvsserver, particularly in relation to git-shell
Before this patch, when "git bisect start", "git bisect good" or
"git bisect skip" were called with many revisions, they could fail
after having already marked some revisions as "good", "bad" or
"skip".
This could be especilally bad for "git bisect start" because as
the file ".git/BISECT_NAMES" would not have been written, there
would have been no attempt to clear the marked revisions on a
"git bisect reset". That's because if there is no
".git/BISECT_NAMES" file, nothing is done to clean things up, as
the bisect session is not supposed to have started.
While at it, let's also create the ".git/BISECT_START" file, only
after ".git/BISECT_NAMES" as been created.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git clean: Add test to verify directories aren't removed with a prefix
git clean: Don't automatically remove directories when run within subdirectory
git-submodule - possibly use branch name to describe a module
The earlier one botched the return value logic between config_bool and
config_bool_and_int. The former should normalize between 0 and 1 while
the latter should give back full range of integer values.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --for-status option is mainly used by builtin-status/commit.
It adds 'Modified submodules:' line at top and '# ' prefix to all
following lines.
Signed-off-by: Ping Yin <pkufranky@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The script had an unconditional output done outside of test_expect_*
construct, which leaked out and contaminated the output without -v.
Squelch it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also tighten test to require it to be correct.
Signed-off-by: Daniel Barkalow <barkalow@iabervon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
git-submodule: Avoid 'fatal: cannot describe' message
Force the medium pretty format on calls to git log
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
* maint-1.5.4:
bisect: fix bad rev checking in "git bisect good"
revision.c: make --date-order overriddable
Fix section about backdating tags in the git-tag docs
Document option --only of git commit
Documentation/git-request-pull: Fixed a typo ("send" -> "end")
It seems that "git bisect good" and "git bisect skip" have never
properly checked arguments that have been passed to them. As soon
as one of them can be parsed as a SHA1, no error or warning would
be given.
This is because 'git rev-parse --revs-only --no-flags "$@"' always
"exit 0" and outputs all the SHA1 it can found from parsing "$@".
This patch fix this by using, for each "bisect good" argument, the
same logic as for the "bisect bad" argument.
While at it, this patch teaches "bisect bad" to give a meaningfull
error message when it is passed more than one argument.
Note that if "git bisect good" or "git bisect skip" is given some
proper revs and then something that is not a proper rev, then the
first proper revs will still have been marked as "good" or "skip".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
git-fetch: fix status output when not storing tracking ref
core-tutorial.txt: Fix showing the current behaviour.
git-archive: ignore prefix when checking file attribute
Fix documentation syntax of optional arguments in short options.
* maint-1.5.4:
core-tutorial.txt: Fix showing the current behaviour.
git-archive: ignore prefix when checking file attribute
Fix documentation syntax of optional arguments in short options.
Ulrik Sverdrup noticed that git-archive doesn't correctly apply the attribute
export-subst when the option --prefix is given, too.
When it checked if a file has the attribute turned on, git-archive would try
to look up the full path -- including the prefix -- in .gitattributes. That's
wrong, as the prefix doesn't need to have any relation to any existing
directories, tracked or not.
This patch makes git-archive ignore the prefix when looking up if value of the
attribute export-subst for a file.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This patch allows .git to be a regular textfile containing the path of
the real git directory (prefixed with "gitdir: "), which can be useful on
platforms lacking support for real symlinks.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* mk/unpack-careful:
t5300: add test for "index-pack --strict"
receive-pack: allow using --strict mode for unpacking objects
unpack-objects: fix --strict handling
t5300: add test for "unpack-objects --strict"
unpack-objects: prevent writing of inconsistent objects
When using git-svn to follow only a single (empty) path per
svn-remote (i.e. not using --stdlayout), following the history
of a renamed path was broken in
c586879cdf.
This reverts the regression for the single (emtpy) path per
svn-remote case.
To avoid breaking the tests in a committed revision, this is an
addendum to a patch originally submitted by
Santhosh Kumar Mani <santhoshmani@gmail.com>:
> git-svn: add test for renamed directory fetch
>
> This test tries to fetch a directory which had renames in the
> history from a SVN repository.
[ew: unneccesary dependency on the starting an HTTP server
removed from Santhosh's original test.]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In commit 15387e3 (Test suite: reset TERM to its previous value after
testing., 2007-10-26), I added a workaround to reset TERM to its previous
value before the "test_done" at the end of "t7005-editor.sh" because
otherwise "test_done" would have printed the test result with a bad TERM
env variable (this resulted in output with no color on konsole).
But since commit c2116a1 (test-lib: fix TERM to dumb for test
repeatability, 2008-03-06), colored output is printed in a subshell with
TERM reset to its original value so the earlier workaround is not needed
anymore.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier commit 4be6096 (apply --unidiff-zero: loosen sanity checks for
--unidiff=0 patches, 2006-09-17) made match_beginning and match_end
computed incorrectly. If a hunk inserts at the beginning, old position
recorded at the hunk is line 0, and if a hunk changes at the beginning, it
is line 1. The new test added to t4104 exposes that the old code did not
insist on matching at the beginning for a patch to add a line to an empty
file.
An even older 65aadb9 (apply: force matching at the beginning.,
2006-05-24) was equally wrong in that it tried to take hints from the
number of leading context lines, to decide if the hunk must match at the
beginning, but we can just look at the line number in the hunk to decide.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
