Unlike "git rev-parse --show-cdup", "--show-prefix" did not give an
empty line when run at the top of the working tree.
By Ross Lagerwall
* rl/show-empty-prefix:
rev-parse --show-prefix: add in trailing newline
This option was not yet described in the gitmodules documentation. We
only described it in the 'git submodule' command documentation but
gitmodules is the more natural place to look.
A short reference in the 'git submodule' documentation should be
sufficient since the details can now be found in the documentation to
gitmodules.
Signed-off-by: Heiko Voigt <hvoigt@hvoigt.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git status --porcelain" ignored "--branch" option by mistake. The output
for "git status --branch -z" was also incorrect and did not terminate the
record for the current branch name with NUL as asked.
By Jeff King
via Jeff King
* jk/status-porcelain-z-b:
status: refactor colopts handling
status: respect "-b" for porcelain format
status: fix null termination with "-b"
status: refactor null_termination option
commit: refactor option parsing
Some time ago, "git clone" lost the progress output for its "checkout"
phase; when run without any "--quiet" option, it should give progress to
the lengthy operation.
By Erik Faye-Lund
* ef/maint-clone-progress-fix:
clone: fix progress-regression
When checking out another commit from an already detached state, we used
to report all commits that are not reachable from any of the refs as
lossage, but some of them might be reachable from the new HEAD, and there
is no need to warn about them.
By Johannes Sixt
* js/checkout-detach-count:
checkout (detached): truncate list of orphaned commits at the new HEAD
t2020-checkout-detach: check for the number of orphaned commits
Your build platform may support hardlinks but you may prefer not to use
them, e.g. when installing to DESTDIR to make a tarball and untarring on
a filesystem that has poor support for hardlinks.
The Makefile in git-gui project may need to learn to honor the same
setting; it unconditionally creates git-citool by hardlinking git-gui.
* jc/install-no-hardlinks:
Makefile: NO_INSTALL_HARDLINKS
Stream large blobs directly out to archive files without slurping
everything in memory first.
By René Scharfe (6) and Nguyễn Thái Ngọc Duy (4)
* nd/stream-to-archive:
t5000: rationalize unzip tests
archive-zip: streaming for deflated files
archive-zip: streaming for stored files
archive-zip: factor out helpers for writing sizes and CRC
archive-zip: remove uncompressed_size
archive-tar: stream large blobs to tar file
archive: delegate blob reading to backend
archive-tar: unindent write_tar_entry by one level
archive-tar: turn write_tar_entry into blob-writing only
streaming: void pointer instead of char pointer
Refs API is updated to lazily read sub-hierarchies of refs/ namespace,
so that we do not have to grab everything from the filesystem when we
are only interested in listing branches, for example.
By Michael Haggerty (17) and Junio C Hamano (1)
* mh/ref-api-lazy-loose:
refs: fix find_containing_dir() regression
refs: read loose references lazily
read_loose_refs(): eliminate ref_cache argument
struct ref_dir: store a reference to the enclosing ref_cache
search_for_subdir(): return (ref_dir *) instead of (ref_entry *)
get_ref_dir(): add function for getting a ref_dir from a ref_entry
read_loose_refs(): rename function from get_ref_dir()
refs: wrap top-level ref_dirs in ref_entries
find_containing_dir(): use strbuf in implementation of this function
bisect: copy filename string obtained from git_path()
do_for_each_reflog(): use a strbuf to hold logfile name
do_for_each_reflog(): return early on error
get_ref_dir(): take the containing directory as argument
refs.c: extract function search_for_subdir()
get_ref_dir(): require that the dirname argument ends in '/'
get_ref_dir(): rename "base" parameter to "dirname"
get_ref_dir(): use a strbuf to hold refname
get_ref_dir(): return early if directory cannot be read
"git push" over smart-http lost progress output a few releases ago.
By Jeff King
* jk/maint-push-progress:
t5541: test more combinations of --progress
teach send-pack about --[no-]progress
send-pack: show progress when isatty(2)
A contrib script "rerere-train" did not work out of the box unless user
futzed with her $PATH.
* jc/rerere-train:
contrib/rerere-train: use installed git-sh-setup
"log --graph" was not very friendly with "--stat" option and its output
had line breaks at wrong places.
By Lucian Poston (5) and Zbigniew Jędrzejewski-Szmek (3)
* lp/diffstat-with-graph:
t4052: work around shells unable to set COLUMNS to 1
test-lib: skip test with COLUMNS=1 under mksh
Prevent graph_width of stat width from falling below min
t4052: Test diff-stat output with minimum columns
t4052: Adjust --graph --stat output for prefixes
Adjust stat width calculations to take --graph output into account
Add output_prefix_length to diff_options
t4052: test --stat output with --graph
The functions xdl_cha_first(), xdl_cha_next() and xdl_atol() are not used
by us. While removing them increases the difference to the upstream
version of libxdiff, it only adds a bit to the more than 600 differing
lines in xutils.c (mmfile_t management was simplified significantly when
the library was imported initially). Besides, if upstream modifies these
functions in the future, we won't need to think about importing those
changes, so in that sense it makes tracking modifications easier.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use handle_split_cb() directly as hunk_func() callback, without going
through xdi_diff_hunks().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use blame_chunk_cb() directly as hunk_func() callback, without detour
through xdi_diff_hunks().
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a way to register a callback function that is gets passed the
start line and line count of each hunk of a diff. Only standard
types are used.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In abe1998 ("git checkout -b: allow switching out of an unborn
branch"), a code-path overly-optimisticly assumed that a
branch-name was specified. This is not always the case, and as
a result a NULL-pointer was attempted printed to .git/HEAD.
This could lead to at least two different failure modes:
1) vsnprintf formated the NULL-string as something useful (e.g
"(null)")
2) vsnprintf crashed
Neither were very convenient for formatting a new HEAD-reference.
To fix this, reintroduce some strictness so we only take this
new codepath if a banch-name was specified.
Signed-off-by: Erik Faye-Lund <kusmabite@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
It marks the string "...inconsistent %s filename..." where %s is either
"old" or "new" from caller. Make it two strings "...inconsistent new
filename..." and "...inconsistent old filename...".
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Translate one new messages came from git.pot
update in 7795e42 (l10n: Update git.pot (1 new messages)).
It also updates and reformats the de.po file due to "msgmerge".
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
A list of improvements for German translation
which contains a couple of spellings and grammar.
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
The word "remote" was translated as "entfernt"
and "anders". Both of them aren't really good
because "anders" in German means "other" and
"entfernt" has two different meanings and could
result in confusion to the users.
We've changed the translation to "extern".
Suggested-by: Jan Krüger <jk@jk.gs>
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
The word "track" was translated as "verfolgen"
and "folgen". We've decided to translate "track" in
the meaning of tracked files/content as "beobachten"
and in the remote-tracking sense as "folgen".
Suggested-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
A long list of suggested changes to the translation. None of them are
clear-cut, though I of course think they are an improvement ;-)
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
"schlecht" doesn't quite sound right to me, especially in messages
like "bad object" where the object doesn't even exist in the first
place.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
These are all obviously wrong, such as typos or messages where the
current translation is based on a misunderstanding of the original
message.
Signed-off-by: Thomas Rast <trast@student.ethz.ch>
Signed-off-by: Ralf Thielow <ralf.thielow@googlemail.com>
The functions read_directory_recursive() and treat_leading_path() both
use buffers sized to fit PATH_MAX characters. The latter can be made to
overrun its buffer, e.g. like this:
$ a=0123456789abcdef
$ a=$a$a$a$a$a$a$a$a
$ a=$a$a$a$a$a$a$a$a
$ a=$a$a$a$a$a$a$a$a
$ git add $a/a
Instead of trying to add a check and potentionally forgetting to address
similar cases, convert the involved functions and their helpers to use
struct strbuf. The patch is suprisingly large because the helpers
treat_path() and treat_one_path() modify the buffer as well and thus need
to be converted, too.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current code reads the config and command-line options
into a separate "colopts" variable, and then copies the
contents of that variable into the "struct wt_status". We
can eliminate the extra variable and copy just write
straight into the wt_status struct.
This simplifies the "status" code a little bit.
Unfortunately, it makes the "commit" code one line more
complex; a side effect of the separate variable was that
"commit" did not copy the colopts variable, so any
column.status configuration had no effect.
The result still ends up cleaner, though. In the previous
version, it was unclear whether commit simply forgot to copy
the colopt variable, or whether it was intentional. Now it
explicitly turns off column options. Furthermore, if commit
later learns to respect column.status, this will make the
end result simpler. I punted on just adding that feature
now, because it was sufficiently non-obvious that it should
not go into a refactoring patch.
Signed-off-by: Jeff King <peff@peff.net>
There is no reason not to, as the user has to explicitly ask
for it, so we are not breaking compatibility by doing so. We
can do this simply by moving the "show_branch" flag into
the wt_status struct. As a bonus, this saves us from passing
it explicitly, simplifying the code.
Signed-off-by: Jeff King <peff@peff.net>
