This removes the flag internally used by revision traversal to
decide which commits are indeed boundaries and renames it to
CHILD_SHOWN. builtin-bundle uses the symbol for its
verification, but I think the logic it uses it is wrong. The
flag is still useful but it is local to the git-bundle, so it is
renamed to PREREQ_MARK.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This cleans up the boundary processing in the commit walker. It
- rips out the boundary logic from the commit walker. Placing
"negative" commits in the revs->commits list was Ok if all we
cared about "boundary" was the UNINTERESTING limiting case,
but conceptually it was wrong.
- makes get_revision_1() function to walk the commits and return
the results as if there is no funny postprocessing flags such
as --reverse, --skip nor --max-count.
- makes get_revision() function the postprocessing phase:
If reverse is given, wait for get_revision_1() to give
everything that it would normally give, and then reverse it
before consuming.
If skip is given, skip that many before going further.
If max is given, stop when we gave out that many.
Now that we are about to return one positive commit, mark
the parents of that commit to be potential boundaries
before returning, iff we are doing the boundary processing.
Return the commit.
- After get_revision() finishes giving out all the positive
commits, if we are doing the boundary processing, we look at
the parents that we marked as potential boundaries earlier,
see if they are really boundaries, and give them out.
It loses more code than it adds, even when the new gc_boundary()
function, which is purely for early optimization, is counted.
Note that this patch is purely for eyeballing and discussion
only. It breaks git-bundle's verify logic because the logic
does not use BOUNDARY_SHOW flag for its internal computation
anymore. After we correct it not to attempt to affect the
boundary processing by setting the BOUNDARY_SHOW flag, we can
remove BOUNDARY_SHOW from revision.h and use that bit assignment
for the new CHILD_SHOWN flag.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Per Junio's suggestion we are setting 'make' to be quiet by default,
with `make V=1` available to force GNU make back to its default
behavior of showing each command it is running.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
I find it difficult to see compiler warnings amongst the massive
spewing produced by GNU make as it works through our productions.
This is especially true if CFLAGS winds up being rather long, due
to a large number of -W options being enabled and due to a number
of -D options being configured/required by my platform.
By defining QUIET_MAKE (e.g. make QUIET_MAKE=YesPlease) during
compilation users will get a less verbose output, such as:
...
CC builtin-grep.c
builtin-grep.c:187: warning: 'external_grep' defined but not used
CC builtin-init-db.c
CC builtin-log.c
CC builtin-ls-files.c
CC builtin-ls-tree.c
...
The verbose (normal make) output is still the default.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
git-gui: Make 'make' quieter by default
git-gui: Remove unnecessary /dev/null redirection.
git-gui: Don't create empty (same tree as parent) commits.
git-gui: Add Reset to the Branch menu.
git-gui: Relocate the menu/transport menu code.
* 'master' of git://repo.or.cz/git-gui:
git-gui: Make 'make' quieter by default
git-gui: Remove unnecessary /dev/null redirection.
git-gui: Don't create empty (same tree as parent) commits.
git-gui: Add Reset to the Branch menu.
git-gui: Relocate the menu/transport menu code.
The handcrafted built-in rev-list lookalike forgot to mark the trees
and blobs contained in the boundary commits uninteresting, resulting
in unnecessary objects in the pack.
Signed-off-by: Junio C Hamano <junkio@cox.net>
To fit nicely into the output of the git.git project's own quieter
Makefile, we want to make the git-gui Makefile nice and quiet too.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Somewhere along the line (in abd6970a) git-revert.sh learned to
omit the private object name from the new commit message *unless*
-x was supplied on the command line by the user.
The way this was implemented is really non-obvious in the original
script. Setting replay=t (the default) means we don't include the
the private object name, while setting reply='' (the -x flag) means
we should include the private object name. These two settings now
relate to the replay=1 and replay=0 cases in the C version, so we
need to negate replay to test it is 0.
I also noticed the C version was adding an extra LF in the -x case,
where the older git-revert.sh was not.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'master-for-junio' of git://repo.or.cz/git/fastimport:
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
* maint:
Fix diff-options references in git-diff and git-format-patch
Add definition of <commit-ish> to the main git man page.
Begin SubmittingPatches with a check list
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
Most of the git-diff-* documentation used [<common diff options>]
instead of [--diff-options], so make that change in git-diff and
git-format-patch.
In addition, git-format-patch didn't include the meanings of the diff
options.
Signed-off-by: Brian Gernhardt <benji@silverinsanity.com>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'maint-for-junio' of git://repo.or.cz/git/fastimport:
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
It seems that some people prefer a short list to a long text. But even for
the latter group, a quick reminder list is useful. So, add a check list to
Documentation/SubmittingPatches of what to do to get your patch accepted.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
fast-import: Fail if a non-existant commit is used for merge
fast-import: Avoid infinite loop after reset
[sp: Minor evil merge to deal with type_names array moving
to be private in 'master'.]
Johannes Sixt noticed during one of his own imports that fast-import
did not fail if a non-existant commit is referenced by SHA-1 value
as an argument to the 'merge' command. This allowed the user to
unknowingly create commits that would fail in fsck, as the commit
contents would not be completely reachable.
A side effect of this bug was that a frontend process could mark
any SHA-1 object (blob, tree, tag) as a parent of a merge commit.
This should also fail in fsck, as the commit is not a valid commit.
We now use the same rule as the 'from' command. If a commit is
referenced in the 'merge' command by hex formatted SHA-1 then the
SHA-1 must be a commit or a tag that can be peeled back to a commit,
the commit must already exist, and must be readable by the core Git
infrastructure code. This requirement means that the commit must
have existed prior to fast-import starting, or the commit must have
been flushed out by a prior 'checkpoint' command.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
Johannes Sixt noticed that a 'reset' command applied to a branch that
is already active in the branch LRU cache can cause fast-import to
relink the same branch into the LRU cache twice. This will cause
the LRU cache to contain a cycle, making unload_one_branch run in an
infinite loop as it tries to select the oldest branch for eviction.
I have trivially fixed the problem by adding an active bit to
each branch object; this bit indicates if the branch is already
in the LRU and allows us to avoid trying to add it a second time.
Converting the pack_id field into a bitfield makes this change take
up no additional memory.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org>
git-fsck always exited with status 0, which was a bit sloppy.
This makes it exit with a non-zero status when errors are
found. The error code is an OR'ed result of:
1 if corrupted objects are found.
2 if objects that are ought to be reachable are missing or corrupt.
For example, it would exit with 1 in a repository with an
unreachable corrupt object. If a tree object of the HEAD commit
is corrupt, you would get 3.
Signed-off-by: Junio C Hamano <junkio@cox.net>
We did not detect broken loose object files, either when
underlying inflate() signalled the breakage, nor inflate()
finished and we had garbage trailing at the end. We do better
now.
We also make unpack_sha1_file() a static function to
sha1_file.c, since it is not used by anybody outside.
Signed-off-by: Junio C Hamano <junkio@cox.net>
When "git fsck" without --full found a loose object missing
because it was broken, it mistakenly thought it was not parsed
because we found it in one of the packs. Back when this code
was written, we did not have a way to explicitly check if we
have the object in pack, but we do now.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add git-blame as a candidate to the byte-compilation.
batch-byte-compile is the prefered way to byte-compile files in
batch mode. Use it instead of the interactive function.
Signed-off-by: Xavier Maillard <zedek@gnu.org>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Update the main git.html page to point at 1.5.0.3 documentation.
Update draft 1.5.1 release notes with what we have so far.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Panagiotis Issaris reports that some MUAs seem not to like
folded "content-type" and "content-disposition" headers, so this
makes format-patch --attach output to avoid them.
Signed-off-by: Junio C Hamano <junkio@cox.net>
The existing --attach option did not create a true "attachment"
but multipart/mixed with Content-Disposition: inline. It should
have been with Content-Disposition: attachment.
Introduce --inline to add multipart/mixed that is inlined, and
make --attach to create an attachement.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* 'js/fetch-progress' (early part):
Fixup no-progress for fetch & clone
fetch & clone: do not output progress when not on a tty
Conflicts:
git-fetch.sh
* js/symlink:
Tell multi-parent diff about core.symlinks.
Handle core.symlinks=false case in merge-recursive.
Add core.symlinks to mark filesystems that do not support symbolic links.
* maint:
GIT 1.5.0.3
glossary: Add definitions for dangling and unreachable objects
user-manual: more detailed merge discussion
user-manual: how to replace commits older than most recent
user-manual: insert earlier of mention content-addressable architecture
user-manual: ensure generated manual references stylesheet
user-manual: reset to ORIG_HEAD not HEAD to undo merge
Documentation: mention module option to git-cvsimport
Define "dangling" and "unreachable" objects. Modified from original
text proposed by Yasushi Shoji.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Add more details on conflict, including brief discussion of file stages.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
"Modifying" an old commit by checking it out, --amend'ing it, then
rebasing on top of it, is a slightly cumbersome technique, but I've
found it useful frequently enough to make it seem worth documenting.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The content-addressable design is too important not to be worth at least
a brief mention a little earlier on.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The generated user manual is rather hard to read thanks to the lack of
the css that's supposed to be included from docbook-xsl.css.
I'm totally ignorant of the toolchain; grubbing through xmlto and
related scripts, the easiest way I could find to ensure that the
generated html links to the stylesheet is by calling xsltproc directly.
Maybe there's some better way.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
As Linus pointed out recently on the mailing list,
git reset --hard HEAD^
doesn't undo a merge in the case where the merge did a fast-forward. So
the rcommendation here is a little dangerous.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The git-cvsimport argument that specifies a cvs module to import should
probably be included in the default example.
Signed-off-by: "J. Bruce Fields" <bfields@citi.umich.edu>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When a cherry-pick failed, we used to recommend setting environment
variables to retain the authorship. It is much easier, though, to use
the "-c" flag of git-commit.
Print this message also when merge-recursive fails (the code used to
exit(1) in that case, never reaching the proper failure path).
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
Now that "git diff" handles stdin and relative paths outside the
working tree correctly, we can convert all instances of "diff -u"
to "git diff".
This commit is really the result of
$ perl -pi.bak -e 's/diff -u/git diff/' $(git grep -l "diff -u" t/)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
(cherry picked from commit c699a40d68215c7e44a5b26117a35c8a56fbd387)
This allows us to create "new file" and "delete file" patches.
It also cleans up the code.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
The earlier commit to read from stdin was full of problems, and
this corrects them.
- The mode bits should have been set to satisify S_ISREG(); we
forgot to the S_IFREG bits and hardcoded 0644;
- We did not give escape hatch to name a path whose name is
really "-". Allow users to say "./-" for that;
- Use of xread() was not prepared to see short read (e.g. reading
from tty) nor handing read errors.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This allows you to say
echo Hello World | git diff x -
to compare the contents of file "x" with the line "Hello World".
This automatically switches to --no-index mode.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
When run from a subdirectory of a repository, the command forgot
to adjust paths given to it with prefix.
Signed-off-by: Junio C Hamano <junkio@cox.net>
This patch documents the previously undocumented option --rename-section
and adds a new option to zap an entire section.
Signed-off-by: Paolo Bonzini <bonzini@gnu.org>
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de>
Signed-off-by: Junio C Hamano <junkio@cox.net>
* maint:
Unset NO_C99_FORMAT on Cygwin.
Fix a "pointer type missmatch" warning.
Fix some "comparison is always true/false" warnings.
Fix an "implicit function definition" warning.
Fix a "label defined but unreferenced" warning.
Document the config variable format.suffix
git-merge: fail correctly when we cannot fast forward.
builtin-archive: use RUN_SETUP
Fix git-gc usage note
