When importing a repo, the time on the initial commit had been
just "now". But this causes problems when trying to share among
git-p4 repos that were created identically, although at different
times. Instead, use the time in the top-most p4 change as the
time for the git import commit.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add this missing line in one of the tests. Otherwise, on fast
machines, the following git-p4 commit will complain that nobody
edited the submission message.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Cleanup nicely when tests fail. This avoids many duplicated
lines in the tests, and adds cleanup in a couple of tests that
did not have it. When one fails, now all the rest will not
fail too.
Signed-off-by: Pete Wyckoff <pw@padd.com>
Acked-by: Luke Diamand <luke@diamand.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* maint:
Break down no-lstat() condition checks in verify_uptodate()
t7400: fix bogus test failure with symlinked trash
Documentation: clarify the invalidated tree entry format
Currently, git push --quiet produces some non-error output, e.g.:
$ git push --quiet
Unpacking objects: 100% (3/3), done.
Add the --quiet option to send-pack/receive-pack and pass it to
unpack-objects in the receive-pack codepath and to receive-pack in
the push codepath.
This fixes a bug reported for the fedora git package:
https://bugzilla.redhat.com/show_bug.cgi?id=725593
Reported-by: Jesse Keating <jkeating@redhat.com>
Cc: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it easier to grok under what conditions we can skip lstat().
While at there, shorten ie_match_stat() line for the sake of my eyes.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
One of the tests in t7400 fails if the trash directory has a
symlink anywhere in its path. E.g.:
$ mkdir /tmp/git-test
$ mkdir /tmp/git-test/real
$ ln -s real /tmp/git-test/link
$ ./t7400-submodule-basic --root=/tmp/git-test/real
...
# passed all 44 test(s)
$ ./t7400-submodule-basic --root=/tmp/git-test/link
...
not ok - 41 use superproject as upstream when path is relative and no url is set there
The failing test does:
git submodule add ../repo relative &&
...
git submodule sync relative &&
test "$(git config submodule.relative.url)" = "$submodurl/repo"
where $submodurl comes from the $TRASH_DIRECTORY the user
gave us. However, git will resolve symlinks when converting
the relative path into an absolute one, leading them to be
textually different (even though they point to the same
directory).
Fix this by asking pwd to canonicalize the name of the trash
directory for us.
Signed-off-by: Jeff King <peff@peff.net>
Acked-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git config -z -l" that gitweb uses in git_parse_project_config() to
populate %config hash returns section and key names of config
variables in lowercase (they are case insensitive). When checking
%config in git_get_project_config() we have to take it into account.
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The new process's error output may be redirected elsewhere, but if
the exec fails, output should still go to the parent's stderr. This
has already been done for the die_routine. Do the same for
error_routine.
Signed-off-by: Clemens Buchacher <drizzd@aon.at>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When the entry_count is -1, the tree is invalidated and therefore has
not associated hash (or object name). Explicitly state that the next
entry starts after the newline.
Signed-off-by: Carlos Martín Nieto <cmn@elego.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When using the --quiet flag "git submodule update" and "git submodule add"
didn't behave as the documentation stated. They printed progress output
from the clone, even though they should only print error messages.
Fix that by passing the -q flag to git clone in module_clone() when the
GIT_QUIET variable is set. Two tests in t7400 have been modified to test
that behavior.
Reported-by: Daniel Holtmann-Rice <flyingtabmow@gmail.com>
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the case of a corrupt repository, git ls-tree may report an error but
presently it exits with a code of 0.
This change uses the return code of read_tree_recursive instead.
Improved-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Because of backward compatibility we cannot change gitweb to always
use /etc/gitweb.conf (i.e. even if gitweb_config.perl exists). For
common system-wide settings we therefore need separate configuration
file: /etc/gitweb-common.conf.
Long description:
gitweb currently obtains configuration from the following sources:
1. per-instance configuration file (default: gitweb_conf.perl)
2. system-wide configuration file (default: /etc/gitweb.conf)
If per-instance configuration file exists, then system-wide
configuration is _not used at all_. This is quite untypical and
suprising behavior.
Moreover it is different from way git itself treats /etc/git.conf. It
reads in stuff from /etc/git.conf and then local repos can change or
override things as needed. In fact this is quite beneficial, because
it gives site admins a simple and easy way to give an automatic hint
to a repo about things the admin would like.
On the other hand changing current behavior may lead to the situation,
where something in /etc/gitweb.conf may interfere with unintended
interaction in the local repository. One solution would be to
_require_ to do explicit include; with read_config_file() it is now
easy, as described in gitweb/README (description introduced in this
commit).
But as J.H. noticed we cannot ask people to modify their per-instance
gitweb config file to include system-wide settings, nor we can require
them to do this.
Therefore, as proposed by Junio, for gitweb to have centralized config
elements while retaining backwards compatibility, introduce separate
common system-wide configuration file, by default /etc/gitweb-common.conf
Noticed-by: Drew Northup <drew.northup@maine.edu>
Helped-by: John 'Warthog9' Hawley <warthog9@kernel.org>
Inspired-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jakub Narebski <jnareb@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
On modern multi-core processors "make test" is often run in multiple jobs.
If one of them fails the test run does stop, but the concurrently running
tests finish their run. It is rather easy to find out which test failed by
doing a "ls -d t/trash*". But that only works when you don't use the "-i"
option to "make test" because you want to get an overview of all failing
tests. In that case all thrash directories are deleted end and the
information which tests failed is lost.
If one or more tests failed, print a list of them before the test summary:
failed test(s): t1000 t6500
fixed 0
success 7638
failed 3
broken 49
total 7723
This makes it possible to just run the test suite with -i and collect all
failed test scripts at the end for further examination.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Expected to fail at this commit, fixed by subsequent commit.
Additional tests of adhoc or uncategorised nature should be added to this
file.
Improved-by: Jens Lehmann <Jens.Lehmann@web.de>
Improved-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jon Seymour <jon.seymour@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jk/tag-contains-ab:
Revert clock-skew based attempt to optimize tag --contains traversal
git skew: a tool to find how big a clock skew exists in the history
default core.clockskew variable to one day
limit "contains" traversals based on commit timestamp
tag: speed up --contains calculation
Kirill Smelkov noticed that post-1.7.6 "git checkout"
started leaking tons of memory. The streaming_write_entry
function properly calls close_istream(), but that function
did not actually free() the allocated git_istream struct.
The git_istream struct is totally opaque to calling code,
and must be heap-allocated by open_istream. Therefore it's
not appropriate for callers to have to free it.
This patch makes close_istream() into "close and de-allocate
all associated resources". We could add a new "free_istream"
call, but there's not much point in letting callers inspect
the istream after close. And this patch's semantics make us
match fopen/fclose, which is well-known and understood.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* jn/gitweb-search:
gitweb: Make git_search_* subroutines render whole pages
gitweb: Clean up code in git_search_* subroutines
gitweb: Split body of git_search into subroutines
gitweb: Check permissions first in git_search
* jl/submodule-add-relurl-wo-upstream:
submodule add: clean up duplicated code
submodule add: allow relative repository path even when no url is set
submodule add: test failure when url is not configured in superproject
Conflicts:
git-submodule.sh
* maint:
doc/fast-import: clarify notemodify command
Documentation: minor grammatical fix in rev-list-options.txt
Documentation: git-filter-branch honors replacement refs
remote-curl: Add a format check to parsing of info/refs
git-config: Remove extra whitespaces
The "notemodify" fast-import command was introduced in commit a8dd2e7
(fast-import: Add support for importing commit notes, 2009-10-09)
The commit log has slightly different description than the added
documentation. The latter is somewhat confusing. "notemodify" is a
subcommand of "commit" command used to add a note for some commit.
Does this note annotate the commit produced by the "commit" command
or a commit given by it's committish parameter? Which notes tree
does it write notes to?
The exact meaning could be deduced with old description and some
notes machinery knowledge. But let's make it more obvious. This
command is used in a context like "commit refs/notes/test" to
add or rewrite an annotation for a committish parameter. So the
advised way to add notes in a fast-import stream is:
1) import some commits (optional)
2) prepare a "commit" to the notes tree:
2.1) choose notes ref, committer, log message, etc.
2.2) create annotations with "notemodify", where each can refer to
a commit being annotated via a branch name, import mark reference,
sha1 and other expressions specified in the Documentation.
Signed-off-by: Dmitry Ivankov <divanorama@gmail.com>
Acked-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The reset command creates its reflog entry from argv.
However, it does so after having run parse_options, which
means the only thing left in argv is any non-option
arguments. Thus you would end up with confusing reflog
entries like:
$ git reset --hard HEAD^
$ git reset --soft HEAD@{1}
$ git log -2 -g --oneline
8e46cad HEAD@{0}: HEAD@{1}: updating HEAD
1eb9486 HEAD@{1}: HEAD^: updating HEAD
However, we must also consider that some scripts may set
GIT_REFLOG_ACTION before calling reset, and we need to show
their reflog action (with our text appended). For example:
rebase -i (squash): updating HEAD
On top of that, we also set the ORIG_HEAD reflog action
(even though it doesn't generally exist). In that case, the
reset argument is somewhat meaningless, as it has nothing to
do with what's in ORIG_HEAD.
This patch changes the reset reflog code to show:
$GIT_REFLOG_ACTION: updating {HEAD,ORIG_HEAD}
as before, but only if GIT_REFLOG_ACTION is set. Otherwise,
show:
reset: moving to $rev
for HEAD, and:
reset: updating ORIG_HEAD
for ORIG_HEAD (this is still somewhat superfluous, since we
are in the ORIG_HEAD reflog, obviously, but at least we now
mention which command was used to update it).
While we're at it, we can clean up the code a bit:
- Use strbufs to make the message.
- Use the "rev" parameter instead of showing all options.
This makes more sense, since it is the only thing
impacting the writing of the ref.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Test pushing, pulling, and mirroring of repositories with ref
namespaces.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Jamey Sharp <jamey@minilop.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Make it clear that git-filter-branch will honor and make permanent
replacement refs as well as grafts.
Signed-off-by: Peter Collingbourne <peter@pcc.me.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When parsing info/refs, no checks were applied that the file was in
the requried format. Since the file is read from a remote webserver,
this isn't guarenteed to be true. Add a check that the file at least
only contains lines that consist of 40 characters followed by a tab
and then the ref name.
Signed-off-by: Julian Phillips <julian@quantumfyre.co.uk>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Add a $(uname_S) case for Minix with the correct options.
Minix's linker needs all libraries specified explicitly.
Add NEEDS_SSL_WITH_CURL to add -lssl when using -lcurl.
Add NEEDS_IDN_WITH_CURL to add -lidn when using -lcurl.
When NEEDS_SSL_WITH_CURL is defined and NEEDS_CRYPTO_WITH_SSL
is defined, add -lcrypt to CURL_LIBCURL.
Change OPENSSL_LINK to OPENSSL_LIBSSL in the
NEEDS_CRYPTO_WITH_SSL conditional in the libopenssl
section. Libraries go in OPENSSL_LIBSSL, OPENSSL_LINK
is for linker flags.
Signed-off-by: Thomas Cort <tcort@minix3.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remove extra whitespaces introduced by commits
01ebb9dc and fc1905bb
Signed-off-by: Pavan Kumar Sunkara <pavan.sss1991@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The test4012.png test vector file that was originally used for t4012 to
check operations on binary files was later reused in other tests, making
it no longer consistent to name it after a specific test. Rename it to more
generic "test-binary-1.png".
While at it, rename test9200b to "test-binary-2.png" (even though it is
only used by t9200).
Signed-off-by: Vitaliy Ivanov <vitalivanov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Remote helpers do not support deleting refs by means of the 'export'
command sincethe fast-import protocol does not support it.
Check explicitly for deleted refs and die early.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that the gitdir location is exported as an environment variable
this can be implemented elegantly without requiring any explicit
flushes nor an ad-hoc exchange of values.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the refspec capability could not be listed as
required or their parsing would break.
Most likely the reason the second hunk wasn't caught is because the
series that added 'refspec' as capability, and the one that added
required capabilities were done in parallel.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Currently the helper must somehow guess how many import statements to
read before it starts outputting its fast-export stream. This is
because the remote helper infrastructure runs fast-import only once,
so the helper is forced to output one stream for all import commands
it will receive. The only reason this worked in the past was because
only one ref was imported at a time.
Change the semantics of the import statement such that it matches
that of the push statement. That is, the import statement is followed
by a series of import statements that are terminated by a '\n'.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Also add check_output from python 2.7.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In other words, use fast-export --use-done-feature to add a 'done'
command at the end of streams passed to remote helpers' "import"
commands, and teach the remote helpers implementing "export" to use
the 'done' command in turn when producing their streams.
The trailing \n in the protocol signals the helper that the
connection is about to close, allowing it to do whatever cleanup
neccesary.
Previously, the connection would already be closed by the
time the trailing \n was to be written. Now that the remote-helper
protocol uses the new done command in its fast-import streams, this
is no longer the case and we can safely write the trailing \n.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Previously the status code of all helpers were ignored, allowing
errors that occur to go unnoticed if the error text output by the
helper is not noticed.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The update ref status part of push is useful for the export command
as well, factor it out into it's own function.
Also factor out push_update_ref_status to avoid a long loop without
an explicit condition with a non-trivial body.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If fast-export is being used to generate a fast-import stream that
will be used afterwards it is desirable to indicate the end of the
stream with the new 'done' command.
Add a flag that causes fast-export to end with 'done'.
Signed-off-by: Sverre Rabbelier <srabbelier@gmail.com>
Acked-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
