* maint:
git-apply: do not fix whitespaces on context lines.
diff --cc: integer overflow given a 2GB-or-larger file
mailinfo: do not get confused with logical lines that are too long.
It basically considers all the continuation lines to be lines of their
own, and if the total line is bigger than what we can fit in it, we just
truncate the result rather than stop in the middle and then get confused
when we try to parse the "next" line (which is just the remainder of the
first line).
[jc: added test, and tightened boundary a bit per list discussion.]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
test-lib:
Make sure test-chmtime has been built before starting.
t4200-rerere:
Removed non-portable date dependency and avoid touch
Avoid "test -a" which isn't portable, either
lib-git-svn:
Use test-chmtime instead of Perl one-liner to poke
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
These tests are very similar as the ones I used for useSvmProps
and expect the same results because both dumps were generated
from the same original repo.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
svm:mirror is not useful at all for us. Parts of the old unit
test were broken and based on my misunderstanding of the
svm:mirror property.
When we read svm:source; make sure we correctly handle the '!'
in it: it is used to separate the path of the repository root
from the virtual path within the repository. We don't need
to make that distinction, honestly!
We also ensure that subdirectories are also mirrored with the
correct URL if we're using useSvmProps.
We have a new test that uses dumped repo that was really
created using SVN::Mirror to avoid ambiguities and
mis-understandings about the svm: properties.
Note: trailing whitespace in the svm.dump file is unfortunately
a reality and required by SVN; so please ignore it when applying
this patch.
Also, ensure that the -R/--remote/--svn-remote flag is always
in effect if explicitly passed via the command-line. This
allows us to track logically different mirrors sharing the
same URL (probably common with SVN::Mirror/SVK users).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Having it named as 'config' prevents us from tracking a
ref named 'config', which is a huge mistake.
On the non-technical side, the word 'config' implies that
a user can freely modify it; but that's not the case
here.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
* avoid skipping modification-only changes in fetch
* correctly fetch when we only have branches and tags
to glob from (no fetch keys defined)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
multi-init is now just an alias that requires -T/-t/-b;
all options that 'init' can now accept.
This will hopefully simplify usage and reduce typing.
Also, allow the --shared option in 'init' to take an optional
argument now that 'git-init --shared' supports an optional
argument.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Some of the repo-config => config renaming missed the git-svn
tests; so I'm just renaming them to be consisten with the
rest of the modern git.
Also, some of the newer tests didn't have 'poke' in them
to workaround race conditions on fast machines. This adds
places where they can _possibly_ occur; but I don't have
fast enough hardware to trigger them.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
A manual test that sets up a repository that looks like an SVK depot,
and then imports it to check that it looks like we mirrored the
'original' source.
There is also a minor modification to the git-svn test library shell
file which sets a variable for the subversion repository's filesystem
path.
[ew: made some of the tests stricter and more thorough]
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We need a separate .rev_db file for each repository we're
tracking. This allows us to track the same logical path off
multiple mirrors. We preserve a symlink to the old .rev_db
(no-UUID) if we're (auto-)migrating from an old version to
preserve backwards compatibility.
Also, get rid of the uuid() wrapper since we cache UUID in our
private config, and the SVN::Ra::get_uuid() function memoizes
the return value per-connection.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Several bugs were found and fixed while getting this to work:
* Remember the 'R'(eplace) case of actions and treat it like we
would an 'A'(dd) case.
* Fix a small case of follow-parent missing a parent if a
subdirectory was modified in the revision where the parent was
copied.
* dirents returned by get_dir sometimes expire if the data
structure is too big and the pool is destroyed, so we
cache get_dir (along with check_path and get_revprops)
temporarily along with its pool.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
--no-follow-parent disables and reverts it back to the old
default behavior of not following parents (if you don't care for
full history).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We can have a branch that was deleted, then re-added under the
same name but copied from another path, in which case we'll have
multiple parents (we don't want to break the original ref, nor
lose copypath info).
Add a test for this, too, of course.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
It can be confusing and redundant, since historically the
default remote ref (not remote itself) has been "git-svn", too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Having 'fetch' entries in the config file created from
--follow-parent is wasteful because it can cause *future* of
invocations to follow revisions we were never interested in
in the first place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We no longer delete the top-level directory even if it got
deleted from the upstream repository. In gs_do_update; we
double-check that the path we're tracking exists at both
endpoints before proceeding. We have also added additional
protection against fetching revisions out-of-order.
To simplify our internal interfaces, I've disabled passing the
'recursive' flag to the gs_do_{switch,update} wrapper functions
since we always want it in git-svn. We also pass the
entire Git::SVN object rather than just the path because it
helped me debug.
When printing progress, the refname is printed out to make
it less confusing when multi-fetch is running.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
We were still skipping path information from get_log if we are
tracking /r9270/drunk/subversion/bindings/..., but got something
like this in the log:
A /r9270/drunk (from /r9270/trunk:14)
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Using path names as refnames breaks horribly if a user is
tracking one large, toplevel directory, and a lower-level
directory is followed from another project is a parent
of another ref, as it will cause refnames such as:
'refs/remotes/trunk/path/to/stuff', which will conflict
with a refname of 'refs/remotes/trunk'.
Now we just append @$revno to the end of it the current
refname. And if we have followed back to a grandparent, then
we'll strip any existing '@$parent_revno' strings before
appending our own '@$revno' string to it.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
The do_update or do_switch functions in SVN only allow for a
single path component; so 'path/to/deep/dir' would be
interpreted as 'path'.
SVN 1.4.x has a reparent function that can let us change the
session to use a higher-level root of the repository, so we can
use that for do_switch (which still doesn't seem to work in SVN
1.4.3 (a fix was attempted, but they missed the rest of the
typemap changes needed in trunk...)).
On the do_update side, we can use set_path on higher level
directories and set them to a newer revision so they don't get
updated. We can't do this with do_switch, either, because the
relative path we're tracking can change (directory moving into
a child of itself).
Because of these changes, we need to double check that our Fetch
editor is correctly performing stripping on any prefixed paths
from update, otherwise we'll just die() because that would be
a bug.
Added a test case which helped me notice and fix problems with
do_switch, too.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
I broke this part with the URL minimization; since
git-svn will now try to connect to the root of
the repository and will end up writing files
there if it can...
Signed-off-by: Eric Wong <normalperson@yhbt.net>
svn_log_changed_path_t structs were being used out of scope
outside of svn_ra_get_log (because I wanted to eventually be
able to use git-svn with only a single connection to the
repository). So now we dup them into a hash.
This was fixed while making --follow-parent fetches more
efficient. I've moved parsing of the command-line --revision
argument outside of the Git::SVN module so Git::SVN::fetch() can
be used in more places (such as find_parent_branch).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
git-svn has never been able to handle deleted branches very well
because svn_ra_get_log() is all-or-nothing, meaning that if the
max revision passed to it does not contain the path we're
tracking, we miss all the revisions in the repository.
Branches fetched using --follow-parent still do this
sub-optimally (will be fixed soon). --follow-parent will soon
become the default, so we will assume that when using get_log();
We will also avoid tracking revprops for revisions with no
path-related changes since otherwise we just end up pulling
logs to paths we don't care about.
Also added a test for this to t9104-git-svn-follow-parent.sh and
correctly commit the log message in the preceeding test (which
conflicted with a filename).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
They simply aren't interesting to track, and this will allow
us to avoid get_log().
Since r0 is covered by this, we need to update the tests to not
rely on r0 (which is always empty).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This means that tracking the path of:
/another-larger/trunk/thunk/bump/thud inside a repository
would follow:
/larger-parent/trunk/thunk/bump/thud
even if the svn log output looks like this:
--------------------------------------------
Changed paths:
A /another-larger (from /larger-parent:5)
--------------------------------------------
Note: the usage of get_log() in git-svn still makes a
an assumption that shouldn't be made with regard to
revisions existing for a particular path.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
This allows connections to be used more efficiently and not require
users to run 'git-svn migrate --minimize' for new repositories.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Having multiple fetch refspecs pointing to the same local ref
would be a very bad thing. Start avoiding the use of fatal() or
exit() inside the modules so we can libify more easily.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Bugs fixed:
* We didn't allow manually (not using git-svn) init-ed
remotes/fetch refspecs to be used before. It works now
because that's what I did in this test. git-svn init should
offer more control in the future.
* correctly strip paths in the delta editor when using
do_switch().
* Make the -i / GIT_SVN_ID option work correctly when doing
fetch on a multi-ref svn-remote
Signed-off-by: Eric Wong <normalperson@yhbt.net>
--minimize will update the git-svn configuration to attempt to
connect to the repository root (instead of directly to the
path(s) we are tracking) in order to allow more efficient reuse
of connections (for multi-fetch and follow-parent).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Of course, we handle metadata migrations from previous versions
and we have added unit tests.
The new .git/config remotes resemble non-SVN remotes. Below
is an example with comments:
[svn-remote "git-svn"]
; like non-svn remotes, we have one URL per-remote
url = http://foo.bar.org/svn
; 'fetch' keys are done in the same way as non-svn
; remotes, too. With the left-hand-side of the ':'
; being the remote (SVN) repository path relative to the
; above 'url' key; and the right-hand-side being a
; remote ref in git (refs/remotes/*).
; An empty left-hand-side means that it will fetch
; the entire contents of the 'url' key.
; old-style (migrated from previous versions of git-svn)
; are like this:
fetch = :refs/remotes/git-svn
; this is created by a current version of git-svn
; using the multi-init command with an explicit
; url (specified above). This allows multi-init
; to reuse SVN::Ra connections.
fetch = trunk:refs/remotes/trunk
fetch = branches/a:refs/remotes/a
fetch = branches/b:refs/remotes/b
fetch = tags/0.1:refs/remotes/tags/0.1
fetch = tags/0.2:refs/remotes/tags/0.2
fetch = tags/0.3:refs/remotes/tags/0.3
[svn-remote "alt"]
; this is another old-style remote migrated over
; to the new config format
url = http://foo.bar.org/alt
fetch = :refs/remotes/alt
Signed-off-by: Eric Wong <normalperson@yhbt.net>
It's becoming a maintenance burden. I've never found it
particularly useful myself, nor have I heard much feedback about
it; so I'm assuming it's just as useless to everyone else.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
If a user specified a seperate URL and --tags/--branches as
a sepearte URL, allow the Ra object (and therefore the connection)
to be reused.
We'll get rid of libsvn_ls_fullurl() since it was only used
in one place.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Some workflows require use of repositories on machines that cannot be
connected, preventing use of git-fetch / git-push to transport objects and
references between the repositories.
git-bundle provides an alternate transport mechanism, effectively allowing
git-fetch and git-pull to operate using sneakernet transport. `git-bundle
create` allows the user to create a bundle containing one or more branches
or tags, but with specified basis assumed to exist on the target
repository. At the receiving end, git-bundle acts like git-fetch-pack,
allowing the user to invoke git-fetch or git-pull using the bundle file as
the URL. git-fetch and git-ls-remote determine they have a bundle URL by
checking that the URL points to a file, but are otherwise unchanged in
operation with bundles.
The original patch was done by Mark Levedahl <mdl123@verizon.net>.
It was updated to make git-bundle a builtin, and get rid of the tar
format: now, the first line is supposed to say "# v2 git bundle", the next
lines either contain a prerequisite ("-" followed by the hash of the
needed commit), or a ref (the hash of a commit, followed by the name of
the ref), and finally the pack. As a result, the bundle argument can be
"-" now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This was done by setting $HOME to somewhere bogus. A better method is
to reuse $GIT_CONFIG, which was invented for ignoring the global
config file explicitely.
Technically, setting GIT_CONFIG=.git/config could be wrong, but it
passes all the tests, and we can keep the tests that way.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* lt/crlf:
Teach core.autocrlf to 'git apply'
t0020: add test for auto-crlf
Make AutoCRLF ternary variable.
Lazy man's auto-CRLF
* jc/apply-config:
t4119: test autocomputing -p<n> for traditional diff input.
git-apply: guess correct -p<n> value for non-git patches.
git-apply: notice "diff --git" patch again
Fix botched "leak fix"
t4119: add test for traditional patch and different p_value
apply: fix memory leak in prefix_one()
git-apply: require -p<n> when working in a subdirectory.
git-apply: do not lose cwd when run from a subdirectory.
Teach 'git apply' to look at $HOME/.gitconfig even outside of a repository
Teach 'git apply' to look at $GIT_DIR/config
This enhances the third point in the previous commit. When
applying a non-git patch that begins like this:
--- 2.6.orig/mm/slab.c
+++ 2.6/mm/slab.c
@@ -N,M +L,K @@@
...
and if you are in 'mm' subdirectory, we notice that -p2 is the
right option to use to apply the patch in file slab.c in the
current directory (i.e. mm/slab.c)
The guess function also knows about this pattern, where you
would need to use -p0 if applying from the top-level:
--- mm/slab.c
+++ mm/slab.c
@@ -N,M +L,K @@@
...
Signed-off-by: Junio C Hamano <junkio@cox.net>
Earlier one that tried to be too consistent with GNU patch by
not stripping the leading path when we _know_ we are in a
subdirectory and the patch is relative to the toplevel was a
mistake. This fixes it.
- No change to behaviour when it is run from the toplevel of
the repository.
- When run from a subdirectory to apply a git-generated patch,
it uses the right -p<n> value automatically, with or without
--index nor --cached option.
- When run from a subdirectory to apply a randomly generated
patch, it wants the right -p<n> value to be given by the
user.
The second one is a pure improvement to correct inconsistency
between --index and non --index case, compared with 1.5.0. The
third point could be further improved to guess what the right
value for -p<n> should be by looking at the patch, but should be
a topic of a separate patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-apply running inside a subdirectory, with or without --index,
used to always assume that the patch is formatted in such a way
to apply with -p1 from the toplevel, but it is more useful and
consistent with the use of "GNU patch -p1" if it defaulted to
assume that its input is meant to apply at the level it is
invoked in.
This changes the behaviour. It used to be that the patch
generated this way would apply without any trick:
edit Documentation/Makefile
git diff >patch.file
cd Documentation
git apply ../patch.file
You need to give an explicit -p2 to git-apply now. On the other
hand, if you got a patch from somebody else who did not follow
"patch is to apply from the top with -p1" convention, the input
patch would start with:
diff -u Makefile.old Makefile
--- Makefile.old
+++ Makefile
and in such a case, you can apply it with:
git apply -p0 patch.file
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Update draft release notes for 1.5.0.1
Convert update-index references in docs to add.
Attempt to improve git-rebase lead-in description.
Do not take mode bits from index after type change.
git-blame: prevent argument parsing segfault
Make gitk save and restore window pane position on Linux and Cygwin.
Make gitk save and restore the user set window position.
[PATCH] gitk: Use show-ref instead of ls-remote
[PATCH] Make gitk work reasonably well on Cygwin.
[PATCH] gitk - remove trailing whitespace from a few lines.
Change git repo-config to git config
This teaches git-apply that the data read from and written to
the filesystem might need to get converted to adjust for local
line-ending convention.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When neither --index nor --cached was used, git-apply did not
try calling setup_git_directory(), which means it did not look
at configuration files at all. This fixes it to call the setup
function but still allow the command to be run in a directory
not controlled by git.
The bug probably meant that 'git apply', not moving up to the
toplevel, did not apply properly formatted diffs from the
toplevel when you are inside a subdirectory, even though 'git
apply --index' would. As a side effect, this patch fixes it as
well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When we do not trust executable bit from lstat(2), we copied
existing ce_mode bits without checking if the filesystem object
is a regular file (which is the only thing we apply the "trust
executable bit" business) nor if the blob in the index is a
regular file (otherwise, we should do the same as registering a
new regular file, which is to default non-executable).
Noticed by Johannes Sixt.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This tests lowlevel of update/checkout codepaths and some patch
application. Currently, variants of "git apply" that look at
the working tree files does not work, so it does not test the
patch application without parameter and with --index parameter
when autocrlf is set to produce CRLF files.
We should add test for diff generation too.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some of the git-svn tests can fail on fast machines due to a race in
Subversion: if a file is modified in the same second it was checked out
(or in for that matter), Subversion will not consider it modified. This
works around the problem by increasing the timestamp by one second
before each commit.
[jc: with "touch -r -d" replacement from Eric]
Acked-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Michael Spang <mspang@uwaterloo.ca>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It was suggested on the mailing list that being able to use `from`
in any commit to reset the current branch is useful in some types of
importers, such as a darcs importer.
We originally did not permit resetting an existing branch with a
new `from` command during a `commit` command, but this restriction
was only to help debug the hacked up cvs2svn that Jon Smirl was
developing in parallel with git-fast-import. It is probably more
of a problem to disallow it than to allow it. So now we permit a
`from` during any `commit`.
While making the changes required to permit multiple `from`
commands on the same branch, I discovered we no longer needed the
last_commit field to be set to 0 during a reset, so that was removed.
(Reset was originally setting the field to 0 to signal cmd_from()
that it was OK to execute on the branch.)
While poking around in this section of fast-import I also realized
the `reset` command was not working as intended if the corresponding
`from` command was omitted (as allowed by the BNF grammar and the
code). If `from` was omitted we cleared out the tree but we left
the tree SHA-1 and parent commit SHA-1 intact. This is not what
the user intended in this case. Instead they would be trying to
reset the branch to have no parent and to have no tree, making the
branch look new-born during the next commit. We now clear these
SHA-1 values during `reset`, ensuring the branch looks new-born if
`from` does not get supplied.
New test cases for these were also added.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* 'master' of git://repo.or.cz/git/fastimport:
bash: Hide git-fast-import.
fast-import: Add tip about importing renames.
fast-import: Hide the pack boundary commits by default.
Most users don't need the pack boundary information that fast-import
was printing to standard output, especially if they were calling
it with --quiet.
Those users who do want this information probably want it captured
so they can go back and use it to repack the imported repository.
So dumping the boundary commits to a log file makes more sense then
printing them to standard output.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Quite nonstandard "date -d @11111111 +%s" does not even fail on
OpenBSD but gives the current date in "seconds since epoch"
format, which is useless for the purpose of this test. We want
to make sure that this returns exactly the same input before
proceeding.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master' of git://repo.or.cz/git/fastimport:
Add a Tips and Tricks section to fast-import's manual.
Don't crash fast-import if the marks cannot be exported.
Dump all refs and marks during a checkpoint in fast-import.
Teach fast-import how to sit quietly in the corner.
Teach fast-import how to clear the internal branch content.
Minor timestamp related documentation corrections for fast-import.
Use sed instead, it comes with cygwin and there is almost no chance of
someone installing a sed with default CRLF lineendings by accident.
Signed-off-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some frontends may not be able to (easily) keep track of which files
are included in the branch, and which aren't. Performing this
tracking can be tedious and error prone for the frontend to do,
especially if its foreign data source cannot supply the changed
path list on a per-commit basis.
fast-import now allows a frontend to request that a branch's tree
be wiped clean (reset to the empty tree) at the start of a commit,
allowing the frontend to feed in all paths which belong on the branch.
This is ideal for a tar-file importer frontend, for example, as
the frontend just needs to reformat the tar data stream into a gfi
data stream, which may be something a few Perl regexps can take
care of. :)
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
* 'master' of git://repo.or.cz/git/fastimport: (81 commits)
S_IFLNK != 0140000
Don't do non-fastforward updates in fast-import.
Support RFC 2822 date parsing in fast-import.
Minor fast-import documentation corrections.
Remove unnecessary null pointer checks in fast-import.
Correct fast-import timezone documentation.
Correct minor style issue in fast-import.
Correct compiler warnings in fast-import.
Remove --branch-log from fast-import.
Initial draft of fast-import documentation.
Don't support shell-quoted refnames in fast-import.
Reduce memory usage of fast-import.
Include checkpoint command in the BNF.
Accept 'inline' file data in fast-import commit structure.
Reduce value duplication in t9300-fast-import.
Create test case for fast-import.
Support delimited data regions in fast-import.
Remove unnecessary options from fast-import.
Use fixed-size integers when writing out the index in fast-import.
Always use struct pack_header for pack header in fast-import.
...
If fast-import is being used to update an existing branch of
a repository, the user may not want to lose commits if another
process updates the same ref at the same time. For example, the
user might be using fast-import to make just one or two commits
against a live branch.
We now perform a fast-forward check during the ref updating process.
If updating a branch would cause commits in that branch to be lost,
we skip over it and display the new SHA1 to standard error.
This new default behavior can be overridden with `--force`, like
git-push and git-fetch.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Since some frontends may be working with source material where
the dates are only readily available as RFC 2822 strings, it is
more friendly if fast-import exposes Git's parse_date() function
to handle the conversion. This way the frontend doesn't need
to perform the parsing itself.
The new --date-format option to fast-import can be used by a
frontend to select which format it will supply date strings in.
The default is the standard `raw` Git format, which fast-import
has always supported. Format rfc2822 can be used to activate the
parse_date() function instead.
Because fast-import could also be useful for creating new, current
commits, the format `now` is also supported to generate the current
system timestamp. The implementation of `now` is a trivial call
to datestamp(), but is actually a whole whopping 3 lines so that
fast-import can verify the frontend really meant `now`.
As part of this change I have added validation of the `raw` date
format. Prior to this change fast-import would accept anything
in a `committer` command, even if it was seriously malformed.
Now fast-import requires the '> ' near the end of the string and
verifies the timestamp is formatted properly.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
We at least know that the test as written has a problem in an
environment where "touch '$p'; ls | fgrep '$p'" fails, and have
a clear understand why it fails.
This tests if the filesystem has that particular issue we know "git
add" has a problem with, and skips the test in such an environment.
This way, we might catch issues "git add" might have in other environments.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When using --reference to borrow objects from a neighbouring
repository while cloning, we copy the entire set of refs under
temporary "refs/reference-tmp/refs" space and set up the object
alternates. However, a textual symref copied this way would not
point at the right place, and causes later steps to emit error
messages (which is harmless but still alarming). This is most
visible when using a clone created with the separate-remote
layout as a reference, because such a repository would have
refs/remotes/origin/HEAD with 'ref: refs/remotes/origin/master'
as its contents.
Although we do not create symbolic-link based refs anymore, they
have the same problem because they are always supposed to be
relative to refs/ hierarchy (we dereference by hand, so it only
is good for HEAD and nothing else).
In either case, the solution is simply to remove them after
copying under refs/reference-tmp; if a symref points at a true
ref, that true ref itself is enough to ensure that objects
reachable from it do not needlessly get fetched.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Its really nice to be able to run a test with -v and automatically
see the "debugging" dump from merge-recursive, especially if we
are actually trying to debug merge-recursive.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
My earlier fix (8371234e) to delete renamed tracked files from the
working directory also caused merge-recursive to delete untracked
files that were in the working directory.
The problem here is merge-recursive is deleting the working directory
file without regard for which branch it was associated with. What we
really want to do during a merge is to only delete files that were
renamed by the branch we are merging into the current branch,
and that are still tracked by the current branch. These files
definitely don't belong in the working directory anymore.
Anything else is either a merge conflict (already handled in other
parts of the code) or a file that is untracked by the current branch
and thus is not even participating in the merge. Its this latter
class that must be left alone.
For this fix to work we are now assuming that the first non-base
argument passed to git-merge-recursive always corresponds to the
working directory. This is already true for all in-tree callers
of merge-recursive. This assumption is also supported by the
long time usage message of "<base> ... -- <head> <remote>", where
"<head>" is implied to be HEAD, which is generally assumed to be
the current tree-ish.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The last test in t9200 wants to see if executable bit is
retained, which has no chance of succeeding on a filesystem that
does not handle executable bit correctly.
Signed-off-by: Junio C Hamano <junkio@cox.net>
For the purpose of this test we do not really care if the paths
are in latin-1, but people on Cygwin seem to be having problem
on foreign-looking pathnames that do not play well with their
locale.
Let's try to re-code them in UTF-8 and see who screams,
thanks, or reports no-improvements.
Signed-off-by: Junio C Hamano <junkio@cox.net>
git-fast-import requires use of inttypes.h, but the master branch has
added it to git-compat-util differently than git-fast-import originally
had used it. This merge back of master to the fast-import topic is to
get (and use) inttypes.h the way master is using it.
This is a partially evil merge to remove the call to setup_ident(),
as the master branch now contains a change which makes this implicit
and therefore removed the function declaration. (commit 01754769).
Conflicts:
git-compat-util.h
Do *NOT* try this on a repository you care about:
git pack-refs --all --prune
git pack-refs
because while the first "pack-refs" does the right thing, the second
pack-refs will totally screw you over.
This is because the second one tries to pack only tags; we should
also pack what are already packed -- otherwise we would lose them.
[jc: with an additional test]
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows transfer.unpackLimit to specify what these two
configuration variables want to set.
We would probably want to deprecate the two separate variables,
as I do not see much point in specifying them independently.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes git-fetch over git native protocol to automatically
decide to keep the downloaded pack if the fetch results in more
than 100 objects, just like receive-pack invoked by git-push
does. This logic is disabled when --keep is explicitly given
from the command line, so that a very small clone still keeps
the downloaded pack as before.
The 100 threshold can be adjusted with fetch.unpacklimit
configuration. We might want to introduce transfer.unpacklimit
to consolidate the two unpacklimit variables, which will be a
topic for the next patch.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Documentation/config.txt:
Variable value ending in a '`\`' is continued on the next line in the
customary UNIX fashion.
Test it.
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Commit c1a4278e switched the "merging checkout" implementation
from 3-way read-tree to merge-recursive, but forgot that
merge-recursive will signal an unmerged state with its own exit
status code. This prevented the clean-up phase (paths cleanly
merged should not be updated in the index) from running.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 9b088c4e39.
Protecting 'mature' objects does not make it any safer. We should
admit that git-prune is inherently unsafe when run in parallel with
other operations without involving unwarranted locking overhead,
and with the latest git, even rebase and reset would not immediately
create crufts anyway.
This option gives grace period to objects that are unreachable
from the refs from getting pruned.
The default value is 24 hours and may be changed using
gc.prunegrace.
Signed-off-by: Matthias Lederhofer <matled@gmx.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For example, it makes no sense to check the presence of a file
named "HEAD" when calling "git log HEAD" in a bare repository.
Noticed by Han-Wen Nienhuys.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
You can pass an extra argument to the function to receive the
reflog message information. Also when the log does not go back
beyond the point the user asked, the cut-off time and count are
given back to the caller for emitting the error messages as
appropriately.
We could later add configuration for get_sha1_basic() to make it
an error instead of it being just a warning.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Non-GNU touch do not have the -d option to take free form
date strings. The POSIX -t option should be more widespread.
For this to work, date needs to output YYYYMMDDHHMM.SS date strings.
Signed-off-by: Simon 'corecode' Schubert <corecode@fs.ei.tum.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Its very annoying to need to specify the file content ahead of a
commit and use marks to connect the individual blobs to the commit's
file modification entry, especially if the frontend can't/won't
generate the blob SHA1s itself. Instead it would much easier to
use if we can accept the blob data at the same time as we receive
each file_change line.
Now fast-import accepts 'inline' instead of a mark idnum or blob
SHA1 within the 'M' type file_change command. If an inline is
detected the very next line must be a 'data n' command, supplying
the file data.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
It is error prone to list the value of each file twice, instead we
should list the value only once early in the script and reuse the
shell variable when we need to access it.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Now that its easier to craft test cases (thanks to 'data <<')
we should start to verify fast-import works as expected.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
This adds --summary output in addition to the --stat to the
output from git-format-patch by default.
I think additions, removals and filemode changes are rare but
notable events and always showing it makes sense.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows "git checkout -m <other-branch>" to notice renames and
carry local changes in the working tree forward.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not all echos know -n. This was causing a test failure in
t5401-update-hooks.sh, but not t3800-mktag.sh for some reason.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
My bash refused to run the two scripts missing a #!, and it's
better to use the same line for all the scripts.
Signed-off-by: Jason Riedy <ejr@cs.berkeley.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes revert and cherry-pick to use merge-recursive, to
allow them to notice renames. A pair of test scripts
demonstrate that an old change before a rename happened can be
applied (reverted) after a rename with cherry-pick (with revert).
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/int:
More tests in t3901.
Consistent message encoding while reusing log from an existing commit.
t3901: test "format-patch | am" pipe with i18n
Use log output encoding in --pretty=email headers.
If the user doesn't have SVN::Core installed or working then the
SVN tests properly turn themselves off. But the user doesn't need
to know that SVN::Core isn't loadable as a Perl module. Unless of
course they are trying to debug the test, so lets relegate the Perl
failures to --verbose only.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds tests for "cherry-pick" and "rebase --merge" (and
indirectly "commit -C" since it is used in the latter) to make
sure they create a new commit with correct encoding.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This checks combinations of i18n.commitencoding (declares what
encoding you are feeding commit-tree to make commits) and
i18n.logoutputencoding (instructs what encoding to emit the
commit message out to log output, including e-mail format) to
make sure the "format-patch | am" pipe used in git-rebase works
correctly.
I suspect "git cherry-pick" and "git rebase --merge" may fail
similar tests. We'll see.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Some of the recent changes and shortcuts to the tests broke
things for people using older versions of svn:
t9104-git-svn-follow-parent.sh:
v1.2.3 (from SuSE 10.0 as reported by riddochc on #git
(thanks!)) required an extra 'svn up'. I was also able to
reproduce this with v1.1.4 (Debian Sarge).
lib-git-svn.sh:
SVN::Repos bindings in versions up to and including 1.1.4
(Sarge again) do not pass fs-config options to the underlying
library. BerkeleyDB repositories also seem completely broken
on all my Sarge machines; so not using FSFS does not seem to
be an option for most people.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
While 'init-db' still is and probably will always remain a valid git
command for obvious backward compatibility reasons, it would be a good
idea to move shipped tools and docs to using 'init' instead.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/detached-head:
git-checkout: handle local changes sanely when detaching HEAD
git-checkout: safety check for detached HEAD checks existing refs
git-checkout: fix branch name output from the command
git-checkout: safety when coming back from the detached HEAD state.
git-checkout: rewording comments regarding detached HEAD.
git-checkout: do not warn detaching HEAD when it is already detached.
Detached HEAD (experimental)
git-branch: show detached HEAD
git-status: show detached HEAD
Since c869753e, core.filemode is hardwired to false on Cygwin.
So this test had no chance to succeed, since an early commit
(changing just the filemode) failed, and therefore all subsequent
tests.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Suggested by Jakub Narebski <jnareb@gmail.com> on the list.
When we send a value to store_write_pair(), make sure that the value
that gets read out matches the one passed in. This means that for any
value that contains leading or trailing whitespace or any comment
character (# and ;), we need to surround it in quotes.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/reflog:
reflog --fix-stale: do not check the same trees and commits repeatedly.
reflog expire --fix-stale
Move traversal of reachable objects into a separate library.
builtin-prune: separate ref walking from reflog walking.
builtin-prune: make file-scope static struct to an argument.
When switching branches with "git checkout", we internally did $arg^0
(aka $arg^{commit}) suffix but there was no need to.
The improvement is easily visible in the change to an existing
test t/3200-branch.sh in this commit; it was expecting rather
ugly message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* sp/mmap: (27 commits)
Spell default packedgitlimit slightly differently
Increase packedGit{Limit,WindowSize} on 64 bit systems.
Update packedGit config option documentation.
mmap: set FD_CLOEXEC for file descriptors we keep open for mmap()
pack-objects: fix use of use_pack().
Fix random segfaults in pack-objects.
Cleanup read_cache_from error handling.
Replace mmap with xmmap, better handling MAP_FAILED.
Release pack windows before reporting out of memory.
Default core.packdGitWindowSize to 1 MiB if NO_MMAP.
Test suite for sliding window mmap implementation.
Create pack_report() as a debugging aid.
Support unmapping windows on 'temporary' packfiles.
Improve error message when packfile mmap fails.
Ensure core.packedGitWindowSize cannot be less than 2 pages.
Load core configuration in git-verify-pack.
Fully activate the sliding window pack access.
Unmap individual windows rather than entire files.
Document why header parsing won't exceed a window.
Loop over pack_windows when inflating/accessing data.
...
Conflicts:
cache.h
pack-check.c
The logic in an earlier round to detect reflog entries that
point at a broken commit was not sufficient. Just like we do
not trust presense of a commit during pack transfer (we trust
only our refs), we should not trust a commit's presense, even if
the tree of that commit is complete.
A repository that had reflog enabled on some of the refs that
was rewound and then run git-repack or git-prune from older
versions of git can have reflog entries that point at a commit
that still exist but lack commits (or trees and blobs needed for
that commit) between it and some commit that is reachable from
one of the refs.
This revamps the logic -- the definition of "broken commit"
becomes: a commit that is not reachable from any of the refs and
there is a missing object among the commit, tree, or blob
objects reachable from it that is not reachable from any of the
refs. Entries in the reflog that refer to such a commit are
expired.
Since this computation involves traversing all the reachable
objects, i.e. it has the same cost as 'git prune', it is enabled
only when a new option --fix-stale. Fortunately, once this is
run, we should not have to ever worry about missing objects,
because the current prune and pack-objects know about reflogs
and protect objects referred by them.
Unfortunately, this will be absolutely necessary to help people
migrate to the newer prune and repack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier test timestamp was too old; I forgot that the bare
unixtime integer had to be after Jan 1, 2000. This changes
test_tick to use the git-epoch timestamp.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This removes some unnecessary 'svn up' calls throughout
t9103-git-svn-graft-branches.sh:
* removed an 'svn log' call that was leftover from debugging
* removed multiple git-svn calls with a multi-init / multi-fetch
combination (which weren't tested before, either)
* replaced `rev-list ... | head -n1` with `rev-parse ...`
(not sure what I was thinking when I wrote that)
All this saves about 9 seconds from a test run
(53s -> 44s for 'make t91*') on my 1.3GHz Athlon
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We don't support the svn command-line client anymore; nor
do we support anything before SVN 1.1.0, so we can be certain
symlinks will be supported in the SVN repository.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We require the libraries now, so we can create repositories
using them (and save some executable load time while we're at
it).
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Verify that the update hooks work as documented/advertised. This is
a simple set of tests to check that the update hooks run with the
parameters expected, have their STDOUT and STDERR redirected to
the client side of the connection, and that their STDIN does not
contain any data (as its actually /dev/null).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master:
Documentation/config.txt (and repo-config manpage): mark-up fix.
Teach Git how to parse standard power of 2 suffixes.
Use /dev/null for update hook stdin.
Redirect update hook stdout to stderr.
Remove unnecessary argc parameter from run_command_v.
Automatically detect a bare git repository.
Replace "GIT_DIR" with GIT_DIR_ENVIRONMENT.
Use PATH_MAX constant for --bare.
Force core.filemode to false on Cygwin.
Fix formatting for urls section of fetch, pull, and push manpages
Fix yet another subtle xdl_merge() bug
i18n: drop "encoding" header in the output after re-coding.
commit-tree: cope with different ways "utf-8" can be spelled.
Move commit reencoding parameter parsing to revision.c
Documentation: minor rewording for git-log and git-show pages.
Documentation: i18n commit log message notes.
t3900: test log --encoding=none
commit re-encoding: fix confusion between no and default conversion.
Sometimes its necessary to supply a value as a power of two in a
configuration parameter. In this case the user may want to use the
standard suffixes such as K, M, or G to indicate that the numerical
value should be multiplied by a constant base before being used.
Shell scripts/etc. can also benefit from this automatic option
parsing with `git repo-config --int`.
[jc: with a couple of test and a slight input tightening]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is a basic set of tests for the sliding window mmap. We mostly
focus on the verify-pack and pack-objects implementations (including
delta reuse) as these commands appear to cover the bulk of the
affected portions of sha1_file.c.
The test cases don't verify the virtual memory size used, as
this can differ from system to system. Instead it just verifies
that we can run with very low values for core.packedGitLimit and
core.packedGitWindowSize.
Adding pack_report() to the end of both builtin-verify-pack.c and
builtin-pack-objects.c and manually inspecting the statistics output
can help to verify that the total virtual memory size attributed
to pack mmap usage is what one might expect on the current system.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When '*.ig' is ignored, and you have two files f.ig and d.ig/foo
in the working tree,
$ git add .
correctly ignored f.ig but failed to ignore d.ig/foo. This was
caused by a thinko in an earlier commit 4888c534, when we tried
to allow adding otherwise ignored files.
After reverting that commit, this takes a much simpler approach.
When we have an unmatched pathspec that talks about an existing
pathname, we know it is an ignored path the user tried to add,
so we include it in the set of paths directory walker returned.
This does not let you say "git add -f D" on an ignored directory
D and add everything under D. People can submit a patch to
further allow it if they want to, but I think it is a saner
behaviour to require explicit paths to be spelled out in such a
case.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Not that this reveals anything new, but I did test_tick shell
function in test-lib and found it rather cute and nice.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/utf8:
t3900: test conversion to non UTF-8 as well
Rename t3900 test vector file
UTF-8: introduce i18n.logoutputencoding.
Teach log family --encoding
i18n.logToUTF8: convert commit log message to UTF-8
Move encoding conversion routine out of mailinfo to utf8.c
Conflicts:
commit.c
In some environments, certain tests have no way of succeeding
due to platform limitation, such as lack of 'unzip' program, or
filesystem that do not allow arbitrary sequence of non-NUL bytes
as pathnames.
You should be able to say something like
$ cd t
$ GIT_SKIP_TESTS=t9200.8 t9200-git-cvsexport-commit.sh
and even:
$ GIT_SKIP_TESTS='t[0-4]??? t91?? t9200.8' make test
to omit such tests. The value of the environment variable is a
SP separated list of patterns that tells which tests to skip,
and either can match the "t[0-9]{4}" part to skip the whole
test, or t[0-9]{4} followed by ".$number" to say which
particular test to skip.
Note that some tests in the existing test suite rely on previous
test item, so you cannot arbitrarily disable one and expect the
remainder of test to check what the test originally was intended
to check.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The function xdl_refine_conflicts() tries to break down huge
conflicts by doing a diff on the conflicting regions. However,
this does not make sense when one side is empty.
Worse, when one side is not only empty, but after EOF, the code
accessed unmapped memory.
Noticed by Luben Tuikov, Shawn Pearce and Alexandre Julliard, the
latter providing a test case.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We have less code to worry about now. As a bonus, --revision
can be used to reliably skip parts of history whenever fetch is
run, not just the first time. I'm not sure why anybody would
want to skip history in the middle, however...
For people (nearly everyone at the moment) without the
do_switch() function in their Perl SVN library, the entire tree
must be refetched if --follow-parent is used and a parent is
found. Future versions of SVN will have a working do_switch()
function accessible via Perl.
Accessing repositories on the local machine (especially file://
ones) is also slightly slower as a result; but I suspect most
git-svn users will be using it to access remote repositories.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I don't think anybody running tests needs to know they're
running init-db and creating a repository for testing.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
We get an extra measure of error checking here as well.
While we're at it, also removed a less portable use of export.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It appears ISO-2022-JP is more widely accepted than ISO2022JP, so
rename it that way. We probably would need to have a way to skip
this test altogether in locale-challenged environments.
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is plausible for somebody to want to view the commit log in a
different encoding from i18n.commitencoding -- the project's
policy may be UTF-8 and the user may be using a commit message
hook to run iconv to conform to that policy (and either not have
i18n.commitencoding to default to UTF-8 or have it explicitly
set to UTF-8). Even then, Latin-1 may be more convenient for
the usual pager and the terminal the user uses.
The new variable i18n.logoutputencoding is used in preference to
i18n.commitencoding to decide what encoding to recode the log
output in when git-log and friends formats the commit log message.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is to adjust to:
count-objects -v: show number of packs as well.
which will break a test in this series.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The latest changes to git-commit have made it more verbose; and
I was running the setup of the tests outside of the test_expect_*,
so errors in those were not caught. Now we move them to where
they can be eval'ed and have their output trapped.
export var=value has been removed
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Displaying the SHA1 of 'their' branch (the branch being merged into
the current branch) is not nearly as friendly as just displaying
the name of that branch, especially if that branch is already local
to this repository.
git-merge now sets the environment variable 'GITHEAD_%(sha1)=%(name)'
for each argument it gets passed, making the actual input name that
resolved to the commit '%(sha1)' easily available to the invoked
merge strategy.
git-merge-recursive makes use of these environment variables when
they are available by using '%(name)' whenever it outputs the commit
identification rather than '%(sha1)'. This is most obvious in the
conflict hunks created by xdl_merge:
$ git mege sideb~1
<<<<<<< HEAD:INSTALL
Good!
=======
Oops.
>>>>>>> sideb~1:INSTALL
[jc: adjusted a test script and a minor constness glitch.]
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This adds --skip=<n> option to revision traversal machinery.
Documentation and test were added by Robert Fitzsimons.
Signed-off-by: Robert Fitzsimons <robfitz@273k.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Because we do not use --no-separate-remote anymore, there is no
reason to create that directory from the template.
t5510 test is updated to test both $GIT_DIR/remotes/ based
configuration and $GIT_DIR/config variable (credits to
Johannes).
Signed-off-by: Junio C Hamano <junkio@cox.net>
Instead of passing --template explicitely to init-db and clone, you can
just set the environment variable GIT_TEMPLATE_DIR.
Also make use of it in the tests, to make sure that the templates are
copied.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This reverts commit 74d20040ca.
Version from Johannes to introduce GIT_TEMPLATE_DIR is simpler,
although I unconsciously stayed away from introducing yet another
environment variable.
The initial t/trash repository for testing was created properly
but over time we gained many tests that create secondary test
repositories with init-db or clone and they were not careful
enough.
This fixes it.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When replacing an existing file A with a directory A that has a
file A/B in it in the index, 'update-index --replace --add A/B'
did not properly remove the file to make room for the new
directory.
There was a trivial logic error, most likely a cut & paste one,
dating back to quite early days of git.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When renaming a branch, the corresponding config section should
be renamed, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Given a config like this:
# A config
[very.interesting.section]
not
The command
$ git repo-config --rename-section very.interesting.section bla.1
will lead to this config:
# A config
[bla "1"]
not
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
'set-tree' probably accurately describes what the command
formerly known as 'commit' does.
I'm not entirely sure that 'dcommit' should be renamed to 'commit'
just yet... Perhaps 'push' or 'push-changes'?
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Using the command-line client was great for prototyping and
getting something working quickly. Eventually I found time
to study the library documentation and add support for using
the libraries which are much faster and more flexible when
it comes to supporting new features.
Note that we require version 1.1 of the SVN libraries, whereas
we supported the command-line svn client down to version 1.0.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
For multivars, the "git-repo-config name value ^$" is useful but
nonintuitive and troublesome to do repeatedly (since the value is not
at the end of the command line). This commit simply adds an --add
option that adds a new value to a multivar. Particularly useful for
tracking a new branch on a remote:
git-repo-config --add remote.origin.fetch +next:origin/next
Includes documentation and test.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
New and experienced Git users alike are finding out too late that
they forgot to enable reflogs in the current repository, and cannot
use the information stored within it to recover from an incorrectly
entered command such as `git reset --hard HEAD^^^` when they really
meant HEAD^^ (aka HEAD~2).
So enable reflogs by default in all future versions of Git, unless
the user specifically disables it with:
[core]
logAllRefUpdates = false
in their .git/config or ~/.gitconfig.
We only enable reflogs in repositories that have a working directory
associated with them, as shared/bare repositories do not have
an easy means to prune away old log entries, or may fail logging
entirely if the user's gecos information is not valid during a push.
This heuristic was suggested on the mailing list by Junio.
Documentation was also updated to indicate the new default behavior.
We probably should start to teach usuing the reflog to recover
from mistakes in some of the tutorial material, as new users are
likely to make a few along the way and will feel better knowing
they can recover from them quickly and easily, without fsck-objects'
lost+found features.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It is nicer to let the user know when a commit succeeded all the time,
not only the first time. Also the commit sha1 is much more useful than
the tree sha1 in this case.
This patch also introduces a -q switch to supress this message as well
as the summary of created/deleted files.
Signed-off-by: Nicolas Pitre <nico@cam.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/read-tree-ignore:
read-tree: document --exclude-per-directory
Loosen "working file will be lost" check in Porcelain-ish
read-tree: further loosen "working file will be lost" check.
* lh/branch-rename:
git-branch: let caller specify logmsg
rename_ref: use lstat(2) when testing for symlink
git-branch: add options and tests for branch renaming
Conflicts:
builtin-branch.c
* js/merge:
merge-recursive: add/add really is modify/modify with an empty base
Get rid of the dependency on RCS' merge program
merge-file: support -p and -q; fix compile warnings
Add builtin merge-file, a minimal replacement for RCS merge
xdl_merge(): fix and simplify conflict handling
xdl_merge(): fix thinko
xdl_merge(): fix an off-by-one bug
merge-recursive: use xdl_merge().
xmerge: make return value from xdl_merge() more usable.
xdiff: add xdl_merge()
Prior to 65ac6e9c3f we deleted a file
from the working directory during a merge if the file existed before
the merge started but was renamed by the branch being merged in.
This broke in 65ac6e as git-merge-recursive did not actually update
the working directory on an uncontested rename.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Unify the handling for cases C (add/add) and D (modify/modify).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (42 commits)
git-svn: correctly handle packed-refs in refs/remotes/
add test case for recursive merge
git-svn: correctly display fatal() error messages
git-svn: allow dcommit to take an alternate head
git-svn: enable logging of information not supported by git
Clarify fetch error for missing objects.
Move Fink and Ports check to after config file
shortlog: fix segfault on empty authorname
shortlog: remove "[PATCH]" prefix from shortlog output
Make sure the empty tree exists when needed in merge-recursive.
Don't use memcpy when source and dest. buffers may overlap
no need to install manpages as executable
Documentation: simpler shared repository creation
shortlog: fix segfault on empty authorname
Add branch.*.merge warning and documentation update
Fix perl/ build.
git-svn: use do_switch for --follow-parent if the SVN library supports it
Fix documentation copy&paste typo
git-svn: extra error check to ensure we open a file correctly
Documentation: update git-clone man page with new behavior
...
Now that we have git-merge-file, an RCS merge lookalike, we no longer
need it. So long, merge, and thanks for all the fish!
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This test case is based on the bug report by Shawn Pearce.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch uses git-apply to do the patching which simplifies the code a lot
and also uses one pass to git-diff. git-apply gives information on added,
removed files as well as which files are binary.
Removed the test for checking for matching binary files when deleting them
since git-apply happily deletes the file. This is matter of taste since we
allow some fuzz for text patches also.
Error handling was cleaned up, but not much tested.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
merge-file has the same syntax as RCS merge, but supports only the
"-L" option.
For good measure, a test is added, which is quite minimal, though.
[jc: further fix for compliation errors included.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The current check for symlinked reflogs was based on stat(2), which is
utterly embarrassing.
Fix it, and add a matching testcase.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Extend git-branch with the following options:
git-branch -m|-M [<oldbranch>] newbranch
The -M variation is required to force renaming over an exsisting
branchname.
This also indroduces $GIT_DIR/RENAME_REF which is a "metabranch"
used when renaming branches. It will always hold the original sha1
for the latest renamed branch.
Additionally, if $GIT_DIR/logs/RENAME_REF exists, all branch rename
events are logged there.
Finally, some testcases are added to verify the new options.
Signed-off-by: Lars Hjemli <hjemli@gmail.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This follows up commit ed93b449 where we removed overcautious
"working file will be lost" check.
A new option "--exclude-per-directory=.gitignore" can be used to
tell the "git-read-tree" command that the user does not mind
losing contents in untracked files in the working tree, if they
need to be overwritten by a merge (either a two-way "switch
branches" merge, or a three-way merge).
Signed-off-by: Junio C Hamano <junkio@cox.net>
This is _not_ the same as "treat eol as whitespace", since that would mean
that multiple empty lines would be treated as equal to e.g. a space.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
receive-pack: do not insist on fast-forward outside refs/heads/
git-mv: search more precisely for source directory in index
Conflicts:
receive-pack.c
Otherwise, an executable script in git would end up being
checked into the CVS repository without the execute bit.
[jc: with an additional test script from Robin Rosenberg.]
Signed-off-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
A move of a directory should find the entries in the index by
searching for the name _including_ the slash. Otherwise, the
directory can be shadowed by a file when it matches the prefix
and is lexicographically smaller, e.g. "ab.c" shadows "ab/".
Noticed by Sergey Vlasov.
[jc: added Sergey's original reproduction recipe as a test case
at the end of t7001.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* Enable test for delta transfers in full-svn-test.
* Run tests against the root of the repository so we won't have
to revisit 308906fa6e and
efe4631def again.
The graft-branches test still runs as before.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* branch 'jc/merge':
git-merge: do not leak rev-parse output used for checking internally.
git-merge: tighten error checking.
merge: allow merging into a yet-to-be-born branch.
git-merge: make it usable as the first class UI
remove merge-recursive-old
This allows you to say
git send-pack $URL :refs/heads/$branch
to delete the named remote branch. The refspec $src:$dst means
replace the destination ref with the object known as $src on the
local side, so this is a natural extension to make an empty $src
mean "No object" to delete the target.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows one to see a root commit as a diff in commands like git-log,
git-show and git-whatchanged.
Signed-off-by: Peter Baumann <Peter.B.Baumannn@stud.informatik.uni-erlangen.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
An earlier commit f28b34a broke symlinks when trust-executable-bit
is not set because it incorrectly assumed that everything was a
regular file.
Reported by Juergen Ruehle.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This side-ports commit fd19f620 from Cogito, in which I fixed
exactly the same bug. Somehow nobody noticed this for a long
time in git.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We used to complain that we cannot merge anything we fetched
with a local branch that does not exist yet. Just treat the
case as a natural extension of fast forwarding and make the
local branch'es tip point at the same commit we just fetched.
After all an empty repository without an initial commit is an
ancestor of any commit.
[jc: I added a trivial test. We've become sloppy but we should
stick to the discipline of covering new behaviour with new
tests. ]
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Rework cvsexportcommit to handle binary files for all cases.
Catch errors when writing an index that contains invalid objects.
test-lib.sh: A command dying due to a signal is an unexpected failure.
git-update-index(1): fix use of quoting in section title
Also adds test cases for adding removing and deleting
binary and text files plus two tests for the checks on
binary files.
Signed-off-by: Robin Rosenberg <robin.rosenberg@dewire.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If git-write-index is called without --missing-ok, it reports invalid
objects that it finds in the index. But without this patch it dies
right away or may run into an infinite loop.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When test_expect_failure detects that a command failed, it still has to
treat a program that crashed from a signal as unexpected failure.
Signed-off-by: Johannes Sixt <johannes.sixt@telecom.at>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-rebase: Use --ignore-if-in-upstream option when executing git-format-patch.
git-svn: fix dcommit losing changes when out-of-date from svn
git-svn: don't die on rebuild when --upgrade is specified
git-svn: avoid printing filenames of files we're not tracking
There was a bug in dcommit (and commit-diff) which caused deltas
to be generated against the latest version of the changed file
in a repository, and not the revision we are diffing (the tree)
against locally.
This bug can cause recent changes to the svn repository to be
silently clobbered by git-svn if our repository is out-of-date.
Thanks to Steven Grimm for noticing the bug.
The (few) people using the commit-diff command are now required
to use the -r/--revision argument. dcommit usage is unchanged.
Signed-off-by: Eric Wong <normalperson@yhbt.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just make it take over blame's place. Documentation and command
have all stopped mentioning "git-pickaxe". The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/read-tree:
t6022: ignoring untracked files by merge-recursive when they do not matter
merge-recursive: adjust to loosened "working file clobbered" check
merge-recursive: make a few functions static.
merge-recursive: use abbreviated commit object name.
merge: loosen overcautious "working file will be lost" check.
* lj/refs: (63 commits)
Fix show-ref usagestring
t3200: git-branch testsuite update
sha1_name.c: avoid compilation warnings.
Make git-branch a builtin
ref-log: fix D/F conflict coming from deleted refs.
git-revert with conflicts to behave as git-merge with conflicts
core.logallrefupdates thinko-fix
git-pack-refs --all
core.logallrefupdates create new log file only for branch heads.
Remove bashism from t3210-pack-refs.sh
ref-log: allow ref@{count} syntax.
pack-refs: call fflush before fsync.
pack-refs: use lockfile as everybody else does.
git-fetch: do not look into $GIT_DIR/refs to see if a tag exists.
lock_ref_sha1_basic does not remove empty directories on BSD
Do not create tag leading directories since git update-ref does it.
Check that a tag exists using show-ref instead of looking for the ref file.
Use git-update-ref to delete a tag instead of rm()ing the ref file.
Fix refs.c;:repack_without_ref() clean-up path
Clean up "git-branch.sh" and add remove recursive dir test cases.
...
The three-way merge complained unconditionally when a path that
does not exist in the index is involved in a merge when it
existed in the working tree. If we are merging an old version
that had that path tracked, but the path is not tracked anymore,
and if we are merging that old version in, the result will be
that the path is not tracked. In that case we should not
complain.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
xdiff: Match GNU diff behaviour when deciding hunk comment worthiness of lines
Update cherry documentation.
Refer to git-rev-parse:Specifying Revisions from git.txt
git-fetch.sh printed protocol fix
RPM package re-classification.
Documentation: note about contrib/.
git-svn: fix symlink-to-file changes when using command-line svn 1.4.0
Set $HOME for selftests
The test expected "git branch --help" to exit successfully, but
built-ins spawn "man" when given --help, and when the test is
run, manpages may not be installed yet and "man" can legally
exit non-zero in such a case.
Also the new implementation logs "Created from master", instead
of "Created from HEAD" in the reflog, which makes a lot more
sense, so adjust the test to match that.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Currently it does what git-blame does, but only faster.
More importantly, its internal structure is designed to support
content movement (aka cut-and-paste) more easily by allowing
more than one paths to be taken from the same commit.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The latest GNU diff from CVS emits an empty line to express
an empty context line, instead of more traditional "single
white space followed by a newline". Do not get broken by it.
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
After deleting a branch l/k, you should be able to create a
branch l. Earlier we added remove_empty_directories() on the
ref creation side to remove leftover .git/refs/l directory but
we also need a matching code to remove .git/logs/refs/l
directory.
Signed-off-by: Junio C Hamano <junkio@cox.net>
the repository argument for git-clone should be relative to $PWD
instead of the given target directory. The old behavior gave us
surprising success and you need a few minute to know why it worked.
GIT_DIR is already exported so no need to cd into $D. And this makes
$PWD for git-fetch-pack, which is the actual command to take the given
repository dir, the same as git-clone.
Signed-off-by: Yasushi SHOJI <yashi@atmark-techno.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When whitespace or whitespace change was ignored, the function
xdl_recmatch() returned memcmp() style differences, which is wrong,
since it should return 0 on non-match.
Also, there were three horrible off-by-one bugs, even leading to wrong
hashes in the whitespace special handling.
The issue was noticed by Ray Lehtiniemi.
For good measure, this commit adds a test.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This changes 'git-pack-refs' to pack only tags by default.
Branches are meant to be updated, either by committing onto it
yourself or tracking remote branches, and packed entries can
become stale easily, but tags are usually "create once and live
forever" and benefit more from packing.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add symlink support to ZIP file creation, and a few tests.
This implementation sets the "version made by" field
(creator_version) to Unix for symlinks, only; regular files and
directories are still marked as originating from FAT/VFAT/NTFS.
Also set "external file attributes" (attr2) to 0 for regular
files and 16 for directories (FAT attribute), and to the file
mode for symlinks.
We could always set the creator_version to Unix and include the
mode, but then Info-ZIP unzip would set the mode of the extracted
files to *exactly* the value stored in attr2. The FAT trick
makes it apply the umask instead. Note: FAT has no executable
bit, so this information is not stored in the ZIP file.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When running tests with --verbose it is difficult to see where
one test starts and where it ends because everything is printed
in one big lump.
Fix that by printing one single newline between each test.
Signed-off-by: Martin Waitz <tali@admingilde.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This bashism makes the test fail if /bin/sh is not bash.
Signed-off-by: Dennis Stosberg <dennis@stosberg.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This makes "git log/diff --summary" imply recursive behaviour,
whose effect is summarized in one test output:
--- a/t/t4013/diff.diff-tree_--pretty_--root_--summary_initial
+++ b/t/t4013/diff.diff-tree_--pretty_--root_--summary_initial
@@ -5,7 +5,7 @@ Date: Mon Jun 26 00:00:00 2006 +0000
Initial
- create mode 040000 dir
+ create mode 100644 dir/sub
create mode 100644 file0
create mode 100644 file2
$
When a file is created in a subdirectory, we used to say just
the directory name only when that directory also was created,
which did not make sense from two reasons. It is not any more
significant to create a new file in a new directory than to
create a new file in an existing directory, and even if it were,
reportinging the new directory name without saying the actual
filename is not useful.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (99 commits)
lock_ref_sha1_basic does not remove empty directories on BSD
git-push: .git/remotes/ file does not require SP after colon
git-mv: invalidate the removed path properly in cache-tree
Makefile: install and clean merge-recur, still.
GIT 1.4.3-rc1
gitweb: tree view: hash_base and hash are now context sensitive
git-diff -B output fix.
fetch: Reset remote refs list each time fetch_main is called
Remove -fPIC which was only needed for Git.xs
Fix approxidate() to understand 12:34 AM/PM are 00:34 and 12:34
git-diff -B output fix.
Make cvsexportcommit remove files.
diff --stat: ensure at least one '-' for deletions, and one '+' for additions
diff --stat=width[,name-width]: allow custom diffstat output width.
gitweb: History: blob and tree are first, then commitdiff, etc
gitweb: Remove redundant "commit" from history
http/ftp: optionally ask curl to not use EPSV command
gitweb: Don't use quotemeta on internally generated strings
gitweb: Add snapshot to shortlog
gitweb: Factor out gitweb_have_snapshot()
...
The command updated the cache without invalidating the cache
tree entries while removing an existing entry.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that directory recursive remove works in the core C code, we
don't need to do it in "git-branch.sh".
Also add test cases to check that directory recursive remove will
continue to work.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* jc/gitpm: (52 commits)
Remove -fPIC which was only needed for Git.xs
Git.pm: Kill Git.xs for now
Revert "Make it possible to set up libgit directly (instead of from the environment)"
Revert "Git.pm: Introduce fast get_object() method"
Revert "Convert git-annotate to use Git.pm"
Fix compilation with Sun CC
pass DESTDIR to the generated perl/Makefile
Eliminate Scalar::Util usage from private-Error.pm
Convert git-annotate to use Git.pm
Git.pm: Introduce fast get_object() method
Make it possible to set up libgit directly (instead of from the environment)
Work around sed and make interactions on the backslash at the end of line.
Git.pm: Introduce ident() and ident_person() methods
Convert git-send-email to use Git.pm
Git.pm: Add config() method
Use $GITPERLLIB instead of $RUNNING_GIT_TESTS and centralize @INC munging
INSTALL: a tip for running after building but without installing.
Perly Git: make sure we do test the freshly built one.
Git.pm: Don't #define around die
Git.xs: older perl do not know const char *
...
Some of these test cases are from Junio.
One test case is commented out because it doesn't work right now.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (72 commits)
runstatus: do not recurse into subdirectories if not needed
grep: fix --fixed-strings combined with expression.
grep: free expressions and patterns when done.
Corrected copy-and-paste thinko in ignore executable bit test case.
An illustration of rev-list --parents --pretty=raw
Allow git-checkout when on a non-existant branch.
gitweb: Decode long title for link tooltips
git-svn: Fix fetch --no-ignore-externals with GIT_SVN_NO_LIB=1
Ignore executable bit when adding files if filemode=0.
Remove empty ref directories that prevent creating a ref.
Use const for interpolate arguments
git-archive: update documentation
Deprecate merge-recursive.py
gitweb: fix over-eager application of esc_html().
Allow '(no author)' in git-svn's authors file.
Allow 'svn fetch' on '(no date)' revisions in Subversion.
git-repack: allow git-repack to run in subdirectory
Remove upload-tar and make git-tar-tree a thin wrapper to git-archive
git-tar-tree: Move code for git-archive --format=tar to archive-tar.c
git-tar-tree: Remove duplicate git_config() call
...
This test should be testing update-index --add, not git-add as the
latter is implemented in terms of the former.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This script creates two separate histories, A and B, each of
which does:
(A0, B0): create fileA and subdir/fileB
(A1, B1): modify fileA
(A2, B2): modify subdir/fileB
and then grafts them together to make B0 a child of A2. So
the final history looks like (time flows from top to bottom):
true parent touches subdir?
A0 none yes (creates it)
A1 A0 no
A2 A1 yes
B0 none yes (different from what's in A2)
B1 B0 no
B2 B1 yes
"git rev-list --parents --pretty=raw B2" would give "fake"
parents on the "commit " header lines while "parent " header
lines show the parent as recorded in the commit object (i.e. B0
appears to have A2 as its parent on "commit " header but there
is no "parent A2" header line in it).
When you have path limiters, we simplify history to omit
commits that do not affect the specified paths.
So "git rev-list --parents --pretty=raw B2 subdir" would return
"B2 B0 A2 A0" (because B1 and A1 do not touch the path). When
it does so, the "commit " header lines have "fake" parents
(i.e. B2 appears to have B0 as its parent on "commit " header),
but you can still get the true parents by looking at "parent "
header.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I've seen some users get into situtations where their HEAD
symbolic-ref is pointing at a non-existant ref. (Sometimes this
happens during clone when the remote repository lacks a 'master'
branch.) If this happens the user is unable to use git-checkout
to switch branches as there is no prior commit to merge from.
So instead of giving the user low-level errors about how HEAD
can't be resolved and how not a single revision was given change
the type of checkout to be a force and go through with the user's
request anyway.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
If the user has configured core.filemode=0 then we shouldn't set
the execute bit in the index when adding a new file as the user
has indicated that the local filesystem can't be trusted.
This means that when adding files that should be marked executable
in a repository with core.filemode=0 the user must perform a
'git update-index --chmod=+x' on the file before committing the
addition.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch also adds test cases from Linus and Junio.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This renames merge-recursive written in Python to merge-recursive-old,
and makes merge-recur as a synonym to merge-recursive. We do not remove
merge-recur yet, but we will remove merge-recur and merge-recursive-old
in a few releases down the road.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When there are single-character filenames in the test directory,
the shell tries to expand regexps meant for tr.
Signed-off-by: Junio C Hamano <junkio@cox.net>
[jc: with a fix to config handling in t5400 test, which took
annoyingly long to diagnose.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
It depended on specific error messages to detect failure but the
implementation changed and broke the test. This fixes the breakage
minimally.
Signed-off-by: Junio C Hamano <junkio@cox.net>
In "git-apply", we have a few sanity checks and heuristics that
expects that the patch fed to us is a unified diff with at least
one line of context.
* When there is no leading context line in a hunk, the hunk
must apply at the beginning of the preimage. Similarly, no
trailing context means that the hunk is anchored at the end.
* We learn a patch deletes the file from a hunk that has no
resulting line (i.e. all lines are prefixed with '-') if it
has not otherwise been known if the patch deletes the file.
Similarly, no old line means the file is being created.
And we declare an error condition when the file created by a
creation patch already exists, and/or when a deletion patch
still leaves content in the file.
These sanity checks are good safety measures, but breaks down
when people feed a diff generated with --unified=0. This was
recently noticed first by Matthew Wilcox and Gerrit Pape.
This adds a new flag, --unified-zero, to allow bypassing these
checks. If you are in control of the patch generation process,
you should not use --unified=0 patch and fix it up with this
flag; rather you should try work with a patch with context. But
if all you have to work with is a patch without context, this
flag may come handy as the last resort.
Signed-off-by: Junio C Hamano <junkio@cox.net>
I had a hard time figuring out why this test was failing with
the packed-refs update without running it under "sh -x". This
makes output from "sh t1400-update-ref.sh -v" more descriptive.
Updating other tests would be a good janitorial task.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Historically we did not allow binary patch applied without an
explicit permission from the user, and this flag was the way to
do so. This makes the flag a no-op by always allowing binary
patch application.
Signed-off-by: Junio C Hamano <junkio@cox.net>
If GIT_TRACE is set to an absolute path (starting with a
'/' character), we interpret this as a file path and we
trace into it.
Also if GIT_TRACE is set to an integer value greater than
1 and lower than 10, we interpret this as an open fd value
and we trace into it.
Note that this behavior is not compatible with the
previous one.
We also trace whole messages using one write(2) call to
make sure messages from processes do net get mixed up in
the middle.
This patch makes it possible to get trace information when
running "make test".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The intention of the test seems to be to build a long chain of
clones that locally borrow objects from their parents and see the
system give up dereferencing long chains. There were two problems:
(1) it did not test the right repository;
(2) it did not build a chain long enough to trigger the limitation.
I do not think it is a good test to make sure the limitation the
current implementation happens to have still exists, but that is
a topic at a totally different level.
At least this fixes the broken test.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Since the normalized basename of "." is "", the check for directory
failed erroneously.
Noticed by Fredrik Kuivinen.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
With the new flag "--reject", hunks that do not apply are sent to
the standard output, and the usable hunks are applied. The command
itself exits with non-zero status when this happens, so that the
user or wrapper can take notice and sort the remaining mess out.
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
finish_connect(): thinkofix
git-mv: succeed even if source is a prefix of destination
Solaris does not support C99 format strings before version 10
As noted by Fredrik Kuivinen, without this patch, git-mv fails on
git-mv README README-renamed
because "README" is a prefix of "README-renamed".
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* master: (166 commits)
git-apply --binary: clean up and prepare for --reverse
Fix detection of ipv6 on Solaris
Look for sockaddr_storage in sys/socket.h
Solaris has strlcpy() at least since version 8
git-apply --reverse: simplify reverse option.
t4116 apply --reverse test
Make sha1flush void and remove conditional return.
Make upload_pack void and remove conditional return.
Make track_tree_refs void.
Make pack_objects void.
Make fsck_dir void.
Make checkout_all void.
Make show_entry void
Make pprint_tag void and cleans up call in cmd_cat_file.
Remove combine-diff.c::uninteresting()
read-cache.c cleanup
http-push.c cleanup
diff.c cleanup
builtin-push.c cleanup
builtin-grep.c cleanup
...
