This should improve readability. Compare "thislongname" and
"thisLongName". The following keys are left in unchanged. We can
decide what to do with them later.
- am.keepcr
- core.autocrlf .safecrlf .trustctime
- diff.dirstat .noprefix
- gitcvs.usecrlfattr
- gui.blamehistoryctx .trustmtime
- pull.twohead
- receive.autogc
- sendemail.signedoffbycc .smtpsslcertpath .suppresscc
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add an option to format-patch for reading a signature from a file.
$ git format-patch -1 --signature-file=$HOME/.signature
The config variable `format.signaturefile` can also be used to make
this the default.
$ git config format.signaturefile $HOME/.signature
$ git format-patch -1
Signed-off-by: Jeremiah Mahler <jmmahler@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The Thunderbird section of the 'MUA-specific hints' contains three
different approaches to setting up the mail client to leave patch
emails unmolested. The second approach (configuration) has a step
missing when configuring the composition window not to wrap. In
particular, the "mailnews.wraplength" configuration variable needs
to be set to zero. Update the documentation to add the missing
setting.
Signed-off-by: Ramsay Jones <ramsay@ramsay1.demon.co.uk>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
This patch allows users to use the short form -q on
log and format-patch, which was non possible before.
Also the documentation of format-patch mentions -q now.
The documentation of log doesn't even talk about --quiet, so I'll leave
that for more experienced git contributors. ;)
It doesn't seem to change the default behavior, but in combination
with --stat for example it suppresses the actual stats.
however the only relevant code in log is
if (quiet)
rev->diffopt.output_format |= DIFF_FORMAT_NO_OUTPUT;
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Format-patch generates emails with the "From" address set to the
author of each patch. If you are going to send the emails, however,
you would want to replace the author identity with yours (if they
are not the same), and bump the author identity to an in-body
header.
Normally this is handled by git-send-email, which does the
transformation before sending out the emails. However, some
workflows may not use send-email (e.g., imap-send, or a custom
script which feeds the mbox to a non-git MUA). They could each
implement this feature themselves, but getting it right is
non-trivial (one must canonicalize the identities by reversing any
RFC2047 encoding or RFC822 quoting of the headers, which has caused
many bugs in send-email over the years).
This patch takes a different approach: it teaches format-patch a
"--from" option which handles the ident check and in-body header
while it is writing out the email. It's much simpler to do at this
level (because we haven't done any quoting yet), and any workflow
based on format-patch can easily turn it on.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also, add a new option: 'auto', so if there's more than one patch, the
cover letter is generated, otherwise it's not.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Teach "format-patch" to prefix v4- to its output files for the
fourth iteration of a patch series, to make it easier for the
submitter to keep separate copies for iterations.
* jc/format-patch-reroll:
format-patch: give --reroll-count a short synonym -v
format-patch: document and test --reroll-count
format-patch: add --reroll-count=$N option
get_patch_filename(): split into two functions
get_patch_filename(): drop "just-numbers" hack
get_patch_filename(): simplify function signature
builtin/log.c: stop using global patch_suffix
builtin/log.c: drop redundant "numbered_files" parameter from make_cover_letter()
builtin/log.c: drop unused "numbered" parameter from make_cover_letter()
Accept "-v" as a synonym to "--reroll-count", so that users can say
"git format-patch -v4 master", instead of having to fully spell it
out as "git format-patch --reroll-count=4 master".
As I do not think of a reason why users would want to tell the
command to be "verbose", I think this should be OK.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove double negative, and include the repeat usage across
versions of a patch series.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Signed-off-by: Jeff King <peff@peff.net>
Even though I coded this, I am not sure what use scenarios would benefit
from this option, so the description is unnecessarily negative at this
moment. People who do want to use this feature need to come up with a
more plausible use case and replace it.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The discussion of email subject throughout the documentation is
misleading; it indicates that the first line will always become
the subject. In fact, the subject is generally all lines up until
the first full blank line.
This patch refines that, and makes more use of the concept of a
commit title, with the title being all text up to the first blank line.
Signed-off-by: Jeremy White <jwhite@codeweavers.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In asciidoc 7, backticks like `foo` produced a typographic
effect, but did not otherwise affect the syntax. In asciidoc
8, backticks introduce an "inline literal" inside which markup
is not interpreted. To keep compatibility with existing
documents, asciidoc 8 has a "no-inline-literal" attribute to
keep the old behavior. We enabled this so that the
documentation could be built on either version.
It has been several years now, and asciidoc 7 is no longer
in wide use. We can now decide whether or not we want
inline literals on their own merits, which are:
1. The source is much easier to read when the literal
contains punctuation. You can use `master~1` instead
of `master{tilde}1`.
2. They are less error-prone. Because of point (1), we
tend to make mistakes and forget the extra layer of
quoting.
This patch removes the no-inline-literal attribute from the
Makefile and converts every use of backticks in the
documentation to an inline literal (they must be cleaned up,
or the example above would literally show "{tilde}" in the
output).
Problematic sites were found by grepping for '`.*[{\\]' and
examined and fixed manually. The results were then verified
by comparing the output of "html2text" on the set of
generated html pages. Doing so revealed that in addition to
making the source more readable, this patch fixes several
formatting bugs:
- HTML rendering used the ellipsis character instead of
literal "..." in code examples (like "git log A...B")
- some code examples used the right-arrow character
instead of '->' because they failed to quote
- api-config.txt did not quote tilde, and the resulting
HTML contained a bogus snippet like:
<tt><sub></tt> foo <tt></sub>bar</tt>
which caused some parsers to choke and omit whole
sections of the page.
- git-commit.txt confused ``foo`` (backticks inside a
literal) with ``foo'' (matched double-quotes)
- mentions of `A U Thor <author@example.com>` used to
erroneously auto-generate a mailto footnote for
author@example.com
- the description of --word-diff=plain incorrectly showed
the output as "[-removed-] and {added}", not "{+added+}".
- using "prime" notation like:
commit `C` and its replacement `C'`
confused asciidoc into thinking that everything between
the first backtick and the final apostrophe were meant
to be inside matched quotes
- asciidoc got confused by the escaping of some of our
asterisks. In particular,
`credential.\*` and `credential.<url>.\*`
properly escaped the asterisk in the first case, but
literally passed through the backslash in the second
case.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The negated forms introduced in c426003 (format-patch: add --no-cc,
--no-to, and --no-add-headers, 2010-03-07) were not documented
anywhere. Add them to the descriptions of the positive forms.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/format-patch-doc:
Documentation/format-patch: suggest Toggle Word Wrap add-on for Thunderbird
Documentation: publicize hints for sending patches with GMail
Documentation: publicize KMail hints for sending patches inline
Documentation: hints for sending patches inline with Thunderbird
Documentation: explain how to check for patch corruption
Of the (now) three methods to send unmangled patches using Thunderbird,
this method is listed first because it provides a single-click on-demand
option rather than a permanent change of configuration like the other
two methods.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The hints in SubmittingPatches about stopping GMail from clobbering
patches are widely useful both as examples of "git send-email" and
"git imap-send" usage.
Move the documentation to the appropriate places.
While at it, don't encourage storing passwords in config files.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
These hints are in git's private SubmittingPatches document but a
wider audience might be interested. Move them to the "git
format-patch" manpage.
I'm not sure what gotchas these hints are meant to work around.
They might be completely false.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The standard reference for this information is the article
"Plain text e-mail - Thunderbird#Completely_plain_email" at
kb.mozillazine.org, but the hints hidden away in git's
SubmittingPatches file are more complete. Move them to the
"git format-patch" manual so they can be installed with git and
read by a wide audience.
While at it, make some tweaks:
- update "Approach #1" so it might work with Thunderbird 3;
- remove ancient version numbers from the descriptions of both
approaches so current readers might have more reason to
complain if they don't work.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
SubmittingPatches has some excellent advice about how to check a patch
for corruption before sending it off. Move it to the format-patch
manual so it can be installed with git's documentation for use by
people not necessarily interested in the git project's practices.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a DISCUSSION section to the "git format-patch" manual to encourage
people to send patches in a form that can be applied by "git am"
automatically. There are two such forms:
1. The default form in which most metadata goes in the mail header
and the message body starts with the patch description;
2. The snipsnip form in which a message starts with pertinent
discussion and ends with a patch after a "scissors" mark.
The example requires QP encoding in the "Subject:" header intended for
the mailer to give the reader a chance to reflect on that, rather than
being startled by it later. By contrast, in-body "From:" and
"Subject:" lines should be human-readable and not QP encoded.
Inspired-by: Jim Meyering <jim@meyering.net>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Improved-by: Junio C Hamano <gitster@pobox.com>
Improved-by: Drew Northup <drew.northup@maine.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The point of these sections is generally to:
1. Give credit where it is due.
2. Give the reader an idea of where to ask questions or
file bug reports.
But they don't do a good job of either case. For (1), they
are out of date and incomplete. A much more accurate answer
can be gotten through shortlog or blame. For (2), the
correct contact point is generally git@vger, and even if you
wanted to cc the contact point, the out-of-date and
incomplete fields mean you're likely sending to somebody
useless.
So let's drop the fields entirely from all manpages except
git(1) itself. We already point people to the mailing list
for bug reports there, and we can update the Authors section
to give credit to the major contributors and point to
shortlog and blame for more information.
Each page has a "This is part of git" footer, so people can
follow that to the main git manpage.
* maint:
Better advice on using topic branches for kernel development
Documentation: update implicit "--no-index" behavior in "git diff"
Documentation: expand 'git diff' SEE ALSO section
Documentation: diff can compare blobs
Documentation: gitrevisions is in section 7
shell portability: no "export VAR=VAL"
CodingGuidelines: reword parameter expansion section
Documentation: update-index: -z applies also to --index-info
Documentation: No argument of ALLOC_GROW should have side-effects
Fix references to gitrevisions(1) in the manual pages and HTML
documentation.
In practice, this will not matter much unless someone tries to use a
hard copy of the git reference manual.
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If the topmost three commits in a branch were merge commits, 'git
format-patch -3' used to output nothing. Since Git can't prepare
patches out of merge commits anyway, don't go over them in the first
place. 'git format-patch -3' now prepares three patches from the
topmost three commits without counting merge commits. Also add a
corresponding test in t4014-format-patch and update documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently, whenever we need documentation for revisions and ranges, we
link to the git-rev-parse man page, i.e. a plumbing man page, which has
this along with the documentation of all rev-parse modes.
Link to the new gitrevisions man page instead in all cases except
- when the actual git-rev-parse command is referred to or
- in very technical context (git-send-pack).
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
By default, git uses the version string as the signature for all
patches output by format-patch. Many employers (mine included)
require the use of a signature on all outgoing mails. In a
format-patch | send-email workflow there isn't an easy way to modify
the signature without breaking the pipe and manually replacing the
version string with the signature required. Instead of doing all that
work, add an option (--signature) and a config variable
(format.signature) to replace the default git version signature when
formatting patches.
This does modify the original behavior of format-patch a bit. First
off the version string is now placed in the cover letter by default.
Secondly, once the configuration variable format.signature is added
to the .config file there is no way to revert back to the default
git version signature. Instead, specifying the --no-signature option
will remove the signature from the patches entirely.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Has the same functionality as the '--cc' option and 'format.cc'
configuration variable but for the "To:" email header. Half of the code to
support this was already there.
With email the To: header usually more important than the Cc: header.
[jc: tests are by Stephen Boyd]
Signed-off-by: Steven Drake <sdrake@xnet.co.nz>
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
Format git commands and options consistently using back quotes
(i.e. a fixed font in the resulting HTML document).
Signed-off-by: Björn Gustavsson <bgustavsson@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This hopefully makes the relationship between threading options of
format-patch and send-email easier to grasp.
Signed-off-by: Yann Dirson <ydirson@altern.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Clarify --no-binary description using some words from the original
commit 37c22a4b (add --no-binary, 2008-05-9). Cleanup --suffix
description. Add --thread style option to synopsis and reorganize it a
bit. Clarify renaming patches example and the configuration paragraph.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Even when a sentence is started with 'shallow' or 'deep' use the
lowercase version to maintain consistency.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If you regularly create patches which require a Signed-off: line you may
want to make it your default to add that line. It also helps you not to forget
to add the -s/--signoff switch.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
format-patch supports the format.headers configuration for adding
arbitrary email headers to the patches it outputs. This patch adds
support for an --add-header argument which makes the same feature
available from the command line. This is useful when the content of
custom email headers must change from branch to branch.
This patch has been sponsored by Grant Street Group
Signed-off-by: Michael Hendricks <michael@ndrix.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Users were confused about the meaning and use of the --root option.
Notably, since 68c2ec7 (format-patch: show patch text for the root
commit, 2009-01-10), --root has nothing to do with showing the patch
text for the root commit any more.
Shorten and clarify the corresponding paragraph in the DESCRIPTION
section, document --root under OPTIONS, and add an explicit note that
root commits are formatted regardless.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
For example:
git format-patch --numbered-files --stdout --attach HEAD~~
will create two messages with files 1 and 2 attached respectively.
Without --attach/--inline but with --stdout, --numbered-files option
can be simply ignored, because we are not creating any file ourselves.
Signed-off-by: Stephen Boyd <bebarino@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* tr/format-patch-thread:
format-patch: support deep threading
format-patch: thread as reply to cover letter even with in-reply-to
format-patch: track several references
format-patch: threading test reactivation
Conflicts:
builtin-log.c
For deep threading mode, i.e., the mode that gives a thread structured
like
+ [PATCH 0/n] Cover letter
`-+ [PATCH 1/n] First patch
`-+ [PATCH 2/n] Second patch
`-+ ...
we currently have to use 'git send-email --thread' (the default). On
the other hand, format-patch also has a --thread option which gives
shallow mode, i.e.,
+ [PATCH 0/n] Cover letter
|-+ [PATCH 1/n] First patch
|-+ [PATCH 2/n] Second patch
...
To reduce the confusion resulting from having two indentically named
features in different tools giving different results, let format-patch
take an optional argument '--thread=deep' that gives the same output
as 'send-mail --thread'. With no argument, or 'shallow', behave as
before. Also add a configuration variable format.thread with the same
semantics.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
