* remotes/trast-doc/for-next:
Documentation: spell 'git cmd' without dash throughout
Documentation: format full commands in typewriter font
Documentation: warn prominently against merging with dirty trees
Documentation/git-merge: reword references to "remote" and "pull"
Conflicts:
Documentation/config.txt
Documentation/git-config.txt
Documentation/git-merge.txt
Lift the explanation of -CCC option in the source to the documentation.
Signed-off-by: Ramkumar Ramachandra <artagnon@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The documentation was quite inconsistent when spelling 'git cmd' if it
only refers to the program, not to some specific invocation syntax:
both 'git-cmd' and 'git cmd' spellings exist.
The current trend goes towards dashless forms, and there is precedent
in 647ac70 (git-svn.txt: stop using dash-form of commands.,
2009-07-07) to actively eliminate the dashed variants.
Replace 'git-cmd' with 'git cmd' throughout, except where git-shell,
git-cvsserver, git-upload-pack, git-receive-pack, and
git-upload-archive are concerned, because those really live in the
$PATH.
This was introduced in 85af7929ee but
not documented outside the commit message.
Signed-off-by: Matthieu Moy <Matthieu.Moy@imag.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Include it directly from git-shortlog.txt, and refer
to it from pretty-format.txt.
Signed-off-by: Marius Storm-Olsen <marius@trolltech.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The names of git commands are not meant to be entered at the
commandline; they are just names. So we render them in italics,
as is usual for command names in manpages.
Using
doit () {
perl -e 'for (<>) { s/\`(git-[^\`.]*)\`/'\''\1'\''/g; print }'
}
for i in git*.txt config.txt diff*.txt blame*.txt fetch*.txt i18n.txt \
merge*.txt pretty*.txt pull*.txt rev*.txt urls*.txt
do
doit <"$i" >"$i+" && mv "$i+" "$i"
done
git diff
.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Following what appears to be the predominant style, format
names of commands and commandlines both as `teletype text`.
While we're at it, add articles ("a" and "the") in some
places, italicize the name of the command in the manual page
synopsis line, and add a comma or two where it seems appropriate.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since the git-* commands are not installed in $(bindir), using
"git-command <parameters>" in examples in the documentation is
not a good idea. On the other hand, it is nice to be able to
refer to each command using one hyphenated word. (There is no
escaping it, anyway: man page names cannot have spaces in them.)
This patch retains the dash in naming an operation, command,
program, process, or action. Complete command lines that can
be entered at a shell (i.e., without options omitted) are
made to use the dashless form.
The changes consist only of replacing some spaces with hyphens
and vice versa. After a "s/ /-/g", the unpatched and patched
versions are identical.
Signed-off-by: Jonathan Nieder <jrnieder@uchicago.edu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The OPTIONS section of a documentation file contains a list
of the options a git command accepts.
Currently there are several variants to describe the case that
different options (almost) do the same in the OPTIONS section.
Some are:
-f, --foo::
-f|--foo::
-f | --foo::
But AsciiDoc has the special form:
-f::
--foo::
This patch applies this form to the documentation of the whole git suite,
and removes useless em-dash prevention, so \--foo becomes --foo.
Signed-off-by: Stephan Beyer <s-beyer@gmx.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As the "git" man page describes the "git" command at the end-user
level, it seems better to move it to man section 1.
Signed-off-by: Christian Couder <chriscool@tuxfamily.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Between AsciiDoc 8.2.2 and 8.2.3, the following change was made to the stock
Asciidoc configuration:
@@ -149,7 +153,10 @@
# Inline macros.
# Backslash prefix required for escape processing.
# (?s) re flag for line spanning.
-(?su)[\\]?(?P<name>\w(\w|-)*?):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
+# Explicit so they can be nested.
+(?su)[\\]?(?P<name>(http|https|ftp|file|mailto|callto|image|link)):(?P<target>\S*?)(\[(?P<attrlist>.*?)\])=
+
# Anchor: [[[id]]]. Bibliographic anchor.
(?su)[\\]?\[\[\[(?P<attrlist>[\w][\w-]*?)\]\]\]=anchor3
# Anchor: [[id,xreflabel]]
This default regex now matches explicit values, and unfortunately in this
case gitlink was being matched by just 'link', causing the wrong inline
macro template to be applied. By renaming the macro, we can avoid being
matched by the wrong regex.
Signed-off-by: Dan McGee <dpmcgee@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When refactoring code to split one iteration of a too deeply
nested loop into a separate function, it inevitably makes the
indentation levels shallower (that's the sole point of such a
refactoring). With "git blame -w", you can ignore such
re-indentation and pass blame for such moved lines to the
parent.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With this "git blame -b -s HEAD~n..HEAD" becomes a nicer way to
review the result of recent changes in context.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Moved options that pertained to both git-blame and git-annotate to a
common file blame-options.txt.
builtin-blame.c: Removed --compatibility, --long, --time from the
short usage as they are not handled in the code.
Documentation/git-blame.txt: Removed common options to git-annotate.
Added documentation for --score-debug. Removed --compatibility.
Adjusted usage at top to not wrap on 80 columns.
Documentation/git-annotate.txt: Using common options blame-options.txt.
Documentation/blame-options.txt: Added -b note about associated config
option, added --root note about associated config option, added
documentation for --show-stats. Removed --long, --time, --rev-file as
those options do not really exist. Added documentation for -M/-C taking
an optional score argument for detection of moved lines.
Signed-off-by: Andrew Ruder <andy@aeruder.net>
Signed-off-by: Junio C Hamano <junkio@cox.net>
This moves the example to specify a line range with regexps to
a later part of the manual page that has similar examples.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Just make it take over blame's place. Documentation and command
have all stopped mentioning "git-pickaxe". The built-in synonym
is left in the command table, so you can still say "git pickaxe",
but it probably is a good idea to retire it as well.
Signed-off-by: Junio C Hamano <junkio@cox.net>
New options --show-name, --show-number and --porcelain were not
documented. Also add -p as a short-hand for --porcelain for
consistency.
Signed-off-by: Junio C Hamano <junkio@cox.net>
Inspired by the cvs annotate documentation improve and expand the man page
to also mention the limitations of file annotations. Since people coming
from the SVN/CVS world might first look here, also briefly advertise how
the pickaxe interface makes it easy to go beyond these limitation.
Signed-off-by: Jonas Fonseca <fonseca@diku.dk>
Signed-off-by: Junio C Hamano <junkio@cox.net>
fix the usage string and clean up the docs while we are at it
Signed-off-by: Fredrik Kuivinen <freku045@student.liu.se>
Signed-off-by: Junio C Hamano <junkio@cox.net>
