Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Additionally, instead of
git config <key> ""
or
git config --unset <key>
uses
test_unconfig <key>
The latter doesn't failed if <key> is not defined.
Tests are modified to assume correct (default) configuration at entry,
and to reset the modified configuration variables at the end.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Additionally, instead of
git config <key> ""
or
git config --unset <key>
uses
test_unconfig <key>
The latter doesn't failed if <key> is not defined.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Tests are modified to assume correct (default) configuration at entry,
and to reset the modified configuration variables at the end.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Instead of using construct such as:
test_when_finished "git config --unset <key>"
git config <key> <value>
uses
test_config <key> <value>
The latter takes care of removing <key> at the end of the test.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
fread returns the number of items read, with no special error return.
Commit 98f85ff (reflog: add for_each_reflog_ent_reverse() API -
2013-03-08) introduced a call to fread which checks for an error with
"nread < 0" which is tautological since nread is unsigned. The correct
check in this case (which tries to read a single item) is "nread != 1".
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current message is "bisecting %s" (or "bisecting branch %s").
"%s" is the current branch when we started bisecting. Clarify that to
avoid confusion with good and bad refs passed to "bisect" command.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Logic in still_interesting function allows to stop the commits
traversing if the oldest processed commit is not older then the
youngest commit on the list to process and the list contains only
commits marked as not interesting ones. It can be premature when dealing
with a set of coequal commits. For example git rev-list A^! --not B
provides wrong answer if all commits in the range A..B had the same
commit time and there are more then 7 of them.
To fix this problem the relevant part of the logic in still_interesting
is changed to: the walk can be stopped if the oldest processed commit is
younger then the youngest commit on the list to processed.
Signed-off-by: Kacper Kornet <draenog@pld-linux.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
There are two uses of the "left" and "right" commit variables that
make it hard to be sure what values they have (both for the reader,
and for gcc, which wrongly complains that they might be used
uninitialized).
The function starts with a cascading if statement, checking that the
input sha1s exist, and finally working up to preparing a revision
walk. We only prepare the walk if the cascading conditional did not
find any problems, which we check by seeing whether it set the
"message" variable or not. It's simpler and more obvious to just add
a condition to the end of the cascade.
Later, we check the same "message" variable when deciding whether to
clear commit marks on the left/right commits; if it is set, we
presumably never started the walk. This is wrong, though; we might
have started the walk and munged commit flags, only to encounter an
error afterwards. We should always clear the flags on left/right if
they exist, whether the walk was successful or not.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Originally update-pre-post-images could assume that any whitespace
fixing will make the result only shorter by unexpanding runs of
leading SPs into HTs and removing trailing whitespaces at the end of
lines. Updating the post-image we read from the patch to match the
actual result can be performed in-place under this assumption.
These days, however, we have tab-in-indent (aka Python) rule whose
result can be longer than the original, and we do need to allocate
a larger buffer than the input and replace the result.
Fortunately the support for lengthening rewrite was already added
when we began supporting "match while ignoring whitespace
differences" mode in 86c91f9179 (git apply: option to ignore
whitespace differences, 2009-08-04). We only need to correctly
count the number of bytes necessary to hold the updated result and
tell the function to allocate a new buffer.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When asking Git to merge a tag (such as a signed tag or annotated tag),
it will always create a merge commit even if fast-forward was possible.
It's like having --no-ff present on the command line.
It's a difference from the default behavior described in git-merge.txt.
It should be documented as an exception of "FAST-FORWARD MERGE" section
and "--ff" option description.
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Reviewed-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Before talking about notations such as optional [--option] enclosed
in brackets, state that the documents are in AsciiDoc and processed
into other formats.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
diff.c: diff.renamelimit => diff.renameLimit in message
wt-status: fix possible use of uninitialized variable
fast-import: clarify "inline" logic in file_change_m
run-command: always set failed_errno in start_command
transport: drop "int cmp = cmp" hack
drop some obsolete "x = x" compiler warning hacks
fast-import: use pointer-to-pointer to keep list tail
In the warning message printed when rename or unmodified copy
detection was skipped due to too many files, change "diff.renamelimit"
to "diff.renameLimit", in order to make it consistent with git
documentation, which consistently uses "diff.renameLimit".
Signed-off-by: Max Nanasy <max.nanasy@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In wt_status_print_change_data, we accept a change_type flag
that is meant to be either WT_STATUS_UPDATED or
WT_STATUS_CHANGED. We then switch() on this value to set
the local variable "status" for each case, but do not
provide a fallback "default" label to the switch statement.
As a result, the compiler realizes that "status" might be
unset, and complains with a warning. To silence this
warning, we use the "int status = status" trick. This is
correct with the current code, as all callers provide one of
the two expected change_type flags. However, it's also a
maintenance trap, as there is nothing to prevent future
callers from passing another flag, nor to document this
assumption.
Instead of using the "x = x" hack, let's handle the default
case in the switch() statement with a die("BUG"). That tells
the compiler and any readers of the code exactly what the
function's input assumptions are.
We could also convert the flag to an enum, which would
provide a compile-time check on the function input. However,
since these flags are part of a larger enum, that would make
the code unnecessarily complex (we would have to make a new
enum with just the two flags, and then convert it to the old
enum for passing to sub-functions).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we read a fast-import line like:
M 100644 :1 foo.c
we point the local object_entry variable "oe" to the object
named by the mark ":1". When the input uses the "inline"
construct, however, we do not have such an object_entry.
The current code is careful not to access "oe" in the inline
case, but we can make the assumption even more obvious (and
catch violations of it) by setting oe to NULL and adding a
comment. As a bonus, this also squelches an over-zealous gcc
-Wuninitialized warning, which means we can drop the "oe =
oe" initialization hack.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When we fail to fork, we set the failed_errno variable to
the value of errno so it is not clobbered by later syscalls.
However, we do so in a conditional, and it is hard to see
later under what conditions the variable has a valid value.
Instead of setting it only when fork fails, let's just
always set it after forking. This is more obvious for human
readers (as we are no longer setting it as a side effect of
a strerror call), and it is more obvious to gcc, which no
longer generates a spurious -Wuninitialized warning. It also
happens to match what the WIN32 half of the #ifdef does.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
According to 47ec794, this initialization is meant to
squelch an erroneous uninitialized variable warning from gcc
4.0.1. That version is quite old at this point, and gcc 4.1
and up handle it fine, with one exception. There seems to be
a regression in gcc 4.6.3, which produces the warning;
however, gcc versions 4.4.7 and 4.7.2 do not.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In cases where the setting and access of a variable are
protected by the same conditional flag, older versions of
gcc would generate a "might be used unitialized" warning. We
silence the warning by initializing the variable to itself,
a hack that gcc recognizes.
Modern versions of gcc are smart enough to get this right,
going back to at least version 4.3.5. gcc 4.1 does get it
wrong in both cases, but is sufficiently old that we
probably don't need to care about it anymore.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
This is shorter, idiomatic, and it means the compiler does
not get confused about whether our "e" pointer is valid,
letting us drop the "e = e" hack.
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git submodule update", when recursed into sub-submodules, did not
acccumulate the prefix paths.
* we/submodule-update-prefix-output:
submodule update: when using recursion, show full path
Sort filenames read from the maildir/ in a way that is more likely
to sort messages in the order the writing MUA meant to, by sorting
numeric segment in numeric order and non-numeric segment in
alphabetical order.
* jk/mailsplit-maildir-muttsort:
mailsplit: sort maildir filenames more cleverly
When export-subst is used, "zip" output recorded incorrect
size of the file.
* rs/zip-compresssed-size-with-export-subst:
archive-zip: fix compressed size for stored export-subst files
Hooks the credential system to send-email.
* mn/send-email-works-with-credential:
git-send-email: use git credential to obtain password
Git.pm: add interface for git credential command
Git.pm: allow pipes to be closed prior to calling command_close_bidi_pipe
Git.pm: refactor command_close_bidi_pipe to use _cmd_close
Git.pm: fix example in command_close_bidi_pipe documentation
Git.pm: allow command_close_bidi_pipe to be called as method
A new read-only credential helper (in contrib/) to interact with
the .netrc/.authinfo files. Hopefully mn/send-email-authinfo topic
can rebuild on top of something like this.
* tz/credential-authinfo:
Add contrib/credentials/netrc with GPG support
Some platforms and users spell UTF-8 differently; retry with the
most official "UTF-8" when the system does not understand the
user-supplied encoding name that are the common alternative
spellings of UTF-8.
* jk/utf-8-can-be-spelled-differently:
utf8: accept alternate spellings of UTF-8
Call "gpg" using the right API when validating the signature on
tags.
* mg/gpg-interface-using-status:
pretty: make %GK output the signing key for signed commits
pretty: parse the gpg status lines rather than the output
gpg_interface: allow to request status return
log-tree: rely upon the check in the gpg_interface
gpg-interface: check good signature in a reliable way
Fix tests that contaminated their environments and affected new
tests introduced later in the sequence by containing their effects
in their own subshells.
* rt/commit-cleanup-config:
t7502: perform commits using alternate editor in a subshell
"git branch" had more cases where it did not bother to check
nonsense command line parameters.
* nd/branch-error-cases:
branch: segfault fixes and validation
perl/Git.pm::cat_blob slurped everything in core only to write it
out to a file descriptor, which was not a very smart thing to do.
* jc/perl-cat-blob:
Git.pm: fix cat_blob crashes on large files
Minor maintenance updates to difftool, and updates to its tests.
* da/difftool-fixes:
t7800: "defaults" is no longer a builtin tool name
t7800: modernize tests
t7800: update copyright notice
difftool: silence uninitialized variable warning
Correctly connect to SSL/TLS sites that serve multiple hostnames on
a single IP by including Server Name Indication in the client-hello.
* ob/imap-send-ssl-verify:
imap-send: support Server Name Indication (RFC4366)
'git commit -m "$str"' when $str was already terminated with a LF
now avoids adding an extra LF to the message.
* bc/commit-complete-lines-given-via-m-option:
Documentation/git-commit.txt: rework the --cleanup section
git-commit: only append a newline to -m mesg if necessary
t7502: demonstrate breakage with a commit message with trailing newlines
t/t7502: compare entire commit message with what was expected
"git count-objects -v" did not count leftover temporary packfiles
and other kinds of garbage.
* nd/count-garbage:
count-objects: report how much disk space taken by garbage files
count-objects: report garbage files in pack directory too
sha1_file: reorder code in prepare_packed_git_one()
git-count-objects.txt: describe each line in -v output
Allows requests to fetch objects at any tip of refs (including
hidden ones). It seems that there may be use cases even outside
Gerrit (e.g. $gmane/215701).
* jc/fetch-raw-sha1:
fetch: fetch objects by their exact SHA-1 object names
upload-pack: optionally allow fetching from the tips of hidden refs
fetch: use struct ref to represent refs to be fetched
parse_fetch_refspec(): clarify the codeflow a bit
When we know approximately how many entries we will have in the
hash-table, it makes sense to size the hash table to that number
from the beginning to avoid unnecessary rehashing.
* nd/preallocate-hash:
Preallocate hash tables when the number of inserts are known in advance
Suggest users to look into using--untracked=no option when "git
status" takes too long.
* tb/document-status-u-tradeoff:
status: advise to consider use of -u when read_directory takes too long
git status: document trade-offs in choosing parameters to the -u option
When the interactive access to git-shell is not enabled, we issue a
message meant to help the system admininstrator to enable it. Add
an explicit way to help the end users who connect to the service by
issuing custom messages to refuse such an access.
* jn/shell-disable-interactive:
shell: new no-interactive-login command to print a custom message
shell doc: emphasize purpose and security model
Clarify in the documentation "what" gets pushed to "where" when the
command line to "git push" does not say these explicitly.
* jc/maint-push-refspec-default-doc:
Documentation/git-push: clarify the description of defaults
The "Applying:" message "git am" shows to tell the user which patch
is being applied has traditionally been to help identifying the
input, but we started showing the edited result since f23272f3fd
(git-am -i: report rewritten title, 2007-12-04), because it was
found more confusing to show the original during an interactive
session.
Treat the modification by the applypatch-msg hook in a similar way
and use the edited result in the progress indication, even though
this is usually not interactive.
Signed-off-by: Simon Ruderich <simon@ruderich.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Some test scripts use the GIT_TRACE mechanism to dump
debugging information to descriptor 3 (and point it to a
file using the shell). On Windows, however, bash is unable
to set up descriptor 3. We do not write our trace to the
file, and worse, we may interfere with other operations
happening on descriptor 3, causing tests to fail or even
behave inconsistently.
Prior to commit 97a83fa (upload-pack: remove packet debugging
harness), these tests used GIT_DEBUG_SEND_PACK, which only
supported output to a descriptor. The tests in t5503 were
always broken on Windows, and were marked to be skipped via
the NOT_MINGW prerequisite. In t5700, the tests used to pass
prior to 97a83fa, but only because they were not careful
enough; because we only grepped the trace file, an empty
file looked successful to us. But post-97a83fa, the writing
to descriptor 3 causes "git fetch" to hang (presumably
because we are throwing random bytes into the middle of the
protocol).
Now that we are using the GIT_TRACE mechanism, we can
improve both scripts by asking git to write directly to a
file rather than a descriptor. That fixes the hang in t5700,
and should allow t5503 to successfully run on Windows.
In both cases we now also use "test -s" to double-check that
our trace file actually contains output, which should reduce
the possibility of an erroneously passing test.
Signed-off-by: Jeff King <peff@peff.net>
Tested-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Style is inconsistent throughout the file. Make the following
changes:
1. Indent everything with tabs.
2. Put the opening quote (') for the test in the same line as
test_expect_success, and the closing quote on a line by itself.
3. Do not add extra space between redirection operator and filename,
i.e. "cmd >dst", not "cmd > dst".
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Commit 38a4556 (index-pack: start learning to emulate
"verify-pack -v", 2011-06-03) added a "delta_depth" counter
to each "struct object_entry". Initially, all object entries
have their depth set to 0; in resolve_delta, we then set the
depth of each delta to "base + 1". Base entries never have
their depth touched, and remain at 0.
To ensure that all depths start at 0, that commit changed
calls to xmalloc the object_entry list into calls to
xcalloc. However, it forgot that we grow the list with
xrealloc later. These extra entries are used when we add an
object from elsewhere to complete a thin pack. If we add a
non-delta object, its depth value will just be uninitialized
heap data.
This patch fixes it by zero-initializing entries we add to
the objects list via the xrealloc.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
MSYS bash considers the part "/g" in the sed expression "s/./=/g" as an
absolute path after an assignment, and mangles it to a C:/something
string. Do not attract bash's attention by avoiding the equals sign.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
